GAIL India Limited Tender
... More
The GAIL has issued a formal invitation for competitive bids for the GAIL India Limited project, for Amc Of Civil Work Of Various Stations Under Dapl And Bapl Odisha Region For 02 Years in Bhubaneswar, Odisha, with an estimated contract value of Rs. 3,31,27,027. The bid opening date for this tender is 23-05-2025 and the last date for bid submission is 13-06-2025. Interested bidders for GAIL India Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
GAIL India Limited - GAIL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date23 May 2025
Closing Soon13 Jun 2025
Tender Amount₹ 3,31,27,027
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
Class-I Bidders, Class I Local supplier
Technical Capacity
... View More
The bidder must submit a copy of the Order/LOA/Contract along with its SOR, which has been executed towards the nature of jobs, in the previous seven years. The Completion Certificate or equivalent must contain detailed information, including the actual value of completed work. For running contracts, the Execution Certificate must clearly mention the executed value till one day prior to unpriced bid opening, which must be equal to or more than the minimum prescribed value. The experience acquired as a sub-contractor can be accepted against submission of a certificate from the end-user, along with other specified documents. However, the experience acquired for Project Management Consultancy (PMC) cannot be considered for qualifying the experience. No specific percentage of similar works completed is mentioned. The value of the work is not explicitly stated as a percentage, but rather as a requirement to meet the minimum prescribed value. In terms of specific values, the Average Annual Financial Turnover during the preceding three financial years should be not less than the value mentioned, which is Rs. 45.5 Lakhs for Part A and Rs. 37.2 lakhs for Part B. The Minimum Working Capital of the bidder should be not less than the value mentioned, which is Rs. 9.1 lakhs for Part A and Rs. 7.4 lakhs for Part B. For the technical BEC, the bidder must provide a copy of the Work Order/Contract with a detailed Scope of Work and Schedule of rates (SOR), as well as a Completion/Execution Certificate issued by the end-user/owner or their consultant. This certificate should include the reference of the relevant Work Order/Agreement/Contract, the actual value of the completed/ executed work, the actual date of completion of work, and the full address of the Client/Officer issuing the Certificate. The documents in support of the technical criteria must be duly certified by a Chartered Engineer and attested by a Notary Public with a legible stamp. In terms of financial requirements, the bidder must have an average annual turnover, with audited financial statements submitted for the preceding three audited financial years. The bidder must also have a net worth, with audited financial statements submitted for the last audited financial year. If the bidder's working capital is negative or inadequate, they must submit a letter from their bank confirming the availability of a line of credit for at least the working capital requirement. However, for startups, prior turnover and prior experience are not required if they meet the quality and technical specifications specified in the Tender Document, and their domain is registered for construction and engineering. A specific value or percentage of similar works completed is not mentioned, except that if any bidder does not quote for any item(s) of “Schedule of Rates” and the estimated price impact is more than 10% of the quoted price, then the bid will be rejected. If such price impact of unquoted items is 10% or less of his quoted price, then the unquoted item(s) shall be loaded with the highest price quoted by the other bidders.
Costs
EMD
₹ 5,62,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Amc Of Civil Work Of Various Stations Under Dapl And Bapl Odisha Region For 02 Years
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_GAIL_236108_1Tender No
GAIL/BBSR/CnP/25-26/09Tender Authority
GAIL India Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
105
700
-
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.
525
34
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
105
2123
-
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
525
8
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (Zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
105
7878
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (Zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources).
105
6812
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :-
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
42
9045
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.
105
392
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level & upto plinth level. Cold twisted bars/ Hot rolled deformed bars & Thermo-Mechanically Treated bars of grade Fe-500D or more.
1050
107
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:4 (1 cement : 4 coarse sand).
21
7370
-
... More
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand).
21
9333
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red: Area of slab over 0.50 sqm.
10.5
5136
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.
105
510
-
... More
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
42
506
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
42
1267
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1050
133
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in-Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile.
42
1738
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in-Charge. In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile.
21
1884
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.
42
1948
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
21
2354
-
... More
Providing and laying Ceramic glazed/ matt floor tiles of any size as approved by the Engineer-in-Charge (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment, etc. complete.
42
1096
-
... More
Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge.
210
954
-
... More
Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size.
Size of Tile 600x600 mm.
42
1453
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), including filling/ grouting and finishing complete as per direction of the Engineer-in-Charge. Size of Tile 600x600 mm or less.
420
309
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion: (i) Single socketed pipes : 75 mm diameter
126
248
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion: (i) Single socketed pipes :110 mm diameter
126
377
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion Coupler : 75 mm
42
91
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion Coupler : 110 mm
42
136
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :Single Pushfit Coupler : 75 mm
42
93
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :Single Pushfit Coupler : 110 mm
42
127
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : Single Tee with door : 75 mm
42
164
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : Single Tee with door : 110 mm
42
234
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :Single Tee without door : 75mm
42
144
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion Single Tee without door : 75mm
42
221
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansionBend 87.5 Degrees : 75mm
42
105
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion Bend 87.5 Degrees : 110mm
42
150
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : Shoe (Plain) : 75mm
42
93
-
... More
Providing and fixing on wall face Unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : Shoe (Plain) : 110 mm
42
131
-
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS:10192 and IS:12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. : 2 mm thick flat.
105
1245
-
... More
12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand).
(Note :- Rates for external plaster are for height upto 10m from ground level unless otherwise stated.)
420
357
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 coarse sand).
(Note :- Rates for external plaster are for height upto 10m from ground level unless otherwise stated.)
420
411
-
... More
Neat cement punning (Note :- Rates for external plaster are for height upto 10m from ground level unless otherwise stated.)
210
79
-
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand).
(Note :- Rates for external plaster are for height upto 10m from ground level unless otherwise stated.)
105
300
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. One or more coats on old work.
15406
62
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/10 sqm).
49124
131
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
1050
226
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
2100
102
-
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work.
580
96
-
... More
Lettering with black Japan paint of approved brand and manufacture. (Note:- Payment shall be made on per letter per cm height basis).
10500
6
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1050
262
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of the Engineer-in-Charge. With cement mortar 1:4 (1 cement:4 coarse sand).
105
560
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of the Engineer-in-Charge. Note: This item includes the following:
(1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
21
2434
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. Note: This item includes the following:
(1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/barricades around the work area shall be done prior to dismantling operations.
(3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.
10.5
3551
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. Note: This item includes the following:
(1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.
In cement mortar.
42
2060
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Note: The item is including of dismantling of wall cladding/tiles wherever present with the plaster.
1050
54
-
... More
Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge.
105
56
-
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved.
105
263
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
210
972
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
10.5
10117
-
... More
Providing and fixing G.I. chain link fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm.
42
1017
-
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
525
131
-
... More
Laying old existing cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost).
210
402
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.
6
6515
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back Wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
6
1879
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
21
1083
-
... More
Providing and fixing Semi Rigid PVC waste pipe for sink and wash basin including PVC waste fittings complete. 32 mm dia
84
103
-
... More
Providing and fixing Semi Rigid PVC waste pipe for sink and wash basin including PVC waste fittings complete. 40 mm dia
84
116
-
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White.
21
1190
-
... More
Providing & fixing C.P.brass toilet paper holder of standard size.
21
803
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. Internal Work - Exposed on wall: 15 mm nominal dia pipes
252
286
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. Internal Work - Exposed on wall: 20 mm nominal dia pipes
378
335
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. Internal Work - Exposed on wall: 25 mm nominal dia pipes
504
401
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. Internal Work - Exposed on wall: 32 mm nominal dia pipes
252
518
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. External work: 15 mm nominal dia pipes
252
244
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. External work: 20 mm nominal dia pipes
378
274
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. External work: 25 mm nominal dia pipes
504
355
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge. External work: 32 mm nominal dia pipes
252
438
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
11
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including cutting, threading trenching and refilling etc. : 25 mm nominal outer dia pipes
126
467
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including cutting, threading trenching and refilling etc. : 50 mm nominal outer dia pipes
63
762
-
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 15 mm nominal bore
42
406
-
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 25 mm nominal bore
42
464
-
... More
Providing and fixing Un-plasticised PVC (UPVC) connection pipe with brass unions: 30 cm length : 15 mm nominal bore
42
85
-
... More
Providing and fixing Un-plasticised PVC (UPVC) connection pipe with brass unions: 45 cm length : 15 mm nominal bore
42
97
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.
42
506
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.
42
798
-
... More
Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of the Engineer-In-Charge.
42
74
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931-15 mm nominal bore.
42
574
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.
42
2823
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade-l Type-ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. Brass/ Stainless Steel screws etc. complete as per architectural drawings and directions of the Engineer-In-Charge. Pre-laminated particle board with decorative lamination on both sides.
42
1115
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In- Charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.00 mm thickness.
42
1505
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
42
983
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 x10 mm.
42
82
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm.
42
66
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper.
42
72
-
... More
Providing and fixing brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
42
528
-
... More
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
210
563
-
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12mm mild steel U-beading.
42
939
-
... More
Cleaning of terrace/ loft water storage tank (inside surface area) of any capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contractor at his own cost and nothing extra will be paid on this account). Frequency of cleaning will be 06 months.
84000
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm.
8
1361
-
... More
Hiring services of skilled manpower on call basis (Plumber/Fitter/Carpenter/Mason etc.)
105
1217
-
... More
Hiring services of un-skilled manpower on call basis (Labor, Beldar, Coolie etc.)
105
998
-
... More
Provision for supply of Material/Machinery/Manpower as listed in DSR 2023: Volume 01 page nos. 03-78, 81-88 & 99. Note: The payment shall be made on the basis of executed work, by adding @15% (for Contractor profit, overhead & carriage of materials) on DSR 2023 basic rates + GST and then by considering the percentage above(+) or below(-) quoted by the bidder.
743400
1
-
... More
Provison for items which are not available in SL No. 1.01 to 2.05 (above). Note:
1) This line item will execute if some unforseen items/requirements will arise during execution of contract which are not covered in line item nos. 01 to 80 above and such unforeseen items are available in DSR 2023 (Vol-I & Vol-II). 2) The item will be operated for smooth functioning as per site condition/ operational safety requirements of the Plant and payment shall be made as per DSR 2023 incl. GST (Vol-I & Vol-II) rates by considering the percentage above(+) or below(-) quoted by the bidder.
1486800
1
-
... More
Providing and fixing C.P. brass two in one bib cock: jaquar catalouge no. KUP-CHR-35041PM or approved equivalent.
42
1770
-
... More
Providing & fixing of CP brass Health Faucets: jaquar catalouge no. ALD-CHR-583 or approved equivalent.
42
1298
-
... More
Providing and fixing C.P. brass waste coupling for wash basin and sink: jaquar catalouge no. ALD-CHR-705 or approved equivalent.
42
696
-
... More
Repair of aluminium door (any size): Repair & maintenance of aluminium doors (any size) for smooth opening & closing of door including replacement of missing aluminium round shape or tubular handle, renewing rubber / neoprene gasket, missing screws etc. Any other required item to be brought & replaced will be paid separately.
42
3084
-
... More
Repair & maintenance of aluminium window: Repair & maintenance of aluminium windows for smooth opening & closing of window including replacement of defective hinges, missing aluminium handles, renewing rubber / neoprene gasket, missing screws etc. Any other required item to be brought & replaced will be paid separately.
42
771
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%