Institute Of Physics Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Institute Of Physics - IOPB Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date21 Oct 2022
Closing Date7 Nov 2022
Tender Amount₹ 33,29,472
Costs
EMD
₹ 66,590Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Renovation Of Qtrs No E-1/3 And E-1/4 In Iop Campus
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_IOPB_713191_3Bid Award Id
ViewTender No
NIT/IOP/08/2022-23Tender Authority
Institute Of Physics ViewPurchaser Address
-Website
http://https://www.iopb.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
48
-
-
Of area beyond 3 sq.meters
2
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
15 mm to 40mm nominal bore
48
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
4
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
98
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
43.5
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
12.12
-
-
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge.
32
-
-
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
4
-
-
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
2
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
56.02
-
-
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
2
-
-
(B)EARTH WORK/ANTI-TERMITE TREATMENT/SAND FILLING
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil.
20.73
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
40
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
2
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
50.2
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
72
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1cement : 2 coarse sand) to the full depth of the hole :With chlorpyriphos/Lindane E.C. 20% with 1% concentration
108
-
-
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
66
-
-
(C) CENTRING/SHUTTERING/RCC WORK
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Suspended floors, roofs, landings, balconies and access platform
2.6
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.25
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.(Make-RINL,TATA, SAIL, JINDAL,JSW etc)
10
-
-
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
2.1
-
-
(D)MASONRY WORK:
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
1.2
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:3 (1 cement :3 coarse sand)
9.45
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
9.45
-
-
(E ) CLADDING WORKS:
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.area of slab up to 0.50 Sqm
-
-
-
Granite stone slab colour black, Cherry/Ruby red
13.02
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
10.2
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Make-Kajaria, Johnson,NITCO, SOMANY, VARMORA,Orient Bell, RAK )
87.76
-
-
(F)WOOD AND PVC WORKS:
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Sal wood
0.77
-
-
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
9
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
26.71
-
-
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
24.19
-
-
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
35
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Taking 28 Kg/Sqm
-
-
-
Fixed to openings /wooden frames with rawl plugs screws etc.
1061.57
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
125x64x1.90 mm
220
-
-
100X58X1.90 mm
36
-
-
Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.
6
-
-
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm
14
-
-
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
14
-
-
Providing and fixing bright finished brass handles with screws etc. complete:125 mm
52
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
26
-
-
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
2
-
-
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type)
14
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
44
-
-
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
13.44
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
-
-
-
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
8
-
-
(G) FLOORING:
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
6.4
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(Make-Kajaria, Johnson, NITCO, VARMORA,Somany, Orient Bell, RAK etc.)
35
-
-
Providing and laying good quality vitrified floor tiles having homogeneous structure and texture with PGVT pattern in specified sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make ( Kajaria/NITCO/Jhonson/Somany/Orient bell ), in approved colours and shades, fixing with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,
in average 3mm thickness including grouting the joints with white cement / epoxy grout and matching pigments etc., complete as per direction of EIC. Size of Tile 600x600 mm
204
-
-
Providing and laying Vitrified tiles having homogeneous structure and texture with PGVT pattern in specified sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, approved make( Kajaria/NITCO/Jhonson/Somany/Orient bell ), in approved colours and shades, in skirting, riser of steps, over ement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness including grouting the joints with white cement / epoxy grout and matching pigments etc., complete as per direction of EIC. Size of Tile 600x600 mm
26
-
-
(H) CEILING/ROOFING:
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
48
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams.
8
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
16
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler of 110 mm
14
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :2.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
-
-
-
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
64.1
-
-
(I)FINISHING:
CEMENT PLASTER (IN COARSE SAND)20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)
82.1
-
-
CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)
216.1
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
1230
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
430
-
-
French spirit polishing :One or more coats on old work
4.8
-
-
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
1086
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
400
-
-
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1086
-
-
(J) PH & SANITARY /WATER SUPPLY
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
4
-
-
Providing and fixing wash basin of approved make ( Jaquar/Hindware/Cera ) with C.I. brackets, 15 mm C.P. brass pillar taps ( Jaquar / Hindware / Cera make), 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
-
-
Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings.
4
-
-
Providing and fixing 100 mm sand cast Iron grating for gully trap.
6
-
-
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.
6
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
12
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
12
-
-
Providing and fixing toilet paper holder. C.P. brass
4
-
-
Providing and fixing white vitreous china pedestal type water closet (European type)(Make-Parryware, Hindware,Cera, Jaquar) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia
4
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall.20 mm nominal dia Pipes
54
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
External work 32 mm dia pipe
44
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore.
2
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore
2
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore
2
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length ,20 mm nominal bore
4
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore
6
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore
6
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
6
-
-
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.
4
-
-
Providing and fixing toilet paper holder C.P. brass
4
-
-
Providing and fixing 4 layer PVC water storage tank of with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and the base support for tank
2
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :20 mm nominal bore
2
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length.15 mm nominal bore
8
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet.150 mm diameter
4
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore
2
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893.115mm nominal bore
4
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
38
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°. 110 mm bend
14
-
-
(K) WATERPFOOFING :
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 5 mm depth and 5 mm width-.
167
-
-
Providing and applying heavy duty fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 of approved make and material ( Dr Fixit/Sika/STP ) on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 1000 microns) of make Dr Fixit/Sika/STP. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. Note: The work shall be carried out by the authorized applicator of the respective agency.
240
-
-
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. The material shall be reputed waterproofing brand: Dr Fixit/Sika/STP. The work shall be carried out by the authorized applicator of the respective agency.
54.36
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50mm average thickness
35.1
-
-
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
43.88
-
-
Providing, mixing and applying bonding coat of approved adhesive ( Dr. Fixit/ STP/Sika ) on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect
-
-
-
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
19.59
-
-
Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
56
-
-
Providing, mixing and applying SBR polymer (of approved make: Dr Fixit/ Sika/STP) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness. Note: The work shall be carried out by authorised applicator only.
30
-
-
Providing and injecting approved grout in proportion recommended by the manufacturer ( Dr Fixit/ Sika /STP ) into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.)Stirrer mixed SBR Polymer (of approved make:Dr Fixit/ Sika /STP modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Note: The work shall be carried out by authorised applicator only.
35
-
-
(L) MOSAIC POLISHING:
Mirror polishing on marble work/Granite work/stone work / mosaic work where ever required to give high gloss finish complete.
24.2
-
-
Providing and fixing ball bearing for rolling shutters.
4
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
760
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
128
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
38
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5mm depth and 5 mm width
167
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
-
-
-
Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
4
-
-
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
11
-
-
Repair and maintenance of rolling shutter with necessary tools and plants and make it good for useable condition all complete as per direction of EIC
2
-
-
(II)ELECTRICAL WORKS
Concealed wiring in PVC conduit: Supply Installation, testing & commissioning of 1100V FRLS grade PVC insulated multi stranded copper conductor wires, for light point/ fan point/ exhaust fan point/ call bell point, in surface / recessed medium class PVC conduit(25mm to 40mm)/ Flexible Nylon conduit, with, suitable size GI junction box and earthing the point with FR PVC insulated copper conductor single core cable etc as required, as per IB/IS specification, on ceiling/ concrete or brick wall at a minimum depth of 3inch from the surface, complete with all accessories, bends, Tees, suitable pull boxes/ junction boxes of suitable size as per the site condition wherever required & with necessary leads at both ends by approved copper lug, complete as per the instructions of Engineer-in charge.
Note: 1. Connection shall be done with crimped type tinned copper lugs and washers.
2. Cutting of concrete/ Brick wall, ceiling etc are to be done properly using suitable cutting machine without damaging periphery area for laying of conduits & fixing of switch boards, DBs, JBs etc. 3. After laying of conduits, and fixing of switch boxes, JBs etc the cutting area has to repaired good to finish as like as prior to cutting of the same.
4. All PVC insulated copper conductor FRLS grade shall be ISI marked.
5. Make of wires: Finolex/ L&T or approved equivalent of the same.
-
-
-
01 nos. of 06 Sqmm wires in suitable PVC conduit
400
-
-
01 nos. of 04 Sqmm wires in suitable PVC conduit
1000
-
-
01 nos. of 2.5 Sqmm wires in suitable PVC conduit
700
-
-
01 nos. of 1.5 Sqmm wires in suitable PVC conduit
1000
-
-
01 nos. of 01 Sqmm wires in suitable PVC conduit
1000
-
-
OUTLET SWITCH & SOCKET BOXES: Fabrication, supply, installation, Testing and commissioning duly concealed in concrete/brick wall/Ceiling of outlet switch boards made out of 16 SWG thick galvanized MS sheet with top cover 3mm thick Bakelite Hylam (Preferably of National make, white color) laminated sheet duly fixed by SS screws. Necessary wiring inside the board has to be carried out using suitable copper PVC insulated single core flexible wire. One suitable nut and bolt has to be provided on the side wall of the board for earth connection. All complete as per the instructions of EIC-IOP.
Note: 1. All Switches, Sockets, ceiling rose & Angle holder should be of Anchor (Model-Penta) make or approved equivalent of the same. 2. All fan regulators are to be electronic stepped type (5A socket type) and make of the same is to be Anchor or approved equivalent of the same. The 32A DP Switch is to be of Anchor/ Cona make or approved equivalent of the same.
3. All wires to be used should be of Finolex/ L&T make or approved equivalent of the same.
4. All terminals of the wires to be connected inside the board should be provided with suitable copper lugs/ sockets.
5. Sample of all materials is to be got approved from EIC, IOP before execution.
6. Nomenclature as required for each board is to be mentioned on the same.
-
-
-
The switch box will contain 01 no. of 15Amp, 250Volt Socket
8
-
-
The switch box will contain 01 no. of 15Amp, 250Volt Switch
8
-
-
The switch box will contain 03 no. of 5Amp, 250Volt Switch 03 no. of 5Amp, 250Volt Socket
2
-
-
The switch box will contain
01 no. of 15Amp, 250Volt Switch
01 no. of 15Amp, 250Volt Socket
4
-
-
The switch box will contain 04nos. of 5 Amp, 250Volt Switches 01 no. of electronic, step type, socket size fan regulator
01 no. of 5Amp, 250Volt Socket
8
-
-
The switch box will contain 01nos. of 5 Amp, 250Volt Ceiling Rose
26
-
-
The switch box will contain 01nos. of 5 Amp, 250Volt Angle Holder
42
-
-
The switch box will contain 01nos. of 5 Amp, 250Volt Switch
8
-
-
The switch box will contain 01nos. of 5 Amp, 250Volt Batten Holder
6
-
-
The switch box will contain 01no.s of 250Volt Call bell, Ding Dong type, preferably of Cona make or approved equivalent of the same.
2
-
-
The switch box will contain
02 no. of 5Amp, 250Volt Switch
02 no. of 5Amp, 250Volt Socket
8
-
-
The switch box will contain 05nos. of 5 Amp, 250Volt Switches 01 no. of electronic, step type, socket size fan regulator
01 no. of 5Amp, 250Volt Socket
2
-
-
The switch box will contain
01 no. of 5Amp, 250Volt Switch
01 no. of 5Amp. 250Volt two way switch
2
-
-
The switch box will contain
01 no. of 15Amp, 250Volt Socket
01 no. of 15Amp, 250Volt Plug Top
4
-
-
The switch box will contain 03 nos. of 5 Amp, 250Volt Switches, 01 no. of 5Amp, 250Volt Socket
6
-
-
The switch box will contain 03no.s of 5 Amp, 250Volt Switches 02 no. of 5Amp, 250Volt Socket
2
-
-
The switch box will contain
02 no. of 15Amp, 250Volt Switch
02 no. of 15Amp, 250Volt, 06 pin Socket
2
-
-
The switch box will contain 05nos. of 5 Amp, 250Volt Switch
2
-
-
The switch box will contain 01 no. of 5Amp, 250Volt Socket
4
-
-
The switch box will contain
03 nos. of 5Amp, 250Volt Switch
01 no. of 5Amp. 250Volt two way switch
2
-
-
The switch box will contain
03 no. of 5Amp, 250Volt Switch
4
-
-
The switch box will contain
01 no. of 5Amp, 250Volt Switch
01 no. of 5Amp, 250Volt Socket
2
-
-
The switch box will contain
01 no. of 5Amp, 250Volt Switch
01 no. of 5Amp, 250Volt Call Bell Switch
2
-
-
MCB BOX: Fabrication, supply, installation, Testing and fixing on concrete/brick wall/ plywood partition of local control MCB box made out of 16 SWG thick galvanized MS sheet with top cover also galvanized MS sheet duly fixed by SS screws. Necessary cut outs to be provided on the top cover for the operating lever of the MCB and suitable size gland holes at two ends has to be made for the MS conduits/ Armored cables or The readymade factory made MCB boxes of make Legrand or approved equivalent. MCB shall be minimum of 10 KA breaking capacity. All complete as per the instructions of Engineer-in-charge- IOP
Make: MCB of Legrand or approved equivalent of same.
All input & output connection has to be provided with suitable sockets.
-
-
-
The MCB box with one no. 25A DP MCB
12
-
-
The MCB box with one no. 10A DP MCB
2
-
-
08 Way, double door, Legrand make MCB Enclosure with one set of 63A TPN MCB of Legrand Make for Incoming protection.
2
-
-
Junction Box: Fabrication, supply, installation, Testing and commissioning of duly concealed in concrete/brick wall/Ceiling of outlet JB (5” x 5”x 3”Box size) made out of 18 SWG thick galvanized MS sheet with top cover 3mm thick Bakelite Hylam (Preferably of National make, white color) laminated sheet duly fixed by SS screws.. One suitable nut and bolt has to be provided on the side wall of the board for earth connection. All complete as per the instructions of EIC-IOP.
14
-
-
Gate light Junction Box: Fabrication, supply, installation, Testing and commissioning of duly concealed in concrete/brick wall, of water proof junction box (8”x 6”x4”) made out of 16 SWG thick galvanized MS sheet. Top cover also should be of same GI sheet duly fixed with SS Screws. One suitable nut and bolt has to be provided on the side wall of the JB for earth connection. One 04 way bolted terminal block of 32A current rating is to be provided in the box. Three nos. of suitable gland holes are to be provided for input and output conduits. All complete as per the instructions of EIC-IOP.
4
-
-
Main Supply Junction Box: Fabrication, supply, installation, Testing and commissioning of duly concealed in concrete/brick wall, of water proof junction box (12”x 10”x5”) Box made out of 16 SWG thick galvanized MS sheet. Top cover should be of Hylam sheet duly fixed with SS Screws. One suitable nut and bolt has to be provided on the side wall of the JB for earth connection. One 04 way bolted terminal block of 125A current rating is to be provided in the box. Three nos. of suitable gland holes are to be provided for input and output conduits. All complete as per the instructions of EIC-IOP.
4
-
-
Junction Box 10”x 12”x 04” made out of 18 SWG GI sheet and top cover made out of white Hylam sheet duly fixed by SS screws. The JB is to be used diversion point of wiring for FF-DB and wiring to call bell & gate light to accommodate the conduits with wires.
2
-
-
Gate Light:
Supply, Installation, testing and commissioning of the 1x15W LED, gate light fittings/Post top Lantern fitting with all accessories, complete on the existing pillars of the main gate.
Preferably of HAVEL – CORALMINIPT-15W-LED-830-PSYMTOPC -9405, 240V, 50Hz or approved equivalent of the same.
6
-
-
LIGHT FIXURES:
Supply, installation, testing commissioning of LED light fixtures and fittings complete with all accessories, LED tube / lamp etc. on surface of slab/ beam/ false ceiling by 2 numbers (minimum) of 6mm Anchor fasteners or on wall by means of 25 x 3mm GI strip bend to shape and with 2 nos. of wood screws, nylon plug etc. suitable supporting frame fixed with rag bolts grouted on the wall/ anchor fastener on the beam/ column & other fixing accessories etc., provision & connection with 01 sq.mm multi-stranded copper conductor PVC insulated FRLS grade wires/ 1.5sq.mm copper conductor PVC insulated FRLS grade earth wire etc. with the fixture from the existing point, all as per drawing, specifications & as per the instruction of EIC.
Note: Sample fixture/ fitting shall be got approved from department with complete technical data.
-
-
-
LED Tube light Fitting/Batten suitable for single T8 LED Tube /1x18W LED Tube light with 01 nos. 18W, 250V, 50Hz, 04ft length, Cool White, LED Tube light. The LED Tube should be replaceable/ suitable for retrofit in old conventional fittings CG model no.ECO-DIJB12LT8-20 (For fitting/Batten) & Ultron-LT8-8-565-2 (For LED T8-Tube) or approved equivalent of the same.
10
-
-
Ceiling Light :1ftx1ft, Square, Surface mounted, LED panel, white light, 18W, 250V, 50Hz to be mounted on the inner concrete surface of the roof. Preferably of CG make Model – LCDSPLN-S-18/ LCTLRN-18-CDL or approved equivalent of the same.
2
-
-
CEILING FANS:
Supply, Installation, testing & commissioning of 1200 mm sweep ceiling fans, double ball bearing, capacitor with aluminium canister complete with down rod/ motor, safety chain/ wire and all accessories, suitable for 230V/ 250V, 50Hz supply system, white color including continuous earthing and final connection with 01sq.mm multi-stranded copper conductor PVC insulated FRLS grade wires. Make: Crompton Greaves, Model-High Speed Plus, BEE Star rated or approved equivalent of the same
10
-
-
EXHAUST FAN:
Supply, Installation, testing & commissioning of following size of exhaust fans, single phase complete with blades, motor, Light weight, rustproof body & blades, louvers, scope includes supply of 3Core, copper 1.5 Sqmm, flexible chord of suitable length with 6A, 3 pin plug top, louvers, rag bolt/anchor fastener with necessary fixing arrangement painting as per specification drawing & as per the instructions of EIC-IOP. Make: Crompton Greaves model- Brisk Air white or approved equivalent of the same
-
-
-
150 mm dia, 1300rpm, 25W, 250V, 50Hz, Air Delivery-275CMH
6
-
-
GEYSER:
Supply, Installation, Testing & Commissioning of mini instantaneous electric water heater relevant ISI marked 3KW, 3 liter capacity, superior grade stainless steel tank, Moulded PUF insulation for less energy consumption, Sleek & ABS body, Copper heating element, with safety devices like pressure relief Valve, Snap action automatic thermostat, thermal cut out, fusible plug and non-return device and reset knob, working on 230/ 250V single phase supply including MS supports fabricated out of 25 x 5 mm thick MS flat with 2 coat of red oxide and 2 coats of enamel paint fixed on wall with 3 no.s of no.10 nettle fold wood screw in wall with nylon/ Phil plug and all mounting accessories including connection with suitable lugs. The scope of work includes supply with 3 core x 4 Sqmm copper wire between geyser & connector box, 15A, 03pin, plug top and suitable C.P. brass pipe with nut bolts, coupling to the inlet and outlet of water heater and pipe line and all as per specifications, standards, drawings & instructions of EIC.
Make: Crompton Greaves, model – Solarium-Neo, V-Guard make, Model STRIN HOT or approved equivalent of the same, Classic-03ltr or approved equivalent of the same.
4
-
-
DISTRIBUTION BOARDS: Supply, Installation, testing & commissioning of following medium voltage (415V) TP&N distribution boards single door complete with necessary SFU, MCCB, MCBs, etc. suitable for wall mounting with M.S. frame work of 40x40x5mm angle mounting with M.S. enclosure fabricated out of 16SWG thick M.S. CRCA sheet with concealed hinged door, cam type locking arrangement etc. Suitable tinned copper bus bars have to be provided for all phases, neutral and earth connections both for incoming and outgoing connections. Cable end box, wire way box, including interconnections with appropriate size of PVC insulated copper conductor, phase barriers, earth of DB, enameled danger board, name plate, neoprene gasket for joints & door has to be provided. Necessary metal treatment, two coats of red oxide paint & two coats of enameled paint has to be provided. The front door (MS sheet) should have necessary cutouts for knobs/ operating levers of MCB’s. Phase distribution drawing etc. all as per drawings specifications etc. relevant IS & instruction of Engineer-in-charge-IOP (G.A. & fabrication drawing to be got approved before fabrication)
Note: 1. MCB’s shall be minimum 10KA breaking capacity & Preferably of Legrand make or approved equivalent of the same.
3. All tinned copper bus bars should be minimum of 200A rating or as mentioned in the drawing.
4. All wires to be used for wiring are should be FRLS, Finolex make or approved equivalent of the same.
5. Bolted type terminal blocks of suitable rating are to be provided for all types of input and output connections.
6. All input & output connection has to be provided with suitable cable sockets (Aluminium for Aluminium cable and Copper for copper cable)
7. If factory made DB is available of legrand or approved equivalent make suitable for this requirement same can be supplied and installed.
-
-
-
GF DB (Preferably Legrand Make model no.507772, 08way (08+24) TPN DB or approved equivalent of the same) with the following:
1. 63A TPN ELCB for Incomer – 01 no.
2. 40A TPN MCB for In-comer -01no.
3. 20A SP MCB for outgoing – 08nos.
4. 10 A SP MCB for outgoing – 10 nos.
2
-
-
FF DB (Preferably Legrand Make model no.607715, 04way TPN DB or approved equivalent of the same) with the following:
1. 63A TPN ELCB for Incomer – 01 no.
2. 40A TPN MCB for In-comer -01no.
3. 20A SP MCB for outgoing – 03nos.
4. 10 A SP MCB for outgoing – 06 nos.
2
-
-
Meter Box: Outdoor installation type meter box, with canopy, wall mounting type, double door, locking arrangement, Completely sealed with rubber gasket for rain water, suitable for installation of one three phase energy meter. The box will contain one no. of three phase energy meter, preferably of L&T make, EM301, 3Ph, 4wire, current 10Amp to 40Amps and one TPN MCB of 63Amp at outgoing. The box should have enough space for connection of 02 nos. of 16Sqmm, 4 core, PVCA cable. Bolted type, 04way, terminal block of 125A rating is to be provided in the box. Two nos. of gland holes are to be provided in the box at lower end for connection of PVCA cable/ PVC conduit.
2
-
-
EARTHING CONNECTION:
Supply, laying/fixing, testing & commissioning of tinned copper earth wire fixed to wall side of trench/slab/column/beam/shaft with thick GI spacers and GI saddles or in ground at 750mm below including excavation in ground with protective baked bricks, excavation in ground refilling and back filling of trench, interconnection of earth wire /strip with GI nut bolts and washers and solder jointing, painting with two coats of black bituminous compound for earth wire/strip in ground and green enamel paint for earth wire/strip on surface as per the specifications and as per the instruction of Engineer-in-charge. Jointing of the earth wire shall be solder joints with tinned copper cable sockets
-
-
-
Two numbers of 08 SWG tinned copper wire
40
-
-
EARTH STATION:
Supply, installation, testing & commissioning of tinned copper plate electrode earth station, 2.5 mtr. below ground level conforming to latest IS specifications complete with all required materials like coke/charcoal, salt, brass, nut bolts & washers, watering arrangements (GI funnel), G.I. pipe-25mm (B class), masonry chamber, heavy duty cast iron cover plates and excavation in all types of soil in ground, refilling and removal of excess earth within a radius of 500mtr etc. as per instruction of EIC, drawing & specification.
Note:
1. Measurement of resistance of earth station and resistance of complete scheme of earthing shall be measured, recorded & got approved by EIC.
2. The copper plate should be of electrolytic grade.
3. Two nos. of 25 x 6 mm tinned copper flat is to be bolted to the earth plate and to be brought up to the top of pit.
-
-
-
600 x 600 x 3.15 mm tinned copper plate electrode earth station
2
-
-
Water Tight/ Bulk head light fitting:
Supply, installation, testing and commissioning of water tight metal fixture with 09W CFL/LED lamp suitable for fixing on wall outside of the house. Make: Philips/ Bajaj/ Wipro or approved equivalent of the same.
10
-
-
Dismantling of existing old wiring:
The scope of job involves the following:
1. Disconnection of all connected wires/ cables in the IE-I quarter.
2. All the fans & light fittings has to disconnected/ removed and to be handed over to EIC, IOP.
3. Removal of the wires from the conduit and to hand over the same to EIC, IOP.
4. Removal of the existing switch boards/ DBs from the wall and to hand over the same to IOP, EIC.
5. All the materials after removal has to be handed over EIC, IOP within a lead of 500 meters as per his instruction.
If required hand held machine may be used for cutting of the wall for removal of the boards from the wall. After removal of the boards/ DBs the same cutting area is to be properly filled with sand, cement, brick, chips, for good to finishing of the same area.
Note: The quantities mentioned in the above items are of approximate value and payment will be made as per actual measurements after completion of the work.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements