Housing And Urban Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 67,441Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Construction Of Extension Of Administrative Building With Knowledge Centre-cum-meeting Room And Lounge Facility For Shgs In The 1st Floor, Wash-cum-toilet For Cesspoll Vehicle Staff In The Ground Floor And Wash And Toilets For Shgs And Others In The
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ORULB_106428_2Tender No
GUDGR-NAC-01/2024-25Tender Authority
Housing And Urban Development Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
20mm dia CPVC pipe (internal wiring) - GF
20mm dia CPVC pipe (internal wiring) - FF
45
278
12537
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.
250mm thick wall hole of 12x12x25cm
Ground Floor
5
55
279.5
First Floor
5
60
300
supplying all materials, labour, T&P and cutting holes in R.C.C Floors, roofs etc upto 19mm thick for passing G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:2:4) including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
Ground Floor
5
174
870.5
First Floor
5
191
955.5
Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the following nominal bore with supply of all jointing materialsetc. all completed as per approved specification and direction of E.I.C
15 mm dia C.P Bib cock(Short Body)
2
905
1810.8
15 mm dia C.P Bib cock (Long Body)
2
979
1959
15 mm dia C.P Two way Bib cock
6
1298
7788.6
15 mm C.P flange
10
60
604.8
15 mm C.P Extension piece 50 mm long
10
88
889.7
15 mm dia C.P Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer)
6
826
4956
15mm dia CP pillar cock
8
901
7208
40mm dia brass stop cock/F.W.V (Sakti make)
1
2557
2557.4
32mm dia brass stop cock/F.W.V (Sakti make)
2
2007
4015
15 mm C.P/ concealed stop cock
3
1108
3325.8
15 mm C.P/ Angle stop cock
12
922
11066.4
Overhead Shower ø100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with Shower Arm ø20mm & 280mm Long Round Shape for Ceiling Mounted Showers with Flange
3
579
1738.5
Sink Cock with Swinging Spout (Wall Mounted Model)
1
1436
1436.7
125mm dia CP gratings
10
55
556.2
Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C
10 lit PVC low level cistern-White (Slimline-white)
6
1918
11508
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
2000 lits capacity on the roof of 1st floor(IInd Floor)
2
22045
44091.4
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (soil, waste, rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent)
110 mmdia UPVC SWR Pipe (Type B)
15
496
7452
75mm dia U-PVC SWR pipes (Type B)
15
355
5328
75x75x75 mm dia UPVC Plain Shoe Bend 450
2
80
160.2
110x110x110 mm dia UPVC SWR Single Junction with Door
3
285
857.88
110x110x110 mm dia UPVC SWR Double junction with Door
1
361
361.33
110x110x110 mm dia UPVC SWR Bend 87.50
3
221
665.55
110x110x110 mm dia UPVC Plain Shoe Bend 450
3
140
422.82
110 mm dia UPVC Cowl
5
43
215.3
75 mm dia UPVC Cowl
2
28
56.78
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.
250mm to 375mm thick wall
5
201
1005.5
Supplying all materials, labour, T&P and cutting holes in R.C.C roofs and cornice etc upto 19mm thick for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
5
170
851
Supplying all materials, labour, T&P and cutting holes in R.C.C chajja for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
5
119
599.5
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580x440mm orissa pattern Squatting pan (White) (Hindware/Parryware/Neycer/CERA)
2
3599
7199.8
Fixing of 100 mm dia 'P' or 'S' Trap (with horn or without horn)for water closet squatting pan including jointing with trap and pan in cement mortar (1:1) etc all complete as per specification and direction of the E.I.C.
100 mm dia P trap UPVC
5
374
1873.5
100 mm dia S trap UPVC
5
598
2991.7
Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.
White vitrous china wash down water closet(E.W.C) 'P'/'S' trap (Hindware/Parryware/Neycer/CERA)
4
2989
11958.4
Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
Plastic seat cover with cp/brass hinges and rubber buffers (Hindware/Parryware/Neycer/CERA)
4
791
3164
Supplying all materials, labour, T&P and fixing vitrous China-Half Stall wall urinal Flat back including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.
Sensor operated wall Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm (JAQUAR Make, Model: URS-WHT-13253N) and Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated) (JAQUAR Make, Model: SNR-STL-51087
5
16337
81687.5
Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar tap with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.
550mm x 400mm wash hand basin (Hindware/Parryware/Neycer/CERA)
8
2721
21768.8
Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.
Pedestrial for 550mm x 400mm wash hand basin White (Hindware/Parryware/Neycer/CERA)
8
2621
20975.2
Supplying all materials, labour, T&P and fixing P.V.C waste pipe of the following nominal diameter for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.
P.V.C waste pipe 40mm dia with length not less than 700 mm
8
107
862.64
Supplying all materials, labour, T&P and fixing 15 mm dia P.V.C connection pipe of the following nominal diameter and making connection with Pillar cock and supply main for wash hand basin complete etc all complete as per specification and direction of the E.I.C.
8
88
708.64
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.
24''x18''x10'' stainless steel Kitchen sink/Laboratory sink (MOUSUMI Make)
1
5371
5371.5
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C.
600mm x 600mm B.E glass mirror
8
2071
16575.2
Supplying all materials, labour, T&P and fixing of standard sized glass shelf with cp bracket and guard rail and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C.Glass shelf with cp bracket and guard rail (JAQUAR Make, Model: ACN-CHR-1171N)
8
1595
12760
Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
Single Towel Rail 600mm Long, Stainless Steel (JAQUAR Make, Model:ACN-CHR-1111SM)
8
880
7047.04
Supplying all materials,labour, T&P and fixing standard sized CP Soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
Soap Dish Holder (JAQUAR Make, Model:ACN-CHR-1131N)
12
319
3834.96
Supplying all materials, labour, T&P and providing Curved shaped urinal partition with 8mm frosted glass Size H: 900mm W: 450mm including fitting & fixing in wall and making good the damages etc as per specification and direction of the E.I. (JAQUAR Make, Model: CJSE-CHR-810UC450X)
4
5413
21655.08
Providing and laying water proofing treatment in sunken portion/ raised portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. The rate includes provision of outlet pipe of 25mm size CPVC pipe for exhaust of percolation water if any. (CPWD AR Vol-II Si.22.5)
In 1st Floor
19.53
281
5487.93
Supplying all materials labour T&P and filling in foundation and plinth with coarse sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor In 1st Floor
1.51
763
1153.31
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor
0.76
8746
6647.49
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
0.25 x 0.25m inside size
4
2090
8360.8
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 760mm x 760mm x 460mmm inspection chamber
5
10378
51892.5
Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.
110 mm dia PVC pipe line (All round)
20
1526
30528
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.
1.40m dia x 2.00 m deep Soakway pit
1
21729
21729.4
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2
8
472
3776
-do-………Group B 1.2.2 - 1.24.2
13
714
9282
-do-………Group C 1.2.2 - 1.24.2
33
1019
33627
Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2
6
714
4284
Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2
1
1019
1019
Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)
2
459
918
Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4)
8
228
1824
Supply and Fixing to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module (1.24.1)
15
222
3330
..do 4 Module
1
269
269
..do 6 Module
1
327
327
..do 8 Module
2
369
738
..do 12 Module
6
482
2892
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). 2x1.5 sqmm + 1 x 1.0 sqmm( 1 .8)
170
133
22610
-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)
105
148
15540
-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)
105
165
17325
-do- 4x6sqmm +2x2.5sqmm (1.8.10)
27
294
7938
Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3)
1
2604
2604
Supply and Fixing of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)
6
134
804
Supply and Fixing of 6 way (6+18) TPN MCB DB double door (2.5.6)
1
2516
2516
Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp (Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY
1
606
606.05
Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
27
17
477.9
Supply and Fixing of 15W LED Bulb
27
325
8795.25
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.5+3.6)
1
5660
5660
Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18)
12
97
1164
Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)
6
2436
14616
S/F of 24W Recess Mounted Square Shape LED luminary,Make-Havells/Crompton/Philips
18
2007
36139.14
S/F of Fan hook S, Type on ceiling.(M-22)
6
262
1574.58
Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)
8
2078
16628.88
S/F of computer board consisting of 3 nos. of 5 amp Modular plug and switch complete with wiring on 12M GI.box with Front cover(1.24.9 +1.25.4 + 2.5.1)
2
1930
3860.42
S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30)
1
124
124
S/F of 60 watt. LED street light fitting including necessary connection. (Make- crompton/poly cab/Havells/ HPL/Philips)
2
7823
15647.8
S/F of 1.5sqmm mult-strand copper wire for invertor wiring
60
49
2953.8
S/F of 6 pin 15/16A Modular socket (1.25.5)
6
215
1292.7
S/F of 100W Step type Modular Regulator
6
721
4326.12
S/F of 32A DP Modular Switch with Neon Indicator (Heavy Duty)
6
359
2154.9
S/F of 32A DP MCB for AC
6
898
5393.88
S/F of 63A FP MCB
1
2693
2693.45
CIVIL WORKS
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the E.I.C.
88.11
210
18588.57
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
46.31
763
35370.65
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
13.24
6195
82028.02
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
39.49
7065
279033.97
Columns up to lintel
37.62
7159
269333.62
Second Floor
3.52
7266
25578.85
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
80.63
8887
716593.48
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
42.45
234
9964.29
RCC Column & Beam
105.33
1021
107644.1
Lintel
14.08
529
7453.25
RCC roof slab, Chaja etc.
54.87
676
37142.6
Staircase
19.97
902
18028.32
RCC Column & Beam
113.03
1226
138615.47
Lintel
58.58
635
37211.19
Roof Slab &Chaja at corridor opening
176.37
812
143212.44
Staircase
19.3
1083
20908.08
Roof Slab
22.58
974
22010.98
Second Floor
11.88
1471
17482.96
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
12.75
5117
65245.07
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
18.13
5150
93374.21
First Floor
52.24
5443
284355.9
Second Floor
22.4
5780
129476.7
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
146.43
231
33848.76
First Floor
437.45
236
103487.55
Second Floor
110.52
242
26761.31
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
97.89
163
15987.39
First Floor
172.25
166
28757.14
Second Floor
102.87
170
17558.88
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
69.34
176
12241.28
First Floor
177.32
180
32055.91
Second Floor
32.2
185
5961.83
Supplying, fitting & fixing of vitrified floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc.
39.41
1192
46996.42
First Floor
116.81
1203
140545.79
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
22.2
1817
40350.28
Riser of steps
24.45
1828
44701.69
Second Floor
22.2
1839
40837.79
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C
24.08
959
23093.68
FF Toilet
30.19
969
29276.75
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the E.I.C
77.18
918
70903.72
First Floor
61.74
934
57714.55
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of laminated board
18.62
6702
124765.36
Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P including cost of black glass etc complete as per direction of Engineer in Charge.
10.94
3980
43542.62
Supplying all materials, labour, T&P and providing and fixing in position M.S panelled door double leaved with M.S frame overall size including frame 1980mm Height x 1070mm Width made out of the following materials conforming to relevant Indian Standard specification, Frame: 35x35x6mm MS angle, Shutter stile: Top and bottom rail 25x25x3mm, MS angle door panell: 1.0mm C R sheet panell stiffner covering width of each leaf 19x5mm MS flat - 3nos on each leaf, Hinges size: 100mm - 6nos (3nos on each side) bought out as per ISS, Hold fast: 35x35x6mm, MS angle 175mm length bifurcated at the tip - 3nos on each side, Handle: 19x5mm MS flat fabricated - 4nos, Aldrop: 2nos bought out as per ISS, Tower bolt: 2nos bought out as per ISS, Approximate weight - 54kg including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
77.18
85
6560.3
Supplying, fitting & fixing of M.S. window grill of approved design
382.73
85
32531.63
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
17.33
3020
52338.33
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C
62.7
551
34591.59
Supplying all materials, labour, T&P and fixing Aluminum frame glass louvers for ventilators
6.84
3980
27224.09
Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
555.48
96
53326.08
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (For Plastering surface)
928.49
66
62041.7
Supplying all materials, labour, T&P and Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade
555.48
89
49509.93
Supplying all materials, labour, T&P and finishing walls with water proofing weather coat of approved shade on new work two coats to give an even shade etc all complete as per specification and direction of the E.I.C
373.01
82
30676.34
Supplying all materials, labour, T&P and providing painting 2 coat with any approved enamel paint on new iron work all complete as per specification and direction of the E.I.C
13.14
152
2005.82
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer over iron work all complete as per specification and direction of the E.I.C
13.14
61
802.99
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.
28
372
10421.6
1/3 rd volume of Earthwork in excavation Item-1
29.37
58
1721.08
2/3rd volume of earthwork in excavation
58.74
276
16212.83
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect
13.5
2515
33952.5
Dismantling and reinstallation work of 10KW roof top Solar Power plant from First floor to Second floor with dismantling of solar pannels, blocks, module rewiring, civil foundation for inverter, inverter installation, AJB reinstallation, installation and commissioning of system, solar log activation and monitoring, any other additional items required.
10
3800
38000
Dismantling and removing RCC columns, beams, slabs, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C
2
1296
2592.4
Supplying and fixing of 60 mm thick cement concrete interlocking Paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. compete in all respect confirming to IRC SP-63:2018.
40
485
19411.2
Supplying and fixing of Precast Kerb stone of size 300mx300mmx150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. compete in all respect confirming to IS-5758:1984.
140
162
22758.4
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
4
763
3055.12
Drilling suitable holes in reinforcement or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge. Upto and including 12 mm dia
98
66
6483.68
sale counter
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the E.I.C.
21.02
210
4434.59
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
4.53
763
3459.92
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
4.53
6195
28065.48
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
9.82
7065
69387.53
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
9.82
8887
87274.56
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
20.49
234
4809.62
Column
25.71
1021
26274.85
R.C.C. Lintel
13.41
529
7098.58
R.C.C. Roof Slab, Chaja etc.
24.16
676
16354.39
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
3.8
5117
19445.59
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
7.35
5150
37854.41
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
47.3
231
10933.87
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
77.22
163
12611.57
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
34.07
176
6014.72
Supplying, fitting & fixing of vitrified floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc.
22.59
1192
26938.58
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of laminated board.
2.21
6702
14812.33
Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P including cost of black glass etc complete as per direction of Engineer in Charge.
4.05
3980
16119.53
Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
51.29
96
4923.84
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (for inside plaster surface)
51.29
66
3427.2
Supplying all materials, labour, T&P and Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade
51.29
89
4571.48
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (for outside plaster surface)
77.22
66
5159.84
Supplying all materials, labour, T&P and finishing walls with water proofing weather coat of approved shade on new work two coats to give an even shade etc all complete as per specification and direction of the E.I.C
77.22
82
6350.57
Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.
4
372
1488.8
1/3 rd volume of earth work in excavation
7.01
58
410.79
2/3 rd volume of earth work in excavation
14.01
276
3866.9
Electrical Works
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)
3
472
1416
Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)
3
459
1377
Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
2
17
35.4
Supply and Fixing of 15W LED Bulb
2
325
651.5
Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)
1
2436
2436.2
S/F of 6 pin 15/16A Modular socket (1.25.5)
1
215
215.45
Co - Compost storage shed
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the E.I.C.
28.48
210
6008.43
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C.
15.69
763
11983.71
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
6.28
6195
38907.55
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
11.9
7065
84084.69
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
11.9
8887
105760.42
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
32.89
234
7720.27
RCC Column & Beam
24.91
1021
25457.27
Lintel
21.19
529
11216.93
RCC roof slab, Chaja etc.
16.8
676
11372.26
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
4.22
5354
22596.33
Supplying all materials, labour, T&P and providing brick work with Fly Ash Bricks(25 cm x 12 cm x 8 cm) having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
11.19
5387
60287.02
Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
48.65
231
11245.93
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
66.22
163
10815.05
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
58.5
176
10327.59
Supplying all materials, labour, T&P and providing 25mm thick artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
37.38
364
13630.99
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the E.I.C (for Plaster surface)
173.37
66
11584.58
Supplying all materials, labour, T&P and Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade
48.65
89
4336.17
Supplying all materials, labour, T&P and finishing walls with water proofing weather coat of approved shade on new work two coats to give an even shade etc all complete as per specification and direction of the E.I.C
124.72
82
10256.97
Supplying all materials, labour, T&P and fixing of Aluminium roof sheet in roof drilling holes in wind ties including fixing of ridges, valleys, wind ties etc all complete as per specification and direction of the E.I.C
50
1810
90514.5
Supplying all materials, labour, T&P and fixing of ISMC 125 (12.7 kg per m)
488.95
85
41560.75
Quantity 1/3rd of excavation
9.49
58
556.11
Quantity 2/3rd of excavation
18.99
276
5241.43
Electrical Works
Recessed wiring to Light point/ Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)
9
472
4248
Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)
3
459
1377
Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
6
17
106.2
Supply and Fixing of 15W LED Bulb
6
325
1954.5
Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)
3
2436
7308.6
S/F of 6 pin 15/16A Modular socket (1.25.5)
1
215
215.45
Non-Core Components in Extension
Supplying, placing and fixing of Godrej Mingle Conference Table with AV Integration (10 Seater) of Frame Material made of Prelaminated Twin Particle Board and Table Top Material made of MDF Board with dimensions of 3000mm x 740mm x 1150mm with termite and weather proof including cost of all materials and direction of Engineer-in-charge
1
58426
58426
Supplying, placing and fixing of 10 numbers Godrej make Sally Mid Back Chair with wide back rest and arm rest, adjustable lumbar support, Ergonomic seat cushion of dimension of 756mm(W) x 885mm to 985mm(H) x 756mm(D) with wheels and upholstery knitted fabric and glass filled polyprpylene and as per direction of Engineer-in-charge
10
4653
46530
Supplying, placing and fixing of 43" 4K LED Smart TV of make LG/Sony/Samsung with Gen5 AI processor 4K with AI brightness and 4K upscaling, magic remote, film maker mode, AI sound system, smart web OS platform, with OTT Apps supported, ALLM, HGIG mode and as per direction of Engineer-in-charge.
1
28814
28814
Supplying, placing and fixing of Godrej make metal rectangular office table with 5 drawers storage, particle board table top material suitable for office of dimensions Dimensions W x H x D (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of Engineer-in-charge
1
23945
23945
Supplying, placing and fixing of Godrej or Durian make L shaped help desk with a flat linear table top in maple with dark grey sides, with computer tray, computer trolley and 3 drawers of varying proportion with a central locking mechnaism of size: Table Top: 1500'(L)x600'(W)x750(H), Side unit: 900'(L)x450(W)x750(H), and as per direction of Engineer-in-charge
1
25847
25847
Supplying, placing and fixing of Godrej make Brawn 6 seater Dining table set with Tempered Glass Top of size 1349mm(L)x749mm(H)x800mm(W) of rectangular shaped with 6 M.S chairs of size 450mmx988mmx518mm with leather upholstery and cushion including cost of all materials and as per direction of Engineer-in-charge
1
56381
56381
Supplying and placing of Nilkamal MAGIC IRON BLACK plastic chair with arm rest stackable texture finish 1 seater of dimesnions 570 (W) 607(D) 900 (H)and as per direction of Engineer-in-charge
20
932
18640
Supplying, placing and installing White And Gray Godrej Glass double Door Storwel Almirah/ Bookshelf of Iron and glass material with Brass levers lock, handles , standard grade enamel paint coating is oven dried under controlled temperature to avert damaging effects of scratch, ccessible with 10 types of separate lockers, of dimesnions 914 mm (W), 320 mm (D), 947 mm (H), and as per the direction of Engineer-in-charge
1
21610
21610
Supplying, placing and installing high quality engineered wood Godrej make Vurv Queen Size Bed of Dimensions W x H x D (mm) 1584 x 880 x 2135 and as per direction of Engineer-in-charge
1
18636
18636
Supplying, placing and installing high quality Kurl-on/ sleepwell make mattress of 78"x60"x5" pure coir Str 8 with 2 set polyster fibre pillows of 600 mmX 400 mm and as per direction of Engineer-in-charge
1
10372
10372
Supplying, placing and installing Godrej make, 4 full Shelves Iron Office Cupboard - Godrej Minor Plain of dimensions 765 mm (W) x 440 mm (D) x 1270 mm (H), 3 hinged double door Powder coated CRCA Sheet, and 3 Way bolting device and 6 lever lock safety, CRCA steel certified as per direction of Engineer-in-charge
1
17097
17097
Supplying, placing and installing Nilkamal Magna 15 Personal Locker of dimensions Width (mm) 905, Depth (mm) 400, Height (mm) 1850, Door made of 0.8 mm thick (22 Gauge) Powder coated CRCA Sheet, Body, Back & Shelves made of 0.6 mm thick (24 Gauge) Powder coated CRCA sheet, Locking facility available with a duplicate key Total 15 numbers of individual lockers, as per direction of Engineer-in-charge
1
22458
22458
Supplying, placing and installing Regular Steel (Magnetic) Whiteboard for Office, Home & School , Lightweight Aluminium Frame, Resin Coated Steel Writing Surface, Alloy Aluminium (6063-T6 Frame), Paper Honeycomb Core & Virgin ABS Corners 3x4 Feet, with Alloy Steel Folding Easel Stand 5 feet for White Board (Can Hold Upto 3X4 Feet Whiteboards) with dimension 600D x 900W x 1500H mm as direction of Engineer-in-charge
1
3601
3601
Supplying, placing and installing Kent R/O+UV standalone Water Purifier System (Kent, Model Cristal Plus), 11 L Storage capacity, Multiple purification by RO+UF+TDS controller, UV LED protection in storage tank and all other ancillary works
1
16525
16525
Supplying, placing and installing and all other ancillary works for SITC of ISI marked (IS:2878) Fire Extinguisher, ABC type capacity 6 Kg. with all accessories. (Eversafe/Fire Shield)
4
1822
7288
Supplying, placing and installing metal body high accuracy electronic weighing balance machine of 20KG capacity with Front and Pole Double Display (Red) SS weighing pan and poer back up features
1
2652
2652
Supply, installation and commissioning of CCTV cameras with follwing items: a) Cat6 outdoor/ indoor cable make Dlink/cp cplu/ digisol of necessary quantity
b) CP PLUS 8MP IR Network Bullet Outdoor Camera|3.6mm Lens |Max. 8MP (3840 × 2160)@15fps |IR Range of 30 Mtrs, IP67, PoE |DWDR, Day/Night(ICR) and Support Built-in Mic - CP-UNC-TA81L3C (6 nos.)
c) CP PLUS PTZ Camera 4K Outdoor/Indoor Speed Dome 100 Mtr. CP-UNP-D2521L10-DP Compatible with J.K.Vision BNC (1 no.)
d) CP Plus 4mp IP Dome 3.6mm CP-UNC-DS41ML3- indoor (2 nos.)
e) TP-Link VIGI NVR1016H VIGI 16 Channel Network Video Recorder | H.265+ | 24/7 Continuous Recording | Real-Time Live View | Remote Monitoring | ONVIF | Two-Way Audio CCTV (1 no.)
f) LG 22 inch (55cm) IPS Monitor - Full HD, IPS Panel with VGA, HDMI, DVI, Audio Out Ports - 22MP68VQ (1 no.) all other ancillary works and accessories including fittings Demo of the system as per direction of Engineer-in-charge
1
97458
97458
Supply, installation and commissioning of All-in-One 12th Gen Intel Core i7-27inch(68.6 cm) 16GB RAM/1TB SSD/FHD/Intel UHD Graphics/B&O Audio/Camera/Keyboard/Mouse/Widows 11OS/Licensed MS Office facility of HP/DELL or equivalent type of approved make Personal Computer system and all other ancillary works and accessories including Demo of the system as per direction of Engineer-in-charge
1
60161
60161
Supply, installation of Nilkamal Freedom Mini 18 (FMSC18) Plastic Shoe Cabinet - Sandy Brown/Dark Brown, of dimension Width (mm) 595, Depth (mm) 355, Height (mm) 1230, as per of Engineer-in-charge
2
4178
8356
Supply, installation and commissioning of color laser printer and b/w printer cum xerox and scanner of of HP/Cannon/Epson make printer system and all other ancillary works and accessories, connectivity including Demo of the system as per direction of Engineer-in-charge
1
13979
13979
Supply, installation of Havells make 8W bamboo landscape light LED IP65 Luminaire, 1 metre height with switching system etc.and all other ancillary works as per direction of Engineer-in-charge
25
5936
148400
Laying of one number PVC insulated and PVC seathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25 sqmm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
100
379
37998
Supply, installation of Adjustable Waterproof Outdoor Garden LED Spot Light of 5 Watt, Warm White, Yellow, Green, Red-Metal body with internal underground wiring, switching system etc.and all other ancillary works in park & gym premise as per direction of Engineer-in-charge
5
847
4235
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm with lock gate facility in park and Gym area as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
50
2509
125450
SIGNAGES
Supply, installation of Stainless body frame acrylic, high visibility, weather resistant square display board with fixing in concrete base and all other ancilliary works and fittings with size 3' x 2' as per direction of Engineer-in-charge Total no. 4 nos.
24
1300
31200
Supply, installation of Stainless sign boards of high quality vinyl boanded gloss laminated multi colour ( Blue, Green - White) wall mounted rectangular shape of 1.5' x 1.5' having thickness of 3 mm with appropriate signage and all other ancillary works and fittings as per direction of Engineer-in-charge . Total 10 nos.
22.5
1300
29250
Supply, installation of Stainless sign boards of high quality vinyl boanded gloss laminated multi colour ( Blue, Green - White) wall mounted rectangular shape of 1.5' x 1' having thickness of 3 mm with appropriate signage and all other ancillary works and fittings as per direction of Engineer-in-charge . Total 5 nos.
7.5
1300
9750
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%