Forest Environment And Climate Change Department Tender

R.C.C.work M-20 using 12mm and 20mm size hard granite crusher broken chips etc. complete.

column base & footing

Plinth Bend

Column

Lintel

Chajja

Shelves

Wall Beam

Roof slab

Supplying, fitting & pllacing uncoated HYSD / TMT bar reinfacement complete as per drawing & technical specification.

Brick work with Fly ash bricks, 23cm x 11cm x 8cm size having crushing strength not less than 75 kg/Cm2 with dimentional tolerance +8% in cement mortar (1:6) in Foundation & plith

Brick work with Fly ash bricks, 23cm x 11cm x 8cm size having crushing strength not less than 75 kg/Cm2 with dimentional tolerance +8% in cement mortar (1:6) in super structure

12 mm thick cement plaster (1:6) over brick work including cost, carriage, royalties and taxes of all materials etc. complete .

16 mm thick cement plaster (1:6) for brick work including cost, carriage, royalties and taxes of all materials etc. complete .

6mm thick cement plaster in C.M. (1:4) to Rcc surface finished smooth including closed deep chipping & slurry treatment with all cost of conveyance, scaffolding, royalities & taxes of all materials, labour, and T&P etc complete

Supplying of M.S Doors, Window with grills, Grills,Collapsible gates made out of M.S Angle frame, M.s Flat Sheet etc. of approved section and design, electrically welded properly with all necessary locking arrangement and one coat redoxide primer including cost of all materials, labour, T&P, carriage of materials to site etc. complete as per the direction of the Engineer-in-charge.

Supplying, fitting and fixing vertified tile in floors of size 600mm x 600mm ( Coloured or Printed ) of approved make laid on 20mm thick cement mortor (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work.

Fixing tiles in dados skiring and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including cost of ceramic wall tiles of approved shade

Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade including smoothening the surface by sand paper and filler etc complete with cost, conveyance, royalty, taxes of all materials, labours T&P required as per specification and direction of Engineer-in-charge.

Distempering two coats to walls with distemper of approved shade with one coat of primer as per the direction of the Engineer-in-charge.

Wall painting two coats with weather coat with approved paint including one coat of primer as per the direction of the Engineer-in-charge.

Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour T&P etc. complete.

Supplying, fitting, &fixing of P.V.C. door shutter with choukath including fitting, fixing of Almunium aldrop, tower bolt, door handle,hinges etc. complete

P.H WORK Add for P.H Work(Supplying all materials, labour with T&P for Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification (excluding cost of Earth Work in trenches) Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) Supplying and Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete. Supplying and Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. - 25mm dia Get Valve Supplying and Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge - 1000 Ltr PVC Tank)

E.I WORK Add for E.I Work on LS(Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front Bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ L&T/ Anchor/Havells/V Guard).Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, hosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 2 + 4 WAY Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required including Luminous 1100VA inverter with 200Ah Luminous battery