Central Water Commission Tender

Brickwork with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks

12 mm cement plaster of mix : 1:6 (1 cement: 4 coarse sand)

Commercial ply with Coir veneered board Wall Paneling Providing and fitting of aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge.(The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work and also includes 12 mm commercial ply with Coir veneered board of 4 mm thick. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment

UPVC louver Wall Paneling Providing and fitting of aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge.(The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work and also includes 4 mm thick UPVC louver panel. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment

Cabinet for TV UNIT Base, Filling Cabinet (loft) & Filing Cabinet (Down) Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 & Coir veneered board of 4 mm thick with Hydraulic door closer tubular type Aluminium section body for cabinet as per instruction of Engineer-in-charge

Repair & Modification of Conference Table Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 & Coir veneered board of 4 mm thick and providing and fixing wooden molded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete- 2 nd class teak wood 50 x 20 mm for 10 sqm for conference table modification as per instruction of Engineer-in-charge

Main Door modification with paneling Providing and fixing Ply wood 5 ply with commercial ply on both faces 6 mm thick and coir veneered board 4 mm thick with Hydraulic door closer tubular type Aluminium section body Zinc alloy (white powder coated) handles with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key for uPVC casement door with Door eye

False Ceiling Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fiber and natural filler false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non- combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 & 7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanized iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15 x 42 mm of length 3000 mm, cross - T of size 15 x 42 mm of length 1200 mm & secondary intermediate cross- T of size 15 x 42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm. Galvanized iron perimeter wall angle of size 22 x 19 x 0.40 mm of length 3000 mm to be fixed 52.007 Sqm on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 1.75 sqm)

32 - 40 watts, LED As on Required: CRCA MS housing with milky opal diffuser, Surface mounting through screws.

Electric wiring including wire 1 sq.mm, 2.5 sq.mm,1.5 sq.mm wire, 8 Module, 6 Module, 3 Module and 12 Module PVC Box, Sockets (15 amp/ 10 amp), switches (15 amp and 10 amp) etc. complete.

Single Phase Cassette Ceiling 2 Ton Air Conditioner sleek and elegant styling helps it blend perfectly into the ceiling. An LCD cordless remote. Features Like Auto Cool, Sleep mode, Dry Mode & On/ 0ff Timer extra. Cycle design. Soft start, Silent working and smooth stop ensure quite operation.

Copper Pipe coated with insulator and 4 core wire of 1.5 mm

Installation charges of Air Conditioner

Repairing of chairs: Includes 600 mm foam , 2 mm resin cover along with PVC bending and leg enamel polish and color

9- Unit Rack with accessories: Size: 450 x 500, 4 x PDU, Cable manager, Related accessories

3D LED glow sign board: ECO Vinyl sticker to be pasted on the acrylic sheet and will fitted with a box with sheet of 3 mm acrylic sheet and LED lights to be fixed on the back

Chairman unit microphone: A 27 cm super cardioid pickup pattern host microphone unit, priority function for host with capacitive touch buttons, frequency response of 60 to 20,000 Hz. built in loudspeaker with volume control & 3.5 mm headphone interface, 6 pin connectivity with base station

Delegate unit microphones: A 27 cm super cardioid pickup pattern delegate unit microphone, capacitive touch buttons, frequency response of 60 to 20,000 Hz. built in loudspeaker with volume control & 3.5 mm headphone interface, 6 pin connectivity with base station

Central Control Unit with 4" Touch Screen & 3rd Gen of audio processing algorithm Noise suppression 1x Balanced Audio Input and Audio Output interface. 1x Unbalanced Audio Input and Audio Output Interface 2x 25 Watts @ 4 Ohm Amp Output. Max NOM up to 8 Conferencing Modes: Normal and Voice Activation. RS-232, RS-485 and RJ-45 Control port. 4x Aviation 6-Pin Interface, Inbuilt recording with Playback

Wall Mount Speakers with 5 Inches Driver and 1 inch High Frequency Driver, 100 V tapping, frequency response of 60 Hz to 20,000, Maximum SPL of 104 dB transformer tapping of 30 W, 15 W, 7.5 W, 3.75 W or more

240 Watts or more Mixing Amplifier 4 or more microphone inputs with Individual Phantom Power Line Inputs x2, Mixed Line Output x1 Individual Gain Control for Microphone Inputs 4-16 Ohm, 100V or more Output AC & DC Operation with Auto Cool Function

HDMI 1.4 ACTIVE cable as required for active Popup Box (10 mtr)

Speaker Cable, Microphone cable, Audio cable & other related cables & connectors for implementation

HDMR Board with wooden finish

Window Screen /Roller Blinds (black out)