Forest Environment And Climate Change Department Tender

Cement concrete (1:2:4)with 12mm size hard broken granite chips per 1cum

Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) including cost, conveyance, royalty, T&P etc. complete as per direction of the Engineer in charge.

Ground floor

1st floor

CC (1:1.5:3)using 12mm chips of RCC work with all cost conveyance, of materials and frame work but excluding cost of steel.

Column base & Plinth band

Plinth band

Column & beam

For 1st floor

For 2nd floor

For 3rd floor

Lintel Bend

Chajja

Roof slab

1st floor

2nd floor

3rd floor

Stair case

1st floor

2nd floor

Straightening cutting bending binding MS and TS rods including tying the grills

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles ( VETRIFIED TILES )

2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size hand broken granites chips.

Ground floor

1st floor

2nd floor

Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.( Ceramic wall Tiles )

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm.

3rd floor

12mm thick cement plaster (1 : 4) over brick work with cement punning for skirting per 1 Sqm.

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment.

Ground floor (Roof slab)

1st floor

2nd floor

3rd floor

16 mm. Thick cement plaster (1 :6) over brick work including cost, conveyance and royalty etc. complete.

Ground floor

1st floor

12mm thick CP in CM (1:6) including cost conveyance royalty of all materials

Ground floor

1st floor

Providing, fixing and fitting of M.S. doors shutter frame, windows frame, shutter with grill gate etc. complete including cost, conveyance, T&P and all taxes of all materials etc. complete as per the direction of the Engineer-in-charge.

Supplying, fitting & fixing of RCC ventilator etc. complete

Supplying, fitting, fixing fully glazed aluminum framed openable doors using 15 micron anodized OEL aluminum section 2082 as out section,9139 as mullion section,4124 as a shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading, friction stay and handle etc with 5mm black glass.

Painting two coats over a coat of primer on new iron works with any approved paint including cost of paint and primer etc. complete as directed by the Engineer-in-charge.

Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade inculding cost of paint

Finishing walls surface of walls with Acrylic wall putty (water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials,taxes, labour T&P etc. complete as per direction of the Engineer-in-charge.

Ground floor

Wall painting two coats with any approved quality of Weather seal coat over a coat of priming on new work to give an even shade including cost of all materials, labour, T&p required for the work complete.

Cement washing two coats per 1 Sqm

Supplying, fitting afixing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware)

Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.

Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.

2nos toilet & 2nos bath room to all pipe fittings etc. Complete

Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete.dware]

Supplying fitting & fixing connection pipe 4" dia chamber to tank to all fittings etc. Complete as per direction of the Engineer in charge.

Supplying fitting & fixing Comered to all fittings etc. Complete as per direction of the Engineer in charge.

Supplying fitting & fixing of water tank 500 lit. capacity etc. Complete as per direction of the Engineer in charge.

EI Work Add for E.I Work on LS(Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front Bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ L&T/ Anchor/Havells/V Guard).Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, hosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 2 + 4 WAY Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required including Luminous 1100VA inverter with 200Ah Luminous battery

Add for signage