Mahanadi Coalfields Limited Tender

Half brick masonry with Fly Ash Brick (230x115x75 mm size)bricks of class designation 10 in superstructure above plinthlevel up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with Fly Ash Brick (230x115x75 mm size) bricksof class designation 10 in superstructure above plinth levelup to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Finishing walls with Acrylic Smooth exterior paint of required shade : :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat ofexterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work

G.I Barbed wire Fencing 1.2 metre high Providing and fixing 1.2 metres high GI barbed wire (weighing 9.38 kg per 100 mts.) fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metrescenter to center founded in M15 grade cement concrete, 0.6 metre below ground level,every 15th post, last but one end post and corner post shall be strutted on both sidesand end post on one side only and provided with 9 horizontal lines and 2 diagonalsinterwoven with horizontal wires, fixed with GI staples, turn buckles etc complete asper clause 808

Felling trees of the girth (measured at a height of 1 m above ground level), includingcutting of trunks and branches, removing the roots and stacking of serviceable materialand disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Cleaning of drains including removal of earth/ slush/ mud/silt etc. from drains including disposal of the same within alead of 50 metres.

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete.

CEMENT CONCRETE (CAST - IN- SITU): Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Carriage of garbage or earth mixed other wastes by tractortrolley including manual loading and unloading and disposingat garbage dumps or at any other specified location as perthe direction of Engineer-In-Charge.(i) For lead of 1 km

Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specificationOne or more coats on old work

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Total impact of GST for the purpose of CTC