Bridge And Roof Company India Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 28,35,000Document Cost
₹ 59,000Tender Fee
Refer Documents
Summary
Construction Of 4 Nos Rcc Industrial Buildings For 5th Stream Alumina Refinery Of National Aluminium Company Limited At Damanjodi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_BandR_766731_1Bid Award Id
ViewTender No
B AND R/HO/51222/TD/ CIVIL WORK/02Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT_Building_Work_NALCO_Damanjodi
BOQ Items
Item No: 1.02
All activities & scope same as in item 1.01 but for excavation below 2M and upto 4 M below existing ground level.
1120
214984
191.95
Item No: 1.03
All activities & scope same as per item 1.01 but for excavation below 4M and upto 6 M below existing ground level.
960
221260
230.48
Item No: 1.04
All activities & scope same as per item 1.01 but for excavation beyond 6M depth below existing ground level.
750
202282
269.71
Item No: 1.05
All specifications scope & activities same as for item no 1.01 but for excavation in SOFT-ROCK as defined in IS:1200 for soil classification and up to a depth of 2M below existing ground level.
450
166450
369.89
Item No: 1.06
Extra over item No.1.05 for every 1 M depth of excavation below 2 M from existing ground level.
270
10592
39.23
Item No: 1.07
Excavation in Hard Rock as defined in IS:1200 for soil classification, including all tools and tackles required for removal of rock by control blasting using appropriate blasting materials, safety precautions and under supervision of Licenced blaster and due permission from local statutory authorities including removal of broken pieces, stacking the same in measurable stacks, and disposal of the same as directed within 1 KM of the nearest edge of excavation, all supervision other incidental expenses, and depths of 2 M below existing ground level all work as per Technical Specification Sec No.1.
835
545781
653.63
Item No: 1.08
Extra over item no 1.07 for excavation at every 1 M below 2 M from existing ground level.
800
34272
42.84
Item No: 1.09
Excavation in hard rock or boulders by pneumatic chiselling or by diamond rope cutting / chemical method or any other suitable method(s) but not blasting, stacking the same in measurable stacks, and disposal of the same as directed within 1 KM of the nearest edge of excavation, all supervision overhead/ profit other incidental expenses, and depths of 2 M below existing ground level all work as per Technical Specification Sec No.1.
78.6
78600
1000
Item No: 1.10
Extra over item no 1.09 for every 1 M excavation of rock below 2 M from GL.
130
5099
39.23
Item No: 1.12
Providing and filling in plinth with selected excavated surplus earth and compatible soil within a lead of 5km in 300 mm layer, compacting at Optimum Moisture Content including watering, transport, machinery, tools/ tackles etc. all as per technical spec. in Sec-1.
1600
217456
135.91
Item No: 1.14
Providing and laying 230 mm thick selected rubble soling under floors, foundation, and in other areas including filling the interstices with selected (approved) earth / murrum / downgraded metal and mechanical compaction by 8 / 10T roller to required level and grades all as per Sec-1 of technical specifications.
2600
942214
362.39
Item No: 1.16
Providing and filling washed, clean and screened gravel / stone agreegate of nominal size 75 mm to 40 mm down grade to required level and grades in trenches, pits etc. complete as per the direction of engineer-in-charge
160
210950
1318.44
Item No: 1.17
Filling around pipes / cables laid in the trenches with very fine river sand free from pebbles, vegetations, shrubs, debris, passing through sieve of 200 microns including compaction all complete as per drawing, specifications and as per the direction of Engineer-in-Charge.
40
56352
1408.81
Item No: 1.17a Filling in Foundations, pits, trenches with selected sand in layers including hydraulic compaction as per sect. 1 of technical Spec.
160
227539
1422.12
Item No: 1.18
Transporting the excavated material of ordinary soil, soft rock or hard rock as available from clause nos. 1.01 to 1.10 beyond 1KM and upto 2 km for the purpose of stacking or filling.
3200
64992
20.31
Item No: 1.18a
Transporting the excavated material of ordinary soil, soft rock or hard rock as available from clause nos. 1.01 to 1.10 beyond 2KM and upto 3 km for the purpose of stacking or filling.
1800
70614
39.23
Item No: 1.18b
Transporting the excavated material of ordinary soil, soft rock or hard rock as available from clause nos. 1.01 to 1.10 beyond 3KM and upto 5 km for the purpose of stacking or filling.
1200
90792
75.66
Item No: 1.18c
Transporting the excavated material of ordinary soil, soft rock or hard rock as available from clause nos. 1.01 to 1.10 beyond 5KM and upto 7 km for the purpose of stacking or filling.
1200
130308
108.59
Item No: 1.18d
Transporting the excavated material of ordinary soil, soft rock or hard rock as available from clause nos. 1.01 to 1.10 beyond 7KM and upto 10 km for the purpose of stacking or filling.
400
62768
156.92
Item No: 1.19
Preparing, dressing up and making side slopes of graded plots at the interface of higher level plot and lower level plot, and covering the same with 230mm thick. dry stone pitching in specified slopes with the excavated rubble.
80
61368
767.1
Item No: 1.21
Excavation in ordinary soil or filled up material for forming the subbase for receiving the road soling and compacting the sub base at Optimum Moisture content (O.M.C.) with 8 to 10 T roller, to proper grade and camber and elevation including all labour, supervision, plant/equipment, disposal of earth into road embankment or otherwise as directed etc. complete as per drawings for BOX CUTTING USING MECHANICAL EQUIPMENTS.
80
21520
269.01
Item No: 2.00
CONCRETING AND FORMWORK
(Refer Section 2.0 of Technical Specifications)
-
-
-
Item No: 2.01
Providing, mixing, placing in position, Plain Cement Concrete of Grade M-15 as per IS:456 under foundations, floors, plinth beams etc. including compaction by vibration, curing, using 20 mm down aggregate all per sec 2 of tech-spec. but excluding formwork.
400
2232636
5581.59
Item No: 2.02
Providing, mixing, placing in position, Plain Cement Concrete of Grade M-20 as per IS:456 as structural concrete including compaction by vibration, curing, using 20 mm down aggregate all per sec 2 of tech-spec. but excluding formwork.
60
337902
5631.71
Item No: 2.04
Supplying and placing in position Concrete of grade M-30 using 20 mm down coarse aggregate as per IS:456 in Reinforced Cement Concrete foundations, tie beams, plinth beams, columns, portals, slabs, walls, curved walls, retaining walls, pedestals etc, including transportation, compaction, vibration, curing and finishing all as per Section 2 but excluding formwork and reinforcement. All from foundation level to top of plinth level.
4400
26770788
6084.27
Item No: 2.05
All activities and scope same as 2.04 but from above plinth level and upto +6m
1600
11354496
7096.56
Item No: 2.06
All activities and scope same as 2.04 but from above +6m and upto +12 m.
800
5677248
7096.56
Item No: 2.07
All activities and scope same as 2.04 but from above +12 m and upto +18 m.
800
5839216
7299.02
Item No: 2.08
All activities and scope same as 2.04 but from above +18 m and upto +24 m.
100
770394
7703.94
Item No: 2.14
Providing, mixing, placing in position plum cement concrete of Grade M-15 and adding 100 mm to 150 mm size stones to maximum of 30% by volume of mass concrete all complete as per Standard drawing number PIN-LEP-CVC-1004.
80
336544
4206.8
Item No: 2.16
All activities same as 2.04 but for Liquid retaining structures by adding waterproof admixture of approved make including hydro-testing and stopping leakages by way of injection or pressure grouting. The cost of injection/pressure grouting, if required, to be considered by the Contractor at no extra cost to the Owner. Achieving water tight concrete is the responsibility of the Contractor.
60
386031
6433.85
Item No: 2.17
Providing and fixing wrought timber formwork for concrete elements like foundations, rafts, footing, pedestals, pile caps, plinth beams and tie beams at various levels below plinth and at required slopes as per drawing and specifications including materials, making, fixing, supporting maintaining and after concreting stripping at appropriate time, all as per Technical Specification Section 2.
1600
329552
205.97
Item No: 2.18
Providing and fixing smooth formwork of steel plates or marine plywood for concrete elements in foundations, rafts, beams, columns, portals, slabs, walls, pedestals, liquid retaining structures, pits etc at various levels below plinth and at required slopes as per drawing including making, materials, fixing, supporting, maintaining during and after concreting stripping at appropriate time, all as per Technical Specification Section 2.
9600
2595936
270.41
Item No: 2.19
All activities and scope same as 2.18 but in Superstructures above plinth and upto + 6 m.
4800
2343792
488.29
Item No: 2.20
All activities and scope same as 2.19 but above + 6m and upto 12 m.
3200
2214880
692.15
Item No: 2.21
All activities and scope same as 2.19 but above +12 m and upto 18 m.
3600
2789316
774.81
Item No: 2.22
All activities and scope same as 2.19 but above +18 m and upto 24 m.
640
553715
865.18
Item No: 2.25
Providing pockets, holes, blockouts in concrete for bolts, embedments, sleeves etc by using boxes of timber or any suitable material and removing the same at appropriate time without damaging the concrete, Pockets up to 200 x 200 x 750 deep in size.
240
151656
631.9
Item No: 2.26
All activities and scope same as 2.25 but for size above 200 x 200 x 750 and upto 300 x 300 x 1000 deep in size.
60
42873
714.56
Item No: 2.27
All activities and scope same as item 2.25 but for size above 300 x 300 x 1000 and upto 500 x 500 x 1500 deep in size.
1.6
1341
838.56
Item No: 2.28
Providing grouting for base plates, anchor bolts and pockets with cement : sand :Grit - 1:1:1 with all materials, including formwork, finishing and curing as per Technical Specification Section 2 all complete at all heights and depths.
4
29369
7342.45
Item No: 2.30
All activities and scope same as 2.28 but for Non-shrink grout with minimum compressive strength of 650 kg/cm2 using, Conbextra -GP2 of M/s. Fosroc OR equivalent, as per manufacturers specifications all complete at all heights and depths.
2
96256
48128.43
Item No: 2.31
All activities and scope same as 2.28 but using non shrink epoxy grouting with minimum compressive strength of 800 kg/cm2 using Conbextra-EP grout of M/s. Fosroc OR equivalent, as per manfacturers specification all complete at all heights and depths.
2
793418
396709.1
Item No: 2.32
Providing and fixing 150 mm wide serrated face PVC water stop of approved make in construction or expansion joints of concrete elements as shown in drg. including jointing by thermal welding all complete at all heights and depths.
60
12273
204.56
Item No: 2.33
All activities same as 2.32 but for 200 mm wide water stop all complete at all heights and depths.
16
3272
204.56
Item No: 2.34
All activities same as 2.32 but for 300 mm wide water stop all complete at all heights and depths.
16
4797
299.84
Item No: 2.35
Providing and Laying Polyurethane hydrophilic sealant of M/s Sika make or equivalent as water-stop in horizontal and vertical joints of liquid retaining structures all complete at all heights and depths and as per manufacturer's recommendation and as per the direction of Engineer In Charge.
10
1814
181.44
Item No: 2.36
Providing and fixing smooth formwork of steel plates or marine plywood for concrete elements having curved surfaces as per drawing and at any height and depth including making materials, fixing, supporting, maintaining during and after appropriate time all levels. The formwork and staging shall be designed by the Contractor and the same shall be approved by Engineer In Charge.
200
117272
586.36
Item No: 3.00
MASONRY WORKS
(Refer Section 3.0 of Technical Specifications)
-
-
-
Item No: 3.01
Supplying and constructing flyash Brick Masonry with OPC Cement in cement mortar 1:6 in foundations, substructures, walls, pillars chambers, etc. including scaffolding, curing, raking of joints etc. all as per Section-3 of technical specifications.The rate shall include all tools, tackles, labours, consumables etc.
60
253080
4218
Item No: 3.02
All activities same as 3.01 but in superstructures, walls, pillars, chambers, etc. in 1:5 C.M. including scaffolding, curing raking of joints etc. all as per Section-3 of technical specifications and at all heights.
1800
9577206
5320.67
Item No: 3.03
All activities same as 3.02 but in 115mm walls in 1:4 CM including 150mm thick RCC stiffener at every 900mm laid in concrete M15 with 4nos-8mm tor bars & 8mm tor ties at 300mm centre to centre including formwork, cutting, bending & binding of reinforcement, concrete, all complete.
48
49094
1022.81
Item No: 3.04
Providing and constructing random rubble masonry in C.M. 1:6 including scaffolding, curing, raking of joints etc. All as per section three of technical specifications in foundations for walls and pillars upto plinth.
60
264891
4414.86
Item No: 3.05
All activities same as 3.04 in superstructure walls of all thicknesses and in pillars of all sizes at all heights.
16
86431
5401.94
Item No: 3.06
Supplying and applying 12mm thick plaster in cement mortar 1:6 over interior surfaces of masonry and concrete including scaffolding, curing, finishing with lime Neeru at all heights as per Section-3 of technical specification. The rate shall include all tools, tackles, labours, consumables, etc.
12000
2564040
213.67
Item No: 3.07
All activities same as 3.06 but for 6mm thick (in cement mortar 1:3) on ceilings, slab soffits, RCC etc.
4800
897840
187.05
Item No: 3.09
All activities same as 3.06 ON EXTERIOR FACES OF AN ENCLOSURE, on piers, in C.M 1:4, 20 mm thick, in two layers.
6480
2079108
320.85
Item No: 3.10
All activities same as 3.09 but for sandfaced plaster with coarse grained sand
80
26732
334.16
Item No: 3.12
Extra for using approved water proofing agent as per manufacturer's specifications and as mentioned in the Technical Specification and drawing.
80
4035
50.44
Item No: 3.13
Providing & applying flush pointing 1:3 in random rubble masonary walls, piers, stone pitching etc at all heights including scaffolding, raking, cleaning and curing.
4000
823880
205.97
Item No: 3.17
Providing and applying flush pointing 1:3 in brick or block masonary work at all heights including scaffolding, racking, cleaning and curing for recessed type 10 to 12 mm deep.
200
27742
138.71
Item No: 4.00
REINFORCEMENT WORKS
(Refer Section 4.0 of Technical Specifications)
-
-
-
Item No: 4.01
Providing Reinforcement steel in RCC works at all heights and depths, as per drawing and specifications including preparation and obtaining approval of bar bending schedule, straightening, decoiling, removing mil-scales and rust, cutting, bending to required shape, placing, binding in position, welding wherever required, supply of approved type of binding wire, mechanical anchorage, etc. all as per section FOUR of technical specifications and for High Yield strength Deformed (HYSD) TMT bars conforming to IS:1786 grades : Fe 500
1000
67878810
67878.81
Item No: 5.00
FLOORING, SKIRTING AND DADO
(Refer Section 5.0 of Technical Specifications)
-
-
-
Item No: 5.01a
Providing and laying RCC flooring and grade slabs to proper grades and slopes as shown in the drawings, in panels of approved sizes, providing construction and expansion joints as per drawing including formwork, dressing and compaction of sub- grade, finishing, as specified, curing etc. BUT EXCLUDING REINFORCEMENT all complete as per section FIVE of technical specification for floors in concrete of grade M-30 with local thickeners as detailed in drawing.
Rate shall include preparation of joints of all types, providing bitumen impregnated fibre board / Shalitex pad, polysulphide joint sealant on top of the board, tie-rods, mild steel dowel bars, compressible filler, PVC end cap, complete as per drawing.
4000
27377480
6844.37
Item No: 5.04
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with approved 25thk Kotah Stone, of approved size and colour with ground mass of white cement
400
441908
1104.77
Item No: 5.05
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with 150 mm high skirting with machine polishing for Kotah Stone , of approved size and colour with ground mass of white cement
200
39232
196.16
Item No: 5.08
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with dado of all heights as per drawings including white cement pointing for glazed tiles.,of approved size and colour with ground mass of white cement
310
207616
669.73
Item No: 5.12
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with flooring with full body white Vitrified Ceramic tiles(Grade-1) ,of approved size and colour with ground mass of white cement
1164.4
1260288
1082.35
Item No: 5.13
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with flooring with anti-slip Ceramic tiles ,of approved size and colour with ground mass of white cement
82.4
108465
1316.33
Item No: 5.15
Providing and laying flooring, with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with flooring NATURAL GRANITE STONE SLABS - prepolished in factory with premium quality( grade-1) of approved texture and quality,of approved size and colour with ground mass of white cement
78.4
199426
2543.7
Item No: 5.18
Providing and laying 40 to 50 mm thick Indian patent Stone Flooring with M-15 grade cement - grit concrete including curing and finishing as specified.
300
108024
360.08
Item No: 5.20
Providing and laying 50 mm thick sand bituminous carpet on foundations at all heights with hot bitumen (60/70, 90/15, 75/15 ,115/15 or 135/10 grade) and 2 mm size sand mixed in proportion of 1:6 by volume including mixing, laying and compacting to line and grade etc. as directed & as per Technical Specification Section 5.
40
18662
466.57
Item No: 5.22
Providing and finishing existing or newly laid concrete surfaces of floor / grade slab / pavement, trenches with Heavy Duty non metallilc hardener like Heavy duty Nitoflor hardtop of M/s Forsroc make or equivalent all complete as per manufacturer's recommendation and Technical Specification.
2240
178908
79.87
Item No: 5.25
GRANITE WALL CLADDING: Stone work 18 to 20 mm thick (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 18 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins. The cramps shall be in stainless steel of required size and shape for anchoring stone wall lining to the backing and/ or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls
wherever required. The Item includes making V Grooves and half sets at the joints and including the cost for scaffolding required etc. complete.
16
53286
3330.41
Item No: 5.26
GRANITE CILLS FOR WINDOWS: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
306
930784
3041.78
Item No: 6.00
DOORS, WINDOWS, VENTILATORS
(Refer Section 6.0 of Technical Specifications)
-
-
-
Item No: 6.15
C - STEEL DOORS: Providing, fabricating and fixing in position single shutter doors, including frames as per specification & tkIS India standard drawings - PIN-LEP-CVS-1030. including mild steel hold fast, oxidised brass fittings and one coat of red oxide primer.
12
66664
5555.36
Item No: 6.19
D - STEEL WINDOWS
Providing, fabricating and fixing openable steel windows, including frames using standard sections conforming in all respect to IS 1038 including MS hold fasts, oxidised brass fittings and one coat of red oxide primer including fully glazed shutters with ordinary 4 mm thick sheet glass.
4
16667
4166.87
Item No: 6.21
E - ALUMINIUM DOORS
Providing fabricating and fixing aluminium doors including frames with standard extruded sections as per specification in Tkis Indian standard drawing -PIN-LEP-CVS-1031 having min 3mm wall thickness, swinging shutters with floor springs and pivots or Aluminium hinges, opening both ways and with fully glazed panels using 6mm thick ordinary sheet glass with anodised aluminium fittings.
58.8
383294
6518.61
F - AL. WINDOWS & PARTITIONS
-
-
-
Item No: 6.24
Providing, fabricating and fixing aluminium window frames and shutters with standard extruded sections having 3mm (min) wall thickness, for fixed type shutters glazed with 4 mm thk glass sheet all complete with anodised aluminium fittings.
23.6
140811
5966.58
Item No: 6.25
Providing, fabricating and fixing aluminium window frames and shutters with standard extruded sections having 3mm (min) wall thickness, for Sliding type shutters glazed with 4 mm thk glass sheet all complete with anodised aluminium fittings. the item also includes MS 50 grills for all windows
192.4
1262673
6562.75
Item No: 6.26
Providing, fabricating and fixing aluminium partitions as per drawing including aluminium frames and shutters with standard extruded sections having 3mm (min) wall thickness, & 4 mm thk glass sheet for top portion etc. all complete with anodised aluminium fittings in accordance with technical specification 6.3.2.3.
478.4
3981833
8323.23
Item No: 6.29
G - VENTILATORS & PARTITIONS:
Providing, making and fixing aluminium ventilators with anodised aluminium fittings, top hung shutters fully glazed with 4mm thick ordinary glass sheet.
16
77777
4861.11
Item No: 6.33
H - PVC DOORS AND WINDOWS
Providing, making and fixing uPVC doors, including frames of sintex make or equivalent with oxidised brass hinges to fillings, min thickness of section 2.8 mm, all as per manufacturess specifications complete.
19.6
70081
3575.6
Item No: 6.40
I - SPECIAL GLAZING
Providing and fixing 2 hours fire resistant glazed steel windows including frames and all necessary accessory as per manufacturer standard and Technical Specification
The test report for the complete system (Glazed Window) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer & accepted by the concerned approving statutory bodies. Contractor to submit necessary certification along with the detailed drawing for the same. (Actual glass size is to be measured at site for payments).
74.8
1341258
17931.26
Item No: J - SPECIAL DOORS
-
-
-
Item No: 6.41
Providing and fixing airtight and sound insulated doors as per tech. spec.
8
43327
5415.95
Item No: 6.42
Providing and fixing 2 hours fire resistant, single shutter steel doors With vision panel as per manufacturer standard and technical spec. Refer standard drawing - PIN-LEP-CVS-1033
55.2
989805
17931.26
Item No: 6.43
Providing and fixing 2 hours fire resistant, double shutter steel doors With vision panel as per manufacturer standard and Technical Specification. Refer standard drawing - PIN-LEP-CVS-1033
27.6
519651
18827.96
K - ROLLING SHUTTERS
-
-
-
Item No: 6.45a
Providing, fixing in position standard gear operated type grilled rolling shutter with panel of 18g steel sheet including guides, hoods, locking arrangement all complete as per specifications , manufactured out of 8mm Dia M.S. bars instead of laths, as per design approved by Engineer-In-Charge.
301.2
1025486
3404.67
Item No: 6.46
Providing, fixing in position standard 2 hours fire resistant gear operated steel rolling shutters as per manufacturer standard and technical specification, fabricated from steel sheet including guides, hoods, locking arrangement all complete as per specifications.
39.2
773206
19724.66
Item No: 6.48
SOLID CORE DOOR
Providing and constructing single leaf solid core opaque door consisting of 38mm thick block board shutter finished in 1.5mm thick approved hot pressed laminate on both the sides. The edges to be in 12mm thick seasoned TW lipping finished in approved melamine polish. The frame to consist of PRESSED MILD STEEL of section 100x50mm and finished in approved paint. The rate to include SS ball bearing hinges Ozone SS-551 / Hettich 142381 or equivalent - 4 Nos. per shutter, Handles , mortise lock, Door Stopper, Exposed door closer of Ozone TS 72 make or equivalent.
16
83449
5215.59
Item No: 6.49
ALUMINIUM GLAZED LOUVERED VENTILATOR
Providing and fixing of annodised aluminium glazed louvered ventilator with frictionless lever for movement of glazed louvers. The glazing shall be 4mm thick frosted glass
8
27775
3471.92
Item No: 7.19
Supplying, fabrication, alignment, fixing foundation bolts as per drawing for all diameter including jigs, templates and fixtures.
4
345466
86366.51
Item No: 7.28
Supplying, fabricating, installation of INSERT PLATES, Puddle flange and other concrete embedments including cutting, welding, welding of lugs, tools, tackles, consumables and installing at all heights and depths.
Note: The embedments shall be blast cleaned and painted over external surface with RED Oxide t (35 Micron DFT) for protection against corrosion.
10
651629
65162.99
Item No: 7.29
Alignment, fixing, including jigs and fixtures foundation bolts supplied by others
-
-
-
Item No: 7.29
ii) upto 20 mm dia.
1.2
21972
18310.26
Item No: 7.29
iiii) above 20mm and upto 40mm dia..
4
83704
20926.11
Item No: 8.09
Supply and fixing of uPVC rain water downtake pipes conforming to IS 13592 Type A including all fittings, jointing and fixing with 50x6 mm clamps and bolts at every joints, all complete for the following nominal outside diameters:
-
-
-
Item No: 8.10
110mm diameter
120
48337
402.81
Item No: 8.11
160mm diameter
1000
425930
425.93
Item No: 9.00
PAINTING
(Refer Section 9.0 of Technical Specifications)
-
-
-
ON CONCRETE & PLASTERED SURFACES
-
-
-
Item No: 9.02
Supplying and applyingcement base primer and three coats of Oil Bound Washable Distemper including scraping, crack filling with putty, scaffolding, all tools and tackles, brushes etc. complete.The rate shall include all tools, tackles,labours,consumables etc
80
8910
111.38
Item No: 9.06
All scopes and activities same as 9.01 but with primer and 3 coats of plastic / acrylic emulsion paint.
13200
1905024
144.32
Item No: 9.08
All scopes and activities same as 9.01 but with cement based primer and 3 coats of waterproof cement based paint as per IS:5410 for EXTERNAL SURFACES.
50
4133
82.67
Item No: 9.09
All scopes and activities same as 9.01 but with base coat of waterproof cement paint (@ 2.2 kg/10 SQ.m) and Two coats of Exterior acryllic emulsion paint (@1.7 Ltr / 10 SQ.M)
4400
594924
135.21
Item No: 9.11
Providing and applying coal tar epoxy paint on RCC structures, including scraping crack filling, scaffolding, all tools and tackles, brushes, additional working space, if required.
32.4
4970
153.42
Item No: 9.12
Providing and applying two coats of Bituminous coating (each coat 1.25 to 1.5 kg/ SQ.M) on RCC foundations / columns/ pedestals etc. as per Technical specifications
40
7594
189.85
Item No: 10.00
WATERPROOFING
(Refer Section 10.0 of Technical Specifications)
-
-
-
Item No: 10.01
Providing and applying water proofing layer over terraces, below underground bases, basements, etc. including all materials, admixtures, grouting etc. as specified in the drawings, all complete as per section TEN of technical specification and as stipulated by patents owned by respective suppliers and guarantees for box type waterproofing as per INDIA Waterproofing Co., or equivalent specifications for basements, underground pits, rafts walls, with 38 mm to 40 mm thick Shahabad tiles with 10 years guarantee.
47.2
54525
1155.2
Item No: 10.03
Providing and laying three layer treatment consisting of first layer of screeding with C.M. 1:2, 2nd layer of brick bat laid in C.M. 1:3 including waterproofing agent to an average thickness of 125 mm, 3rd layer of 40 mm to 50 mm thick IPS concrete (M-15 grade) finished smooth including waterproofing agent on terrace of building, inside of gutters etc. laid to proper slopes and grades .
141.2
157971
1118.78
Item No: 10.10
Providing and laying 40 mm thick damp proof course in M-20 grade concrete with 12mm to 6mm graded aggregate including supplying and mixing approved water proofing agent.
78.4
19827
252.9
Item No: 10.13
Providing and applying, thermal and accoustic insulation over roof - 50 mm thick as per Clause 10.7 of Technical Specification Section 10.
106
335795
3167.88
Item No: 10.16
Providing and laying APP (Atactic Polypropylene Polymer) modified pre fabricated five layer, 3-4 mm thick water proofing membrane black finished reinforced with polyester / glass fibre matt over and including grading of slope 1:80 with screed concrete 1:2:4 with 12 mm down graded aggregate and minimum thickness of 25 mm. The membrane to be laid over a coat of bitumen primer by using butane torch and finally painted with aluminium paint. The laying of the membrane to be done as per the specifications provided by the manufacturer.
Approved Manufacturers: Bitumat Co. Ltd., Pidilite, Soprema, General Membrane, Tamko, STP Ltd.
3000
2786790
928.93
Item No: 11.00
SANITARY AND PLUMBING
(Refer Section 11.0 of Technical Specifications)
-
-
-
Item No: 11.01
Supply, install and test white glazed sanitary wares of approved make and type including filling of joints wherever required with cement or any other approved sealant complete in all respects as per section ELEVEN of technical specifications and for Western style commodes as per IS-2556 including PVC seat covers and top including C.P. brass 25 mm dia. flush cock of Prince or equivalent, health fauct, bib cock, painting of all exposed metallic surfaces with 2 coats of approved shade and quality Synthetic enamel paint over a primer coat of red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing, all complete.The rate shall include all tools, tackles, abours, consumables etc
6
74028
12338.07
Item No: 11.05
Provide, install and test Sink of size 530 mm x 450 mm with swevel spout.
6
23630
3938.49
Item No: 11.06
Provide and install Stainless steel finish Toilet paper holder fitted in wall.
6
2530
421.73
Item No: 11.07
Provide and install Glazed ceramic Soap dish in wall
4
378
94.57
Item No: 11.09
Provide and install waste water piping and fittings for drainage of waste water including laying, jointing, testing etc. complete as per section ELEVEN of technical specifications for 100mm dia. round stone ware glazed pipes of spigot and socket type.
16
3665
229.08
Item No: 11.14
Provide and install C.P. bottle trap under urinals and wash basin.
14
8925
637.5
Item No: 11.15
Provide and install C.I. floor trap with C.P. brass gratings.
16
18046
1127.88
Item No: 11.16
Provide and install C.I. gulley including providing brick chamber and C.I. cover of size 300mm x 230mm.
2
16221
8110.96
Item No: 11.18
Provide and install uPVC pipes conforming to IS 13592 Type B for drainage of waste water including fittings, laying, jointing, testing etc. complete as per section ELEVEN of technical specifications for the following nominal outside diameters:
-
-
-
Item No: 11.18-i
50mm
27.6
17034
617.18
Item No: 11.18-ii
75mm
51.2
42109
822.45
Item No: 11.18-iv
110mm
82.4
101307
1229.46
Item No: 11.24
Provide and construct manhole chamber of 230 mm thick flyash brick wall in C.M. 1:4, P.C.C. M-15 grade in base slab, plastering on either side with 20 mm thick C.M. 1:4, benching for pipe to channelise the flow, C.I frame and 50 Kg. Rating cover including excavation, back- filling etc, complete in all respects as per relevent technical specifications as applicable for various works for 600 mm x 600mm and upto 2000mm deep manhole.
4
77365
19341.46
Item No: 11.25
All activities and scope same as 11.24 but for 900 mm x 1200 mm and upto 3000mm deep manhole.
2
92307
46153.58
Item No: 11.29
Providing and laying C.I soil pipes 100 mm dia under floors, inside buildings, jointing with cement, testing for no leakage, including all fittings, cleaning and/or flushing out, traps etc. complete in all respects.
31.6
64751
2049.1
Item No: 11.30
Providing, installing, jointing,testing, pipes, pipe fittings, valves, flexible connections, as specified for water supply inside and outside buildings, all as per drawing and section ELEVEN of technical specifications for 12mm bore G.I. piping of Class 'including all necessary fittings.
31.6
6043
191.25
Item No: 11.31
All activities and scope same as 11.30 but for 20 mm bore G.I piping of class 'C' including all necessary fittings.
35.6
8080
226.98
Item No: 11.32
All activities and scope same as 11.30 but for 25 mm bore G.I piping of class 'C' including all necessary fittings.
19.6
5684
290.03
Item No: 11.33
All activities and scope same as 11.30 but for 32 mm bore G.I piping of class 'C' including all necessary fittings.
16
5514
344.67
Item No: 11.34
All activities and scope same as 11.30 but for 40 mm bore G.I piping of class 'C' including all necessary fittings.
12
4859
404.92
Item No: 11.35
All activities and scope same as 11.30 but for 50 mm bore G.I piping of class 'C' including all necessary fittings.
55.2
26914
487.58
Item No: 11.38
Provide, install and test valves and taps of C.P. brass gun metal as specified, for 12 mm dia. C.P. pillar tap on wash basins.
2
2523
1261.69
Item No: 11.39
All activities and scope same as 11.38 but for 12 mm dia C.P. bib cocks.
4
1210
302.63
Item No: 11.40
All activities and scope same as 11.38 but for 20 mm dia .gun metal gate/globe valves.
4
1328
332.06
Item No: 11.42
All activities and scope same as 11.38 but for 40 mm dia gun metal gate/globe valves.
2
979
489.68
Item No: 11.43
All activities and scope same as 11.38 but for 50 mm dia gun metal gate/globe valves.
4
2507
626.99
Item No: 11.45
Provide, install and test 12 mm dia. PVC flexible connection 450 mm long.
8
2303
287.93
Item No: 11.46
Providing and fixing Mirror in size 600mmx450mm & 6mm thk. glass of make modiguard/ saint gobain etc or equivalent complete with flat polished edges, fitted on site on 12 mm marine ply base, base having wooden lipping border and finished with laminate if instructed. The mirror shall be either pasted on the ply with silicon adhesive or fitted with stud-head screws with air gap in between (minimum 6 nos average per location) or both as per approval complete to the Engineer's satisfaction.
8
7409
926.13
Item No: 11.47
Provide and install 16 mm dia. & 450mm long C.P. brass towel rods.
4
5430
1357.67
Item No: 11.48
Provide, install and test C.P. Soap dispenser over wash basins, sinks etc. as specified.
6
6149
1024.9
Item No: 11.49
Provide, install and test PVC tanks of sintex make or equivalent upto 2000 litres capacity including all fittings.
2
25387
12693.95
Item No: 11.50
Provid, install and test PVC tanks of sintex make or equivalent above 2000 litres & upto 5000 litre capacity.
2
50773
25386.5
Item No: 11.51
Provid and fix HDPE Drain gullies including jointing.
2
2181
1090.76
Item No: 11.52
Providing and installing HDPE pressure pipes conforming to IS 4984 and of Grade PE 80, Pressure rating PN6 including all fittings, labour, tools and tackles, testing all complete for burried sanitary sewer lines of following nominal outside diameter:
-
-
-
Item No: 11.52-i
DN 90 mm
106
33564
316.65
Item No: 11.52-iii
DN 200 mm
443.2
499876
1127.88
Item No: 11.52-iv
DN 250 mm
1721.2
2329592
1353.47
Item No: 11.56
URINALS WITH SENSORS: Providing and fixing in position first quality white Hindware make Gents Sensor Urinal Flow (cat. no. 60021) or equivalent as per approval and making all connections of urinal with other accessories such as flush pipe ,outlet, etc. filling including making chases and holes in floors and walls and repairing the same with cement mortar (1:3) plastering etc. to original condition and painting of fittings etc. complete.
6
118444
19740.78
Item No: 11.57
WASH BASIN WITH SENSORS: Providing and fixing premium quality white vitreous china below counter Oval Wash Hand Basin of Hindware / Jaguar / Johnson/Parriware ( with approx. size 600mmx420mm) fixed over jet black granite counter including edge moulding, CP Brass bottle Trap (Parko or equivalant approve), 32mm dia Waste Coupling (Parko/Plumber/Jaguar), Auto closing Pillar Cock (Jaguar Cat No. PRS-031), including PVC connection etc. complete. as per sample approved.
8
90499
11312.47
Item No: 11.58
ANGLE STOP COCK: Providing and fixing in position Angular Stop Cock with Wall Flange Jaquar make (Cat. No. FLR 5053N), Plumber or equivalent upon approval complete including all required connections and settings for proper functioning to the Engineer's satisfaction.
19.6
18069
921.92
Item No: 11.59
HAND DRYERS: Providing and fixing Premium quality electric hand dryers in toilet
4
12338
3084.52
Item No: 11.60
ROBE HOOK: Providing and fixing Cromium plated brass Robe hooks of best quality in toilet
12
6666
555.53
Item No: 11.61
TOILET SUNK FILLER: Providing & Filling the sunken portion of slab, raft, toilet etc. with cinder concrete in 1:3:6 mix ( 1 cement, 3 fine sand, 6 cinder) etc. complete
23.6
138314
5860.79
Item No: 11.62
GRANITE DIVIDER: Providing and fixing in position Gents Urinal Divider in 18-20mm thick jet black granite slab, polished on both sides and round moulded edge as per approval including appropriate chase making, fixing, packing and stiffening with bombay nails and plastering, with overall size of 1200mmx600mm. Refer Drawing - Sanitary fixtures for size & shape of partition
12
20049
1670.81
Item No: 11.63
GRANITE COUNTER FOR WASH BASIN: Providing and fixing 600mm wide hand wash / pantry counter with top in approved sample pre-polished granite slab 20mm thick laid on 50mm thk. Cudappa stone slab, supported over brick wall. Providing 230mm high front facia and band 200mm high above the counter in same shade granite. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for sink/ washbasin to be provided and all cut-outs, exposed edges to be full rounded with mirror polish. Cost to also include making necessary cut-outs for taking pipes through counter top.
8
22311
2788.88
Item No: 19.00
19. CAVITY FLOOR AND FALSE CEILING (Refer Section 19.0 of Technical Specifications)
-
-
-
Item No: 19.03
CAVITY FLOORS:- Providing, erecting and installing cavity floor of module 610 x 610 mm panel size including clamps and steps as required with suitable structural steel framing with adjustable vertical supports and securing it to concrete floor with agents like Araldite to form the grid framework of 600 x 600mm true to level panels along the edges. All the steel framework shall be given epoxy based primer and finish coat. The floor panels will be removable 600 x 600 size made out of 35mm thick Nova Teak super particle board of fire, termite and moisture resistant quality. The finishing material for the floor board shall be high pressure laminate of approved make and quality 2mm thick with mat finish and should be antistatic and scratch resistant. The flooring panel will be laminated on the underside by 0.05 mm thick aluminium foil. The edges of the panel will have lipping of hard PVC. The finished panel will be in perfect shape and alignment, free from undulation, warping and properly numbered on the underside for identification.The joints between floor panels shall be air-tight. The complete floor shall be capable of sustaining a point load of 500 Kg. At centre or a uniformly distributed load of 500Kg/M² whichever is higher and the maximum deflection shall be limited to span over 300. All the above work is to be complete in all respects so as to provide level, framings cutouts etc. as per details given in the drawing and/or as per Section 19 of technical specifications for CAVITY FLOOR :upto 800 mm height above floor level.
12
69093
5757.81
Item No: 19.04
CAVITY FLOORS:- Providing, erecting and installing cavity floor of module 610 x 610 mm panel size including clamps and steps as required with suitable structural steel framing with adjustable vertical supports and securing it to concrete floor with agents like Araldite to form the grid framework of 600 x 600mm true to level panels along the edges. All the steel framework shall be given epoxy based primer and finish coat. The floor panels will be removable 600 x 600 size made out of 35mm thick Nova Teak super particle board of fire, termite and moisture resistant quality. The finishing material for the floor board shall be high pressure laminate of approved make and quality 2mm thick with mat finish and should be antistatic and scratch resistant. The flooring panel will be laminated on the underside by 0.05 mm thick aluminium foil. The edges of the panel will have lipping of hard PVC. The finished panel will be in perfect shape and alignment, free from undulation, warping and properly numbered on the underside for identification.The joints between floor panels shall be air-tight. The complete floor shall be capable of sustaining a point load of 500 Kg. At centre or a uniformly distributed load of 500Kg/M² whichever is higher and the maximum deflection shall be limited to span over 300. All the above work is to be complete in all respects so as to provide level, framings cutouts etc. as per details given in the drawing and/or as per Section 19 of technical specifications for CAVITY FLOOR : upto 1500 mm height above floor level.
1054.8
6507831
6169.73
Item No: 19.06
Providing and installing of removable type aluminium false ceiling system for horizontal inclined and vertical comprising of square edge plane panels, 84mm wide x 15 mm deep with 25mm recessed flanges, formed out of 0.5 mm thick aluminium alloy electrically powder coated in standard colour shades as approved by the engineer as approved by the in charge. The panels shall be fixed on formed carriers, 15 mm wide at top 43 mm deep made out of 0.19 mm thick aluminium alloy electrically powder coated in stain black with protruding ears to hold panels in module of 100 mm, with 16 mm gap between the panels, carrier spacing shall be maximum 1.3 M c/c.
1136.8
2057062
1809.52
Item No: 19.07
METAL FALSE CEILING: Providing & Fixing of Hunter Douglas or equivalent Lay-In microperforated metal Tile Ceiling System at any level. The system will consist of metal tiles laid into a 24 mm slotted tee bar system.The tiles will be with Square edged module of 600mm x 600mm made of 0.5 mm thick steel. The square edged tiles are designed to lay in flush with the tee bar. Suspension Consists of pre-punched main tee sections installed in a grid by means of inserting cross tees which are designed to be used with the size of tile selected. Maximum distance of rapid hangers fixing points on the main tee is 1200 mm. Main tees and cross tees will be finished standard baked white enamel finish . Edge cover profiles will be in L-profile 25 x 25 mm made of 1.5 mm thick steel aluminium. The ceiling tiles shall be microperforated . Perforations will have 1.5mm diameter holes resulting in a 22% open area. There shall be a nominal 10 mm plain border on all sides. The coating will consist of a tough and durable polyester powder coating finish in minimal thickness of 60 microns, electro statically applied into electro-galvanised steel, phosphates and chemically treated according to high industrial standards (DIN 1541/ TAIM standards). Installation shall be done as per manufacturers standards complying to prevailing statutory requirements etc. complete. The item also includes the grid suspension sysem supported bt RCC slab/Beams as per manufacturers standards.
2352
4837640
2056.82
Item No: 19.08
MOISTURE RESISTANT FALSE CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. False Ceiling material shall be 12.5 mm thick tapered edge gypsum moisture resistant board.
66.8
115400
1727.55
Item No: 19.09
CAVITY FLOOR - CEMENTATIOUS TILES: Providing & Installation of Access raised floor shall be medium, grade Unifloor FS 800 / or equivalent with point load 3.6 KN / over 25mm sq. and UDL of 12 KN / m2 ; panels manufactured from steel with lightweight cementitious core in the size 600 x 600 x 35 mm.
The panel shall be finished with high abrasion, anti-static HPL with Surface resistively in ohms - 1 x 10 to the fifth power - 1 X 10 to the ninth power ; Volume resistivity - 1 x 10 to the fifth power to 1 x 10 to the eighth power in size 600mmX600mmX1.60mm, cut at 45 degree along every edge of the panel to avoid edge chipping, breakages, pealing of beadings, lateral deflections & scratching between two panels
The bottom of the panel shall be embossed in hemispherical shape to give strength and flexural rigidity. The entire panel shall be finished with electro deposition of cathodic epoxy paint on the exposed surface for lifetime protection.
The panel has to be placed on the pedestal made from all steel zinc plated construction. Pedestal assembly shall provide for easy adjustment of leveling and accurately align panels to ensure lateral restrain. Pedestal head shall be designed to avoid rattle or squeaks.
The steel base plate of the pedestal shall be fixed on to the sub-floor with epoxy pedestal adhesive and/or mechanical fixing. An all-steel rectangular stringer system having prepunched holes at both ends to ensure correct alignment with pedestal heads should be applied for maximum stability.
129.6
586329
4524.15
Item No: 19.09a
All activities and scope same as 19.09 but for Cavity floor :upto 600 mm height above floor level
129.6
596951
4606.11
Item No: 19.09b
All activities and scope same as 19.09 but for Cavity floor :upto 800 mm height above floor level.
12
56265
4688.78
Item No: 19.09c
All activities and scope same as 19.09 but Cavity floor : upto 1500 mm height above floor level.
1054.8
5205828
4935.37
Item No: 19.09d
Providing and fixing metal powder coated grommet holes as per approved colour and sample of 75mm dia. The rate to be inclusive of providing of cut-outs in false floor to take data and power cables to server racks and finishing the same with wire brushes as per approved sample. The cut out size to be considered a 200mm x 300mm (approx).
12
19738
1644.89
Item No: 20.00
20. ANTI TERMITE PRECONSTRUCTION TREATMENT
(Refer Section 20.0 of Technical Specifications)
-
-
-
Item No: 20.01
Providing, applying and spraying of antitermite chemicals over termite mounds, at column pits, walls, trenches and basement excavations, RCC framed structures and RCC walls, on top surface of plinth filling, junction of walls and floors, soil under apron and plinth protection, including providing approved chemicals, tools, plants, instruments, consumables and labour as per Section 20.0 of Technical Specifications. The quantity shall be measured in terms of plinth area of building at Ground Floor.
1999.2
190463
95.27
Item No: 21.00
21. DISMANTLING AND MISCELLANEOUS WORK
(Refer Section 21.0 of Technical Specifications)
-
-
-
Dismantling of existing structures or part at all levels including all tools, tackles, compressed air, labour, crane, consumables and disposal of debris/unserviseble items as directed up lead of 1 KM. Serviceable materials to be stacked and handed over to NALCO.
-
-
-
Item No: 21.01
Brick work of walls and pavings
80
85803
1072.54
Item No: 21.02
Reinforced concrete Columns, Beams, Slabs, Walls etc.
80
147228
1840.35
Item No: 21.03
Stone masonry work
16
20444
1277.8
Item No: 21.04
Asphalt roads upto bottom of soling
24
5850
243.79
Item No: 21.06
Flooring like Tiles in toilet including dado, acid lining
20
882
44.14
Item No: 21.08
Chipping off top of pile upto cut-off level, removing concrete from exposed reinforcements all complete and as directed by Engineer In Charge .
40
110826
2770.67
MISCELLANEOUS WORKS - Unless otherwise specified in the item the work shall be at any location and shall include all tools, tackles, consumables, scaffolding, compressed air etc; including disposal of debris up 1 KM lead.
-
-
-
Item No: 21.09
Cutting rectangular opening in brick wall and finishing the surface smooth.
16
10771
673.23
Item No: 21.10
Cutting circular opening in brick walls and finishing the surface smooth.
16
10771
673.23
Item No: 21.11
Cutting pockets or openings in plain or reinforced concrete, depth of cutting not exceeding 200 mm and removal of all loose particles all complete as per the direction of Engineer In Charge.
16
9392
587.06
Item No: 21.12
Cutting pockets or openings in plain or reinforced concrete, depth of cutting above 200 mm but upto 500 mm and removal of all loose particles all complete as per the direction of Engineer In Charge.
20
23482
1174.12
Item No: 21.13
Making circular openings of dia. upto 700 mm in brick walls of thickness upto 460 mm including finishing the opening with CM 1:6.
20
2620
131
Item No: 21.14
Extra for disposing off all types of debris for every additional lead upto 1000 M beyond initial lead of 1000 M.
120
1513
12.61
Item No: 21.15
Drilling vertical holes in plain or reinforced concrete of dia. upto 63 mm and depth of hole upto 600 mm.
24
16241
676.73
Item No: 21.16
Drilling horizontal or inclined holes in plain or reinforced concrete of dia. upto 63 mm and depth of hole upto 600 mm.
24
21638
901.61
Item No: 21.17
Providing and fixing mastic board around equipment foundations to separate them from paving, flooring or other structure. Thickness of mastic board 25mm max. Top 12 mm to be sealed with 80/100 grade bitumen sand mix.
300
124836
416.12
Item No: 21.18
Providing and fixing in position 12 mm square 24 gauge MS chicken mesh in plaster in all heights including scaffolding.
800
80144
100.18
Item No: 21.19
Providing and fixing in position GI pipe conduits for electrical installations for upto 25 mm dia.
36
7666
212.97
Item No: 21.20
All activities and scope same as 21.19 but for above 25 mm dia. upto 36 mm dia.
120
32029
266.91
Item No: 21.21
All activities and scope same as 21.19 but for above 36 mm dia. upto 100 mm dia.
180
88396
491.09
Item No: 21.22
Supplying and fixing Anchor Fasteners, manufactured by M/s. HILTI / FISCHER or equivalent as approved by the ENGINEER for upto 16 mm dia.
40
15692
392.31
Item No: 21.21
All activities and scope same as 21.22 but for upto 24 mm dia.
40
40996
1024.9
Item No: 21.22
All activities and scope same as 21.22 but for upto 38 mm dia.
36
39821
1106.16
Item No: 21.23
Supplying flat bottom rails, clean the surface cut to required length and fix them over foundation as indicated in drawing.
18
1117084
62060.26
Item No: 21.24
Supplying, fabricating, welding and fixing M.S. pipe sleeves of length upto 100 mm dia including all tools, tackles, etc complete.
18
1122
62.35
Item No: 21.25
All activities and scope same as 21.24 but for pipe sleeve above 150 mm dia. and upto 300
18
1122
62.35
Item No: 21.26
All activities and scope same as 21.24 but for pipe sleeve above 300 mm dia. and upto 800
40
2494
62.35
Item No: 21.27
Supplying and application of NITO BOND of M/s. FOSROC or equivalent for bonding new concrete with old concrete including all tools, tackles, etc complete.
100
130863
1308.63
Item No: 21.28
Providing and fixing cork strips consisting of 50mm x 50 mm strips at 350 mm centres sandwitched in 12mm thick marine plywood onboth sides with suitable adhesive and painting both sides of marine plywood with two coats of coal tar epoxy paint.
100
188728
1887.28
Item No: 21.29
Supplying and providing 'Garware' sun control film over doors/window panes.
8
3945
493.19
Item No: 21.30
Supplying and providing stud bolts with nuts and washers of length upto 1000 mm and Dia. of stud bolt being 20 mm.
8
650
81.26
Item No: 21.31
All activities and scope same as 21.30 but for dia. bolt 25 mm.
120
9751
81.26
Item No: 21.32
Supplying and providing Marine plywood strips of thickness 10 mm and width as indicated in drawing over gratings including screwing the strips onto the gratings.
100
83365
833.65
Item No: 21.33
Providing and laying of 150 mm G.I. flashing strips, gauge 22,
40
3306
82.67
Item No: 21.34
Cutting either manually or by oxy acetelene torch reinforcement bars upto 32 mm dia. at all heights including bending of reinforcement projecting out.
8
235
29.42
Item No: 21.35
Removal of reinforcement steel already fixed in position at all heights, as per instruction of EIC.
12
176
14.72
Item No: 21.36
Removal of formwork already fixed in position at all heights, as per instruction of EIC.
60
3237
53.95
Item No: 21.37
Providing and fixing of welded wire mesh (MS make conforming to IS 4948:2002, Annex A1, SL NO. 1) including cutting, bending and placing at all heights.
40
6753
168.83
Item No: 21.38
Labour charges for removing and refixing (without refabrication) of inserts to new locations as per instruction of EIC.
32
3003
93.87
Item No: 21.40
Providing and fixing 50 mm dia. G.I. pipes either concealed or open in oil drains.
160
62769
392.31
Item No: 21.41
All activities and scope same as 21.40 but for 80mm dia. pipe.
160
92585
578.66
Item No: 21.42
All activities and scope same as 21.40 but for 100 mm dia. pipe.
160
101776
636.1
Item No: 21.43
Providing and applying 3mm thick surface hardener treatment on bunker walls and inclined hopper walls at all heights. The treatment shall be NITROPRIME-25 and NITOFLOR-FC 140 manufactured by M/s. FOSROC Chemicals or equivalent including all tools, tackles, labour and as per manufacturers specifications and as directed by Engineer-in-charge.
20
20876
1043.82
Item No: 21.44
Supplying, providing and fixing stainless steel (SS Gr.316) rungs , flats, etc. as shown in the drawing and as directed by Engineer-in-charge.
80
32673
408.42
Item No: 21.47
Repairing existing RCC elements like slabs, beams, columns, foundations, staircases etc. using prepacked cement mortars RENDEROC (Fosroc Chemicals), ZENTRIFIX (Mc Bauchemie) SIKAREFIT (Sika) or approved equivalent at all heights and levels including all tools and tackles, and as per manufacturers specifications.
20
32085
1604.26
Item No: 21.48
Double Glazed Unit System:
FRAME WORK
Providing and fixing of semi unitised system – all panels fixed using colour anodised Indal/equivalent aluminium mainframe of size 103x55x2mm section for verticals, 72x55x2mm section for horizontals, designed to withstand wind pressure upto 200 kg/sq.m. using necessary aluminium/GI angle cleats with slots for adjusting plumb, fixed to the RCC slabs with M10 expansion fasteners, the main frames verticals to span unsupported length of maximum 3.9m. The glazed panels will be made using 40x42x1.5mm section for subframe using double side cross linked polyethylene spacer tape and structural sealant(GE ultraglaze SSG 40010 or Dow Corning 795/995 or Wacker SG20) in such a way as to transfer the dead weight of the glass on to the mainframe so as to avoid undue stress on the structural sealant. The glazed panels after suitable curing in dust free environment will be fixed on to mainframe from the exterior (this system enables easy replacement of glass in future (if any breakage) from the outside especially in spandrel areas). The grooves will be closed with weather grade silicone.
235.2
718227
3053.69
Item No: 21.48a
Vision Panel::
Supply and fixing of insulated Glass 6-12-6 (6mm thick heat strengthened reflective glass as per options given below) + 12 mm airgap argon filled + 6mm clear heat strengthened glass
GLASS SELECTION:
Light transmission : 19% to 27%
U- value : 5.1 to 5.8 w / sq mtr.k
Internal reflection : 19% to 26%
External reflection : 8% to 14%
Shading coefficient : 0.37 to 0.45 Alternative 1: Asahi 6mm thk cove blue Alternative 2: 6mm thk Emirates make GY 35
Alternative 3: Gold Plus 6mm thk CST 545 ref
196
459567
2344.73
Item No: 21.48b
Extra for providing and fixing of top hung shutters with panelling as above in double glazed unit using Ebco SS friction hinges, two point locking cum handle and necessary hardwares etc.
12
27380
2281.69
Item No: 21.48c
Spandrel Panel:
Same as item no. 21.48a, (6mm thick heat strengthened reflective glass as per alternative selected in 21.48a) with insulation backup (glass wool/ rockwool covered by aluminium sheet)
14
19017
1358.36
Item No: 21.48d
Providing and fixing of spandrel insulation using 6mm thick Bison board/ 6mm calcium silicate board on wall area of structural glazing. Instead of 6mm clear heat strengthened glass.
14
8032
573.75
Item No: 21.48e
Fire Stop/ Smoke seal: Providing and fixing Fire stop / Smoke seal using extruded aluminium channel with cap for continuous double glazed unit framing system with required thickness as per site; in general, the thickness of channel and cap shall be 2 mm (minimum) and to a width as required between transom and finished sill. The aluminium channel and cap shall conform to IS 8147 and finished with anodised coating of approved colour and shade. The channel shall be supported with the help of Aluminium bracket (as designed) fixed to the wall / RCC surface with necessary SS anchor bolt and fastener of Hilti make or approved equivalent. This assembly shall be provided at sill level and at soffit / false ceiling level, etc. complete.
All the Joints between the capping channel and any other finish material at both sill and soffit level shall be sealed with intumescent sealant of 3M or Hilti make. The item includes designing, providing, fixing & finishing of entire assembly complete.
78.4
30647
390.91
Item No: 21.50
GRC JALI
Providing and fixing designer 50mm thick Glass Reinforced Concrete (GRC) jali with 50% covered area as per manufacturers specifications. Item includes fixing jali to wall in cement sand mortar in perfect line & length etc. complete.
23.6
71025
3009.56
Item No: 21.52
Expansion joint
Providing and fixing aluminium sheet of 24 gauge as per required shape as per detailed drawing in RCC beam, RCC columns etc. at expansion joint
47.2
21360
452.56
Item No: 21.53
Self finishing over freshly laid RCC / PCC with trovel finish & thread impression at 300MM c/c in both directions as per direction of engineer incharge
200
840
4.2
Item No: 21.54
Providing and laying High Strength Geostrip (ParaWeb) on earth retaining walls; tensile strength135 kN, elongation 15%
725.2
190009
262.01
TOTAL ESTIMATED VALUE OF WORK AGAINST SL NOs : 1.0 TO 237 ABOVE INCLUDING ALL TAXES & DUTIES, ROYALTIES, CESS, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES ( IF ANY ) OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST.
-
-
-
[ NOTE: Construction Power & Water, Cement, Reinforcement Steel, RMC, Land for Office, Godown, Labour hutment etc. inside and / or out side of Project premises as applicable, all tools, plants, materials, equipment & man power are in the scope of the Bidder within their quoted rate for the above work as per the relevant clauses of Tender document.]
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements