Directorate Of Ports And Inland Water Transport Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 13,50,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Improvement Of Passenger Jetty At Mahesha In Chilika Lake Under Krushnaprasada
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PIWT_103917_1Bid Award Id
ViewTender No
DPIWT-01/2024-25Tender Authority
Directorate Of Ports And Inland Water Transport ViewPurchaser Address
-Website
http://http://ct.odisha.gov.in/content/1/7
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(MAIN JETTY,FINGER JETY,APPROCH JETTY & WAITING HALL)-Boring through all types of soils, boulders, hard starta and rocks etc.. for 400mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)10.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge. Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
3015.2
13568400
4500
(MAIN JETTY,FINGER JETY,APPROCH JETTY & WAITING HALL)-Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 400 mm dia piles as directed by the Engineer-In-Charge.
34.41
96805
2813.3
(MAIN JETTY,FINGER JETY,APPROCH JETTY & WAITING HALL)-Providing and laying reinforced cement concrete in concrete mix M35 for Cast in situ Pile using tremmie method up to cut off level excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
378.71
3570965
9429.3
(MAIN JETTY,FINGER JETY,APPROCH JETTY , WAITING HALL & DIAPHRAGM WALL)-Providing and laying reinforced cement concrete in concrete mix M35 for Precast & Cast in situ Pile, Pile muff & Diaphragm wall excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
164.9
1478892
8968.2
(MAIN JETTY,FINGER JETY,APPROCH JETTY , WAITING HALL & DIAPHRAGM WALL)-Providing and laying reinforced cement concrete in concrete mix M30 for Precast & Insitu Column, Beam, Slab, Staircase, Road & Parapet wall, excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1275.63
11300040
8858.4
(MAIN JETTY,FINGER JETY,APPROCH JETTY , WAITING HALL & DIAPHRAGM WALL)-Fabricating and placing in position of steel reinforcement TMT bars(Fe 550)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile, pile muff, diaphragm wall,Column, Beam, Slab, Staircase & Parapet wal including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M35 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge. (Brand of Steel - SAIL ) Measurement of reinforcement will be made on lengthwise including hooks, if any, separately for different diameter as actually used in work, excluding overlaps, from the length so measured, the weight of reinforcement shall be calcuted in tonnes by multiplying the coefficient per unit length of bar as per code of the respective size of bars used on the basis of wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding & placing shall not be measured as the cost of these items has already been included in the analysis of rates for reinforcement as per rule in force . .
284.73
26750558
93952.1
(INTERNAL ROAD & APPROACH)-Cutting, bending, laying, straightening, cranking and hooking the Tor steel including hoisting and placing in position and binding at each cross-section point with 20BWG binding wires including cost of MS bar/Tor steel and binding wires with cost, conveyance, royality, taxes of all materials, labour, T&P etc. complete required as per specifications & direction of Engineer-in-charge. (Brand of Steel - SAIL ) Measurement of reinforcement will be made on lengthwise including hooks, if any, separately for different diameter as actually used in work, excluding overlaps, from the length so measured, the weight of reinforcement shall be calcuted in tonnes by multiplying the coefficient per unit length of bar as per code of the respective size of bars used on the basis of wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding & placing shall not be measured as the cost of these items has already been included in the analysis of rates for reinforcement as per rule in force . .
13.04
1027606
78780
(FINGER JETTY)-Supplying, handling, transporting and fixing in position of fender with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
144
720000
5000
(FINGER JETTY)-Supplying, handling, transporting and fixing in position of Mooring ring with anchor bolts, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and including all materials, labour, consumable items, machineries, tools, tackles,transportation etc... and complete as per Engineer Incharge.
80
960000
12000
(FINGER JETTY)-Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc. complete as per drawing and specifications as directed by the EIC.
80
960000
12000
(WAITING HALL, INTERNAL ROAD & APPROACH)-Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
2547.89
511361
200.7
(MAIN JETTY,FINGER JETY & APPROCH JETTY )-FROM WORK Supplying and fixing centering and shuttering for Jetty Pile muff, Column & Beam including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
1752.45
8204805
4681.9
(MAIN JETTY,FINGER JETY & APPROCH JETTY )-Supplying and fixing centering and shuttering for Jetty Slab(precast & cast in situ) including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
3203.23
13419301
4189.3
(WAITING HALL)-Providing and fixing centering and shuttering for Building beams, column, slab, chajja, balcony & landing etc. including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
317.4
376721
1186.9
(MAIN JETTY,FINGER JETY,APPROCH JETTY , WAITING HALL & DIAPHRAGM WALL)-Providing and fixing centering and shuttering for Jetty Parapet wall / kerb & Diaphragm wall including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
1758.76
1871672
1064.2
(WAITING HALL)-Providing and fixing centering and shuttering for Building foundation including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
128.45
96887
754.3
(WAITING HALL)-Providing and fixing centering and shuttering for Lintels including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
38.13
21733
570
Providing and fixing centering and shuttering for Drain including strutting, propping, bracing, bolting tie bolt / springcoil / plastic cone, wedging, easing, striking, removal and for coating withapproved mineral shutering oil ( REEBOL of FOSROC / equivalent ) toprevent adhesion etc, complete the work in all respect as directed by the Engineer-in-Charge.
592.8
62777
105.9
(WAITING HALL, INTERNAL ROAD & APPROACH )-Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
1087.66
2435926
2239.6
(WAITING HALL , INTERNAL ROAD & APPROACH)-P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
139.1
1164124
8369
(WAITING HALL)-Brick works with fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or -2% in cement mortar (1:6) in foundation including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
38.36
233001
6074.4
(WAITING HALL)-16 mm thick cement plaster in cement mortor (1:6) over brick masonary with punning including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
229.5
74817
326
(WAITING HALL)-12 mm thick cement plaster in cement mortor (1:6) over brick masonary with punning including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
399.74
129397
323.7
(WAITING HALL)-Supplying,fitting &fixing Vitrified tiles(600mmx600mm) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost and conveyance of all materials and all taxes royalty, labour, labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
57.85
63319
1094.5
(WAITING HALL)-Supplying,fitting & fixing Vitrified tiles in dado/skirting (600mmx600mm) 12 mm thick bed of cement mortar (1:3) (1 cement, 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost and conveyance of all materials and all taxes royalty, labour, labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
5.04
5810
1153.1
(WAITING HALL)-Supplying,fitting &fixing Fixing Fixing Granite tiles in floors, treads or steps and landing on 25 mm thick bed of CM (1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and complete finished in all respect.
2.43
5521
2272.3
(WAITING HALL)-Supplying,fitting &fixing Fixing Fixing Granite tiles in dado on 25 mm thick bed of CM (1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and complete finished in all respect.
1.2
2936
2446.8
(WAITING HALL)-Supplying,fitting & fixing Ceramic tiles in floors on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost and conveyance of all materials and all taxes royalty, labour, labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
18.41
16409
891.5
(WAITING HALL)-Supplying,fitting & fixing Ceramic tiles in dado/skirting on 12mm thick bed of cement mortar (1:3) (1 cement, 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost and conveyance of all materials and all taxes royalty, labour, labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
82.59
95229
1153.1
(WAITING HALL)-Supplying fitting and fixing up window (sliding type) made up aluminium section 9778 as window frame , section no. 4095,4096, and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including cost of materials all taxes labour , t&p including cost of glass etc. complete as per the direction of the Engineer-in-charge.
14.18
88681
6256.2
(WAITING HALL)-Supplying and fixing of UPVC door with OEL anodized AI door section of 9202 as vertical member , 9201 as top member and 9200 middle and bottom member with frame section no 9221and 12mm thick nova pan prelaminated board as pannel fixed by means of tapered clip no. 4660 and frame and frame to be completed by means of jointing angle no. 1855 including cost of all and completeas per the directon of the Engineer-in-Charge.
12.6
124915
9913.9
(WAITING HALL)- Supplying & fittiing up of fixed ventilator/fixed windows / partition walling using OEL aluminum anodized section No.9210 &9207 as single groov and double groov respectively as horizontal &vertical member and OEL section 4660 as Tapered clip for fixing up of 5mm thick black glass and jointing angle No.1855 etc completye as per direction of Engg. in charge.
3.6
28799
7999.8
(WAITING HALL)-Supplying, fitting & fixing of M.S. Grill for doors ,Windows & Ventilators of approved design including cost,conveyance, fabrication charges,labour,T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
14.18
34561
2438.2
(WAITING HALL)-Painting to MS grill with Plastic Enamel paint of approved shade on new work to give an even shade to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
14.18
3589
253.2
(WAITING HALL)-Finishing surface of walls with cement based wall putty ( Water Based ) of approved make to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
537.39
48150
89.6
(WAITING HALL)-Priming one coat with approved Water bound cement primer including cost of Primer to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
537.39
43582
81.1
(WAITING HALL)-Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
307.89
33037
107.3
(WAITING HALL)-Painting 2 coats to walls with Weather coat (ISI) approved shade on new work to give an even shade to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
229.5
22812
99.4
(INTERNAL ROAD)-Providing & fixing 25mm thick Bitumenous expansion joint board (I.S.I.) in expansion joint complete as per drawing & Technical Specification.
200
63080
315.4
(INTERNAL & EXTERNAL ELETRIFICATION)- Supply & fixed Recessed extra lead submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire -Finolex/ L&T/ Anchor/Havells/V-Guard /Great White/HPL) exceeding to Group-C points in 2 X 1.5sqmm +1 x 1.5sqmm
196
44903
229.1
2 X 2.5sq.mm +1 X 1.5sqmm
80
21424
267.8
2 X 4sq.mm +1 X 1.5sqmm.
40
12664
316.6
2 X 6sq.mm +1 X 2.5sqmm.
35
14441
412.6
4X6sq.mm+2X2.5sq.mm
25
10315
412.6
Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories
4
79812
19953
Extra copper flat 25 X 6mm
40
36640
916
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 12way, Double door
2
5457
2728.7
Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP)
16
4801
300.1
Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-HPL/ Havells/ Legrand /L&T/C&S) Single pole and Neutral (SP&N)
2
600
300.1
Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of 63Amp ICTPN Main switch on MS angle frame
2
6216
3108
Supply and fixing of 100Amp TPN bus bar-300 X 32 X 3mm size with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections.
2
8248
4124
Supply and fixing of 1' X 28watt T-5 fitting( Make-Bajaj/ Philips /Crompton)
7
5894
842
Supply and fixing of S/F of 48" Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton model-Jura, PolyCab (Model Vital, Polar Model Winpro) etc.
3
15448
5149.6
Supply and fixing of Exhaust fan 10"/12" size
2
7734
3867.1
Supply of 6sq.mm 2core PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab
360
71640
199
Supply of 10sq.mm 3core PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab
952
260848
274
Laying of cable through 32mm HDPE pipe with brick massonray work complete as per specification (for 6sqmX 2 core cable)
312
94224
302
Laying of cable through 32mm HDPE pipe with brick massonray work complete as per specification (for 10sqmX 3 core cable)
840
261240
311
Supply , making and termination with brass compression gland and aluminium logs for 2 X 6sqmm PVC insulated and PVC sheathed aluminium cable of 1.1kv grade (without cost of cable )
50
6900
138
Supply , making and termination with brass compression gland and aluminium logs for 2 X 10 sqmm PVC insulated and PVC sheathed aluminium cable of 1.1kv grade (without cost of cable )
116
16820
145
Supply and fixing of 15/20Watt CFL lamp (Philips/ Havells/ AnchorBajaj)
8
1600
200
Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj)
3
1989
663.1
Supply and fixing of extra down rod of 20mm dia for 20cm x 3
3
504
168
S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp
2
1368
684
Fixing charges of F.L fitting with all connections
17
1275
75
Fixing charges of ceiling fan with all connections
3
360
120
Fixing charges Exhaust fan with making of hole on wall and all arrangement and connections
2
784
392
Supply and fixing of 16/18SWG metal box of 150mm X 150mm X 60mm deep size (nominal size) on surface/Recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in cases of recessed conduit as required
4
508
127
Supply and fixing of 16/18SWG metal box of 200mm X 150mm X 60mm deep size (nominal size) on surface/Recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in cases of recessed conduit as required
4
608
152
Supply , installation , testing and commissioning INDOOR pannel board with danger board Floor rubber mat 6'x4' x 6mm
2
6000
3000
Supply , installation , testing and commissioning INDOOR pannel board with danger board Floor rubber mat 50 x 50 x 6mm
8
880
110
16/18 SWG pannel box L X BX 5"= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinged door must be painted one coated red oxide and two coat enamel gray paint
11520
17395
1.51
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L X B including cost of copper conductor and other fittings
2304
2004
0.87
Supply and fixing of Ammeter with selector switch including all connections
1
1398
1398
Supply and fixing of voltmeter with selector switch including all connections
1
1398
1398
Supply and fixing of Indicator lamp with toggler switch and fuse
3
726
242
Supply and fixing of C.T coil upto 400Amp including all connections
3
2580
860
Supply and fixing of 4pole MCCB in cubicle pannel board of 100Amp 16KA
1
6220
6220
Supply and fixing of 4pole MCCB in cubicle pannel board of 125Amp 16KA
2
23910
11955
Supply and fixing of 4pole MCCB in cubicle pannel board of 200Amp 16KA
1
24205
24205
Recessed wiring to light point/ Fan point/ Exhaust fan point/ Call bell point of Group-A for hall & toilet with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL)
6
3770
628.4
Recessed wiring to light point/ Fan point/ Exhaust fan point/ Call bell point of Group-B for hall & toilet with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL)
4
4318
1079.7
Recessed wiring to light point/ Fan point/ Exhaust fan point/ Call bell point of Group-C for hall & toilet with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL)
10
15187
1518.7
Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type)
6
2140
356.8
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (make-Anchor/ Legrand /Roma/Great White/HPL)
6
10141
1690.3
S/F of 15W post top LED fitting (Make-Havells /Philips/Bajaj/PAC/Crompton) model-CORALMINIPT15WLED757PSYMTOPC
24
132204
5508.5
S/F of 60W LED street light fitting(Make-Havells /Philips/Bajaj/PAC/Crompton) model-ENDURASUNDOWNSL60WLED765PASYBOTG
56
345492
6169.5
Supply and installation of Aethetically decarative hot dipped galvanised mild steel step pole with gray powder finish compatible for all post top range.(make-Havells/Philips/Bajaj/Cram) model-ECB pole 3m top 76mm dia
24
488136
20339
Supply and instalation of 6 mtr high GI octagonal pole with single overhang bracket or length up to 2 mtr, duely primed and painted. The column shall be provided with in built loop box with 4 way 32Amp Heavy duty connector, 1 no SP MCB with wiring from MCB to fitting and shall have matching flush door, febricated painted complete with RCC foundatin including foundation bolt, suitable DWC/PVC pipe laid within the foundation for IC & OG cable as per the Deptt. Requirment. Specification:-Top Dia=70mm, Length=4000mm, Bottom dia=130mm Lenth 2000mm, Base plate=220X220X16 thick duely welded in column, RCC Foundation=750X750X1200 Complete.
56
1683796
30067.8
TRANSFORMER Supply Installation of 25 KVA,11/0.4 KV Pole mounted Sub-Station using 160X152mm WPB pole with BIS lev-II to Transformer as per the specification & estimate of TPCODN
1
415844
415844.1
Construction of 11KV 3PH 3w O/H line
0.05
141452
2829042.4
L.T.Line 3 ph 4 w using 3 x 50+1 x 35 sq.mm XLPE ABC & 8 mtr long PSC poles with fittings with all materials required for the same as per the specification & estimate of TPCODL
0.15
102701
684676.3
Provision for power supply to the shed permices including survice connection charges, security deposit and inspection etc..
1
42372
42372.9
(WAITING HALL PLUMBING WORKS) Supplying all materials, labour, T&P for laying of 20 mm CPVC inlet pipes S.D.R - 11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water pressure. The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer- in- charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
20
6210
310.5
Supplying all materials, labour, T&P for laying of 25mm CPVC inlet pipes S.D.R - 11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water pressure. The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer- in- charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
88
36520
415
Supplying all materials, labour, T&P for laying of 32 mm CPVC inlet pipes S.D.R - 11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water pressure. The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer- in- charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
20
12776
638.8
Supplying all materials, labour, T&P for laying of 40 mm CPVC outlet pipes S.D.R - 11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water pressure. The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer- in- charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
16
13792
862
Supplying all materials, labour, T&P for laying of 50 mm CPVC outlet pipes S.D.R - 11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water pressure. The cost inclusive of all duties,transportation scaffolding etc. as per specification and direction of Engineer- in- charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
12
16312
1359.4
Suppylying all material, labour,T&P for fitting & fixing of 25mm dia CPVC ball valve water supply fittings confirming to IS-15778 with ISI mark as per ASTM D-2846 with jointing materials etc. including testing the joints with required water pressure. The cost inclusive of all duties, transportation, scaffolding etc. all complete as per specification & direction of EIC. Make:Astral/Supreme/Ashirvad/Ajay/AKG
8
4557
569.7
Supplying all materials labour, T&P for making grooves in bricks/stone masonry walls vertically or horizontally up to required depth and width for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b. chips and finished smooth with cement mortar (1:4) to original shape including cost of materials , curing, conveyance, of all materials etc. all complete as per specification & direction of EIC.
50
12340
246.8
Supplying all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, duties etc.For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall all complete as per specification & direction of Engineer-in-charge.
12
836
69.7
Supplying all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, duties etc.For 75mm to 150mm dia pipe to pass in 250mm thick wall all complete as per specification & direction of Engineer-in-charge.
8
1974
246.8
Supplying all labour,T&P and cutting holes in RCC chajja/roof/floor for taking GI/PVC pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
5
1091
218.2
Supplying all materials, labour,T&P for fitting and fixing of white glazed vitreous china water closet (Orissa pattern) of size 580mm x 440mm of approved make as per IS-2556 with ISI mark fixing on the floor with 32mm PVC Long flush bend and cement concrete 1:2:4 for fitting the closet etc. all respect in all floors including cost, conveyance of all materials etc.all complete as per specification and as per direction of Engineer-in-charge. Make: HINDWARE/Jaquar/Parryware/Cera
2
7654
3827.1
Suoolying all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) of approved make as per IS-2556 with ISI mark including supply of suitable PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) with hinges & rubber buffers etc. all complete including cost, and conveyance as per specification all complete as per direction of Engineer-in-charge. Make: HINDWARE/Jaquar/Parryware/Cera
2
24117
12058.7
Supplying all materials, labour, and T&P for fitting and fixing of PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark and providing of necessary PVC wall plug, screws and 15mm dia PVC water connecting pipe with union at each end etc. As per specification all complete as per direction of Engineer-in-charge. Make: HINDWARE/Jaquar/Parryware/Cera
2
4069
2034.7
Supply all materials and labour for fitting and fixing of sizesize 550x400x195 mm white glazed vitreous china full pedestal wash hand basin of approved make as per IS-2556 with ISI mark with up to 4th floor supply & fixing of 32mm PVC waste Pipe,15mm dia PVC water connection pipe,basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. with all duties, transportation etc. all complete as per direction of EIC. Make: HINDWARE/Jaquar/Parryware/Cera
3
24414
8138.3
Supplying all materials, labour & T&P for fitting and fixing of Flat back large standing urinal of size 375x390x590mm of white glazed vitreous china flat back, lipped front urinal basin confirming to specification of approved make as per IS-2556 with ISI mark along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe & 32mm PVC waste Pipe with all duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. Make: HINDWARE/Jaquar/Parryware/Cera
2
16648
8324.1
Supplying all materials, labour, T&P for fixing of sizes600mm x 450mm of bevelled edge mirror of 5mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs including cost, conveyance, of all materials complete as per specification and direction of E.I.C.
3
3250
1083.5
Providing all materials, labour,T&P and fittings and fixing of different water supply (CP on Brass) fitting as per IS specification & approved make of following sizes and specification with leak proof threaded joints with spun yarn and white zinc or any other method as required and directed including all duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. Make: HINDWARE/Jaquar/Parryware/Cera /Birla (15mm CP two Bib cock with wall flange)
10
16409
1640.9
15mm CP Urinal Valve Auto Closing System
3
6236
2078.9
15mm Angle Stop cock with wall flange
3
4449
1483.3
15mm pillar cock
10
10598
1059.8
C.P. Soap Dish Holder
3
2431
810.5
Towel Ring with round flange
3
2910
970.2
CP Towel Rail of 600mm long
4
6009
1502.3
600mm long Glass Self
3
3606
1202.1
Health Faucet with 1.00m long PVC tube & wall hook
5
7712
1542.5
32mm C.P. Bottle Trap
4
4644
1161.2
32mm Half threaded C.P. waste
4
2319
579.9
32mm C.P. Doom waste
4
586
146.6
15mmx80mm C.P. Extension piece
3
1482
494.2
125mm dia stainless steel doom grating
10
1466
146.6
Supplying all materials, labour, T&P, fitting and fixing UPVC SWR 110 mm dia. pipes (Type-A) (Ringfit) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
26
14500
557.7
Supplying all materials, labour, T&P, fitting and fixing UPVC SWR 75 mm dia. pipes (Type-A) (Ringfit) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
25
5687
227.5
Supplying all materials, labour, T&P, fitting and fixing UPVC Class-III(6kg/cm²) confirming to IS:4985/2000 of approved make both below & above ground level or fixing on wall surface in all floors including fittings of the following nominal bore with clamps including making good the wall ,ceiling & floor all , duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:As per EPM Rate
10
3117
311.7
Supplying all materials, labour, T&P, fitting and fixing of following dia UPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 with all duties, transportation & requisite testing as per specification & direction of Engineer-in-charge. (125mmx110mm 'P' Trap with lip ring) Make:Astral / Supreme / Ashirvad/ Ajay/ AKG
8
4638
579.8
110mmx110mm 'P' Trap
4
2319
579.8
110mmx87.5º plane bend
6
1451
241.9
110mmx45º plane bend
6
1129
188.3
110mmx87.5º Door bend
6
1645
274.3
110mm WC connector/bend with lip ring
8
1701
212.7
110mm Single Tee with Door
8
2974
371.8
110mm Single Tee Plain
10
3160
316
110mm Single Y
6
2593
432.2
110mm Cowl
5
418
83.7
PVC Clamp Suitable for 110mm dia pipe
25
2412
96.5
Providing, fitting, fixing including testing & commissioning of 2000 Ltr. capacity polyethylene moulded water storage cylindrical tank .
1
9000
9000
Providing all materials, labour, T&P for fitting and fixing of 20mm thick white marble partition for urinal of sizes-900mmx600mm including cutting, edge moulding, both side polishing including fixing on the wall after groove cutting & making good the damages. The cost inclusive of all transportation etc. all complete as per specification & direction of Engineer-in-charge.
2
11256
5628
Providing all materials, labour and T&P for fixing of water purifier cum cooler
1
42334
42334.7
Supplying, Fitting & Fixing of 110 m.m Dia UPVC Rain Water Down Pipe of approved brand / make & gauge in proper position & plumb complete including cost,conveyance,loading,unloading,stacking and of all materials ,cost of all labour, T&P ,sundries required for the work etc. complete in all respect as directed by the Engineer- in -charge.
25
11002
440.1
Supplying all materials, labour, T&P, laying in trenches UPVC SWR 160mm dia. pipes (Type-A) (Ringfit) up to 4th floor of approved make confirming to IS-13592/1992, both below & above ground level including earth cutting & refling trenches duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge
25
29822
1192.9
Supplying all material, labour, T&P and construction of Gully Trap chamber of Inner size 300mmx300mmx450mm depth with 250mm nominal size flyash Brick having crushing strength not less than 75kg/ sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size, earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all royalty, cost, conveyance etc. all complete as per specification & direction of EIC.
6
18180
3030
Providing all materials required for construction of inspection chamber of V with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm dia including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
6
87990
14665
Supplying all materials required for construction of manhole chamber of Inner size 1200mmx900mmx 900mm depth. with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 200mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-25 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 150mm average thick with form work as per the required size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame ( medium duty) for opening of 560mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
2
60384
30192
Supplying all materials, joining materials, labour and T&P and fixing 1hp water pump (Havells/Crumpton/Kirloskar).
1
9585
9585.8
Providing and laying Cement concrete(1:2:4) for A.S. Flooring of 25mm average thick using graded hard granite stone aggregate of 12mm size of approved quality and from approved quarry, laid to level and slopes, including finishing smooth or checkered with floating coat of cement punning, watering and curing etc. complete as per drawings specification and direction of Engineer-in-charge.
4.13
40770
9871.8
Providing and laying cement concrete (1:2:4) in foundation and bottom layers using 12mm size hard black crusher broken granite chips of approved quality and size from approved quarry including cost, conveyance, royalty, all complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.4
3948
9871.8
Supplying, fitting & fixing of 500mm dia clear opening RCC man hole cover with frame.(medium duty) of precast factory including locking arrangement. The cost inclusive of all labour, T&P, transportation etc. all complete as per specification & direction of EIC.
2
5460
2730
Supplying, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, transportation etc. all complete as per specification & direction of EIC.
8
1372
171.6
Supplying, fitting & fixing of 150mm dia S.W. Tee. The cost inclusive of all labour, T&P, transportation etc. all complete as per specification & direction of EIC.
20
10600
530
Supply all labour, T&P for benching & making Channel for inlet & outlet chamber.
25
5290
211.6
Supplying SS Dustbins Double Cylinder (Duo) made of 18 gauge, SS-202 grade stainless steel hairline finish of size width 400 mm external dia., length 750 mm and height 750 mm with 2 nos. 300 mm diameter round openings at top with PU coating including 125 mm high AAI Blue color Logo and color coded waste description sticker and Neoprene gasket ring at bottom. The dustbin should have removable cover and provision for clipping poly bags The dustbin shall display sticker indicating type of garbage and the top shall be finished with PU coating.
6
103200
17200
Providing & fixing at all levels and locations, informatory/ directional/warning signages in required font, design, pattern and size made of 4 mm thick odorless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color, of approved quality and make, with beveled edges having self adhesive self luminescent vinyl sheet ( film thickness 150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or approved equivalent over which the signage/ letter cutout made of vinyl sheet ( film thickness 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge.
5
10000
2000
Providing and fixing of LED illuminated flex board for information all complete under instruction of Engineer-in-Charge
6
24000
4000
Providing and fixing in Position concrete benches as approved design under instruction of Engineer-in-Charge.
8
28440
3555
Providing and fixing in Position concrete planter box for plantation of size (400 x 750 x 750)mm as approved under instruction of Engineer-in-Charge.
10
20000
2000
Preparation of pits for trees in planter box, refilling the earth after breaking clods and mixing with manure in the ratio 3:1 flooding with water, filling with earth if necessary, watering, fine dressing, leveling, supply and transportation and mixing of soil improvement, nutrients (including manure, fertilizers as required, and inside coat of DURSBAN or equivalent in all pits). Planting and staking in full at the specified location, including replacement of unhealthy and dead plants in the maintenance period. Stacking and disposal of material declared unserviceable and surplus including all leads and lifts.
40
100000
2500
(SITE DEVELOPMENT & UTILITY)- Providing & fittiing 60mm thick interlocking paver blocks of approved shade abd pattern on 50 mm thick bed of sand etc complete as per direction of Engg. in charge.
178.7
634545
3550.9
OLD JETTY DISMANTLING Dismantling and removing R.C.C. pile, pile muff, column, beam, slab & stepsincluding stacking the useful material for reuse and removing the debris within 50m lead
153.66
432291
2813.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements