Forest Environment And Climate Change Department Tender

R.R.H.G. stone masonry in C.M. (1:4) in foundation and plinth using hard granite stone boulders not less than 0.025 cum picked up including cost, conveyance, royalty, taxes of all materials with all labour, T&P required etc. complete as per direction of the of E.I.C.

Reinforced Cement concrete M-20 Grade with crushed granite coarse aggregarate 20mm down graded of approved quality mixed by concrete mixer and placing manually,compacting with vibrators including cost of all materials, labour charges and transportion of materials within a lead of 1.0km. by mechanical means and placement within initial lead of 50m and initial lift of 1.50m for mixed concrete complete as directed by Engineer in charge. (A/R P/50 item 4) A) Coloumn base

B)Plinth Bend

C) Lintel Band

D) Coloumn & Beam

E) For roof slab

f) CHAJJA

Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C.

Brick work with fly ash bricks 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation /superstructure.

16mm thick cement plaster (1:6),finished smooth to brick work after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C.

12mm thick cement plaster (1:6) for brick work after racking out joints incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C..

Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified tile of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified tile in Dadoo Skriting in all floors of of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.

Supplying and fitting-fbxing of Un-plasticised.Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Casement Door 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outler frames, 102 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, struclurally reinforced with hot dip galvanised up to 50 microns of minimum thickness'of 1.5 mm prefabricaled & welded through fusion welding the window sash shall be fited with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fxed wth EPOM, wealhering seal resistant accessories like clipping, Jocking systemto be installed at the top of silicon base rubber sealant, easy glazing & deglazlng at site etc. including Cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTMD 638-14,EN-477-95 and other applicable codes and stàndards. As per no B-I- (H.E)(WB)-01/2018, Lt No. 16100, Dated - 08.05.2020 including cost, carriage, taxes of all materials and labour etc. complete and as per direction of the Engineer-in-Charge.

Supplying and fitting-fbxing of Un-plasticised.Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Sliding Window with TOP fixed - 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outler frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, struclurally reinforced with hot dip galvanised up to 50 microns of minimum thickness'of 1.5 mm prefabricaled & welded through fusion welding the window sash shall be fited with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fxed wth EPOM, wealhering seal resistant accessories like clipping, Jocking systemto be installed at the top of silicon base rubber sealant, easy glazing & deglazlng at site etc. including Cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTMD 638-14,EN-477-95 and other applicable codes and stàndards. As per no B-I- (H.E)(WB)-01/2018, Lt No. 16100, Dated - 08.05.2020 including cost, carriage, taxes of all materials and labour etc. complete and as per direction of the Engineer-in-Charge.

Supplying and fitting-fbxing of Un-plasticised.Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/Top Hung 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outler frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, struclurally reinforced with hot dip galvanised up to 50 microns of minimum thickness'of 1.5 mm prefabricaled & welded through fusion welding the window sash shall be fited with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fxed wth EPOM, wealhering seal resistant accessories like clipping, Jocking systemto be installed at the top of silicon base rubber sealant, easy glazing & deglazlng at site etc. including Cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTMD 638-14,EN-477-95 and other applicable codes and stàndards. As per no B-I- (H.E)(WB)-01/2018, Lt No. 16100, Dated - 08.05.2020 including cost, carriage, taxes of all materials and labour etc. complete and as per direction of the Engineer-in-Charge.

Distempering Two coats to walls with distemper of approved shade on prepared surface of new works over a coat of primer to give a even shade with cost conveyance royalties and taxes of all the materials and all labour with T&P required for the work etc. (Including cost of distemper) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Providing two coats with Weather coat paint on plaster surface of approved shade on new works over a coat of primer to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.

Providing fitting fixing of MS Grill/MS Gate with cost, conveyance, labour and T&P etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.

Supplying fitting fixing of Water connection & PH Works 5%

Supplying fitting fixing of Installation of Electrification works 5%