Forest Environment And Climate Change Department Tender

R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. (i)Column Base & Footing

(ii)Grade Beam

(iii)Lintel

(iii)Column in Super Structure

(v)Wall beam

(vi)Chajja

(vii)Selves

(viii)Roof slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in FOUNDATION, PLINTH AND BASEMENT and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.

Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.

Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.

Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.

Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge.

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, made out of M.S Square bar/ flat as per approved drawing and design including priming with red oxide primer making holes in walls and R.C.C structure, wood work etc., and making good to the damages to walls with cement concrete (1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) of approved quality with cost of all materials, labour, cost of welding, all T&P, sundries etc. complete in all respect as per specification & direction of the EI.C. (Screws & other hardware required materials to be used in the work shall be of approved quality & specification & shall have to be supplied by the contractor at his own cost.)

Providing, fitting & fixing of dressed seasoned Sal wood work for framed doors & windows including fixing the same with required hardware fittings with cost, conveyances, taxes of all materials, cost of all labour with T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.

Supplying, fitting & fixing of Piasal wood paneled shutters (32mm style & 18mm panel) of approved quality including fixing the same in proper position with required hard ware fittings, hinges, cleats etc. including cost, conveyance, taxes of all materials and cost of all labour with T&P required for the work etc. complete.

Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.

Painting two coats with approved synthetic enamel paints of approved colour, shade to new wood & iron work over a coat of wood primer & red oxide primer respectively including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Wall Painting Two Coats With Plastic Imulsion Paint over a coat of wall primer including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge.

Finishing wall surface with Cement puttyincluding cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge.

Providing, fitting and fixing of GRANITE TILES of size above 0.10 sqm and up to 0.40Sqm. size of approved quality & shade laid over 25mm thick cement mortar of prop. (1:1) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of tile including watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge.

Providing fitting & fixing WPC door with frame of approved quality including cost, conveyances, taxes of all Materials, cost of all labour & T&P etc. required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge.

Earth work in filling in foundation and plinth with excavated earth deposited at worksite including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete as per direction of Engineer-in-charge.

2.5 cm thickgrading concrete (1:2:2) on roof slab with 6 mm isize hgcb chips including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges.