Bhubaneswar Development Authority Tender

Providing and fixing 84R system, make Schepper/Hunter Dglous/Alwood compries of 84 mm wide and 16mm deep roll formed out of aluminium coils. In aluminium, panels are made of 0.5mm thick aluminium alloy 3105/3005 and carriers are made of 0.9mm thick aluminium alloy with cutouts to hold panels. Aluminium panel and carrier shall be polyester powder coated with 60-70 microns. Sun louver system is a vertical or horizontal wall sun shading system. The system use 84R panels that snap into vertically mounted frames. The frames can be mounted on the exterior of the building over window openings, along balconies or over open area on a building elevation. The vertical/horizontal frames are offered in two different designs that hold the panels at different angles of 35 and 45 degrees. The range of angles provide air flow, sun shading, safety from rainfall and desired visibility. Colour warranty 10 yr provided by the Manufacture plant including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing and fitting TATA circular/square/rectangular Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying 2 coats of zinc chromate anti corrossive primer and 2 coats of synthetic enamel paint of approved shade etc complete as per the approved drawing & design including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.