Institute Of Minerals And Materials Technology Tender

Half brick masonry with non modular fly ash bricks of class designation 7.5, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour Z black/ Lakha red Area of slab over 0.50 sqm

Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters and similar locations of required size of approved shade, colour and texture including rubbing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture Z black/ Lakha red .Area of slab over 0.5 sqm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Distempering with oil bound washable distemper of make 'Asian UNO' to give an even shade : New work (two or more coats) over and including water thinnable priming coat with primer of make 'Asian Smart Care'. Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Applying one coat of water thinnable primer of make 'Asian Smart Care'. on wall surface : Water thinnable primer. Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Wall painting with acrylic emulsion paint of make 'Asian Apcolite Premium' to give an even shade :Two or more coats on new work. Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with 1st quality acrylic distember (Ready mix) of make 'Asian UNO' to give an even shade Old work (one or more coats). Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Wall painting with plastic emulsion paint of make 'Asian Apcolite Premium' to give an even shade:One or more coats on old work. Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Painting with synthetic enamel paint of make 'Asian Apcolite' of required colour to give an even shade :One or more coats on old work. Agency shall bring container at a time and make signature of Head, .ESD before start of the work and keep the signed container till the final bill is passed)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead Thickness above 10 mm up to 25 mm

Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks

Providing and fixing aluminium workof 'Hindalco' make for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

P/F roller blind (Black out) of VISTA make model SERENE (OPAQUE) without head rail of approved colour as per the direction of the EIC.

Providing and fixing 8 mm thick plain multipurpose cement board fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Dismantling and refixing old existing false celling tile with frame, rafter levelling the frame and necessary screws as required for the same including scaffolding for all heights complete item as directed by the EIC.

Repairing of iron profile roof sheeting with fixing of water proofong silicon (Silirub 989) of make McCoy to srews and fixing of new self tapping screws as required at site as directed by the EIC.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on existing old inter locking metal grid of hot dipped galvanised steel sections as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/ mK.

Providing and fixing hard plastic roller of TPI make or equivalent for sliding Aluminium window/cup-board shutter including all fittings of approved quality as directed by the EIC.

P/F 75mm aluminum star locking handle of TPI make or equivalent for aluminum sliding window and cup-board shutter of approved quality as directed by the EIC.

Repairing and refixing of existing wooden Cup board shutter of size ( 3.20X 0.80) mtr including all fittings , adhessive,water proof ply and laminate sheet as required at site as per the direction of EIC.