Food Corporation Of India Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Food Corporation Of India - FCI Tender
Civil And Construction
Road Construction
Eprocure
Opening Date16 Jan 2025
Closing DateCancelled
Tender Amount₹ 5,36,02,575
Technical
Technical
Bid Capacity
... View More
The bid capacity required in the given tender is mentioned as having a registration limit equal to or more than the estimated cost put to tender. For the first scenario, the estimated cost put to tender is 4,74,81,866.00. Thus, the bid capacity required is at least 4,74,81,866.00. In another scenario, the estimated cost put to tender is Rs. 5,36,02,575/-. Therefore, the bid capacity required is: Registration limit ≥ Rs. 5,36,02,575/-. Additionally, for similar works, the bid capacity required in terms of value is:
- At least three similar works with each work valued at not less than Rs. 2,14,41,030, or
- At least two similar works with each work valued at not less than Rs. 3,21,61,545, or
- At least one similar work valued at not less than Rs. 4,28,82,060. Formulas for calculating the bid capacity based on similar works are:
1. 40% of the estimated cost for three similar works: 0.4 * estimated cost
2. 60% of the estimated cost for two similar works: 0.6 * estimated cost
3. 80% of the estimated cost for one similar work: 0.8 * estimated cost These formulas are applied to the estimated cost of Rs. 5,36,02,575/- to determine the specific bid capacity required for similar works.
Technical Capacity
... View More
The bidder should have prior work experience in similar works, which is defined as related to building and road works. The value of CC road work components, such as GSB, DLC, and Pavement Quality concrete, should be at least 40% of the estimated cost in case of three works, 60% of the estimated cost in case of two works, and 80% of the estimated cost in case of one work. The estimated cost of the tender is 4,74,81,866.00. This implies that the bidder should have experience in works where the value of CC road work components is not less than the specified percentage of the estimated cost, but no specific amount or percentage of similar works completed is mentioned.
Costs
EMD
₹ 10,72,060Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_FCI_844385_2Bid Award Id
ViewTender No
NIT- 11/2024-25Tender Authority
Food Corporation Of India ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25
1415
2924
4138662.75
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means , including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
6990
263
1845010.5
... More
Note for Sl 13:
1. Cement content considered is @ 390 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
2. It is the responsibility of the contractor to bring and use appropriate Batch mixing plant to the construction site for production of concrete and the quoted rate shall include the expenditure towards the same.
3. It is also the responsibility of the contractor to carry out the Design Mix of Cement Concrete as per the specification above from a Govt. Engineering College and get it approved from FCI. The quoted rate shall include the fees of for carrying out the design mix charged by Government Engineering College, cost of material required to carry out the Design Mix and other incidental expenditures.
4. Dowel bars, Tie bars and Sleeve (Plastic sheeting) shall be paid under respective items.
Table A: Aggregate Gradation for Pavement Quality Concrete. (Combined Gradation of fine and coarse aggregates) Sieve Designation Percentage by weight passing the sieve 31.5 mm 100 26.5 mm 85-95 19.0 mm 68-88 9.5 mm 45-65 4.75 mm 30-55 600 micron 8-30 150 micron 5-15 75 micron 0-5
-
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
20
226
4525
... More
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
1021
300
306759.45
... More
Neat cement punning.
3070
79
245446.5
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Using grade 'A' sealing compound conforming to IS: 1834.
31698
8
274187.7
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
12.5
196
2450
... More
Credit for salvage value of brick bats as and where is basis and as per direction of engineer in charge.
54
-746
-40332.6
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
54
2060
111250.8
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
32651.2
107
3496943.52
... More
Providing and laying of separation Membrane of impermeable plastic sheeting 125 micron thick.
9440
24
231280
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
134.77
6812
918053.24
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 Coarse sand)
360.5
7370
2657119.33
... More
Quote rate for excess/less cement per kg as per design mix for payment/ recovery as per item no. 13 Rate ### (### Rate should be same as rate of 1 kg cement adopted in Pavement Quality Concrete).
1
5
5.15
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade
9440
121
1147243.2
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
133
26740
... More
Credit for salvage value of stone aggregates obtained from WBM layer as and where is basis and as per direction of engineer in charge
1120
-1840
-2061136
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
2049
333
683034.15
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
11
7780
85583.3
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
20
1503
30072
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
7307.6
107
788124.66
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
56.4
2434
137291.7
... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC 43 grade cement, coarse and fine aggregate satisfying Table: A below, conforming to IS 383, maximum size of coarse aggregate 31.5mm nominal size mixed in a batching and mixing plant/machine as per approved Mix design to achieve required design mix grade of controlled concrete including transporting/pumping, laying, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, admixtures (IS : 9103 & IS : 6925) etc. with flexural strength minimum 4.5 MPa complete all as per direction of Engineer-in-charge including providing dowel bars with sleeve and tie bars wherever required (Item of joint fillers, sealants, dowel bars with sleeve and tie bars to be paid separately).
2548.3
11167
28458140.25
... More
Credit for salvage value for Iron scrap as and where is basis and as per direction of engineer in charge.(for title information board)
300
-23
-7080
... More
Providing and laying Non Pressure NP-2 class (Light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia RCC pipes.
330
556
183628.5
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
58.2
9045
526462.65
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, coarse aggregate not exceeding 26.5 mm nominal size, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table: B below, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined by trial during construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge.
Table B : Aggregate Gradation for Dry Lean Concrete Sieve Designation Percentage by weight passing the sieve 26.50 mm 100 19.0 mm 75-95 9.50 mm 50-70 4.75 mm 30-55 2.36 mm 17-42 600 micron 8-22 300 micron 7-17 150 micron 2-12 75 micron 0-10
1416
4148
5874488.4
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
134.77
2123
286217.79
... More
Re-lettering with black Japan paint of approved brand and manufacture.
3000
3
11550
... More
Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
291.2
842
245336
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements