Indian Oil Corporation Limited Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 18,90,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Mainline Laying And Combined Station Works (csw) For Pipeline Project From Prrpl T-point (ch. 184.6 Km)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_176051_1Bid Award Id
ViewTender No
PLCC/PRRPL- Meramandali/CL/24011Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
26524
14568741
-
... More
Scrapper Launching/ Receiving Barrel along with all accessories, JIB Crane, PIG handling tray, etc as applicable. Taking delivery of equipments, shifting/transporting within station premises, placing on pre-constructed foundations, assembling together all sub-asse mblies, levelling, alignment, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instructio n, specifications and instructions of Site Engineer / EIC., Note: Weight of equipment is indicative only, Payment shall be done base d on actual weight of equipment
10
467527
-
... More
Rocky strata including boulders :
-
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
ALUMINIUM WORK :
-
-
-
... More
Supply of wall mounted Fibre Termination Box (FMS) as per tender specifications
6
100762
-
... More
150 mm diameter
1
373
-
... More
GI CABLE TRAY: Supply, installation & fixing of prefabricated perforated GI cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, con sumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
9200
2053303
-
... More
CHEQUERED PLATE
-
-
-
... More
Taking delivery and transportation of bare pipes from owner's stockpile, transportation, unloading the pipes at manufacturer's work s and fabrication of Long Radius (R=6D) Hot pulled induction bends having tangent length of approximately 1000m at both ends as per specification and delivery of hot pulled bends to site including visual examination, manual U.T. on the entire weld seam, bevelling of ends as per API 5L, supply of all materials, consumables, labour etc. as per specifications and direction of Site Engineer / Engi neer-in-Charge.
-
-
-
... More
415 V AC 3 phase / 230 V AC single phase motors - Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (includi ng space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power ca bles, earthing of the motor/actuator/ connecting the thermistor, installing the controller in LT panel, earthing the motor frame, ar mour etc. as per the drawings, erection manuals, and as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the required FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips , labour, tools, materials, etc., as required in all respects for all types of motors/heaters/thermistors/actuators etc.: Capacity a bove 7.5 KW but upto 50 KW
4
70396
-
... More
Mobilisation/ demobilisation of pigging tools, tackles, consumables, accessories and personnel by contractor at work site including magnetic pig, electronic geometry pig, pig tracking device, preparation and cleaning of the complete mainline / Mainline sections in cluding HDD sections under this tender (but excluding HDD crossings not included under the scope of this tender and to be executed b y separate agency) by running series of pigs for cleaning the line from debris, water & making it dry for launching calliper pigs, r unning of magnetic pig for cleaning of ferrous residue, launching and receiving the electronic & standard calliper pigs, including p ig tracking at 5 to 10 km interval, data retrieval, interpretation of data and submission of reports in the form acceptable to the O wner, including rectification of defects observed from calliper survey, including supply of all labour, materials, equipment & instr uments, calliper pigs, fabrication of launching & receiving barrels, all complete for ascertaining the geometry of the pipeline.
-
-
-
... More
3.500" ODx 0.216" WT (Sch.STD) ASTM A 106 Gr B Bare Pipe
600
1466976
-
... More
3"x2" x Concentric Reducer X 150#
6
2605
-
... More
Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick fo undation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thic k) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to dr ains inclusive of all labour, material, equipment, etc., all complete as per drawing, specifications and directions of the Engineer -in-Charge :
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concr ete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mi x, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, inc luding admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 3 30 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.] :
-
-
-
... More
Using Grade 'A' sealing compound. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH"].
575
2524
-
... More
SANITARY INSTALLATIONS :
-
-
-
... More
32 mm nominal dia pipes
34
18710
-
... More
Fire Proximity suit
2
12618
-
... More
Above ground internal epoxy coated pipe for Fire Water Services: (with internal epoxy coating at welding joints, fittings and flange s), Taking delivery of internal epoxy coated pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from d esignated location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments suc h as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equ ipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pip es by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie -in, final cleaning-up and disposal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract).The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 at all location where coating has been distroyed due to welding and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake f illed /Liquid epoxy / Equivalent with coating of thickness 700-1000 Microns. Internal coating shall be done at the inner surface of pipe ends, Flanges, pipe fittings, valves, etc so that the internal surface of piping is not directly exposed to water, and completi ng the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC.Thickness and Gr ade mentioned in the item are for reference only and may vary. Payment shall be based on OD.
-
-
-
... More
1" 600# 90 deg LR Bend
11
4088
-
... More
Strecher WITH BLANKET
3
19066
-
... More
CS Bushing 1" Butt Welded x 1/2" FNPT as per tender specifications
70
7484
-
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
39
300358
-
... More
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm s ize (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive o f cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
136
49931
-
... More
1" WNRF 150#, ASME B16.5
176
60642
-
... More
8.625"
22
314375
-
... More
Silent LT DG set - Erection, Installation including transportation from owner desginated location, connecting, testing and commissio ning of owner supplied Emergency LT DG set including execution of terminal connection of power/control cable. The work shall include grounding of alternator neutral, earthing, providing water pipe connection for Radiator water make-up complete with valve, solenoid valve etc. piping for fuel line, fabrication, welding, erection and painting of owner supplied support structure (including supply of shortfall support structure, if any) for exhaust piping, mounting on channels/AVM pads, installation of PLC based AMF panel, NIG panel, exhaust piping including insulation and cladding, fuel piping etc., materials, labour, tools and tackles, consumables etc , a s per drawings, specification and directions of Site Engineer / Engineer-in-Charge: LT DG set with PLC based AMF panel, fuel tank etc
1
55331
-
... More
Lighting Distribution Board / AC Distribution Board - Supply , installation, testing and commissioning of TPN lighting / AC Distribu tion board of approved make, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conf orm to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings: Type V Distribution Board: Double Door, EURO DB of Havells or equivalent approved make having 200 A TPN Bus Bar, 1 x 100 A FP MCB, 1x100 A FP RCCB (100 mA Sensitivit y), 9x32 A SPN Motor duty MCB as per specification.
2
167968
-
... More
Installation of Permanent half cells including connecting the cable in the TLP etc. with cable lugs, sealing material, laying of cab le, testing & commissioning of cell etc. all complete with required material, excavation, backfilling etc. as per specifications, r ecommendation of cell supplier and directions of Site Engineer / Engineer-in-Charge.Permanent half cell
9
85023
-
... More
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, t ackles etc. as per specifications and directions of the Engineer-in-Charge :
-
-
-
... More
SS Union Tee 3 x 1/2" OD tube as per tender specifications
20
9652
-
... More
INSTALLATION OF PT / PS: Installation, assistance in testing and commissioning of Pressure Transmitter (PT) / Pressure Switch (PS) o f various ratings as per the directions of Engineer in-charge/ Site engineer and drawings.
5
58551
-
... More
CLADDING WORK :
-
-
-
... More
On W.B.M/ W.M.M. @ 0.4 Kg/sqm
650
14396
-
... More
6" x 150#/600# Insulating Coupling Erection
2
17235
-
... More
Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document:
-
-
-
... More
DIRECTION MARKER
70
617848
-
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :
-
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
Above-ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both fro m outside & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping includi ng cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment no zzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by wat er after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, fina l cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumable s necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD.
-
-
-
... More
HDD INSTALLATION (without OFC) #Design, detailed engineering & installation of pipeline across rivers, NH, SH, Expressways, Railways, etc by HDD method. #Complete work for the crossing (between the limits, as indicated in the approved drawings) including mobilization & de-mobilization at site(s), supply of all materials as per the `Scope of Supply' and all consumables, equipment, manpower & other resources and arranging the required land for site preparations and execution of, but not limited to, the following works in accordance with the specifications, drawings and as per all provisions of the contract document and instructions of the Owner. #Interpretation of data of hydrological / geo-technical surveys furnished by the Owner, carrying out fresh topographic survey of the rivers, NH, SH, Expressways, Railways, etc & developing new profile drawing for the crossing location, carrying out additional surveys required for collecting data relevant to design and construction of the crossing, performing all engineering & design calculations, preparation of all necessary construction drawings for approval of the Owner as per the provisions of contract document, preparation of detailed construction method statement and design analysis. #Taking delivery and transportation of Owner-supplied 3LPE coated pipes to the work site from designated stockpile location, inspection of the coated pipes visually and/or with holiday detector for defects, including arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position. #Complete site preparation including arranging of required land, setting up of fabrication yard, preparation of temporary arrangement for pipeline stringing, launching etc. #Carrying out repair of pipe defects, replacement in the case of non-repairable defects and repairing damages to pipe coating including defects/ damages occurring during transportation and handling. #Pre-construction surveys and collection of all necessary data. #String preparation including repair of pipe and pipe coating defects, welding, non-destructive testing of welds including 100% radiography (by X-ray), supply of films & all equipment and providing all facilities to Owner's representative(s) for examining radiographs, repair of defects in the welds and re-testing etc. #Coating of the field joints of the pipe string to be installed by HDD method with DIRAX heat shrink sleeves of M/s Raychem's make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make used for HDD crossings. #Repair of all coating damages in the pipe section to be laid by HDD method by full encirclement sleeves using suitable cut sections of approved quality of heat shrink sleeves of M/s Raychem make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make. #Carrying out air cleaning, gauge pigging and pre-installation hydrostatic testing of the complete pipeline string, as per the specifications, including repair of defects and retesting etc. #Installation of the pipeline below the rivers, NH, SH, Expressways, Railways, etc by single horizontal directional drilling operation to the correct profile as per the approved drawings. #Carrying out post-installation hydrostatic testing of HDD pipe string (along with transition pipe section). #Carrying out post-installation coating survey as per approved procedure. #Restoration, clean-up and disposal of drilling fluid, waste and all other surplus materials etc. #Transportation of surplus Owner-supplied pipes to the designated stockpile location of the Owner. #Preparation of as-built drawings and other records etc. #All other works not specifically listed herein, but required as per specifications, drawings, provisions of the contract document, calculations and construction method statement, leading to successful completion of the works.
-
-
-
... More
6" x 150# 90° LR Bends
34
67722
-
... More
DENSITY METER/VISCOSITY METER INSTALLATION - Taking delivery, shifting to installation site within the station premises, erection, i nstallation of Density transducer (DE/DM) complete with by pass scoop, pitot tube, weld neck flanges. Providing assistance to contro l system vendor/density meter supplier in testing and commissioning of density meter. Installation and erection shall be as per manu facturer's instructions, drawings and engineer in-charge/site engineer's instructions. Job shall include termination of cables both at control panel end and density transducer end, welding of weldolet, supply of suitable size non-flame proof cable glands, steel st ructures or fixtures, leveling, grouting, assembling and fixing all accessories, labelling, tagging using SS plates, glanding, ferru ling etc complete in all respect.
2
40084
-
... More
8.625"
22
398486
-
... More
Electrical CP Composite
-
-
-
... More
Two or more coats on new work
101
16330
-
... More
Supply and installation of Safety Shower & Eye-Wash as per drawing/ instruction of EIC
4
64026
-
... More
350 mm diameter
18
15900
-
... More
1" x 800# W/W, A/G, HOV, API 602 GATE VALVE
197
1868048
-
... More
CS corrosion coupon Supply and Installation of CS corrosion coupon with 1 sq. cm bare metal with 2 numbers 4 sq. mm lead of minimu m 10 m long lead in a sdistance of 0.5 m from the pipeline inclusive of cable & terminating the cable in the TLP terminal. The corro sion couponf are to be installed with specified test lead points for which prior apporval to be obtained from owner. The item also incluseds supply, installation, laying & termination of all CU cables of required length (as per site condition) and size as mention ed in the standard drawing, toggle switch, cable glands and lugs etc. , complete in all respect as per the direction and specificati on detailed in the documetn complete with all tools , takles & other necessary requirement for preparation of the coupon . The work complete in all respect shall include supply of all the labours, tols etc. compete as per the direction of site engineer/engineer in charge.
59
415750
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) for location in zone-I gas group II A & IIB (Temp. class T3) area with a separate terminal box for incoming cable and a separate terminal box for out going cable (where applicable), apart from separate enclosure for each equipment including control gear etc. in IP 65 cast aluminium LM-6 certified en closure: FLAMEPROOF LED WELL GLASS FITTING 125 W, Supply, installation, testing & commissioning of Ex'd' (Flameproof) Well Glass Lig ht Fixture with provision of Cable Entries: 2 Nos. x 3/4" ET, Cable Glands: 2 Nos. x 3/4" ET (Max. OD 20mm) - Ex'd'(IIA/IIB), Doubl e Compression type, Brass Nickel Plated with PVC Hood. Blanking Plug: 1 No. x 3/4" ET - Ex'd', Brass Nickel Plated. Gasket: Neoprene , Hardware: SS 304, Earthing: External 2 Nos. (M6), Internal 1 No. (M5), and as per attached detailed technical specification.
38
1296799
-
... More
18" OD x 0.375"/ 0.438"/ 0.500" WT APL 5L Pipe
50
525572
-
... More
Supply of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications
15
43789
-
... More
Mainline Laying
-
-
-
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
218
62216
-
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water suppl y including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, t renching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed b y the Engineer-in-Charge :
-
-
-
... More
3"x ANSI 600# W/W API 6D SWING CHECK VALVE
2
85457
-
... More
Surface preparation of piping, equipment and valves etc. by abrasive blast cleaning or with power wire brush (wherever blast cleanin g is not possible) confirming to SA 2.5, making the surface free of dust, grease, mill scales etc., application of 1 coat x 50-75 mi crons DFT of Inorganic Zinc Ethyl Slicate Primer, followed by application of sealer coat of 30 micron DFT and intermediate coat of 150 micron DFT with surface tolerant epoxy mastic paint and 2 coats x 50 micron each DFT of Isocynate Aliphatic Poly Urethene (PU) b y airless spray, with approved materials, paints, tools, tackles, consulambles, non-consumables, labour, equipment etc. to complete the job in all respects as per specification and instructions of the Site Engineer / EIC. The total DFT shall be minimum 330 microns .
2600
4390308
-
... More
Fire Bucket
10
4920
-
... More
Supply of Sump tank at respective locations as per technical specifications of the tender:
-
-
-
... More
6", 150#, F/F, GLOBE VALVE/CONTROL VALVE/MOTORIZED GLOBE VALVE/ROV/PLUG VALVE
2
19783
-
... More
"... in continuation to the previous line Installation of the pipeline and OFC conduit as a bundle crossing below the Road/ other utility horizontally by shallow HDD operatio n to the correct profile as per the approved drawings in a pre-reamed hole of appropriate. Carrying out post-installation coating survey as per approved procedure. Restoration, clean-up and disposal of drilling fluid, waste and all other surplus materials etc. All other works not specifically listed herein, but required as per specifications, drawings, provisions of the contract document, c alculations and construction method statement, leading to successful completion of the works. Note :- The item to be operated under the specific instruction of Engineer in Charge"
-
-
-
... More
Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate.
22
12201
-
... More
80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
8
31330
-
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
390
3003582
-
... More
"Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cist ern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : "
-
-
-
... More
STEEL WORK :
-
-
-
... More
450 mm Finished Floor Height (FFH)
1
7135
-
... More
2.0 kg CO2 Extinguisher
8
56281
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
All types of soil :
-
-
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 200 Kg / Cm2 as per the technical specifications attached in the Tender.
5
36293
-
... More
Electrical CSW Supply
-
-
-
... More
Rescuscitor
2
12618
-
... More
3/4" to 1/2" Reducers
15
3840
-
... More
WARNING SIGN
80
837328
-
... More
5/4" Plugs
15
1356
-
... More
75 kg DCP Extinguisher
2
59266
-
... More
Conducting Close Interval Potential Logging Survey at an interval of 1 m over the buried line in the right of way including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications, and approved procedures identification of areas/locati ons where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the su rvey results in the graphical as well as tabular forms computerised colour print and complete in all respects and directions of Site Engineer / Engineer-in-Charge.Close Interval ON/OFF Potential logging survey
22
105302
-
... More
600 mm dia R.C.C. pipes
98
389073
-
... More
150 mm nominal size diameter
90
82696
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: GI wire (8 SWG)
550
41529
-
... More
Pipe size 8 inch NB to 28 inch NB
200
124136
-
... More
80 mm nominal bore
1
2950
-
... More
WATERPROOFING :
-
-
-
... More
8 NPS (8.625" OD x 0.250"/ 0.277"/ 0.312"/ 0.322"/ 0.375"/ 0.438" WT) API 5L/ ASTM A106/ A333 Pipe
100
495364
-
... More
Supplying, providing and filling soft soil in trenches at Seismic Fault location crossing or running parallel to pipeline (including additional 500 mm deep & 200/300 mm wide trenching) around mainline pipe for providing a minimum padding thickness of 500 mm on top as well as at bottom of the mainline pipe(for the complete trench width). Padding materials shall be sand/graded soil/other suitable material containing no gravel, rock, or lumps of hard soil. The graded soil for padding shall pass through sieve size ASTM-10 or ISO-2.00. Acceptable padding shall be placed under the pipeline before its installation and around it after installation, to establish at both sides and on top of the pipe a permanent layer of padding. The thickness of compacted padding shall be at least 150mm. The trench shall be deeper by at least 150mm. The trench shall be evenly and sufficiently padded to keep the pipe, when in place, at least 150mm above the bottom of excavated trench. At seismic fault locations, in addition to the above requirements of padding material, in case the dugout soil is clayey in nature (undrained sheer strength 0.5 T/m2), the local soil shall be replaced by engineered (cohesion less) backfill having angle of friction not more than 27 degrees and the same shall be loosely compacted (unit weight 1.8 T/m3). In case of undrained sheer strength of the dugout soil = 0.5 T/m2 the dugout soil itself can be used as backfill. The trench shall be deeper by at least 500 mm. The trench shall be evenly and sufficiently padded to keep the pipe, when in place, at least 500 mm above the bottom of excavated trench. Acceptable padding shall be placed under the pipeline before its installation and around it after installation, to establish at both sides and on top of the pipe a permanent layer of padding. The thickness of compacted padding shall be at least 500 mm. Supports shall be provided for the pipeline by use of sand/soft soil bags or intermittent transverse berms in the ditch bottom comprising gravel/rock-free material, with a width of 15-20 cm and at an interval of approximately 7 meters. Note: (i) Item to be operated under specific instructions from Engineer-in-Charge. (ii) Cost of additional depth of 500mm & width of 200/300 mm trenching for this item shall be included in this item itself. Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
20
34857
-
... More
EARTH ELECTRODES: Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site En gineer, Including the cost of all labour, tools, materials etc. complete in all respects.
40
745810
-
... More
Weather shade, Chajjas, corbels, etc. including edges.
55
56096
-
... More
Providing and fixing ball bearing for rolling shutters.
2
1116
-
... More
Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sea ling compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge.
1790
1280985
-
... More
Foundations, footings, bases for columns
132
50016
-
... More
Suspended floors, roofs, landings, balconies and access platform
173
159490
-
... More
Supply fixing and erection of modular cable transit (MCT) for cable entry to building in proper frame including supply of peelable t ype, spare block, stay plates compression wedgs etc. with all accessories as per specification considering 20 % minimum spare in eac h module to be installed as per instruction of Engineer in charge/ site engineer: Galvanised mild steel frame with packing space of Min.120x240 mm with multi diameter blocks and accessories with peeling off arrangement to adjust cable size from 3.5mm to 99mm outer dia
28
680257
-
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates:
-
-
-
... More
1", 800#,GATE/BALL,HOV W/W
200
474832
-
... More
1/2" Cable Glands
25
3183
-
... More
Internal Coating of pipes including welding joints with solvent free epoxy (min. 600 microns) including surface preparation by abras ive blasting, supply of approved materials, tools, tackles, comsumables, labour, equipment etc. and completing the job in all respec ts as per specification and instructions of the Site Engineer / EIC.
100
291224
-
... More
18" x 600# Equal Tee
3
61047
-
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 19 mm
1400
178597
-
... More
Laying of Owner-supplied pre-coated mild steel line pipes, including arranging all additional land/construction corridor, beyond Owner's ROU/ROW, required for Contractor's storage, fabrication, access for construction site, movement of construction equipment etc., receiving and taking over Owner-supplied materials, handling, transportation etc. from Owner's issue point to work site, stringing along Right of Way (ROW)/ pipeline corridor, providing labour, equipment and supply of other inputs & materials/ consumables necessary to perform and complete the work in all respects in accordance with the contract including, but not limited to, the following works:- - Taking delivery of pre-coated/ bare pipes from the designated stockpile location (loading of pipes onto pipe trailors placed inside stockpile by mainline contractor shall be done by Owner's authorized agency), including placing of pipe trailors for taking delivery of pipes from designated stockpile, carrying out holiday detection and verification of pipes at the time of taking delivery), transportation of pipes to ROW/ work site/ Contractor's storage location etc., - Clearing and grading of ROW/ pipeline corridor, cutting of trees, vegetation etc. including keeping record of trees cut, including de-watering etc., - Stringing of pipes along ROW including providing straw bags/ soft padding below pipe (in Rocky areas requiring blasting for preparation of trench, pipes shall be strung after the blasting operation and clearing of trench as per instructions of Site Engineer/ Engineer-in-Charge), - Trenching to all depths to maintain clear earth cover as per specification and to fit minimum bend radius, by excavation in all kinds of terrain & soil, including stripping top soil to a depth of 30cm to the full anticipated width of the ditch and storing this material separately along the ROW to allow re-depositing of the same on top of the backfilled ditch (in cultivable and other areas specially designated by Owner), - Carrying out repair of pipe & coating defects for defects occurring after "taking over" of pipes from Owner, replacement in the case of non-repairable defects and repairing damages to pipe coating including defects/ damages occurring during transportation & handling, - Aligning, bending, lining up, cutting and beveling (as required) of pipes for field adjustments, welding (manual / semi-automatic / automatic), physical inspection of all weld joints by qualified welding engineer/ inspector & carrying out repair of weld-joints found defective, - Carrying out 100% radiographic inspection (by X-Ray)of all field weld joints for initial 1(one) Km in each Mainline Spread, Crossings and other specific locations as per Specifications and Special Conditions of Contract (SCC) and 20% radiographic inspection (by X-Ray) for the balance portion (excluding crossings and other specific locations) and destructive testing of one weld joint in each Spread as per specification and direction of Site Engineer, including providing Crawler type Automatic X-Ray machine and external X-Ray machine and all other requisite equipment, labour, supervision, materials, approved films, approved consumables, all facilities and personnel to process, develop, examine and interpret radiographs (by qualified and experienced Radiography Inspector), providing all facilities to Owner's representative(s) for examining radiographs and other tests as required, carrying out repair of weld-joints found defective, carrying out re-radiography and other tests as required on repaired joints, etc., - Carrying out coating of all field weld joints, by qualified coating insulators, including supply of approved joint coating materials, providing all equipment, materials and consumables necessary to carry out the job as per manufacturer's recommendation, - Installation of hot-pulled bends at required locations in mainline (bends to be fabricated from Owner-supplied bare pipes) including cutting, beveling, fitment, coating the bare bend pipe with approved heat shrink sleeve coating, - Carrying out holiday detection, at specified voltage level corresponding to coating type and as per specifications, and repair of coating, if any, -Laying pipeline by open-cut method at crossings viz., cart-track, village road, metalled/ un-metalled roads, minor water courses (MWC) etc.,(except crossings identified as "Cased", "Submerged" & "HDD" crossings ) and restoration of the crossing site to original condition including performance of additional works for strengthening of banks of water courses etc., - Lowering the pipeline in trench, tieing-in, backfilling with excavated earth and/or other suitable soil (top soil stored separately during trenching shall be backfilled on top of the ditch) as directed by Site-Engineer, - Carrying out air cleaning, gauge pigging and hydrostatic testing (to specified pressure) of the complete pipeline (excluding those HDD crossing sections not under the scope of this tender) including providing 'pre-testing' of designated sections as approved by Engineer-in-Charge, providing all equipment, pumps, fittings, instruments, dead weight tester etc. and services, supervision, labour, consumables, testing of water, supply & injection of corrosion inhibitor, locating leaks, if any, and rectification of defects attributable to Contractor, re-testing after rectification etc. and cleaning the pipeline section after successful hydrotesting, - All tie-ins, including tieing-in with HDD sections under this tender and also with HDD sections not covered under this tender (tie-ins with HDD sections not under this tender shall be paid separately as per relevant item of SOR), - Obtaining work permits/ NOC from various authorities having jurisdiction before execution of work and complying with all stipulations/ conditions/ recommendation of the said authorities - Supply and installation of 1.0 mm thickness & width (D+300) warning tape over entire pipeline as per relevant specification - Final clean-up and restoration of ROW/ construction corridor, field bunds etc., obtaining NOC from statutory authorities (as required) and obtaining NOC from respective land owners in respect of final restoration of their land etc, disposal of debris and returning surplus material to designated disposal areas/ storage location, as directed by Engineer-in-Charge, restoration of land, facilities and boundary wall etc. for facilities dismantled/ damaged by Contractor during construction, - Preparation of as-built drawings, pipe book and other records as per specifications etc., - Supply of all materials (other than those specifically undertaken to be supplied by the Owner under the contract) necessary for performance of work or for temporary or permanent incorporation in the works, and - All other acts, deeds, matters and things necessary to make the pipeline ready for commissioning and completing the works in all respects as per drawings, specifications and instructions of Site Engineer/ Engineer-in-Charge. NOTE: I) The rate quoted against this item shall include cost of excavation and backfilling of trench of standard width (as per approved drawings) in all kinds of soil for laying Mainline pipe. II)The Mainline work includes and covers the work in all types of crossings viz., roads, drains, minor water courses (MWC), low lying areas, ponds, plant area, underground utilities, pedestrian crossings, etc. except those crossings identified as "Cased", "Submerged", "Shallow HDD" & "HDD" crossings for which relevant item of SOR shall be applicable. III) Concrete coating, if necessary, for laying pipelines across ponds, low lying areas etc. shall be paid separately as per relevant item of SOR. IV) Cost of all materials required in repair and/ or rectification of defective work caused due to reasons not attributable to any act or omission of the Owner shall be chargeable to Contractor account. The Owner will supply the additional materials from its designated store/ godown (insofar as constitutes Owner-supplied materials) required for the repair/ rectification work on chargeable basis. The cost of such material shall be as determined by the Engineer-in-Charge plus an additional charge of 15% of the cost of material shall also be levied. The decision of the Engineer-in-Charge, as to the cost of the material, shall be final and binding on the Contractor. VI) In the course of hydrostatic testing of the mainline section, if any defective portion/ pipe/ work is found to be due to a defect in the pipe attributable to the Owner, the Owner shall supply the additional necessary pipes at Owner issue point required for the work free of cost to the Contractor, but the Contractor shall supply all other materials and inputs at his own cost for replacement of pipe section. The Contractor shall be paid a lump sum amount for each such failure (refer relevant clause of Special Conditions of Contract of the tender documents) for the work involved in locating & identifying the defects in the mainline and in their repair/rectification as per the specification. Failure in one or more pipes in a section during a single pressurization cycle shall be considered as a single failure for the purpose of compensation for hydrostatic test failure on account of manufacturing defect. VII) Installation of the hot-pulled bends in Mainline, including cutting beveling of pipes, fitment etc., shall be inclusive in the Mainline rate. Payment for fabrication of hot-pulled induction bends, as per specifications, shall be done separately as per relevant item of SOR. The hot-pulled bends shall be coated at site with heat shrink sleeve coating. The cost of the same shall be deemed to be included in this item for Mainline laying.
-
-
-
... More
Supply and delivery of 10 KL MS Sump tank with external coating
4
2472517
-
... More
12.75" ODx 0.250" WT IS3589 Pipe
500
2467380
-
... More
Single Basket Type Strainers along with all accessories, JIB Crane, etc as applicable. Taking delivery of equipments, shifting/trans porting within station premises, placing on pre-constructed foundations, assembling together all sub-assemblies, levelling, alignmen t, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instruction, specifications and instr uctions of Site Engineer / EIC., Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equip ment
5
233763
-
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for ho t & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inclu ding testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
3" x 150# 90° LR Bends
40
22231
-
... More
Fasteners for Flanges 1" x 600# (0.625" Dia. X 4.00" Length)
236
21164
-
... More
Pipe size 3 inch NB to 6 inch NB
400
255352
-
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations . (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]
200
731
-
... More
BRICK SOLING: Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable trenches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , a s per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
2000
2023322
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:ER Probe Extension Adapter
4
100477
-
... More
Magnesium Anode : Supply, Installation , testing and commisioning of Magnesium anode (minimum 5 Kg each) including its tail cable o f size of 1c x 10 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, special back-fill mat erial ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling etc. as per spe cifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall be carried out as per the directions of the EIC/ Site Engineer and as per AFC drawings. Magnesium Anode
50
392305
-
... More
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources]
32
17831
-
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of ceme nt mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per directions of the Eng ineer-in-Charge :
-
-
-
... More
2" SWMG ANSI 600#
100
23836
-
... More
2", 150#,SWING CHECK VALVE, F/F
5
14986
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
159
163651
-
... More
PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive bl asting or with power wire brush (wherever sand blast cleaning is not possible, free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100 percent solvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC.
800
2329792
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's sp ecification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].
216
16248
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 100 mm
5
10468
-
... More
FLP/ WP Junction Box, Type C. (Nos. of terminals: 60 Nos.; Bottom entry: 1 No. - 1 1/4" & 1 No.- 1"; Left side entry: 1 No. - 1" & 3 Nos.- 1/2"; Right side entry: 2 No. - 1" & 2 Nos.- 1/2") along with FLP cable glands & FLP plugs for all the cable entries of the J unction as per technical specifications.
29
234480
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
116
1506616
-
... More
1" SWMG ANSI 600#
59
7518
-
... More
Decorative Light fittings - Supply, installation, connection, earthing and testing of the following fittings, including supply and i nstallation of drop pipes, hooks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other requir ed materials etc. as per specifications, drawings and directions of the Site Engineer including cost of all labour, tools, materials etc. complete in all respects.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from t he approved make list given in the specifications: LED light fittings with LEDs, Sereno LED-Suspended-SP824 P LED 30S-5000 GR OD or approved equivalent:Supply and fixing of surface mounted weather proof light SP824 P LED 42 W having 2950 lumens output fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector block s etc including installation with LED of approved make.
14
169376
-
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square w ith a height of 8 mm and weighing not less than 100 gms.
6
801
-
... More
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
1
776
-
... More
Exhaust fan - Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greav es or of approved make fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and conne cting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications , drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.12" Sweep
2
14057
-
... More
Installation of Wall mounted Cabinet (switching closet including network switch , UPS etc in wall mount cabinet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
3
27335
-
... More
Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of h igh carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equi valent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 m icrons. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at regul ar intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed conditi on should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per dr awings, specifications and directions of the Engineer-in-Charge.
440
261868
-
... More
15 mm nominal dia pipes
2
1089
-
... More
8", 600# GATE/ BALL, MOV/HOV, W/W
4
75968
-
... More
6"x4" 600# Unequal Tee
6
34210
-
... More
Corrosion monitoring probes: Installation of corrosion monitoring probes including 2" Flareweld on station piping at desired locatio n and 12 O'Clock position for mounting of ER Probe under the supervision of site engineer. Flareweld assembly shall be supplied by o wner. The job complete in all respect with material, tools & tackles, consumables etc.
4
76132
-
... More
Conducting Mututal Interference Survey among the new and existing pipelines / facilities /foreign pipeline by taking PSP survey of a ll the pipelines as per approved procedure to determine level of interference at different places along the pipeline and at point of crossing in common ROW including identifying points and providing the data/ record in graphical form and carrying out all necess ary work for mitigating the interference observed among the pipelines , including retesting the same to ensure efficacy of the remed ial measures undertaken.The contractor shall submit a full final report with detailed PSP readings at all TLPs along with graphs in 3 sets.The item should be complete in all respect including survey, work for mitigating the interference and post mitigating survey as per specifications/directions of site engineer / Engineer-in-Charge.Mutual Interference Survey
22
204053
-
... More
AS BUILT DOCUMENTATION
-
-
-
... More
12" SWMG ANSI 150#
82
48863
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
129
1164919
-
... More
Electrical CP Services
-
-
-
... More
6", 600#/900#, SWING CHECK VALVE, F/F
2
19783
-
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and lengt h below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the le ngth of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads [No tes: (1) Length of pile for payment shall be measured up to bottom of pile cap. (2) Truck Mounted rotary/ TMR/ Tubewell boring machi ne shall not be used] :
-
-
-
... More
8.625" in Rocky Soil
10
296416
-
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved.
10
1847
-
... More
Water gel blanket
2
32664
-
... More
Carrying out air drying of the pipeline system as per specification and direction of Engineer-in-Charge including supply of all labo ur, materials, equipments, instruments, pigs, barrels etc. complete in all respects.
-
-
-
... More
In Ordinary rock
38
17815
-
... More
2"x ANSI 600# HOV F/F API 6D Ball Valve
19
780103
-
... More
Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1669
1148920
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
SAND FILLING: Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of S ite Engineer / Engineer-in-Charge
400
392586
-
... More
1" BLRF 600#,ASME B16.5
8
2718
-
... More
1" 3000 Class HALF COUPLING
148
32133
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 20 Kg / Cm2 as per the technical specifications attached in the Tender.
3
16932
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specifica tion including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfini sher in sub-base/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of the Engineer-in-Charge.
130
456776
-
... More
2", 150#,GATE/ BALL, HOV, F/F
41
147462
-
... More
8.625" in Rocky Soil
10
370520
-
... More
2" SWMG ANSI 150#
10
1168
-
... More
INSTALLATION OF LEVEL SWITCH: Installation, assistance in testing and commissioning of Level Switch of various lengths as per drawin gs, specifications and the directions of Engineer in-charge/ Site engineer. The scope shall include installation, assistance in test ing and commissioning of Level Switch (LS) on sump tank / fuel tank/ surge relief tank / transmix tanks etc. as per the OEM recomme ndations, vendor drawings, directions of engineer in-charge/site engineer and other apporved drawings.
5
38139
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
2275
862019
-
... More
SHOCK TREATMENT CHART: Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Lan guage.
4
10220
-
... More
4" x 150# 90° LR Bends
16
16708
-
... More
2", 600#, SWING CHECK VALVE, F/F
6
19781
-
... More
INSTALLATION OF LEVEL TRANSMITTER: Installation and testing of Level Transmitter (of all types i.e contact type / non contact type etc.). The scope shall include installation, assistance in testing and commissioning of Level Transmitter (LT) on sump tank / crude oil fuel tank / fire water tank / surge relief tank / ransmix tanks etc. along with tank bottom display (having independent stand, c anopy etc.) as per the OEM recommendations, vendor drawings, directions of engineer in-charge/site engineer and other apporved drawi ngs. in-charge/ Site Engineer.
7
111232
-
... More
Insulating Coupling Erection:, Taking delivery,shifting/transporting within station premises and installation of Insulating Coupling s of the following sizes and pressure class, at elevations specified in the drawing, checking resistance value by meggar test before and after erection levelling, aligning and checking, making welded connections to the piping, coating & wrapping and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instructions, specifications and instruc tions of Site Engineer / EIC.
-
-
-
... More
Equal Flow-Tee 18" x 18" -600#
2
576253
-
... More
Supply of Transition pits for building entry points as per tender specifications
4
56918
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Type A (With Ingress Protection IP:55)
43
801586
-
... More
3" 600# 90 deg LR Bend
6
9593
-
... More
Cat 6 UTP (LAN) Networking Cable as per tender specifications
500
14160
-
... More
3" SWMG ANSI 600#
20
7150
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
50245
5580882
-
... More
3" BLRF 600#,ASME B16.5
2
3096
-
... More
LT Panel
-
-
-
... More
8.625" in Rocky Soil
910
26093340
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete.
2
1954
-
... More
24 Port L2 Network Switch with Optical Interfaces as per tender specifications
3
597272
-
... More
Fasteners for Flanges 8" x 600# (1.125" Dia. X 8.25" Length)
96
40894
-
... More
1:6 (1 cement : 6 fine sand)
72
28047
-
... More
PILE WORK :
-
-
-
... More
Supply of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications
20
279707
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with :
-
-
-
... More
2" ANSI 150# Equal Tee
12
4403
-
... More
1" NB Pipe Joints RT
200
118000
-
... More
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge :
-
-
-
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. G ARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer -in-Charge.
44
58684
-
... More
10x120 mm
120
21429
-
... More
SHALLOW HDD (without OFC) #Execution of road/other crossing by Shallow Horizontal Directional Drilling (HDD) technique including mobilization & de-mobilization at site(s), supply of all materials as per the `Scope of Supply' and all consumables, equipment, manpower & other resources and arranging the required land for site preparations and execution of, but not limited to, the following works in accordance with the specifications, drawings and as per all provisions of the contract document complete in all respect as per the instructions of the Engineer – in – charge /Site engineer. #Taking delivery and transportation of Owner-supplied 3LPE coated pipes to the work site from designated stockpile location, inspection of the coated pipes visually and/or with holiday detector for defects, including arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position. #Complete site preparation including arranging of required land, setting up of fabrication yard, preparation of temporary arrangement for pipeline stringing, launching etc #Carrying out repair of pipe defects, replacement in the case of non-repairable defects and repairing damages to pipe coating including defects/ damages occurring during transportation and handling. #String preparation including repair of pipe and pipe coating defects, welding, non-destructive testing of welds including 100% radiography (by X-ray), supply of films & all equipment and providing all facilities to Owner's representative(s) for examining radiographs, repair of defects in the welds and re-testing etc. #Carrying out pre-installation hydrostatic testing of the complete pipeline string, as per the specifications, including repair of defects and retesting etc. #Coating of the field joints of the pipe string to be installed by shallow HDD method with DIRAX heat shrink sleeves of M/s Raychem's make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make used for HDD crossings. #Repair of all coating damages in the pipe section to be laid by shallow HDD method by full encirclement sleeves using suitable cut sections of approved quality of heat shrink sleeves of M/s Raychem make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make. #Installation of the pipeline below the Road/ other utility horizontally by shallow HDD operation to the correct profile as per the approved drawings in a pre-reamed hole of appropriate. #Carrying out post-installation coating survey as per approved procedure. #Restoration, clean-up and disposal of drilling fluid, waste and all other surplus materials etc. #All other works not specifically listed herein, but required as per specifications, drawings, provisions of the contract document, calculations and construction method statement, leading to successful completion of the works. Note :- The item to be operated under the specific instruction of Engineer in ChargeNote :- The item to be operated under the specific instruction of Engineer in Charge Pipe 8.625" (without OFC)
300
2398704
-
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in req uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge :
-
-
-
... More
8.625" in Rocky Soil
460
11681056
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well Un-plasticized P.V.C. medium well screen (RMS) pipes wi th ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per d irections of the Engineer-in-Charge :
-
-
-
... More
Installation of CJB / AJB as per technical specifications.Installation of CJB / AJB as per technical specifications.
6
119620
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
19
155625
-
... More
6 NPS (6.625" OD x 0.250"/ 0.280" WT) API 5L/ ASTM A106/ A333/ A53 Pipe:
350
1464498
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank.
1000
11705
-
... More
6", 150#/300#, SWING CHECK VALVE, F/F
2
17985
-
... More
1" Plugs
15
1311
-
... More
With cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 10 mm nominal size).
21
443352
-
... More
Reflective radium sticker letter printing and apply in background stickering including pasting and fixing with supply of all manpowe r, equipments, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instr uction of EIC/ Site Engineer to complete work in all respects.
100
193048
-
... More
Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.
2
207512
-
... More
100x100 mm size P-type
1
3068
-
... More
Supply of ASTM A106 Gr.B /A333 pipes at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document:
-
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
30
12037
-
... More
EARTHING SYSTEM SET (06 PITS):Supply, installation, testing of earthing system consisting of 6 earth pits of perforated GI pipes ear thing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete as per drawings, specifications and directions of the site engineer, including cost of tools, materials etc complete in all respects a s per drawing The job shall also include testing of each earth pit and the entire earthing system on whole. (Note: Earthing for fiel d instruments shall be provided from Station earth grid covered in Electrical SOR.)
1
109000
-
... More
350 mm diameter
9
15489
-
... More
Neat cement punning.
1123
93740
-
... More
Supply and installation of MDF (Main distribution frame) /Distribution box of 50 Pair capacity as per specifications
1
6704
-
... More
Supply of 8IN, 600 # Series -Short Neck Scrapper Detector Switch- As per Tender Specification
4
423377
-
... More
18" WNRF 600# ASME B16.5
12
940082
-
... More
Cable Laying: Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and insta llation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all lab our, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm
1850
75837
-
... More
Supply & installation of MAGNETIC PROXIMITY SWITCH with suitable junction box for termination of leads/cable for extending contact t o control system for unauthorised entry of building / MOV fencing.
3
58007
-
... More
"....in Continuation of previous.......welds and re-testing etc. #Coating of the field joints of the pipe string to be installed by HDD method with DIRAX heat shrink sleeves of M/s Raychem's make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approv ed make used for HDD crossings. #Repair of all coating damages in the pipe section to be laid by HDD method by full encirclement sle eves using suitable cut sections of approved quality of heat shrink sleeves of M/s Raychem make, DDXTM Directional Drilling Kit of M /s Canusa or of any other approved make. #Fabrication of 89mm OD steel conduit with an inner duct of 40mm OD HDPE pipe for OFC (wher ever OFC has to be laid along with the carrier pipeline). #Supply & fixing of easy to install heat shrinkable duct end caps for HDPE conduit for OFC (wherever OFC has to be laid along with the carrier pipeline). #Carrying out air cleaning, gauge pigging and pre-in stallation hydrostatic testing of the complete pipeline string, as per the specifications, including repair of defects and retesting etc. #Installation of the pipeline / pipeline and OFC conduit as a bundle crossing below the rivers, NH, SH, Expressways, Railways, etc by single horizontal directional drilling operation to the correct profile as per the approved drawings. #Carrying out post-ins tallation hydrostatic testing of HDD pipe string (along with transition pipe section). #Carrying out post-installation coating surve y as per approved procedure. #Restoration, clean-up and disposal of drilling fluid, waste and all other surplus materials etc. #Tran sportation of surplus Owner-supplied pipes to the designated stockpile location of the Owner. #Preparation of as-built drawings and other records etc. #All other works not specifically listed herein, but required as per specifications, drawings, provisions of the contract document, calculations and construction method statement, leading to successful completion of the works. Note:-The Contractor shall have the option for installation of 89 mm OFC conduit as Bundled HDD installation along with the HDD inst allation of carrier pipe OR as a separate HDD instalation. However, the payment and payment terms shall remain the same in both the cases."
-
-
-
... More
Foundations, footings, bases for columns
667
252732
-
... More
400 mm diameter piles
4
15702
-
... More
12.75" ODx 0.250" WT IS3589 Pipe
100
876504
-
... More
Supplying, erecting and fixing in position 600 mm wide Colour Bond Ridge Cap and corner flushing rolled from 0.5 mm TCT BHP Zincalum e AZ-150 High Tensile Steel (550 MPa Yield Strength) including fixing to sheets stiched by (4.8 mm x 16 mm) Hex Head stitch screws, with metal bonded EPDM washers all complete as per specifications and directtions of the Engineer-in-Charge.
7
10822
-
... More
Extra over item of IRONITE NO. 1 flooring for use of IRONITE NO. 3 (Metallic Dry Shade) in lieu of top layer of IRONITE NO.1
52
33931
-
... More
Supply and installation of SS sampling point as per drawing/ instruction of EIC
3
42306
-
... More
8" NB Pipe Joints RT
60
114412
-
... More
PA system/ Loudhailer/ megaphone
3
94634
-
... More
"AC point wiring: Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box "
2
8194
-
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 25 mm
800
144913
-
... More
Supply of Cathodic Protection unit of approved make, complete in all respects as given in the specification with all its accessories to ensure trouble free operationAutomatic type Cathodic Protection Transformer Rectifier (CPTR) unit with 230 V AC input and 25 V,2 5 A DC output rating with SCADA linkage facility as per specifications
1
402071
-
... More
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
2
4622
-
... More
Unequal Flow-Tee 8" x 6"- 600#
4
475334
-
... More
Supply of high mast tower as per technical specification enclosed IOCL-PL-ELEC-HMT-1.0. The job includes supply of (1) 30 M high mas t structure with lantern carriage with raising/lowering mechanism by FLP motor, min. steel plates sheet thickness shall be 5 mm (2) LED flood light fixtures & lamps- 350 W (120 Lumens/W min. efficiency) - 12 nos. & LED Aviation obstruction lights - 02 nos. (3) Lig htning arrestor-1200 mm length finial (4) FLP feeder pillar board with cables from feeder pillar to base compartment of high mast (5 ) Foundation bolts. The vendor will submit the foundation design based on soil strata (soil report shall be provided by IOCL) of lo cations. Further vendor shall provide supervision for testing & commissioning of high MastFoundation bolts with anchor plate & commo n template for high mast tower (30M/20M Height)
2
44685
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1697
1406688
-
... More
12" SORF 150#, ASME B16.5
122
722967
-
... More
GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ.
-
-
-
... More
Fasteners for Flanges 3" x 150# (0.625" Dia. X 4.00" Length)
80
5097
-
... More
Supplying at site, GI structural items such as flat, bars, chequered plates, angles, beams channels, commercial quality pipes,bolts & nuts, washers, grouting bolts, fabrication and erection of various structures items including supply of all other inputs such as l abour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specificat ions and instructions of the Site Engineer / EIC.
3000
739860
-
... More
For fixed portion :
-
-
-
... More
100 mm diameter :
-
-
-
... More
2" WNRF 600#, ASME B16.5
100
94990
-
... More
Supply of 18IN, 600 # Series -Short Neck Scrapper Detector Switch- As per Tender Specification
3
354260
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Providing and fixing removable raised/ false access flooring with system (Unitile Solid Feel (USF) 800 or equivalent) and its compon ents of approved make for different plenum height with possible height adjustment up to 50 mm, comprising of modular load bearing fl oor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (A) Providing at required spacing to form modular framework, pedes tals made out of G.I. tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75 mm x 75 mm x 3.5 mm welded with G.I. fully threaded stud 16 mm outer diameter with two G.I. Check nuts screwed on the stud for level adjustment up to 50 mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the sub-floor (base) through base plate using epox y based adhesive of approved make or the machine screw with rawl plug. (B) Stringers system in all steel construction hot dipped gal vanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head usi ng fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel. The system shall pro vide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-Charge. (C) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange) . The panel should be corrosion resistant epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip non-combustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1 mm thickness for superior adhesion and Sur face flatness within 0.75 mm.The panel is to withstand a Concentrated Load of 363 Kg applied on area 25 mm x 25 mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minim um 1250 Kg/sq.m. and, an impact load of 50 Kg all complete as per the approved manufacturers specification and as per the direction of the Engineer-in-Charge. All specification must be printed on the side of the panel to ensure the quality of the product :
-
-
-
... More
1/2" OD SS Tube End cap as per tender specifications
100
11515
-
... More
16 A power plug point wiring: Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. m m. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthi ng insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug po int per circuit) as per specifications and drawings
6
22225
-
... More
8.625" in Normal Soil
620
8267080
-
... More
415 V AC 3 phase / 230 V AC single phase motors - Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (includi ng space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power ca bles, earthing of the motor/actuator/ connecting the thermistor, installing the controller in LT panel, earthing the motor frame, ar mour etc. as per the drawings, erection manuals, and as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the required FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips , labour, tools, materials, etc., as required in all respects for all types of motors/heaters/thermistors/actuators etc.: Capacity u pto and including 1 KW
21
71559
-
... More
4" NB Pipe Joints RT
80
114601
-
... More
4" SORF 150#, ASME B16.5
52
48106
-
... More
Supply of Jacking Bracket for 600# Scrapper Detector
1
62372
-
... More
Supplying, providing and filling fine sand in trenches at Seismic Fault location crossing or running parallel to pipeline (including additional 500 mm deep & 200/300 mm wide trenching) around mainline pipe for providing a minimum padding thickness of 500 mm on top as well as at bottom of the mainline pipe(for the complete trench width). Note: (i) Item to be operated under specific instructions from Engineer-in-Charge. (ii) Cost of additional depth of 500mm & width of 200/300 mm trenching for this item shall be included in this item itself. Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
1000
2819020
-
... More
3", 600#,GATE/ BALL, HOV, F/F
4
23741
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irections of the Engineer-in-Charge :
-
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) :
20
39773
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm
15000
887478
-
... More
MASONRY WORK :
-
-
-
... More
8.625" in Normal Soil
10
135936
-
... More
Cold cutting of piping (18" OD): After evacuation of product from the piping, the Contractor shall arrange suitable cold cutting machine, associated tools & tackles, operators, consumables, compressor, hoses etc. to cut pipe at mentioned location as per instructions of Engineer-in-Charge/ Site Engineer(the location shall be accessible for installation of the cold cutting machine before carrying out the job which is not covered in the scope of this item). The Contractor scope is including all required manpower, equipments, tools, tackles, materials, consumables etc. for completion of work in all respects as per instructions of Engineer-in-Charge/ Site Engineer. Note: Unit #EA# shall mean one full circumferential cut. Note: The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal.
2
258461
-
... More
First Aid Box with Snake serum
2
4592
-
... More
Wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O. The item includes modular plate & switch box/ gang box for fixing the face plate.
22
8800
-
... More
Supply of Joint pit markers for OFC joint locations as per tender specifications
20
78281
-
... More
8" SWMG ANSI 600#
8
7608
-
... More
INSTALLATION OF SUB SOIL TEMPERATURE TRANSMITTER: Installation and assistance in testing & commissioning of Sub Soil temperature ele ments/temperature transmitter(TT) as per the directions of engineer in-charge/site engineer and drawings.
2
23019
-
... More
Installation of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications, drawings and directions of Engineer-in-charge/ Site Engineer
15
23080
-
... More
Extra for pre finished nosing in treads of steps of Kota Stone slab.
6
1182
-
... More
Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by providing weat her/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and directions of t he Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 :
-
-
-
... More
2" x 150# 90° LR Bends
40
8968
-
... More
Centering and shuttering including strutting, propping etc. and removal of formwork for :
-
-
-
... More
Supply of high mast tower as per technical specification enclosed IOCL-PL-ELEC-HMT-1.0. The job includes supply of (1) 30 M high mas t structure with lantern carriage with raising/lowering mechanism by FLP motor, min. steel plates sheet thickness shall be 5 mm (2) LED flood light fixtures & lamps- 350 W (120 Lumens/W min. efficiency) - 12 nos. & LED Aviation obstruction lights - 02 nos. (3) Lig htning arrestor-1200 mm length finial (4) FLP feeder pillar board with cables from feeder pillar to base compartment of high mast (5 ) Foundation bolts. The vendor will submit the foundation design based on soil strata (soil report shall be provided by IOCL) of lo cations. Further vendor shall provide supervision for testing & commissioning of high MastOutdoor stand mounted FLP/WP feeder pillar
2
323526
-
... More
EARTHWORK :
-
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigmen t to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse san d) :
122
248600
-
... More
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per the directions of Engineer-in-Charge.
4
1709
-
... More
Current Attenuation(CAT) SurveyCarrying out the Current Attenuation(CAT) Survey at 50 meters interval by measuring current loss alon g the mainline pipe and using Radio Detection Instruments. Completing the entire work as per specification and EIC`s direction inclu ding all equipments with its accessories etc.tools, tackles, Battery transportation (Vehicle), related equipments,consumables, if an y labour /manpower and any / all relevant data collection as may be deemed necessary for carrying out the survey and interpretation /presentation of the results including submission of reports complete in all respect thereof. Also locating the exact position of bu ried pipeline/defect of Pipeline coating.Route mapping of the entire stretch at an interval of 10M with the help of GPS instrument ( to be arrange by contractor)and submission of the hard and soft copy to the EIC.
2
15295
-
... More
Shallow HDD with OFC "Execution of road/other crossing by Shallow Horizontal Directional Drilling (HDD) technique including mobilization & de-mobilization at site(s), supply of all materials as per the `Scope of Supply' and all consumables, equipment, manpower & other resources and arranging the required land for site preparations and execution of, but not limited to, the following works in accordance with the specifications, drawings and as per all provisions of the contract document complete in all respect as per the instructions of the Engineer – in – charge /Site engineer. Taking delivery and transportation of Owner-supplied 3LPE coated pipes to the work site from designated stockpile location, inspection of the coated pipes visually and/or with holiday detector for defects, including arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position. Complete site preparation including arranging of required land, setting up of fabrication yard, preparation of temporary arrangement for pipeline stringing, launching etc Carrying out repair of pipe defects, replacement in the case of non-repairable defects and repairing damages to pipe coating including defects/ damages occurring during transportation and handling. String preparation including repair of pipe and pipe coating defects, welding, non-destructive testing of welds including 100% radiography (by X-ray), supply of films & all equipment and providing all facilities to Owner's representative(s) for examining radiographs, repair of defects in the welds and re-testing etc. Carrying out pre-installation hydrostatic testing of the complete pipeline string, as per the specifications, including repair of defects and retesting etc. Coating of the field joints of the pipe string to be installed by shallow HDD method with DIRAX heat shrink sleeves of M/s Raychem's make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make used for HDD crossings. Repair of all coating damages in the pipe section to be laid by shallow HDD method by full encirclement sleeves using suitable cut sections of approved quality of heat shrink sleeves of M/s Raychem make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make. Repair of all coating damages in the pipe section to be laid by shallow HDD method by full encirclement sleeves using suitable cut sections of approved quality of heat shrink sleeves of M/s Raychem make, DDXTM Directional Drilling Kit of M/s Canusa or of any other approved make. Fabrication of 89mm OD steel conduit with an inner duct of 40mm OD HDPE pipe for OFC (wherever OFC has to be laid along with the carrier pipeline). Supply & fixing of easy to install heat shrinkable duct end caps for HDPE conduit for OFC (wherever OFC has to be laid along with the carrier pipeline). ... continuation in next line"
-
-
-
... More
Measuring, recording and submitting the cathodic protection readings along the entire pipeline by repeated adjustments of the settin gs of the CPTR/CPPSM units etc as per specifications for achieving full/maximum protection of all the stretches as per the criteria of protection mentioned in the specifications. Measuring the relevant readings at the cathodic protection stations and "pipe to soi l potential" readings at all the test lead locations along the pipeline including the CP station parameters like current(AC/DC), vo ltage(AC/DC),circuit resistance,battery voltage/current etc.,preparing and submitting pipe to soil potential profile, graphs and ot her data pertaining to the cathodic protection of the pipeline,job complete in all respects as per specification and instructions o f Site Engineer / Engineer-in-Charge, including cost of all labour, instruments and services rendered.CP Readings
22
12570
-
... More
Laying submerged crossings using pipes with or without concrete sheathing across major water course crossings and providing all works ,labour, inputs and materials/consumable necessary to perform and complete the work in all respects in accordance with the contract, including taking delivery and transportation of Owner-supplied coated pipes to the work site from designated stockpile location, inspection of the coated pipes visually and with holiday detector for defects, arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position, arranging the required additional land for construction purpose, preparation of site, aligning, bending, lining up and welding the pipe, 100% radiographic inspection of weld joints, coating of field weld joints, holiday detection and repair of coating, hydrotesting (both pre- & post-installation) and replacement of pipes/ defects, excavation of the trench to required depth, as per specifications, in all kinds of soil and conditions including rock trenching and maintenance of trench in all kinds of soil including rocky strata, if any, making bunds for stoppage of water flow, de-watering including installation of well-point system, and laying of the pipeline in approved trench, including de-watering, providing in-situ concreting at coated weld joints to effectively secure the HDPE conduit with mainline pipe, providing "Band IT" make stainless steel (SS) strips / clamps of 3/4" width for tying HDPE conduit with mainline pipe (two strips per pipe length), backfilling and final clean-up, stabilisation of the excavated banks by additional means, disposal of waste and surplus in accordance with the contract, and supply of materials (other than those specifically undertaken to be supplied by the Owner under the contract) necessary for or in the performance of the work or for temporary or permanent incorporation in the works and all other acts, matters and things necessary to complete the pipeline/ crossings in all respects according to the contract and as per directions of Site Engineer/ Engineer-in-Charge. NOTE : I)Depending upon the site condition & location of each submerged crossing, the Engineer-in-Charge, in consultation with the Contractor, shall decide upon the precise operations necessary for the performance of the work to lay the pipeline across the canal/ drain/ rivers and the cost of all such operations necessary shall be deemed to have been included in the rate for this item. II)Profile of drain / canal bed, ground & top of laid pipe shall be established jointly in presence of Owner both before and after laying the crossing, by taking levels with reference to nearby permanent structure. III)The banks of the crossing shall be stabilised and suitable brick/ stone masonry bank protection works shall be carried out for the entire ROW width to prevent bank erosion leading to exposure of the pipeline. The procedure for such measures shall be submitted for Owner's approval prior to execution. IV)Concrete sheathing work for submerged crossings shall be paid for separately under relevant item of Schedule of Rates.
-
-
-
... More
8.625" in Normal Soil
10
169920
-
... More
Installation of Infrared HYDROCARBON DETECTORS (point type / open pathtype), terminating the cables at field and control panel / RTU end, connecting to earthing grid by supplying and installing all the required materials such as supporting structure, canopy, cemen t concrete, painting, GI wire etc.(excluding supply of the Hydrocarbon detector) complete in all respectsas per specifications.
13
75050
-
... More
GENERAL WORKS :
-
-
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Type D (With Ingress Protection IP:55)
1
21294
-
... More
1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from n atural sources)
10
81493
-
... More
3 NPS (3.5" OD x 0.216"/ 0.438" WT) ASTM A106/ A333/ A53 Pipe
150
331521
-
... More
Single Push-fit Coupler (110 mm)
6
865
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
2
3529
-
... More
All types of soil :
-
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
4440
1370207
-
... More
FLP/WP PUSH BUTTON STATION - Supply ,erection,testing and commissioning of FLP/WP push button(ON/OFF) control station of approved m ake with /without ammeter for the motor off control at field including connection and termination of copper control cable, fabricati ng, earthing the supporting structure, painting the same, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries including the cost of all labour,tools, materials etc. complete in every respect as per t he specification and directions of the Site Engineer/Engineer-in-charge including the cost of all labour,tools, materials etc. compl ete in every respect as per the specification and directions of the Site Engineer/Engineer-in-charge: With Ammeter
4
44153
-
... More
Instrumentation
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level :
-
-
-
... More
Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge.
20000
2462188
-
... More
Supply of flame proof and weather proof fittings including EP/WP certificates as per the technical specifications attached.
-
-
-
... More
INSTRUMENTATION JOBS FOR MOTOR OPERATED VALVES (MOV)/ROSOV/ROV - Carrying out the instrumentation and control system jobs on the alr eady erected actuator assembly of motor operated valves (MOV)by making the necessary cable connection at field and control panel end (excluding the supply of cables) calibrating the control components, adjusting the limit switches, testing the whole assembly as p er drawings specifications and direction of the engineer in-charge/site engineer complete in all respect, including supply of suitab le size non-flame-proof cable glands, ferruls, drilling/cutting of plate for fixing glands at Control Panel end and the cost of all labour, tools, glanding, ferruling, consumables etc.
69
536288
-
... More
2", 600#, GLOBE VALVE F/F
6
23937
-
... More
80 mm nominal dia pipes
556
1453952
-
... More
Laying pre-coated pipes in Marshy areas with concrete sheathing including providing all equipment, works,labour, inputs and materials/consumable necessary to perform and complete the work in all respects, submission of construction procedure for Owner's approval, arranging the required additional land for construction purpose, preparation of site including dewatering, aligning, bending, lining up and welding the pipe, 100% radiographic inspection of weld joints, coating of field weld joints, holiday detection and repair of coating, hydrotesting testing and replacement of pipes/ defects, excavation of the trench to required depth in all kinds of soil and conditions including rock trenching and maintenance of trench in all kinds of soil including rocky strata, if any, and laying of the pipeline in approved trench, backfilling and final clean-up, stabilisation of the excavated banks, disposal of waste and surplus in accordance with the contract, and supply of materials (other than those specifically undertaken to be supplied by the Owner under the contract) necessary for or in the performance of the work or for temporary or permanent incorporation in the works and all other acts, matters and things necessary to complete the work in all respects according to the contract. NOTE: 1. Depending upon the site condition, the Engineer-in-Charge, in consultation with the Contractor, shall decide upon the precise operations necessary for the performance of the work to lay the pipeline across the canal/drain/rivers and the cost of all such operations necessary shall be deemed to have been included in the rate for this item. 2. Concrete sheathing work for marshy area laying shall be paid for separately under relevant item of Schedule of Rates. 3. Measurement for this item shall be as per pipe book covering laying in Marshy portion covering laying in Marshy portion covering entire concrete sheathing work only.
-
-
-
... More
50 mm nominal bore
1
1156
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 25mm x 3 mm copper flat
70
58420
-
... More
2"x ANSI 150# HOV F/F API 6D Ball
4
109159
-
... More
CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres inclu ding shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and ma terials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
2500
1979568
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fille ts, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering , shuttering, finishing and reinforcement, with :
-
-
-
... More
CO2 cartridge - 200 gm capacity for 9 kg DCP
12
9317
-
... More
Taking delivery, shifting within a road distance of 500 meters and installation & testing of the different instruments (like Pressur e Gauge, Pressure Switch, Pressure Transmitter, Temperature Transmitter, scrapper detector, level switch, level transmitter, flow sw itch etc.) of various ratings by fabrication and installing all the required pipe fittings with pressure pipes, valves, plugs, tees, nipples, junction box, cables, supply and erection of all other required materials such as the supporting structure clamps, cannopy , screws, nuts, bolts, aluminium sheets, GI wire, steel plats, cement concrete etc. complete in all respects including supply of sui table size non flame proof cable gland at control panel end and terminating the already laid cables at field, junction box and contr ol panel end, mounting the junction boxes as per the Drawings, specifications and directions of the engineer in-charge/site engineer including cost of all labour, materials, consumables, tools, tackles and services rendered etc. All the instruments shall have to b e properly connected to the earth pit through GI wires. The works shall include labelling, tagging using SS plates, glanding and fe rruling at both field and panel side. Installation to be done as per OEMs recommendations, vendor drawings and other approved drawi ngs. The scope also shall include Calibration of instruments, hydro-testing of Impulse tube, providing assistance in testing and com missioning of the instruments to control system vendor along with loop checking etc.
-
-
-
... More
Flexible Pipe :
-
-
-
... More
Reflective radium sticker printing (background sticker) and apply including pasting and fixing with supply of all manpower, equipmen ts, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instruction of E IC/ Site Engineer to complete work in all respects.
100
187974
-
... More
6" WNRF 150#, ASME B16.5
66
130449
-
... More
FLOW METER INSTALLATION - Taking delivery, shifting to installation site within the station premises, erecting and installing of the flow meter along with reducers and flow meter electronics/ flow transmitter. Providing assistance to control system vendor/meter su pplier in testing and commissioning of the turbine/ ultrasonic / coriolis mass flow meter / clamp on ultrasonic ete etc.. Making str uctural supports and fittings, clamps, screws, nuts, bolts, making the cable supports and terminating cables at panel and field ends . Mounting the junction boxes as per drawings,manufacturer's instructions, specification and direction/instruction of engineer in-ch arge/site engineer. Job shall include termination of cables at both fiels ends and control panel ends, supply of suitable size non-f lame proof cable glands at control panel and the cost of all labour, tools, materials, etc. including labelling, tagging using SS pl ates painting, glanding, ferruling complete in all respect.
8
213238
-
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm
10
67591
-
... More
FLP/ WP Junction Box, Type D. (Nos. of terminals: 24 Nos.; Bottom entry: 1 No. - 1"; Left side entry: 3 Nos.- 1/2"; Right side entry : 3 Nos.- 1/2") along with FLP cable glands & FLP plugs for all the cable entries of the Junction as per technical specifications.
19
87362
-
... More
MASONRY WORK :
-
-
-
... More
4"x2" 600# Unequal Tee
12
18592
-
... More
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, b uffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts comple te, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of require d size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note : For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, f asteners etc.]
300
229639
-
... More
Corrosion Coupon: TOR fitting complete with Caps, Plugs, O-Rings, Nipple & 2" 600# full bore threaded ball valve.
8
195030
-
... More
Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange
20
128053
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
379
4691677
-
... More
Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia. double threaded 6.8 Grade (Yield Strength 480 N/sq.mm.), counter sunk head, comprising of 10 m dia. Polyamide PA 6 Grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per the directions of Engineer-in-Charge :
-
-
-
... More
C Composite
-
-
-
... More
HDD INSTALLATION (Carrier Pipe with OFC) #Design, detailed engineering & installation of pipeline / pipeline & OFC conduit across rivers, NH, SH, Expressways, Railways, etc by HDD method. #Complete work for the crossing (between the limits, as indicated in the approved drawings) including mobilization & de-mobilization at site(s), supply of all materials as per the `Scope of Supply' and all consumables, equipment, manpower & other resources and arranging the required land for site preparations and execution of, but not limited to, the following works in accordance with the specifications, drawings and as per all provisions of the contract document and instructions of the Owner. #Interpretation of data of hydrological / geo-technical surveys furnished by the Owner, carrying out fresh topographic survey of the rivers, NH, SH, Expressways, Railways, etc & developing new profile drawing for the crossing location, carrying out additional surveys required for collecting data relevant to design and construction of the crossing, performing all engineering & design calculations, preparation of all necessary construction drawings for approval of the Owner as per the provisions of contract document, preparation of detailed construction method statement and design analysis. #Taking delivery and transportation of Owner-supplied 3LPE coated pipes to the work site from designated stockpile location, inspection of the coated pipes visually and/or with holiday detector for defects, including arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position. #Complete site preparation including arranging of required land, setting up of fabrication yard, preparation of temporary arrangement for pipeline stringing, launching etc. #Carrying out repair of pipe defects, replacement in the case of non-repairable defects and repairing damages to pipe coating including defects/ damages occurring during transportation and handling. #Pre-construction surveys and collection of all necessary data. #String preparation including repair of pipe and pipe coating defects, welding, non-destructive testing of welds including 100% radiography (by X-ray), supply of films & all equipment and providing all facilities to Owner's representative(s) for examining radiographs, repair of defects in the.........Continued
-
-
-
... More
1:2:4 [1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sour ces]
1
9705
-
... More
2"x1" x Concentric Reducerx 600#
10
7894
-
... More
Supply of permanently-lubricated HDPE pipe of 40 mm OD (as per TEC GR) with minimum pressure rating of 8Kg/cm2 and wall thickness of 4.0mm, along with duct accessories such as couplers, end caps, end sealing plugs, warning tape etc. as per specifications.
16
1205016
-
... More
"LT Panel - Erection, installation including transportation from owner desginated location, testing and commissioning of 415 V, own er supplied power-control- centres, motor control centres, soft starters, APFC panel etc. assembling as required, installation on th e already made foundation channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming p ower & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and di rections of the Site Engineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect includin g termination of all power, control cables, installation of thermistor controller, internal wiring, earthing of LT panels, supply of cable glands etc.complete as per cable schedule, drawings etc.: Weight of unit above 3000 kg but upto and including 6000 kg "
10500
1521244
-
... More
Bend- 87.5 Degrees (110 mm)
12
2072
-
... More
6", 150#, GATE/ BALL, MOV/HOV,F/F
26
280568
-
... More
EARTHING PLATE: Supply & Installation of G.I. earthing plate as per standard drawing outside the buildings. The item also includes g routing of the plate as shown in the drawing. The item should be complete in all respect including all materials, tools, tackels etc . and as per direction of EIC / Site engineer.
30
55171
-
... More
Swan neck lighting pole with LED well glass light: Supply, installation, testing and commissioning of swan neck lighting pole of 10 0mm nominal Diameter B class MS pipe (Height of bottom of light fitting shall be 5 meters from FGL), having base Plate 200mmx200mmx5 mm along with Flameproof and Weatherproof 2x18W LED well glass light fitting complete with lamp and builtin control gear and choke of approved make, including supply and installation of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting po le shall made up be of 50mm diameter GI pipe (radius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 0 2 coats of aluminium paint. The job shall also include supply and installation of 4 way Flameproof/weather proof junction box (with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and sup ply and termination of 3C X 2.5 sq. mm. armoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all re spects as per specifications, drawings and instructions of EIC / Site engineer.
6
184782
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
2
3529
-
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm
10
55458
-
... More
301 - 500 METERS (with OFC conduit)
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and s hade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour an d texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matc hing pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels :
-
-
-
... More
"Providing & Laying Concrete sheathing on the carrier pipe i.e., continuous concrete coating (mix 1:1.5:3) using specified (approved ) wire mesh reinforcement as per approved drawing and technical specifications, including supply of cement, steel wire mesh, aggrega te, sand, shuttering and all other materials, consumables, inputs, equipment for concrete sheathing required to complete the job, te sting of concrete coated pipes etc. and as per direction of Engineer-in-Charge. NOTE: I) Payment shall be made for the actual length of pipe coated with concrete. Ends of pipe left uncoated/ shall not be considered in the concrete coating length II) The rates shall include compensation for additional hardship caused in handling and/ or lowering the pipe with concrete coating. The above item shall be executed at the discretion and directions of Engineer-in-Charge. III) The rates shall include the concrete sheathing / coating over weld joints in order to arrive at continuously concrete coated pi peline. This weld joint concrete sheathing / coating shall be applied after the hydrostatic pre-test."
-
-
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Flameproof Type E (With Ingress Protection IP:55) as per specification
8
439410
-
... More
Underground Process Piping :Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners f rom designated location within station premises transporting the same to site, fabrication and erection of underground piping includ ing cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specific dept hs as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees , concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line ins truments etc.,Cleaning exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equipment and valves etc. by sand blasti ng or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying singl e layer polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials,Equipment et c, holiday detection of the coating, cleaning of coated pipes by water flushing after cleaning by compresed air,hydrostatic testing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and dispo sal of water and surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (o ther than those specifically undertaken to be supplied by the owner under the contract) and completing the work in all respects in a ccordance with the drawings, specifications and instructions of the Site Engineer / EIC. In case of 3LPE coated pipes, weld joints s hall be PU coated. Note: 1. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD. 2. Payment for external PU/ epoxy coating shall be done separately as per relevant SOR item.
-
-
-
... More
"Conducting AC interference survey, to detect presence of any AC voltage(induced owing to proximity of any HT transmission line (33 KV and above) crossing or running parallel within a distance of 60 M from the pipeline alignment as per approved procedure. The wor k shall be completed in all respects including survey, data logging for specified period, recommending mitigation measures & post mi tigation survey. The work includes all tools, tackles, consumables etc. all complete, required for survey / test as deemed necessary and as per the directions of the site engineer / Engineer-in-Charge. Note : AC interference survey shall be done at respective TLP by connecting data logger to maintain record for minimum 24 hours. The data to be submitted for each such TLP alongwith coloured graph and recommendations.AC interference survey"
16
234072
-
... More
Supply of high mast tower as per technical specification enclosed IOCL-PL-ELEC-HMT-1.0. The job includes supply of (1) 30 M high mas t structure with lantern carriage with raising/lowering mechanism by FLP motor, min. steel plates sheet thickness shall be 5 mm (2) LED flood light fixtures & lamps- 350 W (120 Lumens/W min. efficiency) - 12 nos. & LED Aviation obstruction lights - 02 nos. (3) Lig htning arrestor-1200 mm length finial (4) FLP feeder pillar board with cables from feeder pillar to base compartment of high mast (5 ) Foundation bolts. The vendor will submit the foundation design based on soil strata (soil report shall be provided by IOCL) of lo cations. Further vendor shall provide supervision for testing & commissioning of high MastHigh Mast Shaft with cables, FLP/WP motor, cables and accessories - For 20 M Height
2
830269
-
... More
DENSITY INDICATOR INSTALLATION - Taking delivery and shifting to site within distance of 500 m, installation and testing of Density Indicator, including fabrication and erection of all installation structure such as mounting stand, canopy etc, termination of cable s at both ends after loop testing as per the drawings and directions of site engineer.
2
17480
-
... More
8.625"
1
211019
-
... More
Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.
58
18304
-
... More
INSTALLATION OF JUNCTION BOX/ PUSH BUTTON STATION - for MOV/ROSOV: Installation of non-flame proof junction box, explosion proof / flame proof junction boxes, Push button stations for MOV/ROSOV for marshalling of control cables, terminating the cables at field a nd control panel end, mounting the junction boxes/Push button station, connecting to earthing grid by supplying and installing all t he required materials such as supporting structure, canopy, cable gland hood, cement concrete, painting, GI wire etc. (excluding sup ply of the Junction Boxes/Push button station) in all respects complete as per specifications, drawings and direction of site Engine er including supply of suitable size non-flame proof cable glands at Control Panel end and the cost of labour,tools, materials, glan ding, ferruling etc. complete in all respects.
56
390789
-
... More
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document:
-
-
-
... More
Sump Pump Installation: Taking delivery of the pumping units with electrical motors from designated location within station premises, shifting/transporting to site, placing over Sump Tank Nozzle, assembling together all sub-assemblies, alignment, grouting, levelling, checking, providing assistance for taking trial run of electrical motor on no-load, coupling the pump & motor, carrying out the trial run of the complete unit, testing, making final alignment and complete work in all respects in accordance with the relevant drawings, manufacturer's installation instruction, specifications and instructions of Site Engineer / EIC. Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment
12
553811
-
... More
Supplying, providing and filling Soft Soil in trenches in hard rocky stretches (excluding additional 150mm deep rock trenching) around mainline pipe for providing a minimum padding thickness of 150mm on top as well as at bottom of the mainline pipe. In all cases where rock or gravel or moorum or hard soil is encountered in the bottom of the trench, trench padding, Rock Shield Materials and sand/soft soil bags as approved by OWNER/Engineer-in-Charge, shall be provided to safeguard the pipe coating. Padding materials shall be graded soil/other suitable material containing no gravel, rock, or lumps of hard soil. The graded soil for padding shall pass through sieve size ASTM-10 or ISO-2.00. Acceptable padding shall be placed under the pipeline before its installation and around it after installation, to establish at both sides and on top of the pipe a permanent layer of padding. The thickness of compacted padding shall be at least 150mm. The trench shall be deeper by at least 150mm. The trench shall be evenly and sufficiently padded to keep the pipe, when in place, at least 150mm above the bottom of excavated trench. NOTE: (i) Item to be operated under specific instructions from Engineer-in-Charge (ii) Cost of additional depth of 150mm trenching for this item shall be paid separetly under item for "Extra for Rock trenching" Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
100
72334
-
... More
Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE fo r reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 Kg /metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, sca les, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fas teners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.
75
254487
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
32
4681
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
25 mm nominal dia pipes
10
7475
-
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: Supply and installation of 11/6.6 KV Discharge Rod
2
20750
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
392
4024674
-
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 32 mm
500
108695
-
... More
4"x ANSI 150# HOV F/F API 6D Ball
2
107302
-
... More
1" to 1/2" Reducers
15
4504
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: Copper cable as per specifications - 1 00 Sq.mm
220
531299
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
1
8892
-
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 2 light points controlled by 1 switch
10
18227
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete :
-
-
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.
5
337
-
... More
SS Connector 1/2" FNPT x 1/2" OD Tube as per tender specifications
45
9802
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
200
162101
-
... More
KILOMETER POST
20
181720
-
... More
Supply of all materials necessary for fabrication and installation of kilometre posts, direction markers and warning signs at the lo cations as per specifications, excavating & grouting in cement concrete 1:3:6, and all other works necessary for fabrication & insta llation of the markers including cleaning, priming & applying two coats of coal tar based epoxy paint on underground portions, suppl y and application of one coat of primer and two coats of epoxy paint of approved colour and quality on overground portion, stencil l etter cutting for number, direction, chainage etc. and restoration of site to original condition and all other acts, deeds, matters and things and work, labour, inputs and materials/ consumables necessary to perform and complete the work in all respects as per app roved drawing & specifications and as per direction of Site Engineer / Engineer-in-Charge.
-
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0037 or approved equivelent)
1
2033
-
... More
Fog Nozzle
5
38886
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
1
33626
-
... More
Installation of wall mounted Fibre Termination Box (FTB) as per tender specifications and directions of Engineer-in-charge/ Site Engineer
6
53645
-
... More
Supply of Pressure Indicators (PI) of the following ranges as per the technical specifications attached in the Tender.
-
-
-
... More
8.625" in Normal Soil
620
6613664
-
... More
Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 c m thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by Engineer-in-Charge complete in all respects inclusive of cost of all labour, mate rials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
1008
218274
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Heavy Duty Protective Cover
4
51422
-
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous b inder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of the Engineer-in-Charge :
-
-
-
... More
Fasteners for Flanges 2" x 150# (0.625" Dia. X 3.75" Length)
336
22599
-
... More
1 1/4" (5/4") Cable Glands
25
12292
-
... More
Electrical CSW Services
-
-
-
... More
50 mm nominal dia pipes
30
31592
-
... More
1" x 1" 150# x150# F/F TRV
25
445745
-
... More
Trenching for laying of HDPE in Independent trench Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.65 metres including shoring, strutting etc. (if necessary), backfilling the trench, as directed by Engineer-in-charge/ Site Engineer, including all labour and materials complete as per drawings and tender specifications
750
209745
-
... More
Fasteners for Flanges 4" x 600# (0.875" Dia. X 6.50" Length)
160
46633
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
Carrying out Nitrogen Purging of the pipeline system as per specification and direction of Engineer-in-Charge including supply of al l labour, materials, equipments, instruments, pigs, barrels etc. complete in all respects.
-
-
-
... More
All works upto plinth level
1
10638
-
... More
All works above plinth level upto floor V level
1
13039
-
... More
4.500" ODx 0.237" WT (Sch.STD) ASTM A 106 Gr B Bare Pipe
130
448388
-
... More
18" SWMG ANSI 600#
12
16722
-
... More
Power cable 3 core x 2.5 mm2 Armoured, Copper as per tender specifications
500
65490
-
... More
Preservation of entire pipeline / pipeline sections (including HDD sections) by using inhibited water with uniform inhibitor concent ration adequate for 6 (six) months preservation period as per manufacturer's recommendation including arranging water, testing of wa ter, supply of inhibitor, all equipment, manpower, consumables etc. complete as per specifications and direction of Site Engineer / Engineer-in-Charge.
-
-
-
... More
FIRE FIGHTING EQUIPMENT: Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of mater ial supply and as per technical specifications from approved vendors specified in tender document.
-
-
-
... More
3" NB Pipe Joints RT
100
96052
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Retrievable flush ER probe
4
289763
-
... More
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) :
27
57742
-
... More
Hot tapping with double stoppling, with sandwich valves with by pass arrangment for size 18" 600#: Mobilization of Equipments, Hot Tapping, stopple machine, sandwich valves, welding machine & consumables, cutter housing, stopple housing, stopple head, stopple cutter, pilot drill, cutter holder, Lock O-Ring plus plugs, LOR plus plug holder, required skilled, semiskilled, unskilled manpower, includung Supply and Delivery of hot tap and Line stopple fittings, Line Stopple Plug with scarfed nipple/ Lock O-Ring plus plugs, Hot Tap bypass fitting, Hot Tap Plug with Scarfed Nipple/Lock O-Ring, Buna N Sealing Elements, pressure equalization fittings, Sealing elements, guide bar, Blind Flanges, other tools, fixtures of required pressure rating for 2 nos. hot taps, all accessories, gaskets, fasteners etc. required to complete the job, inline with enclosed Drawing, cleaning and removal of the coating if required, Installation of the cutter housing, carrying out Hot tapping, fabrication and creation of temporary housing to housing bypass line of same size or one size lower pipe along with sandwich isolating valve at each end, stoppling, welding, radiography of weld joint etc. providing all assistance for Hot tapping, N2 testing,insertion of the stopple plug and blocking flow in the pipeline section, Fabrication and laying of bypass line, installation of gas bags, installation of LOR plus plug, testing, air bleeding and filling the section with product, Clearing the area, machines, tools and tackles etc., completing the work in all respect with all materials, consumables, tools, tackles, labour etc. to restore normal operation in line with specification of hot tapping given including all material complete under close supervision and as per the direction of the Site-Engineer / Engineer-in-charge and as per specification. The rates are inclusive of all manpower, equipent, tools & tackles, consumable etc required to complete the job as per scope of work. Fabrication of by-pass arrangement is under the scope of contractor. Only 18" OD pipe of required length will be provided by IOCL for creating housing to housing bypass line and all other items/ consumables are in contractor's scope of supply. Note : 1. The rates are exclusive of cold cutting of mainline & hookup work. 2. Cold cutting of mainline will be paid as per relevant SOR. 3. Hook-up with mainline will be paid as per relevant SOR item for fabrication and erection of underground piping of size 18" OD. 4. Radiography of Hook up joints with mainline will be paid as relevant SOR item for 18" OD
1
10189505
-
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
2
3910
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 30 mm and upto 40 mm
8600
1121049
-
... More
All works above plinth level upto floor V level
1
12505
-
... More
Up to 5 mm depth and 5 mm width
90
14976
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
2
18060
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or e quivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Ca t No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with spe cials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and bracket s, cutting and making good the walls and floors wherever required :
-
-
-
... More
8.625" OD
40
642392
-
... More
Fasteners for Flanges 6" x 150# (0.750" Dia. X 4.50" Length)
528
53581
-
... More
SS TUBE 1/2" OD (M) as per tender specifications
170
66671
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Transmitter (intrinsically safe) as per specif ication including 5 m suitable cable for connection with ER probe.
4
1385850
-
... More
CONCRETE WORK :
-
-
-
... More
Providing and installing RCC (1:1.5:3) boundary pillars as per drawings on both edges of the ROW at 250 metres interval and at every turning point and/or as directed, including supply of all materials necessary for the fabrication of the pillars, casting and inscr ibing the pillars, excavation of earth, fixing the pillars & backfilling, applying two coats of oil paint over one coat of cement ba sed primer on exposed surface and work, labour, inputs & materials/ consumables necessary to perform and complete the work in all re spect under the contract and as per directions of Site Engineer.
90
177354
-
... More
Beyond 60 cm girth upto and including 120 cm girth
15
33808
-
... More
Fasteners for Flanges 12" x 150# (0.875" Dia. X 5.50" Length)
1464
259128
-
... More
9 kg DCP Extinguisher
26
136157
-
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: Supply of fully charged CO2 fire extinguishers as per specifications (4.5 kg capacity as per IS: 2878 latest)
12
87750
-
... More
Dry Chemical Powder silliconised potassiun bicarbonate type IS marked, pack in 10Kg
20
8142
-
... More
Transportation (loading and unloading) of Owner supplied unarmoured Optical fibre cable (OFC) to various sites along Right of Way (ROW), pre laying testing of each cable drum for each fibre and taking the OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer, blowing of OFC through contractor laid HDPE, jointing / splicing of OFC, post installation testing of OFC for each fibre for each drum laid & taking OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer as per the scope, specifications and directions of Engineer-in-charge/ Site Engineer.
16
528130
-
... More
2"x ANSI 150# F/F API 6D SWING CHECK VALVE
5
56940
-
... More
32 mm diameter
2
268
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network swi tch through ceiling/wall/trench and post-laying end to end testing of cables. The job includes supply, installation & fixing of Dupl ex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch b ox/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and di rections of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc.
500
69525
-
... More
Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications an d directions of the Engineer-in-Charge.
1
3496
-
... More
2", 150#,GLOBE VALVE F/F
2
6593
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: Copper cable as per specifications - 1 0 Sq.mm
1500
338477
-
... More
Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :
-
-
-
... More
150 mm diameter
1
280
-
... More
3" WNRF 150#, ASME B16.5
20
16874
-
... More
6" NB Pipe Joints RT
450
751365
-
... More
Water thinnable cement primer
607
48440
-
... More
Grading roof for water proofing treatment with :
-
-
-
... More
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the s ub grade and disposal of surplus earth with lead up to 50 metres.
5508
1148451
-
... More
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
2
4018
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
99
824277
-
... More
Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
1947
-
... More
4.5 kg CO2 Extinguisher
8
71158
-
... More
Installation of OFC jointing kits as per drawings, specifications and directions of Engineer-in-charge/ Site Engineer
5
63383
-
... More
Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic concrete hardne r consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IR ONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specific ations and directions of the Engineer-in-Charge.
52
68161
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 20 mm and upto 30 mm
4300
448744
-
... More
Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth complete with all materials and labour as per instruction of Site Engineer/EIC. Design of foundation shall be provided by IOCL. Piling work if required as per soil strata in foundation of high mast is not covered in this scope of work and shall be taken up separately.For 20 M Height High Mast Tower
2
352236
-
... More
Safety Torch
4
19795
-
... More
Civil Stn ITC
-
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete :
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m.
2245
655917
-
... More
FLOORING :
-
-
-
... More
"Cathodic Protection Units : Erection, testing and commissioning of cathodic protection units (CPTR/CPPSM); including supply and installation of all facilities, materials etc., including fuses, all supporting structures, laying and connecting the 1100 V Grade power cable (2 runs of 1Cx25 sqmm Cu. conductor XLPE insulated Armoured Cable) from DCDB to CPPSM unit / laying and connecting the 1100 V Grade power cable (owner pr ovided 1 run of 3Cx10 sqmm Al. conductor XLPE insulated Armoured Cable) from ACDB to CPTR unit or both as required, providing earth ing arrangement. The work includes furnishing the test results by conducting all the NO LOAD and ON LOAD tests on the CP units and a djusting settings as required and testing the pipeline section for full cathodic protection for entire stretch. The job complete in all respect shall include cost of all labour, tools as per specifications and directions of the Site Engineer / Engineer-in-Charge. 230 V AC operated auto type Cathodic Protection Transformer Rectifier (CPTR) unit of rating 25 V 25 A DC with SCADA linking facility "
1
40431
-
... More
8.625" in Normal Soil
10
118000
-
... More
4-20 mA convertersSupply, installation, testing and commissioning of two separate 4-20 mA converters(0-20 mV Input, 0 to-2VDC input respectively, 2x4-20 mA Output in each converter) in pre installed TLPs at SV/IPIG/CP locations as per the approved drawings and specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engine er-In-Charge.
3
31753
-
... More
"Extra for rock trenching for Mainline laying (covered under relevant item of this SOR) as classified by the Engineer-in-Charge and performed by pneumatic tools or by drilling and blasting or by chiselling out including cost of all equipment, materials, labour, co nsumables & inputs to complete the work (excluding sand padding around mainline pipe which shall be paid separately) as per specific ations, approved procedure and instructions of Engineer-in-Charge. Note: 1.Payment shall be made for rock actually excavated at site or calculated based on the trench dimensions stipulated in the specifica tions / drawings, whichever is less. 2.Item shall be operated under specific instructions from Engineer-in-Charge. 3.Controlled Blasting operation shall be carried out only by authorized and trained / skilled manpower, as per approved procedure, a nd taking due care & precaution to adjoining property, people, livestock etc., with due approval from Engineer-in-Charge 4.Sand padding around mainline pipe shall be paid separately as per relevant item in SOR 5. Additional 150 mm depth of excavation to be carried out in rocky area (for pipe trench) to accommodate sand padding"
2300
2496880
-
... More
"Carrying out tieing-in and hook-up of mainline pipe with the HDD sections of pipeline (executed by other agency) (Optional) on eith er side of the HDD pipe section , including excavation/ trenching in all kinds of soil including rock, cutting of pipe, making field bends out of pre-tested pipes to match the site requirement, welding, carrying out 100% radiography, field joint coating, holiday d etection, repair of damaged coating, backfilling and making through the pipeline etc. complete in all respects. Note: This item shall be operated under specific instructions of Engineer-in-Charge."
-
-
-
... More
6" x 2" ANSI 150# END FUNNEL
14
594505
-
... More
Cu- Cuso4 Permanent Half cellSupply of Cu- Cuso4 Permanent Half cell with minimum 10 m length of tail cable, as per specificati ons of approved make
9
94074
-
... More
CO2 cartridge - 3.2 kg capacity for 75 kg DCP extinguisher
2
12297
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
607
92970
-
... More
"Under ground piping for Fire Water Piping (with external PU/3LPE Coating and internal epoxy coating at welding joints, fittings and flanges): Taking delivery of internal coated Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from de signated location within station premises, transporting the same to site, fabrication and erection of underground piping including c utting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, con centric/ eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, ther mowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line instrum ents etc.,Cleaning exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equipment and valves etc. by sand blasting o r with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying 100% solv ent free elastomeric plyurethane (PU)/ liquid epoxy on external surface, with approved materials, Equipment etc, holiday detection o f the coating, cleaning of internal surface of pipes conforming to SSPC SP-10 at all location where internal coating has been distro yed due to welding and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer gl ass flake filled /Liquid epoxy / Equivalent with coating of thickness 700-1000 Microns. Internal coating shall also be done at the i nner surface of pipe ends, Flanges, pipe fittings, valves, etc so that the internal surface of piping is not directly exposed to wat er; cleaning of coated pipes by water flushing after cleaning by compresed air,hydrostatic testing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water and surpluses, provi ding all inputs such as labour, materials equipment and consumable necessary to perform the work (other than those specifically unde rtaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawings, spe cifications and instructions of the Site Engineer / EIC. Note: 1. In case of 3LPE coated pipes, weld joints shall be PU coated.Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD. 2. Payment for external PU/ epoxy coating shall be done separately as per relevant SOR item."
-
-
-
... More
2.375" ODx 0.218" WT (Sch.XS) ASTM A 106 Gr B Bare pipe
200
334884
-
... More
1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from n atural sources)
16
130389
-
... More
2 NPS (2.375" OD x 0.218"/ 0.344" WT) ASTM A106/ A333/ A53 Pipe
100
143370
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
2
3529
-
... More
450 mm diameter piles
4
9610
-
... More
Electrical Siren
1
42874
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded ston e aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal size, well ramm ed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc . complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tions of the Engineer-in-Charge.
56
45741
-
... More
INSTRUMENTATION JOBS FOR PRESSURE CONTROL VALVE / FLOW CONTROL VALVE - Testing of control valve and field electronics, including fab rication of all structural supports and fittings, termination of related cables at field, panel & MCC end, after loop testing as per vendors drawing and direction of the site engineer. Mounting of junction box if any, supply of non flame proof cable glands for pa neland MCC end. The works includes tagging, labelling, glanding andferruling at both panel and field ends.
3
82248
-
... More
Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document:
-
-
-
... More
Development of as built drawings, data sheets, system details covering all additional facilities incorporated under this project in the station and furnishing them as reference document. Additionally, electronic copy of the documents shall also be furnished in USB drives to EIC/ Site Engineer
2
646781
-
... More
Area of slab over 0.50 sqm
1
5331
-
... More
1" Cable Glands
25
7817
-
... More
6" BLRF 150#, ASME B16.5
2
3759
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level :
-
-
-
... More
18"x2" X class 3000 Weld-o-let
5
14413
-
... More
6 NPS (6.625" OD x 0.250"/ 0.280" WT) API 5L/ ASTM A106/ A333/ A53 Pipe
150
693486
-
... More
150 mm clamp
1
1981
-
... More
Ceiling fan: Ceiling fan, BEE 5 star rated, with electronic regulator & other accessories and fittings etc. of or approved make wit h 56" Sweep size
3
11929
-
... More
12.75" OD x 0.25" WT IS:3589 FE410 Pipe
600
5863656
-
... More
3" BLRF 150#,ASME B16.5
20
15741
-
... More
Universal Nozzle
5
32910
-
... More
EARTHWORK :
-
-
-
... More
Pair of Rubber hand gloves for Electrical work bearing IS mark
4
5744
-
... More
3"x2" 600# Un Equal Tee
3
4216
-
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: RUBBER HAND GLOVES: Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
2
7195
-
... More
Installation of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications, drawings and directions of Engineer-in-charge/ Site Engineer
5
18000
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete :
-
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
302
160411
-
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS:14893 including surfa ce preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and hig h skill trained personal for conducting the test & submission of results, all complete as per directions of the Engineer-in-Charge. [Note: Unit "EA" shall mean "PER TEST"]
2
2497
-
... More
Cement mortar 1:3 (1 cement : 3 coarse sand)
7
119742
-
... More
EARTHING SYSTEM SET (03 PITS): Supply, installation, testing of earthing system consisting of 3 earth pits of perforated GI pipes ea rthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover an d frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete a s per drawings, specifications and directions of the site engineer, including cost of tools, materials etc complete in all respects as per drawing The job shall also include testing of each earth pit and the entire earthing system on whole. (Note: Earthing for fie ld instruments shall be provided from Station earth grid covered in Electrical SOR.)
9
681942
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150 mm/ 230 mm/ 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive m ortar all complete as per directions of Engineer-in-Charge. [Note: The payment of RCC band and reinforcement shall be made for seper ately].
1
8828
-
... More
1" BLRF 150#,ASME B16.5
14
3287
-
... More
1" x 1" 600# x150# F/F TRV
42
890890
-
... More
Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & fl oor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackl es etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment].
173
57771
-
... More
REINFORCED CEMENT CONCRETE :
-
-
-
... More
6" BLRF 600#, ASME B16.5
2
12154
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Type DAC (With Ingress Protection IP:55)
16
564200
-
... More
1:6 (1 cement : 6 fine sand)
2187
851953
-
... More
Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per drawings, recoomendations of OEM and d irections of Engineer in-charge/ Site engineer
23
115037
-
... More
REINFORCED CEMENT CONCRETE :
-
-
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Primary Packing for Hollow Plug Assembly
4
3494
-
... More
Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid ov er and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colo ur as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and direct ions of the Engineer-in-Charge.
10
17195
-
... More
CAUTION BOARD: Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fix ing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language.
4
10208
-
... More
8.625" in Rocky Soil
460
14601320
-
... More
6", 600#, F/F,GLOBE VALVE/CONTROL VALVE/MOTORIZED GLOBE VALVE/ROV/PLUG VALVE
10
119687
-
... More
INSTALLATION OF REMOTE SEAL PT: Installation, assistance in testing and commissioning of Remote Seal Pressure Transmitter (RSPT) as per the directions of Engineer in-charge/ Site engineer and drawings.
4
127605
-
... More
2" ANSI 600# Equal Tee
10
4684
-
... More
4.5" ODx 0.237" WT ASTM A106/ ASTM A53/ API 5LGr B Pipe
50
173696
-
... More
All works upto plinth level
1
11172
-
... More
18" x 600#Insulating Coupling Erection
2
51702
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
33
85734
-
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1
2082
-
... More
Supply of Surge Arrestors of approved make including required length of cable & as per specifications for protection of insulating couplingsSpark Gap Surge Arrestor for above ground and under ground suitable for 100 kA lightening Impulse Current (10/350 micro s), rated spark over voltage = 1.25 kV in flameproof weatherproof enclosure Ex d IIC, IP 66 with connecting cable (EXFS 100 KU of D ehn or eq.)
8
121560
-
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 3 light points controlled by 1 switch
10
22499
-
... More
18", 600#/900#, SWING CHECK VALVE, F/F
1
29675
-
... More
Installation of RF iD type Electronic Markers as per tender specifications. The job includes configuration & programming of the Electronic markers to write information data as per directions of Engineer-in-charge/ Site Engineer.
5
4743
-
... More
6"x2" X 3000 Class, ASME B16.11
33
95130
-
... More
1" X 1" F/F Thermal Relief Valve
45
105934
-
... More
Supply of OFC Jointing kits as per tender specifications.
15
144803
-
... More
2 NPS (2.375" OD x 0.218"/ 0.344" WT) ASTM A106/ A333/ A53 Pipe
100
184670
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
... More
Fasteners for Flanges 18" x 600# (1.625" Dia. X 12.50" Length)
240
294811
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
863
260980
-
... More
18" NB Pipe Joints RT
80
394780
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
16
131052
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed b y the Engineer-in-Charge :
-
-
-
... More
ROAD WORK :
-
-
-
... More
4" 600# 90 deg LR Bend
20
46043
-
... More
1 NPS (1.315" OD x 0.179"/ 0.250" WT) ASTM A106/ A333/ A53 Pipe
100
169802
-
... More
Routine Test (Test Load 1.5 times the Safe Capacity) [Note: Unit "EA" shall mean "PER TEST"]
2
53392
-
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document:
-
-
-
... More
Construction of open surface drain complete as per drawing including necessary excavation, refilling, disposal of surplus earth, pro viding and laying one layer of flat brick and cement concrete 1:3:6 (150 mm thick) at bottom, lining with brick masonry in cement mo rtar 1:4 (1 cement : 4 coarse sand), plastering exposed surface with 18 mm thick cement mortar 1:4 1:4 (1 cement : 4 coarse sand) wi th a floating coat of neat cement, rounding off corners etc. complete as per specification, drawing and directions of the Engineer-i n-Charge :
-
-
-
... More
4" WNRF 150#, ASME B16.5
6
7434
-
... More
Fire Hose Box for keeping 2 Nos. of 15 M Type B delivery hose and one no. jet nozzle
20
124490
-
... More
2", 600#,GATE/ BALL, HOV,F/F
38
150348
-
... More
Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron)
220
162403
-
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
38
52079
-
... More
750mm x 750mm x depth up to 1000mm inner dimensions
15
306333
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. :
-
-
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali resisting mor tar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcations and direct ions of the Engineer-in-Charge :
-
-
-
... More
Supply of Reducers - flame proof and weather proof including EP/WP certificates:
-
-
-
... More
ROOFING & CEILING :
-
-
-
... More
12" ANSI 150# Equal Tee
8
111703
-
... More
A Supply
-
-
-
... More
Providing and fixing factory formed rainwater gutters (as per AS-2179) made of the same material used for roofing i.e. 0.45 mm BMT ( Base Metal Thickness) Hi-Tensile Steel with minimum 550 MPa Yield Strength coated with hot dip metallic zinc-aluminium alloy coating "ZINCALUM AZ-150" or equivalent (as per AS:1397), with super polyester Colorbond XRW quality paint coat as per AS/ NZS:2728 (Catego ry-3) of approved colour, having girth as per design complete in all respect with all necessary supporting straps, joining material, bolts, nuts, washers, sealing material, including cutting holes, making drop ends, funnels etc. or as directed by the Engineer-in-C harge. [Note: Measurement shall be done on as laid length].
14
21804
-
... More
Installation of Transition Pits at building entry points as per tender specifications, drawings and directions of Engineer-in-charge/ Site Engineer )
4
38373
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD above 40 mm and upto 60 mm
1250
118162
-
... More
WBM ROAD / CONCRETE BREAKING: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respec ts including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, spe cification and directions of Site Engineer / Engineer-in-Charge.
170
882022
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anc hor blocks and the like.
314
118977
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all eq uipment, tools, plants & machineries required for the job, all complete as per directions of the Engineer-in-Charge, up to 90 metre depth below ground level :
-
-
-
... More
18" 600# 90 deg LR Bend
12
233002
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.
35
14202
-
... More
415 V AC 3 phase / 230 V AC single phase motors - Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (includi ng space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power ca bles, earthing of the motor/actuator/ connecting the thermistor, installing the controller in LT panel, earthing the motor frame, ar mour etc. as per the drawings, erection manuals, and as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the required FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips , labour, tools, materials, etc., as required in all respects for all types of motors/heaters/thermistors/actuators etc.: Capacity a bove 1 KW and upto 2.5 KW
48
195020
-
... More
Supply of high mast tower as per technical specification enclosed IOCL-PL-ELEC-HMT-1.0. The job includes supply of (1) 30 M high mas t structure with lantern carriage with raising/lowering mechanism by FLP motor, min. steel plates sheet thickness shall be 5 mm (2) LED flood light fixtures & lamps- 350 W (120 Lumens/W min. efficiency) - 12 nos. & LED Aviation obstruction lights - 02 nos. (3) Lig htning arrestor-1200 mm length finial (4) FLP feeder pillar board with cables from feeder pillar to base compartment of high mast (5 ) Foundation bolts. The vendor will submit the foundation design based on soil strata (soil report shall be provided by IOCL) of lo cations. Further vendor shall provide supervision for testing & commissioning of high MastLED flood light type -350 W (12 nos.) & Av iation obstruction LED light - 02 nos.
2
994713
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.TLP type "A" , flame proof & weather proof as per specifications and drawing (W ith inbuilt provision of Voltmeter & pushbutton for PSP Measurment)
8
182694
-
... More
Supply of XLPE insulated , PVC sheathed cable, 1100 V grade conforming to IS: 7098 (P-1) as per specifications and approved makeCop per Cable size 1cx35 sq. mm Armoured
400
185477
-
... More
B Services
-
-
-
... More
INSTALLATION OF CONTROL PANEL/CONSOLE DESK/ UPS/ RIO/ RTU/ PLC/ ACDB - Taking delivery, shifting the panels to installaion site and erection, installation, testing of Control panels, mounted with all the instruments, power supply units, UPS & battery banks logic control systems , barriers, providing assistance to control system vendor for commissioning of control system including panels, cont rol/console desk etc. installation on already made foundations or fixing on walls, or steel structure or fixtures aligning, levellin g, grouting, inter-wiring outgoing, incoming cable terminations as required, earthing, testing, complete in all respects as per draw ings, specifications and directions of the engineer in-charge/site engineer, including supply of suitable size non-flame proof cable glands for all incoming/outgoing cables and the cost of the materials, tools, labour, glanding, ferruling etc. complete in all resp ects.The indicated quantity is cumulative weight of panels.
11000
495965
-
... More
450 mm dia R.C.C. pipes
98
302947
-
... More
INSTRUMENT FITTINGS
-
-
-
... More
4", 150#,GATE/ BALL, MOV/HOV, F/F
4
28777
-
... More
Designing, providing, fabricating and fixing profiled sheeting 730-1020 mm cover width, 28-30 mm crests @ 186-333 mm centre to centr e, manufactured out of 0.45 mm BMT (Base Metal Thickness) Hi-Tensile Steel (Minimum yield strength of 550 MPa) coated with hot dip m etalic galvalume/ zincalume coating AZ-150 or equivalent as per AS:1397 and super polyster XRW quality paint coat as per AS/ NZS2728 (Category-3) of approved colour for roofing, cladding, gutters, rainwater pipes, spouts etc. The total mass of the coating on both sides shall be 150 gms/sqm (Zinc 45%/ Aluminium 55%). The total paint coat thickness shall be 35 microns, comprising of 20 microns e xterior coat of super polyster XRW on top surface and 5 micron super polyester on back surface over 5 micron primer coats on both su rfaces including side and end laps. The sheets shall have wide pans with 2-3 stiffening ribs for effective water shedding and specia l male/ female ends with full return legs on side laps for purlins support and anti-capilary flute in side lap. The sheets shall be fixed using polymer coated hot dip galvanised hex head self drilling fasteners as per AS:3566 (Class-3) on each crest of sheets for connection with purlins and polymer coated hot dipped stitching fasteners at 300 mm c/c on all sides and end laps, etc. Approved sea ling tapes shall be used on side laps and end laps of sheets and closer to be provided at the last end of sheet. The measurement sha ll be based on per unit of finished/ laid area. Item to include curved sheets also wherever required. The Contractor shall give mini mum 10 year guarantee for the sheets against deterioration, disintegration, loss of lustre, variation in colour, etc. and leakages a cross laps, fasteners etc. The Contractor is to submit design and shop drawing for approval on the sheet profile, design and details before installation :
-
-
-
... More
Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document:
-
-
-
... More
Mechanical CSW Composite
-
-
-
... More
8.625"
22
199372
-
... More
Providing and fixing in position pre-moulded joint filler in expansion joints. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH"].
4313
17761
-
... More
18" BLRF 600#, ASME B16.5
2
146721
-
... More
HDD INSTALLATION (Carrier Pipe without OFC Conduit) FROM 301 TO 500 METERS
-
-
-
... More
FINISHING :
-
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete :
-
-
-
... More
8.625"
300
2998380
-
... More
4" x 150# WNRF Flange Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290
15
262968
-
... More
Conducting " Coating-Resistance Survey" for calculation of specific coating resistance of the pipeline in ohms.sq.m. along the entir e pipeline and submitting the report in hard as well as soft copy as per Specification / approved procedure and directions of Site E ngineer / Engineer-in-Charge.Coating Resistance Survey
22
42669
-
... More
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflec tivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thi ckness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly c leaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engineer-in-Charge .
173
95651
-
... More
18", 600#, BALL/GATE VALVES MOV/HOV, F/F
4
142440
-
... More
Supply of Cathodic Protection unit of approved make, complete in all respects as given in the specification with all its accessories to ensure trouble free operationManual type Cathodic Protection Transformer Rectifier (CPTR) unit with 230 V AC input & 50 V, 75 A DC output rating as per specifications
2
994495
-
... More
On steel work
5
1262
-
... More
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% ( percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
49
655999
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
Providing and laying Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in required de sign and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 1 8 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. al l complete as specified and as directed by the Engineer-in-Charge.
5
23455
-
... More
Type B Delivery Hoses of 15 M length bearing IS-636 mark
60
552027
-
... More
TANK FOUNDATION WORKS :
-
-
-
... More
"Cable Marker Supply, erection and installation of MS cable markers; including excavation,installation of the markers,cement concrete grouting, back-filling etc. required as per drawings, specifications and directions of the Site Engineer,including the cost of all ma terials, labour,tools etc. complete in all respects as per the directions of Site Engineer / Engineer-in-Charge.Cable marker "
9
10733
-
... More
Providing & making bank protection works using Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Ga bion Boxes as per IS-16014:2012, MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of +/- 2%), Zinc+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/selvedged with partitions at every 1m interval and sha ll have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm (ID/OD ), supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, including providing wooden/ steel pegs as required for supporting the protection, specifications and directions of the Site engineer/ Engineer-in-Charg e.
200
1083240
-
... More
18", 600#,BALL/GATE VALVES MOV/HOV, W/W
3
128197
-
... More
INSTALLATION OF TEMPERATURE TRANSMITTER WITH THERMOWELL: Installation and assistance in testing & commissioning of temperature eleme nts/temperature transmitter(TT) by making necessary holes on the pipes, welding the socket for thermowell on the pipe including sup ply of boss, silicon paste etc as per the directions of engineer in-charge/site engineer and drawings.
4
40813
-
... More
Development of tube well in accordance with IS:2800 (Part-I) and IS:11189, to establish maximum rate of usable water yield without s and content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and directions of the Engineer-in-Charge. [Note: Unit "H" shall mean "PER HOUR"].
30
34224
-
... More
1" ANSI 150# Equal Tee
10
2832
-
... More
Supply of electroforged, hot dip galvanised gratings comprising of structural steel items such as steel plates, bars, flats, etc, with/ without nosing after complete fabrication of various sizes suitable for steps, platforms, walkways, along with hot dip galvanised fasteners (bolts, nuts, washers) and suitable hot dip galvanised clamps as per drawings, specifications and instructions of EIC/ Site Engineer. The item includes erection, installation, bolting of the supplied gratings including supply of all other inputs such as labour, materials, tools and tackles, consumables, etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer/ EIC.
20
4650993
-
... More
Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
3
157961
-
... More
FLP/ WP Emergency Shut Down Push Button Switch (with 2 nos. cable entry provision of 1/2" NPT) with steel hammer chained with main unit.
8
22586
-
... More
Coupler (110 mm)
6
940
-
... More
3" SWMG ANSI 150#
20
3587
-
... More
Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Aurmoured/Unarmoured Optical Fibre Cable in HDPE pipe,jointing & splicing of OFC, carrying out end to end testing of laid Optical fibre cables by taking OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and installation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom Works Contractor and providing necessary assistance/ support to the Telecom Works Contractor in commissioning of Local Area Network.
1000
266680
-
... More
Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
90
1902254
-
... More
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 20 Pair capacity with mounting arrangement as per specifications
1
5301
-
... More
Cement mortar 1:3 (1 cement :3 coarse sand)
1
1272
-
... More
Supplying, providing and filling fine sand in trenches in stretches other than normal soil and hard rock / boulder stretch (including additional 150mm deep trenching) around mainline pipe for providing a minimum padding thickness of 150 mm on top as well as at bottom of the mainline pipe for the complete specified trench width NOTE: (i) Item to be operated under specific instructions from Engineer-in-Charge (ii) Cost of additional depth of 150mm trenching for this item shall be included in this item itself Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
110
109032
-
... More
Installation of MS Sump Tank 10KL capacity: Taking delivery of Sump tank from designated godown / stockpile, shifting/transporting w ithin station premises, placing on pre-constructed foundation, installation of auxiliary mountings and fittings, dressing and making good of the foundation, grouting, cleaning and flushing with water, draining, testing, completing the work in all respects in accor dance with the relevant drawings, manufacturer's installation instruction, specifications and instructions of Site Engineer / EIC (F oundation work shall be paid separately under relevant items of Civil works).
4
174732
-
... More
Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside dimension). The brick masonary chamber shall be constructed with common burnt clay F.P. S. (Non-modular) bricks of class designation 7.5. [Note: Weight of the cover shall not less than 4.50 kg and weight of the frame sha ll not be less than 2.70 kg as per standard design] :
-
-
-
... More
Safety Helmet
25
11092
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
636
6529828
-
... More
Size of Tile 500x500 mm
10
16864
-
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accord ance with applicable specifications.
204
164799
-
... More
With float glass panes of 5.50 mm thickness
44
75877
-
... More
Supply and delivery of End Funnels at respective stations as per Station wise Break up of material supply and as per technical speci fications from approved vendors specified in tender document
-
-
-
... More
Supply of 89 mm OD, Schedule 80, API 5L Grade-B/ ASTM A106 MS pipe for cable conduit as per tender specifications
2237
4289447
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
3589
2908908
-
... More
Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
10
12365
-
... More
Lighting Distribution Board / AC Distribution Board - Supply , installation, testing and commissioning of TPN lighting / AC Distribu tion board of approved make, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conf orm to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings: Type IV DIstribution Board: Doubl e Door Translucent Euro DB of Havells or approved make, having 100 A TPN Copper Bus bar, 1x63 A TPN MCB , 1x63 A RCCB (100 mA Sensit ivity), 9x6A SP MCB & 6x20 A SP MCB as per specification
2
196394
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cemen t: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and poli shing complete.
11
26485
-
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instruc tions of the Engineer-in-Charge]
10771
926797
-
... More
Civil Stn Non ITC
-
-
-
... More
3" x 2" ANSI 150# Un Equal Tee
44
37122
-
... More
4" SWMG ANSI 600#
20
9510
-
... More
6.8 kg CO2 Extinguisher
4
43164
-
... More
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
1
2673
-
... More
4" BLRF 600#,ASME B16.5
2
5678
-
... More
Providing and fixing ceramic glazed floor tiles of first quality conforming to IS:15622 (thickness to be specified by the manufactur er) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge i n skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cem ent slurry @ 3.3 Kg/sq.m. including pointing in white cement mixed with pigment of matching shade complete.
20
24686
-
... More
Electrical CP Supply
-
-
-
... More
6" WNRF 600#, ASME B16.5
92
1055963
-
... More
Single pile up to 50 tonne Safe Capacity :
-
-
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all eq uipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & up to 150 metre depth below ground level :
-
-
-
... More
3"x ANSI 600# HOV F/F API 6D Ball
2
79385
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
... More
INSTALLATION OF FLOW SWITCH: Installation and testing of Flow switch. This includes mounting of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site Engineer.
6
47807
-
... More
Cement concrete prepared with batch mixing machine
413
4808398
-
... More
2" NB Pipe Joints RT
200
154108
-
... More
"Conducting Direct Current Voltage Gradient Survey over the buried line, logging all measurements, to identify / pin point the coat ing defects on pipeline including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications and approved procedures, identification of areas/locations where coating repair is required alongwith suggestion for remedial measures etc. inclu ding the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the survey results in the graphical as well as tabular forms computerised colour print and compl ete in all respects as per directions of Site Engineer / Engineer-in-Charge. Note : The item includes establishing the coating defect at specified locations by excavation in coordination with mainline contract or, who will arrange to repair the defects.Direct Current Voltage Gradient Survey"
22
122313
-
... More
Providing and laying Burnt Terracota Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations lai d over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and d irections of the Engineer-in-Charge.
10
22659
-
... More
8.625"
660
1970364
-
... More
4" BLRF 150#,ASME B16.5
2
2395
-
... More
"Final Commisioning of CP system Final Commissioning of the impressed current cathodic protection system for the mainline for achieving full protection as per protec tion criteria as mentioned in the specifictions through repeated adjustments of the CP units after installation of galvanic anodes f or hot spot protection and mitigation of AC/ DC interference, if any and submission of the resultant data to the owner and testing, measuring, recording and submitting all these data once again after the lapse of a period as per specifications / directions of the Site engineer / Engineer-in-Charge, including the cost of all labour tools and materials as required, complete in all respect.Commis sioning of Mainline CP system"
1
133469
-
... More
Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, special back-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. Zinc Anode
72
727798
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specifications attached in the Tender.
10
58283
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge]
2
6743
-
... More
6" SWMG ANSI 600#
92
65570
-
... More
Supply of XLPE insulated , PVC sheathed cable, 1100 V grade conforming to IS: 7098 (P-1) as per specifications and approved makeCop per Cable size 2cx25 sq.mm Armoured
100
65199
-
... More
Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
270
4128737
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for separately] :
-
-
-
... More
2" WNRF 150#, ASME B16.5
84
49163
-
... More
Providing and fixing Unplasticised PVC (uPVC) pipe clips (110 mm) of approved design to unplasticised-PVC rainwater pipes by means o f 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
24
9220
-
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 1 light point controlled by 1 switch
10
14844
-
... More
Providing and laying 10 mm thick white ceramic tiles over 15 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) mixed with water proofing compound finished neat etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as p er drawings, specifications and directions of the Engineer-in-Charge.
10
21325
-
... More
6.625" ODx 0.280" WT (Sch.STD) ASTM A 106 Gr B Bare Pipe
100
507754
-
... More
Red & Green flag (Pairs) 2 nos in each colour
4
7282
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Type B (Flameproof & Weatherproof as per specifications & drawing) (With inbuil t provision of Voltmeter & pushbutton for PSP Measurment)
4
241611
-
... More
Supply of 20 Pair Armoured PIJF Underground Telephone Cable as per specifications
200
39176
-
... More
Laying cased crossings, by auger boring & jacking method / Horizontal Directional Drilling (HDD) method using casing pipes and 3LPE coated carrier pipes according to drawings/ specification(s) and providing all works, labour, inputs and materials/ consumables necessary to perform and complete the works in all respect in accordance with the contract, taking delivery and transportation of Owner-supplied 3LPE coated pipes and bare casing pipes to the work site from designated stockpile location, inspection of the coated pipes visually and/or with holiday detector for defects, arranging all necessary intermediate storage area required thereof till the pipes are installed in permanent position, setting out the works, aligning and welding the casing and carrier pipes, 100% radiography of weld joints of carrier pipes, field joint coating, holiday detection & repair of coating, applying a layer of Poly-Urethane Coating of min. thickness 1000 microns over a coat of suitable primer to external surface of casing pipe,and two component epoxy coating of min. thickness 600 microns for internal surface of casing pipe, excavating/ trenching and / or drilling/ boring in all kinds of soil including rocky strata, inserting the casing pipe into the bore, pre-hydrostatic testing of the carrier pipe and replacement / rectification of defects / pipes, installation of HDPE insulators on the carrier pipe, carefully inserting the carrier pipe inside casing pipe by jacking/ pushing method taking care not to damage the insulator and coated carrier pipe, sealing the ends of the casing pipe, as per procedure given in specifications, with heat shrinkable wraparound type end seal of approved make, fixing of vent pipes at the ends of the casing pipe, priming and applying two coats of coal tar based epoxy paint on underground portion of vent pipes, measuring final resistance between carrier pipe and casing, and doing preparation work necessary to produce correct resistance, applying one coat of primer and two coats of epoxy paint to all exposed and overground fittings & piping, proper compaction of backfill below carrier pipe at either ends, independently supporting the carrier pipe outside each end of the casing pipe by suitable RCC supports on firm base with neoprene rubber sheet below carrier pipe and strengthening with sand bags and proper compaction of earth below pipe, to prevent settlement of carrier pipe and damage to insulators, final clean-up and restoration of the site and disposal of wastes and surplus in accordance with the contract and supply of all materials (other than those specifically undertaken to be supplied by the Owner under contract) necessary for or in the performance of the work or for temporary or permanent incorporation in the works, and all other acts, matters and things necessary to make the pipeline ready for commissioning in all respects. NOTE: 1. The work of cased crossing will include the provision of temporary supports for existing installations in the road and/or railroads, the provision of diversions, the restoration of the railroad/ embankment to its original state, maintenance for subsidence and all other precaution(s), work(s) and/or maintenance expressed or implied in the contract. 2. The work will also include providing necessary independent support to carrier pipe outside each end of casing pipe by suitable RCC supports, proper compaction of backfill below carrier pipe at either ends and strengthening with sand bags and/ or other suitable means so as to prevent differential settlement of the casing pipe and damage to insulators, including all labour, materials etc. as per direction of Site Engineer/ Engineer-in-Charge. 3. All materials (other than the Owner-supplied materials) required for performance of the work shall be supplied by the Contractor at his own cost. 4. Casing end seal shall be of approved type only and shall be installed by skilled personnel as per approved procedure and demonstration by manufacturer's representative (to be arranged by mainline contractor) 5. Carrier pipe to be brought to the desired level of crossing by providing natural gradient to trench botom from sufficient distance and avoiding field bends so as to keep provision for any future widening of Railway/ Highway. 6. Casing insulators (made of HDPE) shall be interlocking type, free from metallic nuts & bolts
-
-
-
... More
8.625"
2000
660800
-
... More
Providing and fixing toilet paper holder :
-
-
-
... More
8", 600# GATE/ BALL, MOV/HOV, F/F
4
63309
-
... More
"Cathodic Protection Units :Cathodic Protection Units : Erection, testing and commissioning of cathodic protection units (CPTR/CPPSM); including supply and installation of all facilities, materials etc., including fuses, all supporting structures, laying and connecting the 1100 V Grade power cable (2 runs of 1Cx25 sqmm Cu. conductor XLPE insulated Armoured Cable) from DCDB to CPPSM unit / laying and connecting the 1100 V Grade power cable (owner pr ovided 1 run of 3Cx10 sqmm Al. conductor XLPE insulated Armoured Cable) from ACDB to CPTR unit or both as required, providing earth ing arrangement. The work includes furnishing the test results by conducting all the NO LOAD and ON LOAD tests on the CP units and a djusting settings as required and testing the pipeline section for full cathodic protection for entire stretch. The job complete in all respect shall include cost of all labour, tools as per specifications and directions of the Site Engineer / Engineer-in-Charge. "
-
-
-
... More
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S .458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jo inting of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete i n all respects as per specifications, drawing and the direction of the EIC/Site Engineer: 300 mm dia
100
313937
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
8
25673
-
... More
Providing barricading of 3.0 m height made of 1mm thick G.S. corrugated sheet with steel angle post (ISA65x65x6) at every 1.5 m inte rval and steel angle bracings (ISA 50x50x6) at every 3.0m interval, embeding posts in cement concrete (1:2:4) padestals of size 450m m x 450mm x 750mm), providing necessary bolts, nuts, fixing, etc. including painting of steel sheet and angles with two coats of alu minium/ synthetic enamel paint over a coat of red oxide zinc chrome primer, inclusive of cost of all labour, material, tools, tackle s, etc. complete in all respects as per drawing, specifications and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific approval of the Engineer-in-Charge].
30
93362
-
... More
Electrical CSW Composite
-
-
-
... More
Pipe to Soil potential ReadingsPipe to Soil potential Readings : Measurement, recording and submission of Pipe to Soil Potential rea dings by connecting / disconnecting the Mg anodes (for achieving optimal protection through TLPs) along the entire pipeline and at s tations, including preparing and submiting relative PSP profile and other relevant data pertaining to the cathodic protection of the pipeline, including cost of all labour, instruments and services rendered. The readings shall be furnished as per the specification s and as per the directions of the Site Engineer/Engineer-in-Charge
22
11340
-
... More
CONCRETE WORK :
-
-
-
... More
150 mm nominal size diameter
20
19850
-
... More
6" 600# Equal Tee
16
88037
-
... More
Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per sp ecification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynami c method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-in-Charge.] :
-
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
490
1273022
-
... More
INSTRUMENT FITTINGS
-
-
-
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover (Ref. Make: SINTEX or approved equival ent), conforming to ISI:12701, colour of opaque white or as approved by the Engineer-in-Charge. The rate includes making necessary h oles for inlet, outlet & overflow pipes. The base support including fittings & fixtures for tank shall be paid separately.
10
117
-
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
4257
1287361
-
... More
Supplying, providing, installation, testing & commissioning of sub-mersible pump-cum-motor of approved make capable of delivering 30 0 Litre Per Minute (LPM) to required head with starter, wiring from starter to motor and incoming feeder to starter including pipe w ith all attachment complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as per drawings, specif ications and directions of the Engineer-in-Charge :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
60489
6718718
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 37 mm
200
140705
-
... More
Rocky strata including boulders :
-
-
-
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, la bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :
-
-
-
... More
Fasteners for Flanges 6" x 600# (1.000" Dia. X 7.50" Length)
1104
310047
-
... More
6" 600# 90 deg LR Bend
44
226423
-
... More
2"x ANSI 150#, F/F, API 623/ BS-1873 GLOBE Valve
3
22758
-
... More
2"x ANSI 600# F/F API 6D SWING CHECK VALVE
6
170918
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 40 Kg / Cm2 as per the technical specifications attached in the Tender.
5
33394
-
... More
Hand Operated siren
5
95432
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thi ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
93
1036224
-
... More
Mechanical CSW Supply
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 25 mm
345
186512
-
... More
HDD INSTALLATION (Carrier Pipe without OFC Conduit) FROM 501 TO 750 METERS
-
-
-
... More
Jet Nozzles
30
156963
-
... More
Exhaust fan - Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greav es or of approved make fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and conne cting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications , drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.18" Sweep
4
47496
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
2645
3112922
-
... More
8" BLRF 600#, ASME B16.5
2
19288
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Flameproof Type DMV (With Ingress Protection IP:55) as per specification
4
192820
-
... More
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
1
12451
-
... More
Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron)
187
115594
-
... More
Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 c m thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by Engineer-in-Charge complete in all respects inclusive of cost of all labour, mate rials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
1006
217841
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dump ing ground within 50 metres lead.
10
518
-
... More
Supplying steel structural items at site such as joists, tubes, pipes, channels, angles, beams, plates, flats, square/ rectangular h ollow sections, bars, MS gratings, chequered plates, C.I. Rollers, bolts & nuts, washers, grouting/ foundation bolts, etc., fabricat ion and erection/fixing of structures such as saddle supports, pipe supports, valve supports, platforms, walkways, stairways, crosso vers, struts, chain link fencing posts, gate, collapsible gate, ladders, safety grills, signboards, supports for cable trench, cable racks, cable tray support, push button control posts, supporting structures etc. as per drawing including drilling holes, making sl ots for barbed line, wire hoisting, placing in position, embedding in concrete etc. including surface preparation using abrasive bla st cleaning or power tools cleaning, priming and painting the finished structure by applying one coat of High Build Epoxy Zinc Phosp hate Primer (min. 50 µm), one coat of Self-primed, surface tolerant, High build Epoxy mastic (min. 150 µm) and one finish coat of Is ocyanate Aliphatic Poly-Urethane(PU) Finish Paint (min. 50 µm) (Total DFT: 250 µm), including supply of all inputs such as labour, m aterials, consumables, tools and tackles, welding electrodes, paints of approved make as per vendor list in the tender, cutting to r equired size welding of joints, fixing anchor plates, bolts, threading, nuts, washers, sleeves etc. and necessary lettering of appro ved pattern on main gate, signboards etc. necessary to perform and complete the work in all respect, in accordance with drawings, sp ecifications and instructions of the Site Engineer/ EIC. Note: This item is excluding the cost of concrete work.
65
8963929
-
... More
1" SWMG ANSI 150#
14
1007
-
... More
Foam Branch pipe
5
41305
-
... More
Wall mounted fan: 12" Oscillating wall mounted bracket fan, noiseless, plastic moulded construction, rotary device for 3 step speed control integrated unit of approved make with all accessories complete in all respect.
4
39763
-
... More
Ceiling fan wiring: Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular swi tch) including providing space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifica tions and drawings.
3
7126
-
... More
415V LT Switchboard as per specification for T Point
1
3825480
-
... More
Fasteners for Flanges 3" x 600# (0.750" Dia. X 5.50" Length)
160
22089
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
1
10944
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Receiver with Safety Barrier & 3 digit LED dis play suitable for interfacing with SCADA as per specification.
4
1349069
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
809
306538
-
... More
6"x4" x Concentric Reducer X 150#
3
3628
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
176
145891
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
Installation of OFC Joint pit markers at every joint location as per specifications, drawings and directions of Engineer-in-charge/ Site Engineer
5
7363
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (Non-modular) bri cks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cemen t : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
2" BLRF 600#,ASME B16.5
8
6239
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain w indow sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
In all kinds of soil
1727
417761
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's sp ecification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].
175
13164
-
... More
1" to 3/4" Reducers
15
5235
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat).
5
180
-
... More
2"x ANSI 600# HOV W/W API 6D Ball Valve
8
500005
-
... More
4" SWMG ANSI 150#
58
12866
-
... More
415V LT Switchboard as per specification for CUF
1
4576446
-
... More
3" WNRF 600#, ASME B16.5
20
28485
-
... More
FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) for location in zone-I gas group II A & IIB (Temp. class T3) area with a separate terminal box for incoming cable and a separate terminal box for out going cable (where applicable), apart from separate enclosure for each equipment including control gear etc. in IP 65 cast aluminium LM-6 certified en closure: FLAMEPROOF TUBELIGHT, 2x22Watt, LED, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079-2007
4
47992
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
30
249780
-
... More
"Piping Modification: Carrying out modification in already fabricated and/ or erected pipe due to change in drawing or as required by site condition, tak ing delivery of pipe, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within statio n premises, transporting the same to site, cutting of pipe and / or weld joint , edge preparation, bending, lining up, welding and i nstalling pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pip e line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under take n by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instruc tions of Site Engineer / EIC. (Item is to be operated upon approval of SIte Enginner, Item covers only modification / rework jobs.) Payment as per actual inch-dia. (ID) welding"
-
-
-
... More
SS Connector 1/2" MNPT x 1/2" OD Tube as per tender specifications
250
49613
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrange ments for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27. 5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top co ver of required thickness for rolling shutters :
-
-
-
... More
Fasteners for Flanges 2" x 600# (0.625" Dia. X 4.75" Length)
800
92512
-
... More
STEEL WORK :
-
-
-
... More
Casting, supplying and erecting in position precast reinforced cement concrete elements (with proper lifting lugs) for trench & drai n covers, shelves, partitions, post, slabs etc. for all leads and levels including making necessary moulds, vibrating, tamping, cur ing, finishing the top surface with cement mortar 1:3 (1 cement : 3 fine sand) to give a smooth and even surface, transportation to Site, aligning and fixing in position with cement mortar 1:3 (1 cement: 3 find sand,) including making recess in brick wall for pla cing the precast element in position and making good the same etc. complete in all respects inclusive of cost of all labour, materia ls, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for Reinforcement s hall be made as per relevant item of SOR.] :
-
-
-
... More
Conducting Close Interval Potential Logging Survey at an interval of 1 m over the buried line in the right of way including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications, and approved procedures identification of areas/locati ons where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the su rvey results in the graphical as well as tabular forms computerised colour print and complete in all respects and directions of Site Engineer / Engineer-in-Charge.Close Interval Natural Potential Logging Survey
22
131414
-
... More
2", 600#,GATE/ BALL, HOV, W/W
10
47483
-
... More
Exhaust fan / wall bracket fan wiring: Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade in cluding earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan inc luding providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawin gs. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one c ircuit.
12
29189
-
... More
Supplying, providing and filling fine sand in trenches in hard rocky stretches (Excluding additional 150mm deep trenching for rock trenching) around mainline pipe for providing a minimum padding thickness of 150 mm on top as well as at bottom of the mainline pipe. NOTE: (i) Item to be operated under specific instructions from Engineer-in-Charge (ii) Cost of additional depth of 150mm trenching for this item shall be paid separetly under item for "Extra for Rock trenching" Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
1000
1073800
-
... More
Decorative Light fittings - Supply, installation, connection, earthing and testing of the following fittings, including supply and i nstallation of drop pipes, hooks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other requir ed materials etc. as per specifications, drawings and directions of the Site Engineer including cost of all labour, tools, materials etc. complete in all respects.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from t he approved make list given in the specifications: LED light fittings, Recess mounting type, Sereno LED-RC869B LED 30S-6500 PSE W30L 120 D8 or equivalent approved make with LEDs: Supply and fixing of recess mounted weather proof light Sereno LED-RC869B LED 30S-650 0 PSE W30L120 D8 or equiavlent approved make with LEDs, 42 W or more, having 2950 lumens or more output. LED Fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc includ ing installation with LED of approved make.
10
89874
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia p erforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direct ions of the Engineer-in-Charge.
20
32214
-
... More
5 Pair Armoured PIJF Underground Telephone Cable as per specifications
50
6549
-
... More
8" x 600# Insulating Coupling Erection
4
45958
-
... More
Supply of full range (upto 8 feet) RF iD Disk type Electronic Markers as per tender specifications
15
37099
-
... More
Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for al uminium doors including necessary cutting and making good etc. complete.
6
3659
-
... More
"Radiographic Inspection: Inspection of welding by Digital Radiography (CR) or by conventional film radiographic method on all types of piping including proce ssing of images/ films and interpreting the results of weld quality and reporting the same to the Site Engineer together with recomm endations as to the acceptability or otherwise of the welds, submitting the finished radiographic films as may be approved or direct ed by Engineer-in-Charge inclusive of supply of all pesonnel, labour, materials, equipment, consumable, inputs, etc. and providing a ll services complete in all respects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size radiographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiography not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on type branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost. v) In case where radiography is not possible, verification by utrasonic testing shall be done at contractors cost., vi) Magenetic particle inspection as and where required shall be done at Contractors cost. vii) In case of conventional film radiography, all films shall be digitised and submitted to EIC/ Site Engineer in USB drives. viii) In case of Digital/ Computed Radiography, native files along with image/ pdf files shall be submitted to EIC/ Site Engineer in USB drives."
-
-
-
... More
501 - 750 METERS (with OFC conduit)
-
-
-
... More
4" WNRF 600#, ASME B16.5
20
64852
-
... More
12" x 150# 45° LR Bends
30
187230
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
272
2746390
-
... More
Supply of junction box of approved make as per specification detailed in the tender document complete with all connecting terminal & shunts, other fittings, DC bus, MS plate box, bakelite terminal board, cable termination bolts, painting etc.Supply of Flameproof & weatherproof CJB with accessories for distribution of current among pipelines as per technical specification.
3
72764
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
756
555168
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, remova ble as per requirement, all complete for borewell of :
-
-
-
... More
10.0 HP
1
187198
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets :
1
9150
-
... More
4" X 150# High Volume Long Range Foam Monitor 750 GPM capacity stand post type
8
3142557
-
... More
Laying cased crossings, by auger boring & jacking method, using casing pipes and 3LPE coated carrier pipes, according to drawings, specification(s) and providing all works, labour, inputs and materials/ consumables necessary to perform and complete the works in all respect in accordance with the contract, including collecting the pipes and other Owner-supplied materials from Owner#s issue point and loading, transporting them to site, setting out the works, aligning and welding the casing and carrier pipes, 100% radiography of weld joints of carrier pipes, field joint coating, holiday detection & repair of coating, applying atleast 2(two) coats of bitumastic paint over coat of suitable primer over casing pipe and two component epoxy coating for internal surface of casing pipe, excavating/ trenching and/or boring in all kinds of soil, including rocky strata if any, inserting the casing pipe into the bore, pre-hydrostatic testing of the carrier pipe and replacement / rectification of defects / pipes, installation of approved type of insulators throughout the cased section on the carrier pipe, carefully inserting the carrier pipe inside casing pipe by jacking/ pushing method, taking care not to damage the insulators, sealing the ends of the casing pipe with approved heat shrinkable wraparound type end seal, fixing of vent pipes at the ends of the casing pipe, priming and applying two coats of coal-tar based epoxy paint on underground portion of vent pipes, measuring final resistance between carrier pipe and casing, and doing preparation work necessary to produce correct resistance, applying one coat of primer and two coats of epoxy paint to all exposed and overground fittings & piping, proper compaction of backfill below carrier pipe at either ends, independently supporting the carrier pipe outside each end of the casing pipe by suitable RCC supports with neoprene rubber sheet below the carrier pipe, and strengthening with sand bags and proper compaction of earth below pipe, to prevent differential settlement of carrier pipe and damage to insulators, final clean-up and restoration of the site and disposal of wastes and surplus in accordance with the contract and supply of all materials (other than those specifically undertaken to be supplied by the Owner under contract) necessary for or in the performance of the work or for temporary or permanent incorporation in the works, and all other acts, matters and things necessary to make the pipeline ready for commissioning in all respect, as per directions of Site Engineer/ Engineer-in-Charge. NOTE: 1. The work of cased crossing will include the provision of temporary supports for existing installations in the road and/or railroads, the provision of diversions, the restoration of the railroad/embankment to its original state, maintenance for subsidence and all other precaution(s), work(s) and/or maintenance expressed or implied in the contract. 2. The work will also include providing necessary independent support to carrier pipe outside each end of casing pipe by suitable RCC supports, proper compaction of backfill below carrier pipe at either ends and strengthening with sand bags and/ or other suitable means so as to prevent differential settlement of the casing pipe and damage to insulators, including all labour, materials etc. as per direction of Site Engineer/ Engineer-in-Charge. 3. All materials (other than the Owner-supplied materials) required for performance of the work shall be supplied by the Contractor at his own cost. 4. Casing end seal shall be of approved type only and shall be installed by skilled personnel as per approved procedure and demonstration by manufacturer's representative (to be arranged by mainline contractor). 5. Carrier pipe to be brought to the desired level of crossing by providing natural gradient to trench bottom from sufficient distance and avoiding field bends so as to keep provision for any future widening of Railway/ Highway etc,. 6. Casing insulators (made of HDPE) shall be interlocking type, free from metallic nuts & bolts.
-
-
-
... More
1" 3000 Class St. NIPPLE
192
41913
-
... More
Providing and fixing Bail plug/ Bottom plug of required diameter to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I) :
-
-
-
... More
Supply of Solid State Diode Decoupling Device (min 5 kA @ 30 cycles) of approved make including required length of cable as per spec ifications Solid State Decoupling Device
28
2251767
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry.
1
106
-
... More
Supplying steel structural items at site such as joists, tubes, pipes, channels, angles, beams, plates, flats, square/ rectangular h ollow sections, bars, MS gratings, chequered plates, C.I. Rollers, bolts & nuts, washers, grouting/ foundation bolts, etc., fabricat ion and erection/fixing of structures such as saddle supports, pipe supports, valve supports, platforms, walkways, stairways, crosso vers, struts, chain link fencing posts, gate, collapsible gate, ladders, safety grills, signboards, supports for cable trench, cable racks, cable tray support, push button control posts, supporting structures etc. as per drawing including drilling holes, making sl ots for barbed line, wire hoisting, placing in position, embedding in concrete etc. including surface preparation using abrasive bla st cleaning or power tools cleaning, priming and painting the finished structure by applying one coat of High Build Epoxy Zinc Phosp hate Primer (min. 50 µm), one coat of Self-primed, surface tolerant, High build Epoxy mastic (min. 150 µm) and one finish coat of Is ocyanate Aliphatic Poly-Urethane(PU) Finish Paint (min. 50 µm) (Total DFT: 250 µm), including supply of all inputs such as labour, m aterials, consumables, tools and tackles, welding electrodes, paints of approved make as per vendor list in the tender, cutting to r equired size welding of joints, fixing anchor plates, bolts, threading, nuts, washers, sleeves etc. and necessary lettering of appro ved pattern on main gate, signboards etc. necessary to perform and complete the work in all respect, in accordance with drawings, sp ecifications and instructions of the Site Engineer/ EIC. Note: This item is excluding the cost of concrete work.
11
1516972
-
... More
3", 300#/#600/900#, SWING CHECK VALVE, W/W
2
11870
-
... More
Roof, side cladding, gable end cladding, gutters, rainwater pipes/ spouts etc. [Note: The area of sheet coverings shall be measured on the flat surface i.e. without allowance for laps and ribs].
35
64651
-
... More
Lateral load testing of single pile in accordance with IS Code of practice IS:2911 (Part-IV) for determining safe allowable lateral load on pile :
-
-
-
... More
Polyester powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
8
6126
-
... More
3" ANSI 150# Equal Tee
14
8920
-
... More
Supply and placing in position 5 mm thick steel checkered plates over cable ducts, valves, pits etc including keeping provision of h oles for lifting arrangement and providing lifting arrangement complete in all respect inclusive of cost of all labour, material, ca rriage etc as per specification & the direction of the engineer in-charge/site engineer
10
63513
-
... More
CABLE MARKER: Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concret e grouting, backfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
155
437901
-
... More
1/2" Plugs
15
645
-
... More
Applying priming coat :
-
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, manufactured in fully automatic batch ing plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , ex cluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as pe r IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design m ix is payable/ recoverable separately] :
-
-
-
... More
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknes s with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per s pecifications and directions of the Engineer-in-Charge :
-
-
-
... More
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set sprayin g using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete. [No te: This item to be operated only with the prior approval of the Engineer-in-Charge].
650
85727
-
... More
Beyond 120 cm girth upto and including 240 cm girth
20
209126
-
... More
Providing and laying design mix reinforced cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specifi ed design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading, levelling to required s lope/ camber and compacting mechanically by using screed board vibrators, vaccum dewatering process and finally finishing in require d texture by floating & brooming with wire brush, including steel form work with sturdy M.S. channel sections, curing, making provis ion for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing ex pansion joints as per drawing including dowel cap, sponge, sealing tape, bitumen painting, debonding tape and filling joints with ap proved joint filler and sealants, complete all as per direction of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealan ts, dowel bars with sleeve/ tie bars to be paid separately. (2) The item rate is inclusive of cost of dowel cap, sponge, sealing tap e, bitumen painting, debonding tape. (3) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design m ix is payable/ recoverable separately].
-
-
-
... More
2.5 kg clean agent extinguishers IS 15683 Marked
10
186440
-
... More
1" x 150# 90° LR Bends
120
13735
-
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified dia meter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. [Note: Length of pile for payment shall be measured upto to the bottom of pile cap] :
-
-
-
... More
3 NPS (3.5" OD x 0.216"/ 0.438" WT) ASTM A106/ A333/ A53 Pipe
400
1182832
-
... More
INSTALLATION OF SURFACE MOUNTED TEMPERATURE TRANSMITTER Installation and assistance in testing & commissioning of Surface Mounted te mperature elements/temperature transmitter (TT) by by welding the weld pad on the surface of the pipe, silicon paste as per the dir ections of engineer in-charge/site engineer and drawings.
5
77317
-
... More
Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
8130
31293670
-
... More
AIR CONDITIONER CASSETTE TYPE - Supply & Installation of 1.8T Cassette Type ACs flushed with false ceiling (Daiken / Hitachi / Car rier) along with 5KVA Voltage Stablizer & MS stand for outdoor unit, refregerant piping, drain piping complete as per instruction of EIC / Site Engineer
6
1196949
-
... More
6"x ANSI 600#, F/F, API 623/ BS-1873 GLOBE Valve
4
292519
-
... More
Laying of HDPE conduit and blowing of OFC cable inside the SV/MOV premises along the boundary wall, line item includes supply & installation of suitable clamps , connectors, fixture, corner bends, tools & tackles (comprising of anchor bolts/nuts/accessories etc) required for OFC entry inside SV/MOV loctaionalong the boundary wall by clamping of HDPE conduit at a height of 1 meter above the finished ground level and extending it along the length of boundary wall at 1 meter height upto the transition pit inside SV/RCP building as per attached drawing no. STD-793-00. The line item includes all sevices required for blowing of OFC cable iin HDPE conduit inside the MOV/SV loctaion as per STD - 793 drawing.
200
9204
-
... More
12" BLRF 150#, ASME B16.5
2
15668
-
... More
Supplying and fixing circular/ hexagonal M.S. Sheet ceiling fan box with clamp, 140 mm internal diameter, 73 mm height, 3 mm thick r im bottom, and top lid of 1.5 mm thick, M.S. sheet lids shall be screwed into the M.S. box by means of 3.0 mm diameter round headed screws, clamp shall be made of 12 mm diameter M.S. bar bent to shape as per standard drawings with over all length as 80 cm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of t he Engineer-in-Charge.
8
1833
-
... More
8.625"
22
516863
-
... More
4"x 6" Pilot Operated Surge Pressure Relief Valve (SRV) / Pressure Relief valve(PRV) 150# F/F
2
14783
-
... More
SS Two valve manifold 3 x 1/2" FNPT as per tender specifications
60
84283
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989
14
20340
-
... More
HDD INSTALLATION (Carrier Pipe without OFC Conduit) FROM 101 TO 300 METERS
-
-
-
... More
Supply of IS: 3589, Gr. Fe 410 pipes with factory coated internal coating at respective stations as per Station wise Break up of mat erial supply and as per technical specifications from approved vendors specified in tender document:
-
-
-
... More
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front do or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-00 : STD-483). The work inc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry through f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installation, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes supply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wherever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge.Type B (With Ingress Protection IP:55)
11
493749
-
... More
As built documentation for each station covering a) Control /signalling cable layout drawings, b) Cable trench details, c) Cable m arker details, d) Earth grid layout, e) Field instrument termination details, f) Cable schedule, g) Junction box wiring details, h) Earth resistivity measurement data, i) Field panel termination details, j) Calibration data of all instruments tested as per scope. , k) OTDR Traces of the laid OFC as applicable for respective stations
2
310128
-
... More
Laying of HDPE pipe(excluding blowing of OFC) in mainline pipe trench/ independent trench at the bottom in all types of soil (including roads, canals, rivers, nullahs, water course crossings, submerged crossings, saltpan areas etc.) including supply and installation of suitable straps for strapping the HDPE duct with mainline pipe for anti buoyancy, installation of HDPE duct accessories such as plastic couplers, end caps, end plugs, cable sealing plugs, supply and installation of warning tape, consumable guide rods, HDPE jointing, inspection of HDPE joints, testing the installed HDPE duct by blowing "mandrel" with compressed air, pressure testing the HDPE pipe after laying as per procedure and performing all work as per drawings, specifications and instruction of the Engineer-in-charge/ Site Engineer and provisions of the contract document for making the duct ready in all respect for OFC blowing. The job includes transportation, loading and unloading of HDPE ducts in nominal length of 1000 meters and duct accessories such as couplers, end caps, end sealing plugs etc. to various sites along the entire ROW / HDD crossing locations as per specifications and directions of Engineer-in-charge/ Site Engineer
15
342601
-
... More
8.625"
12
1516252
-
... More
8.625" in Normal Soil
10
147500
-
... More
12" x 150# 90° LR Bend
30
285925
-
... More
Installation of Manual Call Point (Explosion Proof & Weather Proof) in Hazardous area, terminating the cables at field and control p anel end, connecting to earthing grid by supplying and installing all the required materialssuch as supporting structure, cement con crete, painting, GI wire etc.(excluding supply of the Manual Call Point) complete in all respectsas per specifications.
8
31106
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design :
-
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
62
4857
-
... More
Corrosion couponPreparation & installation of corrosion coupon from owner supplied coated pipe. which involves preparation of sample of size 2"x4", application of pipeline coating material on the coupon, soldering 6 sq. mm. cable with coupon, sealing the soldered joint with epoxy, positioning the coupon at the pipe line depth and with in a distance of 0.5 M from the pipeline inclusive of cable & terminating the cable in the TLP terminal. The corrosion coupons are to be installed with specified Test lead points for which pr ior approval to be obtained from Owner. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and size as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. All as per the direction and specification detailed in the document complete with tools, tackles & other n ecessary requirement for preparation of the coupon. The work complete in all respect shall include supply of all labour, tools etc c omplete as per the directions of the Site Engineer.
4
10559
-
... More
450 mm x 450 mm rectangular section radial drain.
2
6766
-
... More
Erection, Installation,Testing & Commissioning of the Owner supplied high mast tower with the help of suitable tools and plants, wir ing of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour. Scope of work shall include erection & installation of high mast tower, cable connections, erect ion & installation of luminaries & aviation lights, lightning finial, all accessories, cables, etc., erection, foundation casting & grouting of owner supplied FLP feeder pillar, end connection termination & laying of Owner supplied cable from feeder pillar to bas e compartment of high mast complete with all materials and labour as per instruction of Site Engineer/EIC. Earthing works for High Mast tower including construction of earth pits to be operated in relevant separate item.For 20 M Height High Mast Tower
2
175298
-
... More
Carrying out stress and flexibility analysis of process, utility and firewater piping including creation of model in CAESAR-II (late st edition) software from isometric/ assembly piping drawings/ site measurements, analysis as per relevant codes/ standards, interpr etation, recommendations of suitable mitigation measures and design changes, if required as per specification and instructions of EI C/ Site Engineer. Soft copy of Model in software (CARSAR-II) to be provided in USB drive to EIC/ Site Engineer.
2
444635
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Flareweld Access Fitting Assembly
4
105885
-
... More
INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elasto mer mats as per specifications: Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
27
85603
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material :
-
-
-
... More
In all kinds of soil
3468
838909
-
... More
25 mm nominal bore
1
661
-
... More
Supply of junction box of approved make as per specification detailed in the tender document complete with all connecting terminal & shunts, other fittings, DC bus, MS plate box, bakelite terminal board, cable termination bolts, painting etc.Flameproof & weatherpr oof Anode Junction Box of approved make
3
52162
-
... More
Size of Tile 500x500 mm
5
8733
-
... More
8" WNRF 600# ASME B16.5
8
134350
-
... More
Explosimeter
4
185689
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
373
1249218
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, Un-plasticized PVC medium well casing (CM) pipe of req uired dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all dep ths, as per directions of the Engineer-in-Charge :
-
-
-
... More
Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealin g compound Grade-A in expansion joints. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER 100 METRE"]
2
1483
-
... More
"Silent Diesel Generating Set : Supply of CPCB IV compliant Silent Type DG set along-with processor based AMF system, Industrial Lead-Acid Batteries for Starting o f DG Set, Acoustic Enclosure, exhaust piping with its support structure, internal fuel tank of 12 hrs. capacity etc., as given in th e technical specification complete in all respects40 KVA, 3-Phase, 415 V"
1
1472301
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS:2800 (Part-I), including ne cessary bolts & nuts of required size complete. :
-
-
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 50 mm X 6 mm G.I. earthing strip
1000
336642
-
... More
FLOORING :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
481
105376
-
... More
8"x2" X 3000 Class, ASME B16.11
12
34592
-
... More
4", 600# GATE/ BALL, MOV/HOV,F/F
4
31652
-
... More
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates:
-
-
-
... More
"Installation of Valves: Taking delivery of valves of all types and pressure rating from the designated location within station prem ises, transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in exca vation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) or flood coating and wrapping of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing th e work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. Note: The cost of construction of Valve foundations shall be measured & paid separately under respective civil items."
-
-
-
... More
FINISHING :
-
-
-
... More
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 10 Pair capacity with mounting arrangements as per specification.
2
10773
-
... More
INSTALLATION OF EMERGENCY SHUTDOWN SWITCH: Installation and testing of emergency shut - down (ESD) Push button. This includes mounti ng of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site engineer, replacement of broken glass covers and painting it in red colour.
8
107354
-
... More
Beyond 30 cm girth upto and including 60 cm girth
15
7594
-
... More
WATER SUPPLY :
-
-
-
... More
Electrical resistance based corrosion monitoring system consisting of following items:Hollow Plug Assembly
4
78025
-
... More
600 VA UPS with 15 minutes battery back-up for LAN switch
3
28376
-
... More
Area of slab up to 0.50 sqm
15
84150
-
... More
"Cathodic Protection Units : Erection, testing and commissioning of cathodic protection units (CPTR/CPPSM); including supply and installation of all facilities, materials etc., including fuses, all supporting structures, laying and connecting the 1100 V Grade power cable (2 runs of 1Cx25 sqmm Cu. conductor XLPE insulated Armoured Cable) from DCDB to CPPSM unit / laying and connecting the 1100 V Grade power cable (owner pr ovided 1 run of 3Cx10 sqmm Al. conductor XLPE insulated Armoured Cable) from ACDB to CPTR unit or both as required, providing earth ing arrangement. The work includes furnishing the test results by conducting all the NO LOAD and ON LOAD tests on the CP units and a djusting settings as required and testing the pipeline section for full cathodic protection for entire stretch. The job complete in all respect shall include cost of all labour, tools as per specifications and directions of the Site Engineer / Engineer-in-Charge. Manual type Cathodic Protection Transformer Rectifier (CPTR) unit with 230 V AC input & 50 V, 75 A DC output rating as per specifica tions"
2
117992
-
... More
With medium setting bitumen emulsion :
-
-
-
... More
Wind socks
10
41382
-
... More
Up to 50 tonne capacity pile. [Note: Unit "EA" shall mean "PER TEST"]
2
53392
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :
-
-
-
... More
Lighting Distribution Board / AC Distribution Board - Supply , installation, testing and commissioning of TPN lighting / AC Distribu tion board of approved make, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conf orm to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings: Critical Light DB: Euro DB DBOXx of Havells or equivalent make complete with bus bar, neutral links, earth links and 1 x 6 A MCB SPN & 7x2 A SPN MCB
2
23291
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD upto 20 mm
10300
936951
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
6" SWMG ANSI 150#
2
554
-
... More
4.5" ODx 0.250" WT IS:3589 FE410 Pipe
100
344914
-
... More
3", 150#,GATE/ BALL, HOV, F/F
4
21579
-
... More
White Vitreous China Wash basin size 550x400 mm (Ref. Make: HINDWARE, Model: Cat No.-10010 or equivalent approved) with a pair of 15 mm C.P. brass pillar taps
2
7574
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :
-
-
-
... More
"Supplying & providing approved type of extruded polyethylene mesh (rock shield) on mainline pipe to protect the coating against roc ky soil including supply of all inputs such as labour, materials, consumables etc. necessary to perform and complete the work in all respects in accordance with the specifications, manufacturer's recommendation and instructions of Site Engineer / Engineer-in-Charg e. NOTE: 1. Proper lateral as well as transvers overlap shall be provided as per specifications/ manufacturers recommendation"
-
-
-
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 40 mm X 5 mm G.I. earthing strip
3000
706654
-
... More
"Supply & installation of MMO type anodes as per the approved configuration for 'Impressed Current Cathodic Protection' system of s tation piping / structures including all anodes, laying & termination of all anode tail cable (XLPE insulated copper conductor) suit able with length for connecting upto Anode junction box without any joints in between including supply and laying of PVC sleeve / t runk pipe & drawing all the lead wires through the pipe and connecting the same with Anode bus in Anode junction box including erec tion, providing foundations of Anode Junction Boxes & Cathode Junction Boxes, providing chain link fencing around Anode junction Box wherever required, as per specifications including supply of back fill material, excavation, backfill of earth and filling the san d with requisite back fill material as per specification & also compacting the same with soil for restoring it to normal finished gr ound level all complete with all labour and material as per instruction of Site Engineer / Engineer-in-Charge, Specifications and a pproved drawings. Note : Supply of anode tail cable for distributed anodes for station CP are covered elsewhere in SORStation : Distributed type shall ow"
2
881850
-
... More
2"x ANSI 600#, F/F, API 623/ BS-1873 GLOBE Valve
8
245779
-
... More
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including prepari ng the surface & cleaning with mechanical broom :
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m.
723
211237
-
... More
40 mm nominal dia pipes
27
19277
-
... More
Fasteners for Flanges 4" x 150# (0.625" Dia. X 4.00" Length)
464
35588
-
... More
2" x 1" ANSI 150# Un Equal Tee
10
6513
-
... More
Foam Trolley - 200/210 Lt
1
94215
-
... More
FLP/WP EXHAUST FANS: Flame proof, weather proof, single phase, 12" exhaust fan, IP65, LM6 type EF1001 of FCG or equivalent alongwith supporting frame, bolts, louvers, flame proof motor, including supply & installation of double compression cable glands & flame pro of plugs for sealing all spare entries, complete in all respects
2
33258
-
... More
Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
153
105323
-
... More
DRAINAGE :
-
-
-
... More
6" ANSI 150# Equal Tee
14
33948
-
... More
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the po st), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutt ing and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1760
1203962
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Conducting "Soil Resistivity Survey" at anode bed location after ascertaining its suitablity with respect to the existing system , f or installation of Anode Bed (deep / shallow / distributed), as per the specification, approved procedures and instructions of Site Engineer / Engineer-in-Charge.Soil Resitivity Survey
3
34459
-
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :
-
-
-
... More
1.315" ODx 0.179"WT (Sch.XS) ASTM A 106 Gr B Bare pipe
300
228330
-
... More
2 kg clean agent extinguishers IS 15683 Marked
10
149152
-
... More
Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs, sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge.Solid State Decoupling Device
28
229931
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
1374
1340993
-
... More
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required gra ding & sizes as per actual requirement, all complete as per directions of the Engineer-in-Charge.
2
3984
-
... More
18" OD x 0.375"/ 0.438"/ 0.500" WT APL 5L Pipe
50
507164
-
... More
Installation of surge arrestors including terminating the cables, testing & commissioning of surge arrestors etc. all complete with required material as per specification and directions of Site Engineer / Engineer-in-Charge.Surge Diverter/Spark Gap Surge Arrestor
8
66113
-
... More
3"x2" x Concentric Reducerx 600#
6
6393
-
... More
350 mm diameter
2
3755
-
... More
INSTALLATION & TESTING OF SCRAPPER DETECTOR: Installation, assistance in testing and commissioning of Scrapper Detector of various ratings aas per OEM recommandations, vendor drawings, directions of engineer in-charge/site engineer and other approved drawings.
5
38022
-
... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).
1
3731
-
... More
1 NPS (1.315" OD x 0.179"/ 0.250" WT) ASTM A106/ A333/ A53 Pipe
200
202960
-
... More
INSTALLATION OF PI
-
-
-
... More
Lighting Distribution Board / AC Distribution Board - Supply , installation, testing and commissioning of TPN lighting / AC Distribu tion board of approved make, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conf orm to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings: Type III Distribution Board: Doub le Door EURODB of Havells or equivalent approved make having bus bar 200 A TPN, 1 Incomer 125 A FP MCB Isolator with 125 A FP RCCB ( Senstivity 100 mA) alongwith 3 numbers 63 A TPN MCB as per specification.
2
214790
-
... More
6 A plug point wiring: Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper con ductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings.
6
16173
-
... More
Mechanical CSW Service
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of formwork for :
-
-
-
... More
Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid ov er a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including mak ing haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard desi gn and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc ., as per specifications and directions of the Engineer-in-Charge.
66
160058
-
... More
Shoe - Plain (110 mm)
6
908
-
... More
FLP & WP JUNCTION BOX - Supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for pr oviding cable termination of motor, including connection and termination of earthing wire and conduits etc., including supply & inst allation of double compression cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specificatio ns and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect: 4 way junction box with 4 cable entries (4 x 3/4") at bottom & 20 nos. terminals.
15
142289
-
... More
3" x 1" ANSI 150# Un Equal Tee
60
49276
-
... More
6" x 4" ANSI 150# Un Equal Tee
3
9862
-
... More
OFC & Telecom
-
-
-
... More
Single Tee with door (110x110x110 mm)
6
1622
-
... More
Cu- Cuso4 portable Half cellSupply of Cu- Cuso4 portable Half cell, as per specifications of approved make
1
6389
-
... More
2" 600# 90 deg LR Bend
16
9779
-
... More
101 - 300 METERS (with OFC conduit)
-
-
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 50 mm
65
73480
-
... More
4 NPS 4.5" OD x 0.237"/0.337" WT ASTM A106/ A333/ A53 Pipe
100
341492
-
... More
8.625" in Rocky Soil
910
20874672
-
... More
2 Pair unarmoured Telephone Cable as per specifications
500
33040
-
... More
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifica tions and directions of the Engineer-in-Charge.
119
778906
-
... More
8.625" OD
40
557432
-
... More
DISMANTLING & DEMOLISHING :
-
-
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
1
10675
-
... More
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
1
1362
-
... More
Manual High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150# MHVLR
4
20607
-
... More
Positive Pressure type self containing Breathing Apparatus
2
12618
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level :
-
-
-
... More
Fasteners for Flanges 1" x 150# (0.500" Dia. X 3" Length)
704
36551
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Installation, laying of 2 Pair PVC insulated copper conductor un-armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post-laying end to end testing of telephone cables. The job includes supply, installation, fixing of wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cre am colour) including RJ11 I/O with modular plate & switch box/ gang box for fixing the face plate & accessories, supply and installa tion of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as required complete in all res pects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labo ur, tools & tackles, materials etc.
500
95403
-
... More
Supplying & fixing welded steel wire fabric of rectangular mesh 75 x 25 mm size, weight not less than 7.75 Kg/sqm fixed on angle iro n frame by welding, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engin eer-in-Charge. [Note: This item is for openings in DG, Compresoor, Transformer/ VCB Room/ AVR Room. Angle iron frame shall be paid s eparately].
13
22987
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
81072
9004942
-
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 4 light points controlled by 1 switch
5
13559
-
... More
Two or more coats on new work
607
103872
-
... More
2" BLRF 150#,ASME B16.5
10
4366
-
... More
Initial Test (Test Load 2.5 times the Safe Capacity) [Note: Unit "EA" shall mean "PER TEST"]
2
142380
-
... More
Station CP readings and commissioning of station CP systemMeasuring, recording and submitting the cathodic protection readings for the station piping by repeated adjustments of the settings of the TRUs etc for achieving full/ maximum protection as per the criter ia and priority of protection as mentioned in the specifications ., measuring the relevant readings and "pipe to soil potential" r eadings at all the test lead locations in the station including the CP station parameters like current(AC/DC), voltage(AC/DC) , cir cuit resistance etc. , preparing and submitting pipe to soil potential profile, graphs and other data pertaining to the cathodic protection of the station CP system for all the station CP Systems installed as per respective item, job complete in all respects as per specification and instructions of Site Engineer / Engineer-in-Charge, including cost of all labour, instruments and services re ndered.
2
141471
-
... More
18"x6"x600# Unequal tee
3
116177
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm
39000
1607478
-
... More
1" WNRF 600#, ASME B16.5
59
43303
-
... More
Supply of Electronic Marker Locator cum Cable/ Pipe Locator, Fault Locator as per tender specifications
1
313487
-
... More
Supply of XLPE insulated , PVC sheathed cable, 1100 V grade conforming to IS: 7098 (P-1) as per specifications and approved makeCop per Cable size 2cx6 sq.mm Armoured
1350
270889
-
... More
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / p ressure Gauge and pressure transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and dra wings
5
51835
-
... More
6", 600#, GATE/ BALL, MOV/HOV, F/F
30
356088
-
... More
4 NPS 4.5" OD x 0.237"/0.337" WT ASTM A106/ A333/ A53 Pipe
40
144904
-
... More
Water curtain nozzle
5
13977
-
... More
For 10 Users
1
162299
-
... More
Finishing walls with textured exterior paint of required shade :
-
-
-
... More
Supply, erection and installation of GI Pipe of 100 mm nominal bore medium Class B as per IS1239 subject to owner's approval including the supply & installation of all necessary pipe fittings such as bends, sockets, elbows, tees etc. bending, threading, clamping, plugs, packings, bushing etc. as required for sub ducting HDPE duct as per directions of Engineer-in-charge/ Site Engineer including cost of all labour, tools, materials complete in all respects.
20
32591
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level :
-
-
-
... More
4.5" ODx 0.237" WT ASTM A106/ ASTM A53/ API 5LGr B Pipe
50
99887
-
... More
Polyester powder coated (Minimum thickness 50 micron) Aluminium
8
946
-
... More
"Supply & installation of Anode bed ( deep well type with MMO anodes) as per the approved configuration for Impressed Current Catho dic Protection system including supply, laying & termination of all anodes, anode tail cable (XLPE insulated copper conductor) suit able with length for connecting upto Anode junction box without any joints in between including laying of PVC sleeve / trunk pipe, casing pipe , centralizers, vent pipe & drawing all the lead wires through the pipe and connecting the same with Anode bus in Anode junction box including erection and providing foundation of Anode Junction Box as per specifications inlcuding supply, excavation , backfill of earth etc. as per specification & also compacting the same with soil for restoring it to normal finished ground level all complete with all labour & material as per instruction of Site Engineer / Engineer-in-Charge, Specifications and approved draw ings. Note : Each Anode bed means anode bed at each location irrespective of number of anode strings required.Mainline CP & Station CP : A node bed deep well type"
1
690439
-
... More
Supplying, providing and filling soft soil in trenches in stretches other than normal soil and hard rock (including additional 150mm deep trenching) around mainline pipe for providing a minimum padding thickness of 150mm on top as well as at bottom of the mainline pipe. Padding materials shall be sand/graded soil/other suitable material containing no gravel, rock, or lumps of hard soil. The graded soil for padding shall pass through sieve size ASTM-10 or ISO-2.00. Acceptable padding shall be placed under the pipeline before its installation and around it after installation, to establish at both sides and on top of the pipe a permanent layer of padding. The thickness of compacted padding shall be at least 150mm. The trench shall be deeper by at least 150mm. The trench shall be evenly and sufficiently padded to keep the pipe, when in place, at least 150mm above the bottom of excavated trench. NOTE: (i) Item to be operated under specific instructions from Engineer-in-Charge (ii) Cost of additional depth of 150mm trenching for this item shall be included in this item itself. Diameter: 8.625" Quantity considered for laying of Twin pipelines (8.625" OD MS & 8.625" OD HSD)in a single stretch
20
11988
-
... More
INSTALLATION OF DPT: Installation, assistance in testing and commissioning of Differential Pressure Transmitter (DPT) as per the dir ections of Engineer in-charge/ Site engineer and drawings.
4
70225
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements