Directorate Of Ports And Inland Water Transport Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Directorate Of Ports And Inland Water Transport - PIWT Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date18 Aug 2023
Closing Date25 Sep 2023
Tender Amount₹ 1,12,05,25,409
Costs
EMD
₹ 1,13,00,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PIWT_92561_1Bid Award Id
ViewTender No
DPIWT-11 /2023-24Tender Authority
Directorate Of Ports And Inland Water Transport ViewPurchaser Address
-Website
http://http://ct.odisha.gov.in/content/1/7
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
116
509100
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc. complete as directed by the Engineer-In-Charge.
3271.67
27788256
8493.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
108.73
1694176
15581.5
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
505.88
7427734
14682.8
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
431.25
5983162
13874
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
129.38
1039218
8032.3
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
20.7
287191
13874
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
404.62
39253116
97012.3
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
11.52
1073323
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
31.76
2959091
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
33.74
3143569
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
303.95
28319143
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Service Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
4.14
385725
93170.4
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
2
500000
250000
Supplying, handling, transporting and fixing in position of Arch fender of size DAV- 500x1500 mm Length as per Drawing with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc. and complete as per Engineer-in-charge.
9
1098000
122000
Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc. complete as per drawing and specifications as directed by the EIC.
13
334100
25700
KANINALI -LANDING JETTY - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (750mm & 1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
48
2416963
50353.4
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
290.07
27265622
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
576
3744000
6500
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (750 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
780
4290000
5500
Chiseling/Breaking using suitable tools and equipments the top of pile (1000 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
18
78998
4388.8
Chiseling/Breaking using suitable tools and equipments the top of pile(750 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
30
98748
3291.6
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
916.84
7787272
8493.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
15.88
247434
15581.5
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
89.14
1308824
14682.8
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
93.75
1300687
13874
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
28.13
225948
8032.3
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
4.5
62433
13874
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
111.45
10812020
97012.3
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
1.68
156526
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
6.57
612129
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
7.21
671758
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Coping Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.83
170501
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
66.08
6156700
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.9
83853
93170.4
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
KANINALI-APPROACH JETTY-1 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
32
1611308
50353.4
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
247.97
23308361
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
1024
6656000
6500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
32
140441
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
908.84
7719323
8493.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
28.22
439709
15581.5
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
111.52
1637425
14682.8
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
112.5
1560825
13874
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
33.75
271090
8032.3
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
5.4
74919
13874
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
112.37
10901272
97012.3
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
2.99
278579
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
8.76
816172
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
11.55
1076118
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
79.29
7387481
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
1.08
100624
93170.4
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
KANINALI-APPROACH JETTY-2 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
45
2265903
50353.4
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
348.7
32776649
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
1440
9360000
6500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
45
197496
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1278.06
10855330
8493.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
39.69
618429
15581.5
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
134.85
1979975
14682.8
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
150
2081100
13874
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
45
361453
8032.3
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
10.8
149839
13874
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
158.02
15329883
97012.3
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
4.21
392247
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
10.92
1017420
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
17.35
1616506
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
111.58
10395953
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
2.16
201248
93170.4
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
KANINALI-APPROACH BUND-P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
270
1849527
6850.1
Formation of rock layer with quarry stones (rough angular) weighing 3.5 T to 4 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (i.e.) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
1812.25
4393437
2424.3
Formation of rock layer with quarry stones (rough angular) weighing 0.35 T to 0.4 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (i.e.) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
1432.08
3140837
2193.2
Formation of filter layer with quarry stones (rough angular) weighing 1 kg to 50 kg, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
1545.04
3388581
2193.2
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
2000.96
3533095
1765.7
KANINALI-GANGWAY- Gang way (20m x 4m) Gangway Structure certification by IRS shall be obtained based on design confirming to any National/ International standards. The design to be submitted for the gangway shall include the bearing design, flap design, provision for lifting etc. Gangway shall be disign and built. The IRS certification including design is in the scope of contractor.
The following documents shall be submitted; 1. Design calculation for loads and section modulus 2. Construction drawings with plan at bottom, plan at top, side elevation, typical sections etc 3. General arrangement drawing with details of pontoon end support and jetty end support.
Type of Vehicle to be considered for design : Type 3 Truck/Bus with 3 axle (as per IRC- 1983) with Gross Tonnage of 25 Tonne
80
8000000
100000
KANINALI-PONTOON-Pontoon with Guide Piles (30m x 15m). The pontoon shall be designed and built as per "Rules and Regulations for Construction and Classification of Inland waterways Vessels, July 2021, as amended". The indicative class notation would be: IW,PONTOON, Zone 1, INWATER SURVEED (10). The vessel shall comply with the requirements of the IFS Classification Note"Extended Dry-docking Scheme", and is fit for service with an extended interval of "10" years between successive dry-dockinngs. EDD(10) will be considered subject to long-life coatings (Manufacturer's guarantee that the underwater coatings used are designed to last for the interval of ten years between successive dry docking. IRS certification is mandatory to ensure the vessel's compliance with the Rules, by approval of plans, supervision of construction and witnessing tests and trails and upon successful completion of building, issue certificate of classification. The guide piles shall be designed as per IS 4651 considering all the load cases. The IRS certification including design is in the scope of contractor.
Type of Vehicle to be considered for design : Type 3 Truck/Bus with 3 axle (as per IRC- 1983) with Gross Tonnage of 25 Tonne
450
45000000
100000
KANINALI-WAITING HALL - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (450mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
8
402827
50353.4
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
22.25
2091426
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for 450mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge. Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
292.4
1315800
4500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 450 mm dia piles as directed by the Engineer-In-Charge.
8
15799
1974.9
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
46.48
394782
8493.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1.8
28046
15581.5
Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
53.96
11158
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
29.39
51350
1747.2
P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
7.35
50348
6850.1
Providing and laying reinforced cement concrete in concrete mix M35 for Column excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
10.44
173236
16593.5
Providing and laying reinforced cement concrete in concrete mix M35 for Beams excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
23.67
336215
14204.3
Providing and laying reinforced cement concrete in concrete mix M35 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
37.64
393782
10461.8
Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or -2% in cement mortar (1:6) in foundation including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
50.37
305489
6064.9
16 mm thick cement plaster in cement mortor (1:6) over brick masonary with punning including cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
404.03
110098
272.5
Supplying,fitting &fixing Vitrified tiles(600mmx600mm) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost and conveyance of all materials and all taxes royalty, labour, labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
78.24
115552
1476.9
Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
74.7
6461
86.5
Priming one coat with any approved primer including cost of primer , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge. (For wood work )
6.39
422
66.1
Supplying, fitting, fixing Dressed seasonal Sal wood work framed and fixed (W&P) in trusses, purlines, frames of door and windows and beams per one cum. including cost of all consumables, labour, taxes and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
0.07
5618
80268.2
Supplying,fitting,fixing of 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted fixed complete in all respect in all respect as directed by the Engineer-in-Charge.
3.2
14863
4644.8
Supplying,fitting,fixing of window(sliding type)made up aluminium section 9778 as windows frame,section No,4095,4096 and 9777,39994 as shutter frame with 5mm thick glass as pannel fitted with rubber beading including locking arrangement including all fittings,including cost of materials all taxes,labour,T & P including cost of glass etc.complete as per direction of Engineer-in-charge
21.6
91432
4233
Supplying, fitting & fixing of M.S. Grill for doors ,Windows & Ventilators of approved design including cost,conveyance, fabrication charges,labour,T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.
5.07
53363
10525.4
Painting two coats with approved paints on new iron work to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
49.5
7652
154.6
Finishing surface of walls with cement based wall putty ( Water Based ) of approved make to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
286.25
21755
76
Priming one coat with approved Water bound cement primer including cost of Primer to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
596.6
41105
68.9
Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade to make it finished smooth & even surface including cost of paint , materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
590.3
55724
94.4
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
8.55
829455
97012.3
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
0.21
19565
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Plinth Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
1.63
151867
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Lintel Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.63
58697
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Roof beam including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.6
149072
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.79
73604
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.17
109009
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
4.46
415539
93170.4
Providing and laying reinforced cement concrete in concrete mix M25 for Column excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1.9
31259
16452.6
Providing and laying reinforced cement concrete in concrete mix M25 for Beams excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
3.3
34882
10570.4
Providing and laying reinforced cement concrete in concrete mix M25 for footing excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
0.23
1941
8627.2
Providing and laying reinforced cement concrete in concrete mix M25 for slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1.2
19743
16452.6
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Plinth Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.08
7453
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Lintel Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.07
6521
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Roof Beam including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.05
4658
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.57
53107
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.8
74536
93170.4
KANINALI-ELECTRIFICATION-Recessed wiring to Tube light point/Fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose (Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable size with 1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). (Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch)
22
15749
715.9
Supplying & fixing of Modular GI box for 2-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge.
22
4923
223.8
Supplying & fixing of Modular GI box for 8-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge.
6
2335
389.2
Supplying & fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outlet on the existing switch box/ cover including connections etc. required as per the direction of Engineer-in-charge.
6
1376
229.4
Installation,Testing and Commissioning of Stepped type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required including all accessories and connections as per the direction of Engineer-in-charge.
6
2005
334.2
Supplying and drawing 1x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in existing surface/recessed PVC conduit as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
60
2964
49.4
Recessed wiring to sub-main in 2x2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
60
8910
148.5
Recessed wiring to sub-main in 2x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
20
2690
134.5
Supplying & fixing of 5amp to 32amp rating 240V "B" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.
6
807
134.5
Supplying & fixing of Modular Blanking Plate of ISI Marked on the existing Modular switch board including connections etc. required as per the direction of Engineer-in-charge.
2
100
50.4
Supplying Fitting & Fixing, Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. Required as per the direction of Engineer-in-charge(.Celing Fan Havels Fusion 1200mm make 3 blade )
6
19937
3322.9
Supplying Fitting & fixing of Tube light of ISI Marked on the existing Modular switch board and celing rose including connections etc. required as per the direction of Engineer-in-charge.(Havels make 20wt LED 6500K)
16
11193
699.6
Supply, Installation, Testing, and Commissioning of 63 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ ANCHOR/ L&T/HAVELS/C & S/ RK
1
2098
2098.8
Supplying & fixing of 2 WAY , SPN, Single Door MCB-DB with sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) including all accessories and connections as per the direction of Engineer-in-charge.
1
495
495.6
Supplying & fitting , fixing of LED Street light 50wt Havells make in all respect as per direction of Engineer-in-charge.
1
2622
2622.9
Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as required as per the direction of Engineer-in-charge.
1
2547
2547.5
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing from earth electrode to PANNEL BOARD directlyas directed by the Engineer in Charge.
10
977
97.7
KANINALI-SEPTIC TANK-Earth work in excavation of foundation in Ordinary soil within 50m initial lead &1.5 M initial lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
12.27
2537
206.8
Earth work in excavation of foundation in Ordinary soil within 50m initial lead &1.5 M initial lift below 1.5 mtr lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
1.53
341
223.2
P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
1.41
9658
6850.1
Brick work with 1st class K.B.bricks (23cm x11cmx8cm) size having C/S not less than 75Kg/cum in C.M.(1:4) in foundation and plinth including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
4.9
29718
6064.9
16mm thick cement plaster (1:6) with standard water proofing compound including punning with cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.(Inside)
11.32
3084
272.5
16mm thick cement plaster (1:6) with standard water proofing compound including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (Outside)
5.57
1517
272.5
2.5 cm thick AS flooring with C.C. (1:2:4) including punning using 12mm size HGCB chips including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
2
777
388.5
Filling foundation & Plinth with KB Brick Khoa 20cm thick including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
6.96
5326
765.3
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
1.19
2079
1747.2
M.S. Reinfocement for R.C.C. Work Including cutting, bending, binding & tying the grills including all cost, conveyance,taxes of M.S. Reinfocement and binding wire 18 to 20 guage etc.complete in all respect as per the Specification and direction of the Engineer-in-charge.
0.39
3633
9317
Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete in ground floor as per the Specification and direction of the Engineer-in-charge.(R.C.C. Floor and Roof Slab, landing balconies projecting sub-shades and chajja upto 4.3 mtr. height.)
7.91
7745
979.2
Providing fitting & fixing of iron foot step of 16mm. Dia bar including all cost as per the Specification and direction of the Engineer-in-charge.
4
480
120
KANINALI- PH -Earth work in excavation of foundation inhard soil within 50m initial lead &1.5 M initial lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas asdirected by the Engineer-in-Charge.
8.06
1666
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
1.63
2847
1747.2
P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
0.6
4110
6850.1
Cement concrete (1:2:4) using 12 mm size hard granite chips of approved quarry including curing,cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
0.79
6553
8295.7
Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or -2% in cement mortar (1:6) in foundation including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
0.13
788
6064.9
12 mm thick cement plaster in cement mortor (1:4) over brick Masonary including punning with cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
0.81
157
194
SupplyM.S.rainforcement for R.C.C.work including cutting, bending, binding and straighteing with cost conveyance, labour, T&P, all taxes of M.S.rod including cost of binding wire 18 to 20 gauge complete in all respect as per the Specification and direction of the Engineer-in-charge.
-
93
93170.4
Supplying all materials,labour and T&P for cutting grouves in Pucca Floors & walls for taking GI/ PVC Pipes and making good the damages as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.
30
6759
225.3
Supplying all materials,labour and T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.
4
217
54.3
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Supply pipe 32mm dia)
45
24903
553.4
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Delivery pipe 25mm dia)
20
7590
379.5
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Internal wiring pipe 20mm dia CPVC pipe)
30
8328
277.6
Providing and fixing on wall face unplasticised Rigid UPVC Soil, Waste and Rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 90mm. dia UPVC Single Socket Pipe (Waste water line)
20
7290
364.5
Supplying & Laying in trenches unplasticised UPVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. (Earth work in trenches to be measured and paid for separately)(110mm. dia UPVC Single Socket Pipe) (Soil Line)
20
10996
549.8
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (110mm. Dia PVC Plain Bend)
5
1255
251.1
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. 110mm. Dia PVC Cowel
3
254
84.9
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (110mm. Dia PVC Coupler)
1
173
173.2
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia plain bend)
2
229
114.6
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia door bend)
2
288
144
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia door Tee)
2
352
176
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia Cowel)
2
128
64.2
Supplying all materials,labour and T &P for fixing of different size PVC Nahani Trap of following size of self cleaning design with stainless steel grating or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. (Nahani trap (110mm x75mm) with grating)
2
1378
689.4
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge. (15mm dia CP brass Pillar Cock)
2
4887
2443.6
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge.(15mm dia Short body CP brass bib cock )
2
2426
1213.2
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge. (15mm dia Long body CP brass bib cock )
2
3214
1607
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge. (15mm dia CP brass Angle stop cock )
4
4131
1032.9
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge. (15mm dia CP brass Concealed stop cock )
2
1376
688.4
Supplying all labour and T &P for fixing UPVC Ball Valve (32mm dia) of the following size as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge .
4
3576
894.2
Supplying all labour and T &P for fixing CPVC Union (32mm dia) of following sizes as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge.
4
1805
451.4
Supplying & fixing Single Piece Water Closet (European type W.C pan) with integral 'P' trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1: 1) etc with Supplying & fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification and direction of Engineer-in-Charge. (Make-Jaquar, Model- CNS-WHT-851P-P TRAP)
2
31625
15812.6
Supplying & fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification and direction of Engineer-in-Charge.
24
7596
316.5
Supplying & Fixing flexible (Coil shaped) PVC waste pipe for wash basin or sink 32 mm dia with length 1150 mm with PVC waste fittings including cost of all materials, labour & labourcess etc. complete as per specification & direction of the Engineer-in-Charge.
2
250
125
Supplying all materials,labour and T &P for fixing Stainless Steel Towel Rail fixed to wooden plugs with chromium plated brass screws and washers including cost of all materials, labour & labourcess . all complete as per specification and direction of Engineer-in-Charge
2
3223
1611.5
Supplying all materials,labour and T&P for fixing of CP brass Over head Shower of 120mm diameter and 15mm inlet including polishing, cost of all materials, labour & labourcess etc. complete as per specification and direction of Engineer-in-Charge.
2
4661
2330.6
Fixing 630mm x 445mm Swivel mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification including cost of all materials, labour & labourcess etc complete as per specification and direction of Engineer-in-Charge.
2
8080
4040.4
Fixing Wall hung wash basin 590x490x185 mm with half pedestal conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.
2
13834
6917.3
Supplying all materials,labour and T&P for fixing of CP brass soap dish holder fixed to wooden plugs with chromium plated brass screws and washers etc. all complete including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge.
4
4769
1192.3
KANINALI-LAND RECLAMATION:-Formation of core with quarry stones (rough angular) weighing 1 kg to 50 kg, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
10272.18
22528945
2193.2
Formation of armour layer with quarry stones (rough angular) weighing 1 T to 3 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
2682
5882162
2193.2
Formation of Toe armour layer with quarry stones (rough angular) weighing 0.5 T to 1 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
2783.6
6104991
2193.2
Earthwork excavation by mechanical means in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
5660.3
430748
76.1
KANINALI-PARKING AREA DEVELOPMENT-Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
15
26208
1747.2
Quarrying, collecting and supplying good moorum from approved quarry with all leads, lifts and delifts including cost, conveyance, royality taxes of all materials etc. complete and spreading the same in layers not exceeding 22.5cm and consolidation with PRR including watering etc. complete With all leads, lifts and delifts etc. complete as per specification and direction of the Engineer in charge.
45
90504
2011.2
P.C.C of (1:3:6 ) 100 mm includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
30
205503
6850.1
Supplying, fitting & fixing of Paver block of 60 mm size ( Jumbo coloured) including cost and conveyance of all materials with all taxes, royalty, labour and labour cess, T&P required for the work etc. complete as directed by the Engineer-in-Charge.
300
324810
1082.7
Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
83.2
17205
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
4.16
7268
1747.2
Providing and laying reinforced cement concrete in concrete mix M25 for Strip footing excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
24.96
215334
8627.2
Providing and laying reinforced cement concrete in concrete mix M25 for Column excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
0.65
10694
16452.6
Providing and laying reinforced cement concrete in concrete mix M25 for Beams excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
2.11
22303
10570.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Strip Footing including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
4.99
464920
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Plinth Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.73
68014
93170.4
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.74
68946
93170.4
Brick work with 1st class K.B.bricks (23cm x11cmx8cm) size having C/S not less than 75Kg/cum in C.M.(1:6) in foundation and plinth including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
10.93
66289
6064.9
16mm thick cement plaster (1:6) with standard water proofing compound including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
119.7
32618
272.5
Priming one coat with approved Water bound cement primer including cost of Primer to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
138.06
9512
68.9
Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of weather coat to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
138.06
11942
86.5
Supplying, fitting & fixing of Stainless steel gate of approved design including cost,conveyance, fabrication charges,labour,T&P required to complete the work in all respect as directed by the Engineer-in-Charge.
7
73677
10525.4
KANINALI-BOREWELL:-Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(0-100 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
100
169200
1692
Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(101-200 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
100
204510
2045.1
Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(201-260 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
60
140094
2334.9
Supply of all labour & T&P for Lowering the following size G.I/PVC Pipes with or without slotted pipes as per the necessity from ground level and fitted up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign from above excluding cost of fittings & jointing materials including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
260
29328
112.8
Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
1
29594
29594.2
Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia P.V.C Casing pipe etc all complete as per the direction of the Engineer-in-charge. (Including the cost of Cement)
1
9843
9843.2
Supplying all lbour, T&P and maaterials for packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel etc complete as per the directio of the Engineer-in-charge.
1
3223
3223.7
Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mts. Elow ground level including cost of cement all complete as per the direction of Engineer-in-charge.
1
3273
3273.7
Providing supplying fitting and fixing of 5 HP 3 Phase oilfiltered 100mm dia borewell submergable pump set of KSB/ kirlosker/ crompton/texmo and other IS make with control pannel including 2.5sqmm three core PVC coated copper flat cable, 32mm dia HDPE pipe / nipple / bolt and PVC coated 6mm wire rope , U bolt , M.S clamp with all labour, T&P, taxes as applicable at site as per specification and direction of engineer in charge.
1
43610
43610.4
Supplying all labour T&P, materials for Fitting & fixing of 200mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(200mm Sch-80 Pipe)
67
153460
2290.46
Supplying all labour T&P, materials for Fitting & fixing of 150mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(150mm Sch-80 Pipe)
190
286472
1507.75
Supplying all labour T&P, materials for Fitting & fixing of 150mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (Material to be supplied by the Contractor)(150mm Sch-80 Pipe)
3
4523
1507.75
Supplying all labour T&P, materials for Fitting & fixing of reduce socket including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (8" x 6" PVC Reduce Socket)
2
5960
2980
Supplying all labour T&P, materials for Fitting & fixing including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (8" x 12" PVC S. P.)
1
3200
3200
Supplying all labour T&P, materials for Fitting & fixing of 8" UPVC bend including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.
15
7200
480
Supplying all labour T&P, materials for Fitting & fixing of including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (Filter Fitting (30 Mtr))
30
14499
483.3
Supplying all labour T&P, materials for Fitting & fixing of 200mm PVC cone including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(200mm PVC Cone)
1
2500
2500
Supplying all labour T&P, materials for Fitting & fixing of pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (75mm Sch-80 Pipe)
50
33750
675
TALACHUA- MAIN JETTY - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
116
5970392
51468.9
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
893.04
83942812
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for 1000mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge. Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
3712
24128000
6500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
116
509100
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
3271.67
28138325
8600.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
108.73
1718684
15806.9
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
505.88
7534779
14894.4
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
431.25
6069024
14073.1
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
129.38
1053347
8141.5
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
20.7
291313
14073.1
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
404.62
38854485
96027.1
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
11.52
1072705
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
31.76
2957389
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
33.74
3141760
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
303.95
28302851
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Service Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
4.14
385503
93116.8
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
2
500000
250000
Supplying, handling, transporting and fixing in position of Arch fender of size DAV- 500x1500 mm Length as per Drawing with anchor bolts, U hooks, Chains,shall be hot dip G.I coating with 80micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour, consumable items, machineries, tools, tackles,transportation etc.complete as per Engineer Incharge.
9
1098000
122000
Supplying, handling, transporting and fixing in position of Cast iron Bollard (20T ton capacity)with necessary cutting, concrete chipping, drilling, grouting, welding with deck reinforcement steel and necessary coal tar painting(wherever required) including all materials, labour , consumable items etc. complete as per drawing and specifications as directed by the EIC.
13
334100
25700
TALACHUA- LANDING JETTY - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (750mm & 1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
48
2470507
51468.9
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
290.07
27265622
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
576
3744000
6500
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (750 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
780
4290000
5500
Chiseling/Breaking using suitable tools and equipments the top of pile (1000 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
18
78998
4388.8
Chiseling/Breaking using suitable tools and equipments the top of pile(750 mm dia pile) concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete as directed by the Engineer-In-Charge.
30
98748
3291.6
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
916.84
7885374
8600.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
15.88
251013
15806.9
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
89.14
1327686
14894.4
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
93.75
1319353
14073.1
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
28.13
229020
8141.5
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
4.5
63328
14073.1
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
111.45
10702220
96027.1
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
1.68
156436
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, VAT, etc. all complete as directed by the Engineer-In-Charge.
6.57
611777
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
7.21
671372
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Coping Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.83
170403
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
66.08
6153158
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
0.9
83805
93116.8
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
TALACHUA-APPROACH JETTY-1 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
32
1647004
51468.9
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
247.97
23308361
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
1024
6656000
6500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
32
140441
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
908.84
7816569
8600.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
28.22
446070
15806.9
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
111.52
1661023
14894.4
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
112.5
1583223
14073.1
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
33.75
274775
8141.5
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
5.4
75994
14073.1
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
112.37
10790565
96027.1
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
2.99
278419
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
8.76
815703
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
11.55
1075499
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
79.29
7383231
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
1.08
100566
93116.8
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
TALACHUA-APPROACH JETTY-2 - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (1000mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
39
2007287
51468.9
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
302.21
28406742
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for vertical bored piles (1000 mm dia pile) from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge.Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
1248
8112000
6500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 1000mm dia piles as directed by the Engineer-In-Charge.
39
171163
4388.8
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1107.65
9526454
8600.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
34.4
543757
15806.9
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Beam excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
127.87
1904546
14894.4
Providing and laying reinforced cement concrete in concrete mix M40 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
125
1759137
14073.1
Providing and laying reinforced cement concrete in concrete mix M40 for wearing coat as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
37.5
305306
8141.5
Providing and laying reinforced cement concrete in concrete mix M40 for Service Trench excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
9
126657
14073.1
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
136.95
13150911
96027.1
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
3.65
339876
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Main Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
9.47
881816
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Long Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
14.45
1345537
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
88.1
8203590
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Serice Trench including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
1.8
167610
93116.8
Conducting High Strain Dynamic Test as per standard practices(ASTMD 4945 of 1989) The rate is inclusive of testing, hire charges for all equipments like transducers, strain gauge, oscilloscope hammer crane and cost of development of pile concrete with line and dismantling the developed length of concrete, transportation of equipment, labour and furnishing the test result etc., complete and as directed by the EIC.
1
250000
250000
TALACHUA-GANGWAY- Gang way (20m x 4m) Gangway Structure certification by IRS shall be obtained based on design confirming to any National/ International standards. The design to be submitted for the gangway shall include the bearing design, flap design, provision for lifting etc. Gangway shall be disign and built. The IRS certification including design is in the scope of contractor.
The following documents shall be submitted; 1. Design calculation for loads and section modulus 2. Construction drawings with plan at bottom, plan at top, side elevation, typical sections etc 3. General arrangement drawing with details of pontoon end support and jetty end support.
Type of Vehicle to be considered for design : Type 3 Truck/Bus with 3 axle (as per IRC- 1983) with Gross Tonnage of 25 Tonne
80
8000000
100000
TALACHUA-PONTOON-Pontoon with Guide Piles (30m x 15m). The pontoon shall be designed and built as per "Rules and Regulations for Construction and Classification of Inland waterways Vessels, July 2021, as amended". The indicative class notation would be: IW,PONTOON, Zone 1, INWATER SURVEED (10). The vessel shall comply with the requirements of the IFS Classification Note"Extended Dry-docking Scheme", and is fit for service with an extended interval of "10" years between successive dry-dockinngs. EDD(10) will be considered subject to long-life coatings (Manufacturer's guarantee that the underwater coatings used are designed to last for the interval of ten years between successive dry docking. IRS certification is mandatory to ensure the vessel's compliance with the Rules, by approval of plans, supervision of construction and witnessing tests and trails and upon successful completion of building, issue certificate of classification. The guide piles shall be designed as per IS 4651 considering all the load cases. The IRS certification including design is in the scope of contractor.
Type of Vehicle to be considered for design : Type 3 Truck/Bus with 3 axle (as per IRC- 1983) with Gross Tonnage of 25 Tonne
450
45000000
100000
TALACHUA-WAITING HALL - Setting up the piling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for (450mm Dia Pile) piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the EIC.
8
411751
51468.9
Providing and fabricating M.S.liners confirming to IS specifications of SAIL of specified thickness for required length with M.S. shoes of 1.0m height using 8mm thick M.S. plates for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories,all taxes, hire and running charges of all machineries, royality, labour, material, T&P, conveyance charges, Port entry fees etc. all complete as per drawings and specification as directed by Engineer-In-charge. Note:- The stiffener shall be measured under this item.In case the soil strata found to be not good in the founding level of the liner, extra depth may be provided as per site condition.
22.25
2091426
93996.7
Boring through all types of soils, boulders, hard starta and rocks etc.. for 450mm Dia vertical bored piles from the existing ground level 0 mCD to the founding level(-)32.0m CD of the piles, including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc.. complete as per directed by the Engineer-In-charge. Note:-i) In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment shall be made accordingly. ii) The sample of bored materials of regular interval shall be collected and produced for the verification of the Engineer or his representative at no extra cost . in case any test reqiured by engineer in-charge, bored the samples so collected shall be referred to an authorized laboratory / agency identified by the Engineer , cost for testing shall be included in the quoted rate. engineer in-charge decision regarding founding level is final.`no claims in this regards are entertained. iii) Boring through all type of soil strata means soft soil, weathered rock, cemented sand, boulders and hard rock etc., iv) The boring in all type of soil measurement will be made on the basis of depth of boring from encountered soft soil level to founding/pile termination level. v) All the boring depths shall be jointly measured actually at site and Engineer in-charge decision is final.
292.4
1315800
4500
Chiseling/Breaking using suitable tools and equipments the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form work for deck work , including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for 450 mm dia piles as directed by the Engineer-In-Charge.
8
15799
1974.9
Providing and laying reinforced cement concrete in concrete mix M40 for pile excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
46.48
399755
8600.6
Providing and laying reinforced cement concrete in concrete mix M40 for Precast Pile muff excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
1.8
28452
15806.9
Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
45.96
9504
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
29.39
51843
1764
P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and watering, with cost, conveyance, royality, taxes, Labour, labour cess and T&P etc. required to complete the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
7.35
50326
6847.2
Providing and laying reinforced cement concrete in concrete mix M35 for Column excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
10.44
177365
16989
Providing and laying reinforced cement concrete in concrete mix M35 for Beams excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
23.67
343719
14521.3
Providing and laying reinforced cement concrete in concrete mix M35 for Insitu Slab excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
37.64
402601
10696.1
Brick work with fly ash Bricks 23cmx11cmx8cm having crushing strength not less than 75 kg/m2 with dimensional tolerence +2 percent in cement mortar (1:6) in superstructure. with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
39.92
235480
5898.8
16mm thick cement plaster (1:6) with standard water proofing compound including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
342.55
93379
272.6
Supplying,fitting &fixing Vitrified tiles(600mmx600mm) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete as directed by the Engineer-in-Charge.
73.48
108338
1474.4
Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
74.7
6416
85.9
Priming one coat with any approved primer including cost of primer, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge. (For wood work )
6.39
419
65.7
Supplying, fitting, fixing Dressed seasonal Sal wood work framed and fixed (W&P) in trusses, purlines, frames of door and windows and beams per one cum as directed by the Engineer-in-Charge.
0.07
5595
79941.7
Supplying,fitting,fixing of 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted fixed complete in all respect as directed by the Engineer-in-Charge.
3.2
13878
4337.1
Supplying,fitting,fixing of window(sliding type)made up aluminium section 9778 as windows frame,section No,4095,4096 and 9777,39994 as shutter frame with 5mm thick glass as pannel fitted with rubber beading including locking arrangement including all fittings,including cost of materials all taxes,labour,T & P including cost of glass etc.complete as per direction of Engineer-in-charge
21.6
91342
4228.8
Supplying, fitting & fixing of M.S. Grill for doors ,Windows & Ventilators of approved design including cost,conveyance, fabrication charges,labour,T&P required as directed by the Engineer-in-Charge.
5.07
53475
10547.5
Painting two coats with approved paints on new iron work including cost of paint, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
49.5
7652
154.6
Finishing surface of walls with cement based wall putty ( Water Based ) of approved make including cost of paint, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
247.24
18790
76
Priming one coat with approved Water bound cement primer including cost of primer, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
516.81
35608
68.9
Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
516.81
48735
94.3
Fabricating and placing in position of steel reinforcement TMT bars(Fe 500D)confirming to IS 1786 specifications of SAIL/RINL/TISCON for all reinforced cement concrete pile including lifting hook, cutting, bending, tying with 16 gauge G.I. binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
8.55
821031
96027.1
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for precast pile muff including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.21
19554
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Plinth Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.62
150849
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Lintel Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.63
58663
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Roof beam including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.6
148986
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Tank beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.79
73562
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
1.17
108946
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Slab including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
4.46
415300
93116.8
TALACHUA-ELECTRIFICATION-Recessed wiring to Tube light point/Fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose (Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable size with 1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard). (Excluding the cost of supplying and fixing of 100mmx100mmx60mm MS Box with backlight cover -1no for Modular Switch)
22
15749
715.9
Supplying & fixing of Modular GI box for 2-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge.
22
4923
223.8
Supplying & fixing of Modular GI box for 8-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections as per the direction of Engineer-in-charge.
6
2335
389.2
Supplying & fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outlet on the existing switch box/ cover including connections etc. required as per the direction of Engineer-in-charge.
6
1376
229.4
Installation,Testing and Commissioning of Stepped type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.
6
2005
334.2
Supplying and drawing 1x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in existing surface/recessed PVC conduit as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
60
2964
49.4
Recessed wiring to sub-main in 2x2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
60
8910
148.5
Recessed wiring to sub-main in 2x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).
20
2690
134.5
Supplying & fixing of 5amp to 32amp rating 240V "B" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as per the direction of Engineer-in-charge.
6
807
134.5
Supplying & fixing of Modular Blanking Plate of ISI Marked on the existing Modular switch board including connections etc. required as per the direction of Engineer-in-charge.
2
100
50.4
Supplying Fitting & Fixing, Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. Required as per the direction of Engineer-in-charge(.Celing Fan Havels Fusion 1200mm make 3 blade )
6
19937
3322.9
Supplying Fitting & fixing of Tube light of ISI Marked on the existing Modular switch board and celing rose including connections etc. required as per the direction of Engineer-in-charge.(Havels make 20wt LED 6500K)
16
11193
699.6
Supply, Installation, Testing, and Commissioning of 63 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ ANCHOR/ L&T/HAVELS/C & S/ RK
1
2098
2098.8
Supplying & fixing of 2 WAY , SPN, Single Door MCB-DB with sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) including all accessories and connections as per the direction of Engineer-in-charge.
1
495
495.6
Supplying & fitting , fixing of LED Street light 50wt Havells make in all respect as per direction of Engineer-in-charge.
1
2622
2622.9
Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as required as per the direction of Engineer-in-charge.
1
2547
2547.5
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing from earth electrode to PANNEL BOARD directlyas directed by the Engineer in Charge.
10
977
97.7
TALACHUA-SEPTIC TANK-Earth work in excavation of foundation in Ordinary soil within 50m initial lead &1.5 M initial lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
12.27
2537
206.8
Earth work in excavation of foundation in Ordinary soil within 50m initial lead &1.5 M initial lift below 1.5 mtr lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge.
1.53
341
223.2
Cement Concrete (1:3:6) with 40 mm. size black hard granite crusher broken stone chips including cost and conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
1.41
9654
6847.2
Brick work with 1st class K.B.bricks (25cm x12cmx8cm) size having C/S not less than 75Kg/cum in C.M.(1:4) in foundation and plinth including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
4.9
28904
5898.8
16mm thick cement plaster (1:6) with standard water proofing compound including punning with cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.(Inside)
11.32
3085
272.6
16mm thick cement plaster (1:6) with standard water proofing compound including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (Outside)
5.57
1518
272.6
2.5 cm thick AS flooring with C.C. (1:2:4) including punning using 12mm size HGCB chips including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
2
782
391.1
Filling foundation & Plinth with KB Brick Khoa 20cm thick including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
6.96
5246
753.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
1.19
2099
1764
M.S. Reinfocement for R.C.C. Work Including cutting, bending, binding & tying the grills including all cost, conveyance,taxes of M.S. Reinfocement and binding wire 18 to 20 guage etc.complete in all respect as directed by the Engineer-in-Charge.
0.39
3631
9311.7
Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete in ground floor.(R.C.C. Floor and Roof Slab, landing balconies projecting sub-shades and chajja upto 4.3 mtr. height.)
7.91
5315
672
Providing fitting & fixing of iron foot step of 16mm. Dia bar including all cost as directed by the Engineer-in-Charge.
4
480
120
TALACHUA-PH -Earth work in excavation of foundation inhard soil within 50m initial lead &1.5 M initial lift including rough dressing and leveling the bed and depositing the excavated materials away from the working areas asdirected by the Engineer-in-Charge.
8.06
1666
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
1.63
2875
1764
P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
0.6
4108
6847.2
Cement concrete (1:2:4) using 12 mm size hard granite chips of approved quarry including curing,cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
0.79
6632
8395.5
Brick works with fly ash bricks 23 cm x 11 cm x 8 cm size having crushing strength not less than75 Kg/ cm2 with dimensional tolerance + or -2% in cement mortar (1:6) in foundation including cost conveyance,royality and all other taxes of materials etc. with curing complete in all respect as per specification and directon of Engineer in Charge.
0.13
766
5898.8
12 mm thick cement plaster in cement mortor (1:4) over brick Masonary including punning with cost and conveyance of all materials with all the taxes, royality, labour, T & P required for the work etc. complete as directed by the Engineer-in-charge.
0.81
157
194
SupplyM.S.rainforcement for R.C.C.work including cutting, bending, binding and straighteing with cost conveyance, labour, T&P, all taxes of M.S.rod including cost of binding wire 18 to 20 gauge.
-
93
93116.8
Supplying all materials,labour and T&P for cutting grouves in Pucca Floors & walls for taking GI/ PVC Pipes and making good the damages as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.
30
6807
226.9
Supplying all materials,labour and T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.
4
215
53.9
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Supply pipe 32mm dia)
45
24903
553.4
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Delivery pipe 25mm dia)
20
7588
379.4
Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. (Internal wiring pipe 20mm dia CPVC pipe)
30
8328
277.6
Providing and fixing on wall face unplasticised Rigid UPVC Soil, Waste and Rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (90mm. dia UPVC Single Socket Pipe) (Waste water line)
20
7286
364.3
Supplying & Laying in trenches unplasticised UPVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. (Earth work in trenches to be measured and paid for separately)(110mm. dia UPVC Single Socket Pipe) (Soil Line)
20
10990
549.5
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (110mm. Dia PVC Plain Bend)
5
1255
251.1
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (110mm. Dia PVC Cowel)
3
254
84.9
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (110mm. Dia PVC Coupler)
1
173
173.2
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia plain bend)
2
229
114.6
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia door bend)
2
288
144
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia door Tee)
2
352
176
Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. (75mm dia Cowel)
2
128
64.2
Supplying all materials,labour and T &P for fixing of different size PVC Nahani Trap of following size of self cleaning design with stainless steel grating or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. (Nahani trap (110mm x75mm) with grating)
2
1378
689.4
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect.(15mm dia Pillar Cock)
2
4887
2443.6
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect.(15mm dia Short body bib cock )
2
2426
1213.2
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect.(15mm dia Long body bib cock )
2
3214
1607
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect.(15mm dia Angle stop cock )
4
4131
1032.9
Supplying & fixing of bath/toilet fittings of the following size & specification including cost of fittings etc complete in all respect.(15mm dia Concealed stop cock )
2
1376
688.4
Supplying all labour and T &P for fixing UPVC Ball Valve (32mm dia) of the following size as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charg.
4
3576
894.2
Supplying all labour and T &P for fixing CPVC Union (32mm dia) of following sizes as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge.
4
1805
451.4
Supplying & fixing Single Piece Water Closet (European type W.C pan) with integral 'P' trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1: 1) etc with Supplying & fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. (Make-Jaquar, Model- CNS-WHT-851P-P TRAP)
2
31625
15812.6
Supplying & fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification and direction of Engineer-in-Charge.
24
7596
316.5
Supplying & Fixing flexible (Coil shaped) PVC waste pipe for wash basin or sink 32 mm dia with length 1150 mm with PVC waste fittings including cost of all materials, labour & labourcess etc. complete as per specification & direction of the Engineer-in-Charge.
2
250
125
Supplying all materials,labour and T &P for fixing Steel Towel Rail fixed to wooden plugs with chromium plated brass screws and washers including cost of all materials, labour & labourcess . all complete as per specification and direction of Engineer-in-Charge. (Towel Rail 600 mm long (Make-Jaquar, Model-ACN-1111SM)
2
3223
1611.5
Supplying all materials,labour and T&P for fixing of CP brass Over head Shower of 120mm diameter and 15mm inlet including polishing, cost of all materials, labour & labourcess etc. complete as per specification and direction of Engineer-in-Charge.
2
4661
2330.6
Fixing 630mm x 445mm Swivel mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification and direction of Engineer-in-Charge.
2
8080
4040.4
Fixing Wall hung wash basin 590x490x185 mm with half pedestal conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of Engineer-in-Charge.
2
13834
6917.3
Supplying all materials,labour and T&P for fixing of CP brass soap dish holder fixed to wooden plugs with chromium plated brass screws and washers etc. all complete including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge.
4
4769
1192.3
TALACHUA-LAND RECLAMATION:-Formation of core with quarry stones (rough angular) weighing 1 kg to 50 kg, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
10724.56
25016108
2332.6
Formation of armour layer with quarry stones (rough angular) weighing 1 T to 3 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
2682
6256033
2332.6
Formation of Toe armour layer with quarry stones (rough angular) weighing 0.5 T to 1 T, loading at quarry, conveying in contractors transporting by tippers / lorries including weighing in the electronic weigh bridge for the purpose of measurment, Unloading/dumping placing in position to required level, profile using crane and devices as per the drawings and specification etc., as directed by the Department Officers. ( The payment shall be made on weight basis (ie) laden weight minus unladden weight). The contractor has to make his own arrangements for weigh bridge in the presence of Department Officers.
2783.6
6493025
2332.6
Earthwork excavation by mechanical means in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.
5660.3
430748
76.1
TALACHUA-PARKING AREA DEVELOPMENT-Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
15
26460
1764
Quarrying, collecting and supplying good moorum from approved quarry with all leads, lifts and delifts including cost, conveyance, royality taxes of all materials etc. complete and spreading the same in layers not exceeding 22.5cm and consolidation with PRR including watering etc. complete With all leads, lifts and delifts etc. complete as per specification and direction of the Engineer in charge.
45
94684
2104.1
P.C.C of (1:3:6 ) 40 mm size chips includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge.
30
205416
6847.2
Supplying, fitting & fixing of Paver block of 60 mm size ( Jumbo coloured) including cost and conveyance of all materials with all taxes, royalty, labour and labour cess, T&P required for the work etc. complete as directed by the Engineer-in-Charge.
300
324120
1080.4
Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications as per specification and direction of Engineer-in-Charge.
83.2
17205
206.8
Filling in foudation and plinth with filling sand from approved quarry with all leads, lifts and delifts including cost, conveyance, royality, taxes, Labour & labour cess, well watering etc. complete as per specification and direction of the Engineer in charge.
4.16
7338
1764
Providing and laying reinforced cement concrete in concrete mix M25 for Strip footing excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
24.96
219747
8804
Providing and laying reinforced cement concrete in concrete mix M25 for Column excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
0.65
10951
16849
Providing and laying reinforced cement concrete in concrete mix M25 for Beams excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-Charge including shuttering, mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge.
2.11
22988
10895.2
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Strip Footing including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees,etc. all complete as directed by the Engineer-In-Charge.
4.99
464652
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for Plinth Beams including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.74
68906
93116.8
Supply of Fe500D steel confirming to IS specification of SAIL/ RINL/ TISCON/ Electro steel brands for column including cutting, straightening, bending , binding & plaving the grills in position for RCC works including cost of binding wire of 16 to 18 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer-In-Charge.
0.73
67975
93116.8
Brick work with 1st class K.B.bricks (25cm x12cmx8cm) size having C/S not less than 75Kg/cum in C.M.(1:4) in foundation and plinth including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
10.93
64473
5898.8
16mm thick cement plaster (1:6) with standard water proofing compound including cost and conveyance of all materials with all taxes, royalty, labour, labour cess,and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
119.7
32630
272.6
Priming one coat with approved Water bound cement primer including cost of Primer to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
138.06
9512
68.9
Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of weather coat to make it finished smooth & even surface, materials, taxes , labour, labour cess, and T&P etc. required to complete the work in all respect as directed by the Engineer-in-Charge.
138.06
11859
85.9
Supplying, fitting & fixing of Stainless steel gate of approved design including cost,conveyance, fabrication charges,labour,T&P required to complete the work in all respect as directed by the Engineer-in-Charge.
7
73832
10547.5
TALACHUA-BOREWELL:- Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(0-100 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
100
169200
1692
Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(101-200 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
100
204510
2045.1
Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth(201-260 Mtr) below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.
60
140094
2334.9
Supply of all labour & T&P for Lowering the following size G.I/PVC Pipes with or without slotted pipes as per the necessity from ground level and fitted up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign from above excluding cost of fittings & jointing materials.
260
29328
112.8
Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment adn labour as per the direction of Engineer-in-Charge
1
29594
29594.2
Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia P.V.C Casing pipe etc all complete as per the direction of the Engineer-in-charge. (Including the cost of Cement)
1
9817
9817.6
Supplying all lbour, T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel etc complete as per specification and direction of the Engineer-in-charge.
1
3300
3300.2
Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mts. Elow ground level including cost of cement all complete as per the direction of Engineer-in-charge
1
3273
3273.6
Providing supplying fitting and fixing of 5 HP 3 Phase oilfiltered 100mm dia borewell submergable pump set of KSB/ kirlosker/ crompton/texmo and other IS make with control pannel including 2.5sqmm three core PVC coated copper flat cable, 32mm dia HDPE pipe / nipple / bolt and PVC coated 6mm wire rope , U bolt , M.S clamp with all labour, T&P, taxes as applicable at site as per specification and direction of engineer in charge.
1
43610
43610.4
Supplying all labour T&P, materials for Fitting & fixing of 200mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (200mm Sch-80 Pipe)
67
153463
2290.5
Supplying all labour T&P, materials for Fitting & fixing of 150mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (150mm Sch-80 Pipe)
190
286482
1507.8
Supplying all labour T&P, materials for Fitting & fixing of 150mm Sh-80 pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(150mm Sch-80 Pipe)
3
4523
1507.8
Supplying all labour T&P, materials for Fitting & fixing of reduce socket including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (8" x 6" Reduce Socket)
2
5960
2980
Supplying all labour T&P, materials for Fitting & fixing including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(8" x 12" S. P.)
1
3200
3200
Supplying all labour T&P, materials for Fitting & fixing of 8"UPVC bend including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.
15
7200
480
Supplying all labour T&P, materials for Fitting & fixing of including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (Filter Fitting (30 Mtr))
30
14499
483.3
Supplying all labour T&P, materials for Fitting & fixing of 200mm PVC cone including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge.(200mm PVC Cone)
1
2500
2500
Supplying all labour T&P, materials for Fitting & fixing of pipe including cost, conveyance, taxes, Labour & labour cess, etc. complete as per specification and direction of the Engineer in charge. (75mm Sch-80 Pipe)
50
33750
675
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements