Food Corporation Of India Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required can be calculated based on the estimated cost and the definition of similar works. For one work: 80% of the estimated cost, For two works: 60% of the estimated cost, For three works: 40% of the estimated cost. Given the estimated cost is Rs. 4,68,70,567/-, the bid capacity required can be calculated as follows:
- For one work: 80% of Rs. 4,68,70,567/- = 0.8 * 4,68,70,567 = Rs. 3,74,96,453.60
- For two works: 60% of Rs. 4,68,70,567/- = 0.6 * 4,68,70,567 = Rs. 2,81,22,340.20
- For three works: 40% of Rs. 4,68,70,567/- = 0.4 * 4,68,70,567 = Rs. 1,87,48,226.80 Additionally, the "Appropriate class" means registration limit must be equal to or more than the estimated cost put to tender, which is Rs. 4,68,70,567/-. Therefore, the bid capacity required is at least Rs. 1,87,48,226.80 for three similar works, Rs. 2,81,22,340.20 for two similar works, and Rs. 3,74,96,453.60 for one similar work, with an appropriate class registration limit of Rs. 4,68,70,567/-. The formulas to calculate the required bid capacity are:
- For three similar works: 0.4 * estimated cost
- For two similar works: 0.6 * estimated cost
- For one similar work: 0.8 * estimated cost The values are:
- For three similar works: Rs. 1,87,48,226.80
- For two similar works: Rs. 2,81,22,340.20
- For one similar work: Rs. 3,74,96,453.60
Technical Capacity
... View More
The required prior work experience for the bidder is related to the value of similar works, specifically CC road work components. The similar works should have a value of at least 40% of the estimated cost in case of three works, 60% of the estimated cost in case of two works, and 80% of the estimated cost in case of one work. The similar works considered include the amount of GSB, DLC, and Pavement Quality concrete, but only for CC road works. The specific amounts considered are the amount of GSB, DLC, and Pavement Quality concrete.
Costs
EMD
₹ 9,37,415Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Provision Of Cc Road Along Godowns No. 1, 2, 3, 4, 5 And 6 At Fsd Jagannathpur.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_FCI_845909_2Bid Award Id
ViewTender No
NIT- 12/2024-25Tender Authority
Food Corporation Of India ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
44.72
1503
67240.99
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-incharge. All kinds of soil
4916
177
872590
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means , including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
5987
263
1580268.65
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade
7589
121
922291.17
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25
1138
2924
3328479.3
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, coarse aggregate not exceeding 26.5 mm nominal size, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table: B below, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined by trial during construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge.
Table B : Aggregate Gradation for Dry Lean Concrete Sieve Designation Percentage by weight passing the sieve 26.50 mm 100 19.0 mm 75-95 9.50 mm 50-70 4.75 mm 30-55 2.36 mm 17-42 600 micron 8-22 300 micron 7-17 150 micron 2-12 75 micron 0-10
1138
4148
4721163.7
... More
Providing and laying of separation Membrane of impermeable plastic sheeting 125 micron thick.
7589
24
185930.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
20364
107
2180984.4
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
6315
107
681072.75
... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC 43 grade cement, coarse and fine aggregate satisfying Table: A below, conforming to IS 383, maximum size of coarse aggregate 31.5mm nominal size mixed in a batching and mixing plant/machine as per approved Mix design to achieve required design mix grade of controlled concrete including transporting/pumping, laying, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, admixtures (IS : 9103 & IS : 6925) etc. with flexural strength minimum 4.5 MPa complete all as per direction of Engineer-in-charge including providing dowel bars with sleeve and tie bars wherever required (Item of joint fillers, sealants, dowel bars with sleeve and tie bars to be paid separately).
2353
11167
26277127.5
... More
Note for Sl 13:
1. Cement content considered is @ 390 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
2. It is the responsibility of the contractor to bring and use appropriate Batch mixing plant to the construction site for production of concrete and the quoted rate shall include the expenditure towards the same.
3. It is also the responsibility of the contractor to carry out the Design Mix of Cement Concrete as per the specification above from a Govt. Engineering College and get it approved from FCI. The quoted rate shall include the fees of for carrying out the design mix charged by Government Engineering College, cost of material required to carry out the Design Mix and other incidental expenditures.
4. Dowel bars, Tie bars and Sleeve (Plastic sheeting) shall be paid under respective items.
Table A: Aggregate Gradation for Pavement Quality Concrete. (Combined Gradation of fine and coarse aggregates) Sieve Designation Percentage by weight passing the sieve 31.5 mm 100 26.5 mm 85-95 19.0 mm 68-88 9.5 mm 45-65 4.75 mm 30-55 600 micron 8-30 150 micron 5-15 75 micron 0-5
-
-
-
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Using grade 'A' sealing compound conforming to IS: 1834.
27347.1
8
236552.42
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
100
194
19440
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
133
26740
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
20
226
4525
... More
Re-lettering with black Japan paint of approved brand and manufacture.
3000
3
11550
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
105
2123
222993.75
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
105
6812
715260
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
21
7780
163386.3
... More
Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
322
842
271285
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 Coarse sand)
272
7370
2004816.8
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
64
9045
578928
... More
Providing and laying Non Pressure NP-2 class (Light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia RCC pipes.
464
556
258192.8
... More
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
940
300
282423
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
2254
333
751370.9
... More
Neat cement punning.
3194
79
255360.3
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
14
196
2744
... More
Credit for salvage value of stone aggregates obtained from WBM layer as and where is basis and as per direction of engineer in charge
949
-1840
-1746444.7
... More
Credit for salvage value of brick bats as and where is basis and as per direction of engineer in charge.
124
-746
-92615.6
... More
Credit for salvage value for Iron scrap as and where is basis and as per direction of engineer in charge.(for title information board)
300
-23
-7080
... More
Quote rate for excess/less cement per kg as per design mix for payment/ recovery as per item no. 13 Rate ### (### Rate should be same as rate of 1 kg cement adopted in Pavement Quality Concrete).
1
5
5.15
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements