Directorate Of Ports And Inland Water Transport Tender

R.C.C.work of M-30 with 20mm. down size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering and curing for 4 weeks and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials cost of all labour, labour cess, cost of all T&P required for the work etc, complete in all respect as per direction of Engineer-in-charge.

Straightening cutting bending bent or coiled rods, including cranking, hooking, welding or jointing the M.S rods or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C works including cost, conveyance and taxes of M.S rods or tor steel and binding wires of 18 to 20 gauge including cost of all labour, labour, labour cess, T & P etc required for the work etc. complete as directed by the Engineer in Charge. (Brand of Steel - SAIL )Measurement of reinforcement will be made on lengthwise including hooks, if any, separately for different diameter as actually used in work, excluding overlaps, from the length so measured, the weight of reinforcement shall be calcuted in quintals by multiplying the coefficient per unit length of bar as per code of the respective size of bars used on the basis of wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding & placing shall not be measured as the cost of these items has already been included in the analysis of rates for reinforcement as per rule in force.

Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost and conveyance of all materials with all labour, labour Cess and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (R.C.C. Beam, Column griders and Brassmor etc. complete.)

Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost and conveyance of all materials with all labour, labour Cess and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (R.C.C. Floor and Roof Slab, landing balconies projecting sub-shades and chajja upto 4.3 mtr. height.)

Transporting Bulky materials like M.S/ Cast Iron Pipes by truck including loading & unloading within 5 Km with Transportation, labour and labour cess and T & P etc required to complete the work in all respect as per direction of Engineer in Charge.

Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or - 2% in cement mortar (1:6) in Superstructure including cost conveyance, royalty and all other taxes of materials etc. with curing, labour and labour cess and T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charg

16 mm thick cement plaster in cement mortor (1:6) over R.C.C/ brick Masonary including cost and conveyance of all materials with all the taxes, royality, labour, labour cess,T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charge

Priming one coat with approved Water bound cement primer including cost including cost and conveyance of all materials with all the taxes, including scaffolding,staging charge with curing, labour, labour cess,T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charge.

Finishing walls with Weather coat (ISI) of approved shade in new work i.e two coats to give an even shade including cost and conveyance of all materials with all the taxes, including scaffolding,staging charge with curing, labour, labour cess,T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charge.

Supply and Filling with Earth at site by mechanical means within 5 Km in layers not exceeding 100mm watering and compacting to the required density in O.M.C with PRR including cost, conveyance, royalty, Transportation, labour and labour cess and T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charge.

Supply and Filling with Moorum and laying sub-base in layers not exceeding 100mm watering and compacting to the required density in O.M.C with PRR including cost, conveyance, royalty and all other taxes of materials, labour and labour cess and T & P etc required to complete the work in all respect as per specification & direction of Engineer in Charge.