India Tourism Development Corporation Limited Tender

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sq mm

Sprinkler System Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:

100 mm

80 mm

150 mm

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories

Horizontal side wall sprinkler

Pendent sprinkler

Wet Riser System: Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30m

Supply and Fixing Single headed internal hydrant valve with instantaneous Gunmetal/Stainless steel coupling of 63 mm dia with Cast Iron wheel ISI marked conforming to IS 5290 (type-A) with blank gunmetal/stainless steel cap and chain as required

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) (a) GUN METAL as required

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Gun metal

Supplying & fixing of 20 mm dia bore reinforced rubber of length 36.5mtr fitted with 5mm dia nozzle with a ball valve. The hose reel shall be recessed swinging type with rell drum hose provided with necessary couplings.

Supply & Fixing of 25mm dia ball valve,Cast Iron IS 9890 class - 125 as required

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4WAY 150 mm dia M.S Pipe

Supply, fixing, testing and commissioning of slim seal type butterfly valve PN 1.6 rating with shperoidal graphite iron disc (SG iron), with rubber seal and tested to 10kg / sq.cm including a set of suitable MS flanges, bolts, nuts GI washers, rubber gaskets etc.,as per IS 13095 following size complete as required.

150mm dia

100mm dia

80mm dia

Providing, installation, testing and commissioning of NON RETURN Valve cast Iron double flange as per 1S/5312 PN 1.6 rating with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket of following size complete rubber gasket as required.

150mm dia

100 mm dia.

80 mm dia.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supply, erection, testing and commissioning of NON RISING cast Iron double flange SLUICE Valve as per 1S1/14846 PN 1.6 rating comple te with Bronze body & wedge Stainless Steel spindle, G land packing, Rubber gasket, nuts, bolts, washer etc as required of following sizes

150 mm

80 mm

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

SITC of Industrial type pressure gauges with gun metal / brass valves 100 mm

Supply erection testing and commissioning of FIRE HOSE CABINET 16 gauge of MS Double Door Hose Box Corrosion Resistance: Yes Frp Thickness: 1.2 Mm Surface Treatment: Color Coated Features: Low maintenance High tensile strength Compact design Hose Pipe Size (m)15mtr Number Of Hoses2, Color RED, Coating powder coating, Feature Heat Resistant, Mounted Wall Mounted size:750x600x250

Pump Section: SITC of Electric Motor Driven Main Fire Pump Location - Plant Room: Horizontal split casing, high pressure, single/ multistage centrifugal type fire pump capable of delivering 2280LPM (38 LPS) against a total head of 70 M complete with proper connection to suction and delivery line, including 80 mm bypass arrangement for testing of pumps. Gland arrangement shall be included, having name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Pump shall be capable of discharging not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head. Squirrel cage, induction motor, TEFC type suitable for 415 + 6%V, 3 phase, 50 Hz, AC supply, of suitable HP rating with synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F' insulation. The motor shall conform to IS 325 with flexible coupling and coupling guard. Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy-duty Anti Vibration pads (6 Nos.). Suitable reinforced cement concrete pump foundation as per manufacturer's design including foundation bolts, washers as required. Drain Pipe with Valve (50 mm dia) Main Fire Pump Discharge : 2280 LPM (38 LPS) App. Head : 70 M, App. Motor H.P: 60 HP (45 KW) or as per manufacturer recommendation. Rate should include interconnection cables, foundation and foundation bolts.

Diesel Engine Driven Fire Pump [Stand by pump] Location – Plant Room. Supplying, installing, testing & commissioning of fire authority approved Diesel Engine driven fire pump suitable for automatic/manual operations consisting of the following. Horizontal split casing, high pressure single/ multistage centrifugal type fire pump capable of delivering 2280 LPM (38 LPS) against a total head of 70 M complete with proper connection to suction and delivery line, and including 80 mm bypass arrangement for testing of pumps. Gland arrangement shall be included, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Pump shall be capable of discharging not less than 150% of rated capacity at a head not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head. Water cooled diesel engine of 68 BHP or as per manufacturer at 2150 RPM for the above pump complete with standard accessories & suitable cooling system as described in specifications. Common base plate for mounting pump & engine of required strength manufactured out of M.S. channels as per manufacture's recommendation with heavy duty Anti Vibration pads. (Cushy foot) (8 nos., heavy duty). Flexible Coupling & coupling guard for direct coupling of engine& pump. Suitable reinforced cement concrete pump foundations as per manufacturer design including foundation bolts, washer as required.1 No. 200 ltr capacity oil storage tank fabricated from 3 mm thick M.S. plates. Tank shall be provided with inlet, outlet, overflow, air vent, drain connections, filling connection & magnetic level indicator. Tank shall be mounted on a suitable steel structure (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside & two or more coats of synthetic enamel paint outside over two coats of red oxide primer. Diesel storage tank shall be double skin. 24 volts 180 AH lead acid battery (12 volts - 2 Nos) with boost/Trickle charger for starting the engine automatically complete as required. Diesel Engine driven pump of Discharge: 2280 LPM (38 LPS).App. Head: 70 M. Rate should include inter connecting cables, foundation & foundation bolts.

Electrical Motor Driven Jockey Pump Location - Plant Room: Supplying, installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable forautomatic/manual operation consisting of the following:. Horizontal mounted multistage jockey pump having cast iron body, S.S. impeller, stainless shaft with mechanical seal capable of delivering 180 LPM against total head of 70 M while running at 2900 RPM complete. The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side including bypass arrangement (with 25 mm GM stop valve and up to 5 meter G.I. class 'C' pipe) for testing of working of the pumping set as required. The pump should meet the recommended requirement and must be approved by thelocal fire authority. Squirrel cage induction motor suitable for 415 + 6%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard. Squirrel cage induction motor suitable for 415 + 6%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard .Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendationwith heavy duty 4 Nos. Anti Vibration pads.(Cushy foot). Suitable reinforced cement concrete pump foundations as per manufacturer's design including foundation bolts, washers as required.Drain pipe with valve (25 mm d). Jockey Pump. Discharge.180 LPM (3 LPS) / 10.8 M3/hr. App Head:70 M. App. HP:5.5 HP (4.1 kw) or As permanufacturer recommendation. Rate shall include inter connecting cables, foundation & foundation bolts. (1H+1S).

(Terrace Pump) : Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with antin vibration pads. 900 lpm at 35 m Head

ELECTRICAL WORKS: PANELS: Design, manufacture, supply, installation, testing and commissioning of electrical Panel following MV switchgear panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting/wall mounted, sheet metal clad, cubicle. All MCCBs shall be provided with magnetic & adjustable thermal releases for short circuit & overload protection with front drive kit (rotary operating handle).Fault current wherever mentioned shall be Ics value. (Ics =100% Icu) All MCCB shall be provided with door interlocked rotary handle with ON/OFF/TRIP position indicator, continuous variable thermal magnetic O/C and S/C releases. The MCCB above 250A rating shall be provided with microprocessor-based releases (settable at site). I/C MCCB shall be provided with E/F release/Earth Fault protection also.All feeder doors shall have pad locking arrangement. All TP/TPN feeders shall have solid isolable neutral link. All MCCB used in starter feeder shall be suitable for motor duty application. Starters shall be provided with MPCB/MCCB, suitable for the specified Kw of motor, AC3 power contactors, single phasing preventor, on-off Trip Indication Lamps, Start Stop Push Buttons, Auto Manual selector switch Ammeter with Suitable ratio CTs, Auxillary Contacts for Building Automation system and remote control, interlocking etc. All outgoing terminals (power and control) shall be brought upto

cable alley. 10% extra terminals shall be provided.Removable lifting hook shall be provided in all transportation section.All CT, PT shall be cast resin.All meters are digital type and with RS-485 port.Panel shall be powder coated of approved shade with minimum 60 micron thickness.MCCB's/MPCB's/MCB's in one particular panel shall be of one similar make.Size of Voltmeter / Ammeter for incomer also, 96mm x 96mm flush mounted with shrouded terminal shall be used in the panel.Bus bar chamber shall be kept at top of the all panels. All bus bar shall be insulated with coloured PVC Sleeve i.e.RYB,BK as per colour code.Internal wiring of panel shall be with size 2.5sqmm FRLSH, Flexible Copper Conductor for CT circuit and control wiring with 1.5 sqmm. All indicating light shall be LED type .Each vertical section of floor mounted panel shall have independent base frame (75mm x 40mm) size made out of 3mm sheet steel.Wherever only voltmeter & ammeter are required, the same may be provided in combined meter suitable for both parameter.All the makes shall be as per Client approved make list only.All motor circuit MCB shall be motor duty with 'C' curve.All power contactor shall be of AC3 duty.All indoor Panel shall be IP-52 & outdoor Panel shall be IP-55.Starter Control scheme shall be as per schedule

FIRE FIGHTING PANEL - 1 No. Incoming : One (1) No. 250A TPN MCCB (25 KA). One (1) No. combind digital Ameter & Volt Meter 1 Set of phase indication lamps with 2 Amp SP MCB. 1 Set indication lamps for ON/OFF/Trip Indication. Bus Bar 300 Amps, 25KA, TPN Aluminium bus bar. It shall be insulated with heat- shrinkable sleeves and shall be color coded. Outgoing: 1 Nos. DOL Starters, suitable for 51 KW motor, complete with 160 A TP MCCB of 25 KA, Ammeter (0-160Amp) with selector switch and CT’s of ratio 160/5A, 5VA class 1.0 as required and as per SLD.Including Providing Pressure switches and wiring from pressure switches to starters. (Main Fire Pump i.e.Hydrant, Sprinkler pump) 1 No. DOL Starters, suitable for 6 KW motor, complete with a suitable range of TP MPCB with the thermal range as per Type-II co-ordination chart. (Jocky Pump-I) 1 No. The diesel engine-driven fire pump shall start automatically in the event of a pressure drop beyond the preset limit on mains failure or failure of electrically driven pumps to start. AMF logic for starting the diesel engine fire pump with trickle / boost battery charger, DC ammeter Voltmeter, Hooter indication, etc to meet the system requirement.Including Providing Pressure switches and wiring from pressure switches to Diesel Engine Control Panel. 1 No 25A DP MCB. 1 No 63A TPN MCCB.

Design, manufacture, supply, installation, testing and commissioning of Terrace Pump Pannel 1 No. DOL Starters, suitable for 6 KW motor, complete with suitable range of TP MPCB with thermal range as per Type-II co ordination chart. (Terrace Pump-I)

Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as required.

3.5 C x 35 sq mm

3.5 C x 70 sq mm

3.5 C x 185 sq mm

3C x 16 Sqmm

Supplying & Laying of PVC insulated & PVC sheathed/XLPE power Cable of 1.1KV grade of following size on wall surface as required.

3.5 C x 70 sq mm

3.5 Cx 35 sq mm

3.5 C x 185 sq mm

3C x 16 Sqmm

First Aid Fire Fighting Appliances : Providing and fixing CO2 fire extinguishers consisting of welded M.S cylindrical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 Kg ISI Marked. (IS : 15683 : 2006)

Providing and fixing ABC stored pressure dry chemical powder (mono ammonium phosphate) Fire Extinguisher IS : 15683 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases.Capacity 6 Kg ISI Marked (IS : 15683 : 2006)

Supplying and installing of fire buckets made of 24 gauge galvanized steel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 4 buckets).

Suply, fixing, testing and commissioning of wall mounted/Hanging type auto glow signage consisting of vinyl sheet coated with Zinc sulphate photo luminescent & pasted on 4mm thick acrylic sheet of suitable size

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

Civil Items : Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.Corrider, Ground Floor Corrider , Ustav Hall , Konark Hall , Lobby , Restaurant etc.

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. TWO COATS

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lift involved

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)