Bhubaneswar Development Authority Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Bhubaneswar Development Authority - BDA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date29 Sep 2023
Closing Date9 Oct 2023
Tender Amount₹ 13,43,34,910
Costs
EMD
₹ 13,43,349Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_BDABU_94974_1Bid Award Id
ViewTender No
1075/EM/BDA/2023-24, Dated-26.09.2023Tender Authority
Bhubaneswar Development Authority ViewPurchaser Address
-Website
http://https://www.bda.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Upto 1.50Mtr Depth
9319.08
-
206.8
From 1.50Mtr Depth to 3.00Mtr Depth
4591.89
-
223.2
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.
32143.17
-
16.27
Construction of embankment with materials deposited at site from roadway/Drain cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.
12523.82
-
35.52
Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
190.09
-
126.5
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
5669.93
-
508.1
Supplying all materials, labour and T&P etc. and providing dewatering Volume of Water, complete as directed by the Engineer-in-charge.(As per Actual)
160.16
-
200.7
Supplying all materials, labour and T&P etc. and uprooting rank vegetation and weeds by digging the area to a depth of 60 em, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, complete as per direction of Engineer-in-charge.
100
-
33.5
Supplying all labour and T&P etc. and providing dressing to embankment slope and surface of the ground including removing vegetation and making up undulations not exceeding 15cm.in depth including disposal of rubbish and plantation of saplings-a)Wadelia plant @ 1 plant/sqft,b) Arjun tree @ 5 Mtr c/c on water side of embankment slope ,c)Bougainvillea glabra @1 No./Sqft.,d) Elephant Ears plant @ 1 Nos./3Sqft and spread across the area,all complete as per direction of Engineer-in-Charge.
17888.3
-
180
Supply and installation of Gabion units of 1/0.5 m height made of mechanically woven, double twisted, hexagonal shaped steel wire mesh as per IS 16014:2018, MORTH clause 2500 of required sizes, Mesh type 10x12, Mesh wire dia 2.7/3.7mm(ID/OD), (Zn+ Polymer coated),having tensile strength 40kN/m & punch strength 19kN, mechanically edged/selvedged ,with partition at 1 m interval and shall have minimum 10 numbers of mesh openings per meter of mesh perpendicular to twist,tying with lacing wire of diameter 2.2/3.2 mm (ID/OD), placing at indicated places in dry condition at easily accessible location as per direction of Engineer including tools, plant, labour etc. complete in all respect, carrying the material from nearest approach with all leads & lifts, manpower & machinery, materials, labor etc. complete as per detailed technical specifications and as directed by Engineer-In-Charge.
450
-
2500
Supply and Filling the Gabion facia unit boxes with dry rubble as per the standard installation guidelines. Rock/rubble for the Gabion filling shall be hard, angular to round, durable and of such quality that they shall not disintegrate on exposure to water or weathering during the life of the structure. The rocks shall range between 150 mm to 250 mm for 10x12 type mesh, including lacing/bracing of gabion boxes and placed in position as per drawaing and to the satisfaction of engineer in Charge (Includes the cost of stones/labour etc. complete). The quality of placing and filling of gabions shall be as per approved construction manual.
450
-
2203.42
Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
169.19
-
5481.9
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(a) R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
20.85
-
6595.6
(b) R.C.C. walls and fins including attached pillasters.
55.33
-
12599.2
(b) R.C.C. Grade Beam
1.23
-
7414.3
(c) R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
Ground Floor
19.49
-
14335.3
(ii)From 1.5Mtr Depth to 4.5Mtr Depth
5.75
-
15424.6
(iii)From 4.5Mtr Depth to 7.5Mtr Depth
4.63
-
15565
(d) R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
(i)Ground Floor
5.87
-
12964.2
(i)From 1.5Mtr Depth to 4.5Mtr Depth
2.36
-
6701.5
(ii)From 4.5Mtr Depth to 7.5Mtr Depth
5.72
-
6841.9
Providing supplying and laying Design Mix Reinforced Cement Concrete of grade M 30(Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in RCC substructure (Abutment/Pier shaft, return wall,retaining wall & flywing ) as per approved drawings and sections 1000, 1500, 1600, 1700 and 2200 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
-
-
-
(Abutment/Pier shaft & return wall
92.11
-
8714.11
Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
4628.9
-
332.5
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1504.2
-
89.8
Finishing with Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer's ecifications including appropriate priming coat, preparation of surface, etc. complete as per Direction of E.I.C.
54.43
-
215.9
Providing and fixing of Hand operated chain Pulley block as per IS:3832 of 1 ton x 3Mtr confirming to IS:3832,Material,Construction,testing as Per IS:3268 including cost of all materials, conveyance, loading, unloading etc. all complete as per the direction of the Engineer -in -charge.
6
-
4153.5
Construction of embankment with earth approved material obtained from borrowpits, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
25066.88
-
200.1
Supplying and filling with filter media including boulder apron laid in steel cage complete as per drawing and Technical specifications.
127.5
-
2203.42
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
-
-
-
Upto 1.50Mtr Depth
1716.62
-
227.7
From 1.50Mtr Depth to 3.00Mtr Depth
32.92
-
244.1
From 3.00Mtr Depth to 4.50Mtr Depth
9.86
-
260.6
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
-
-
-
( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
31.5
-
104.5
Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
5.15
-
5729.9
Providing and laying Brick Masonry work in Foundation & Plinth using Fly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
1.28
-
5149.1
Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
10.4
-
4944.7
Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(i)Ground Floor
164.47
-
165.6
(ii)From 1.5Mtr Depth to 4.5Mtr Depth
58.94
-
172.5
(iii)From 4.5Mtr Depth to 7.5Mtr Depth
32.9
-
182.7
Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(i)Ground Floor
54.18
-
148.3
Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
-
-
-
(i)Ground Floor
66.78
-
212.4
Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULUX or equivalent to make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete.
-
-
-
(i)Ground Floor
285.43
-
152.2
(ii)From 1.5Mtr Depth to 4.5Mtr Depth
58.94
-
157.7
Providing 25 mm thick A.S. flooring with base C.C. (1:2:4) using 20 mm size hard granite crusher broken chips after roughening, scraping, cleaning the base, watering well and laying flooring to required level in panels 2m x 2m (Max.) by using dividing glass strips of 40 x 4 mm size, well compacted and top finishing smooth by trowel with a thick coat of neat cement punning, polished well including cost of all materials, labour, conveyance, sundries, T&P, curing etc. complete as per direction of Engineer-in-Charge.
-
-
-
(i)Ground Floor
13.49
-
340.5
Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
-
-
-
(i)Ground Floor
12
-
1135.2
Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)
-
-
-
(i)Ground Floor
7.56
-
4483.6
Supplying and fixing of factory-made Aluminium System Window of Anodisied 15 microns / Powder coated 50-60 microns approved colour aluminium 42mm Casement series window cum fixed Unit with suitable aluminium extrued profiles. the system should design to accommadate 5/6mm clear Toughen glass as per Design. the rate inclusive of hardwares like antilift,roller, touch lock cum handle,epdm gaskets, felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealent in the outer side,etc complete as per direction of EIC.(MAKE - WINPLUS+ ,ALUPURE , REKLAD)
Fixed / casement Outer frame - 42 X 31X1.5MM (0.512 Kg/Rm)
Shutter Frame -42 X 31 X1.5MM (0.732 Kg/Rm)
-
-
-
(i)Ground Floor
11.25
-
9998.2
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
-
-
-
(i)Ground Floor
13.5
-
401.3
Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(i)Ground Floor
18
-
349.8
Providing and applying of Two component polymer modified flexible cementitious waterproofing coating.Ppolymer dispersion based highly flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance. It bridges shrinkage cracks. Larger cracks, static (Non moving) or dynamic (moving), can be sealed with SealT ape.
Elongation 60%
Crack Bridging ability : Up to 1 mm
Adhesive strength: 1.0 N/mm² @ 28d
Tensile elongation: 30% @ 20°C
ShoreA Hardness 85 (between 3 - 7 days) (Make:MYK Arment/Fosroc/Asian Paint/Tremco CPG (India) Private Limited/Sika/Sunanda/MAPEI)
-
-
-
(i)Ground Floor
18
-
476.2
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment.)
-
-
-
(i)Ground Floor
128.94
-
8908.5
(ii)From 1.5Mtr Depth to 4.5Mtr Depth
12.2
-
8985.5
(iii)From 4.5Mtr Depth to 7.5Mtr Depth
12.03
-
9103.4
Providing and laying in position of plain cement concrete 1:2:4(1 Cement :2 Sand :4 Coarse Agreegate) in floors using 12mm size crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
2.13
-
6845.1
Providing and laying of 16mm thick 600 mm x 600 mm Industrial Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)
53.28
-
2009.7
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
29.16
-
236.5
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Make:TATA,JINDAL,APPOLO)
469.92
-
107.6
Earth work in excavation of foundation of structures in all kinds of soil as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per clause 304 of MORTH specification for Road and Bridge works (5th revision) and as directed by the Engineer in charge
6348.38
-
88.27
Excavation for foundation for structures including pipe culverts in all types of soil complete as per drawings and Technical Specifications Clauses 304, 309 & 2903.
1800.06
-
206.77
Cement concrete PCC M15 in levelling course including centering and shuttering all complete as per drawing and Technical Specifications Sections 1500 & 1700.
a)below Head wall & pipes
304.68
-
5178.88
Cement concrete grade M15 in pipe bedding including centering and shuttering all complete as per drawing and Technical Specifications Sections 1500 & 1700.
a)below Head wall & pipes
681.54
-
5178.88
Plain cement concrete grade M 20 including centering and shuttering complete as per drawing and Technical Specification Sections1500 &1700 and Clause 2908.
a) In Head wall
530.1
-
6822.41
Providing , laying and jointing reinforced cement concrete NP-4 (IS:458) 900 mm dia pipe with cement mortar in proportion 1:2 (1 cement : 2 coarse sand) for culverts and ducts complete as per drawings and Technical Specifications Section 2900.
436.8
-
4260.62
Filter material underneath stone pitching on slopes complete as per drawing and Technical Specifications Section 2500.
21.18
-
973.12
Pitching on slopes as per drawings and Technical Specifications Section 2500.
i) Stone 300mm thick
42.3
-
2203.42
Supplying, Providing & laying Plain cement concrete M-15 grade (cast-in-situ) in nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as levelling course as per drawing and technical specification section 1000, 1500 & 2100 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge
16.22
-
5178.88
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size & down grade black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
30.49
-
5178.88
Providing supplying and laying Design Mix Reinforced Cement Concrete with grade M 30 in Open Foundation complete as per Drawing and Technical Specifications as per approved drawings and sections 1000, 1500, 1600, 1700 and 2100 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer in charge
62.93
-
6572.55
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications section 1600 of MORTH specification for Road & Bridge works (5th revision) including cost of binding wires & compensation of all inclusive costs, all operations, contingencies, incidentals, involved in the finished defect free item of work complete to specification as directed by Engineer in charge
7.55
-
88822.47
Reinforced cement concrete in M 30 (Cast - in - Situ) for sub-structure complete as per drawing and Technical Specifications in Abutment/Pier Cap , Dirt wall, as per approved drawings and sections 1000, 1500, 1600, 1700 and 2200 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
-
-
-
Abutment/Pier Cap , Dirt wall
8.41
-
7917.25
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Abutment/Pier shaft, cap, return wall, dirt wall complete as per Drawing and Technical Specifications section 1600 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge.
12
-
88822.47
Superstructure
-
-
-
Providing supplying and laying Reinforced Cement Concrete of grade M30 (Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in RCC Deck slab as per approved drawings and sections 1000, 1500, 1600, 1700 and 2300 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
70.85
-
10208.21
Supplying, decoiling, straightening, cutting, bending, placing in position and tying the grills of HYSD steel reinforcement Fe 500 conforming to IS-1786, 2008 in position binding with galvanized binding works of 18 gauge complete for all RCC works in as per working drawing and technical specification section 1000,1500,1600, 2300 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge.
7.09
-
88822.47
Supplying, Providing & laying Plain cement concrete M-15 grade (cast-in-situ) as per mix prepared under relevant IS/IRC codes concrete using graded crushed stone aggregate, cement and coarse sand of approved quality and quantity below approach slab as levelling course as per drawing and technical specification section 1000, 1500,1700 & 2700 of MORTH specification for Road & Bridge works (5th revision) and as directed by Engineer in charge
11.61
-
5178.88
Supplying, Providing & laying Reinforced Cement Concrete M-30 grade (cast-in-situ) design mix using graded crushed stone aggregates, cement and coarse sand of approved quality and quantity in approach slab as per drawing and technical specification sections 1000, 1500, 1600,1700, 2700 (Cl.2704), of MORTH specification for Road & Bridge works (5th revision) but including reinforcement complete as directed by Engineer in charge.
21
-
10685.82
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm (in traffic direction), covered with a closure plate of 200mm x 6mm of weldable structural steel conforming to IS: 2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5 mm nominal size and a heat resistant foam caulking/backer rod, all as per approved drawings and specifications section Clause 2608 of MORTH specification for Road & Bridge works, (5th revision).
20
-
956.39
Providing wearing coat M 30
6.68
-
12966.42
Construction of RCC railing of M30 Grade aggregate size not exceeding 20 mm , true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
63.64
-
2267.61
Construction of RCC railing of M30 Grade aggregate size not exceeding 12 mm , true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
34.84
-
3148
Supplying, fabricating welded water tight drainage spout as per technical specification clause 2705 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slab including full compensation to all operations, all inclusive costs, contigencies, incidental involved for the finished defect free item of work complete to specificaton & as directed by engineer in charge.
6
-
837.75
Providing& fixing PVC 100mm pipe dia of material duly approved in drainage spouts with all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge.
5.8
-
150
Providing& fixing PVC 150mm pipe dia of material duly approved as utility duct with all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge.
63.64
-
150
Supplying, Providing, fixing weep holes in plain / reinforced concrete abutments / return walls as per drawings and technical specifications section 2200, 2700 ( Clause 2706) of MORTH specification for Road & Bridge works (5th revision) with 100mm dia PVC pipe extending through the full width of the structure with slope of one vertical x 20 horizontal towards drainage face complete including full compensation to all inclusive costs all operations, contingencies incidetals involved for the finished defect free item of work complete to specification and instruction of Engineer in charge.
43.6
-
106.08
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2200, 2504.2.2. of MoRTH specifications for Road & Bridge works (5th revision) & 710.1.4.of IRC:78 to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification and instruction of Engineer in charge.
55.72
-
2860.59
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification section 2200, IRC-78 and instruction of Engineer in charge.
144.82
-
887.78
Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm to the bridge superstructure as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge
281.98
-
35.53
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge
2487.52
-
75.88
Supplying, Providing & laying Plain cement concrete M-15 grade (cast-in-situ) in nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as levelling course as per drawing and technical specification section 1000, 1500 & 2100 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge
12.29
-
5103.25
Providing supplying and laying Design Mix Reinforced Cement Concrete with grade M30 in Open Foundation complete as per Drawing and Technical Specifications as per approved drawings and sections 1000, 1500, 1600, 1700 and 2100 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer in charge
74.4
-
6523.99
Providing supplying and laying Design Mix Reinforced Cement Concrete of grade M30(Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in RCC substructure (Abutment/Pier shaft, return wall,retaining wall & flywing ) as per approved drawings and sections 1000, 1500, 1600, 1700 and 2200 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
102.95
-
8621.74
Reinforced cement concrete in M30 (Cast - in - Situ) for sub-structure complete as per drawing and Technical Specifications in Abutment/Pier Cap , Dirt wall,Pedestal as per approved drawings and sections 1000, 1500, 1600, 1700 and 2200 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
2.97
-
7841.18
Providing Fabrication, supply, assembling, riveting, welding wherever required with contractor's rivet material, weld materials, bolts, service bolts erection and launching of girders with contractor's own mild steel confirming to IS:2062-1992 specifications and rivets, nuts and bolts, welding etc including contractor's own material fabrication machinery, templates, fixtures, equipments, tools and plants, transportation, skilled/unskilled labours, all lead and lift etc complete as per Direction by the Engineer
26
-
185476.27
Providing supplying and laying Reinforced Cement Concrete of grade M30 (Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in RCC Deck slab as per approved drawings and sections 1000, 1500, 1600, 1700 and 2300 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer -in - charge.
12.13
-
10085.29
Supplying, decoiling, straightening, cutting, bending, placing in position and tying the grills of HYSD steel reinforcement Fe 500 conforming to IS-1786, 2008 in position binding with galvanized binding works of 18 gauge complete for all RCC works in as per working drawing and technical specification section 1000,1500,1600, 2300 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge.
-
-
-
Foundation
8.93
-
75984.09
substructure
14.14
-
75984.09
Superstructure
1.46
-
75984.09
Providing and laying of compression seal joint consisting of steel armoured nosing at two edges of the joint gap suitably anchored to the deck concrete and a preformed chloroprene elastomer or closed cell foam joint sealer compressed and fixed into the joint gap with special adhesive binder to cater for a horizontal movement upto 40 mm and vertical movement of 3 mm.
10
-
10960.62
Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006,2000,2200 of MoRTH Specifications complete as per drawing and approved Technical Specifications.
4
-
58000
Supplying, Providing & laying reinforced cement concrete M-30 grade (cast-in-situ) as per mix design prepared under relevant IS/IRC concrete codes using graded crushed stone aggregates cement and coarse sand of approved quality and quantities in Wearing coat using weigh batching, mechanically mixing, vibrating, centering & shuttering, decentering using necessary plant equipments & machinery including full compensation to all inclusive costs all operations contingencies incidentals involved for the finished defect free item of work complete to specification including cost of reinforcement complete as per drawing and technical specification and section 1000, 1600, 2700, 900, 100 of MORTH specification for Road & Bridge works, (5th revision) as directed by Engineer in charge.
5.93
-
11941.33
Providing, fitting and fixing Mild steel railing complete as per drawing and technical specification
50
-
3116.2
Supplying, fabricating welded water tight drainage spout as per technical specification clause 2705 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slab including full compensation to all operations, all inclusive costs, contigencies, incidental involved for the finished defect free item of work complete to specificaton & as directed by engineer in charge.
4
-
1411.8
Providing& fixing PVC 100mm pipe dia of material duly approved in drainage spouts with all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge.
1.1
-
150
Providing& fixing PVC 150mm pipe dia of material duly approved as utility duct with all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge.
50
-
150
Supplying, Providing, fixing weep holes in plain / reinforced concrete abutments / return walls as per drawings and technical specifications section 2200, 2700 ( Clause 2706) of MORTH specification for Road & Bridge works (5th revision) with 100mm dia PVC pipe extending through the full width of the structure with slope of one vertical x 20 horizontal towards drainage face complete including full compensation to all inclusive costs all operations, contingencies incidetals involved for the finished defect free item of work complete to specification and instruction of Engineer in charge.
45
-
517.05
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2200, 2504.2.2. of MoRTH specifications for Road & Bridge works (5th revision) & 710.1.4.of IRC:78 to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification and instruction of Engineer in charge.
47.8
-
2669.14
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification section 2200, IRC-78 and instruction of Engineer in charge.
109.71
-
883.6
Supplying, Providing and laying gravel backing /Filter material underneath stone / Cement Concrete Block pitching on slopes complete as per drawing and Technical Specifications Section 2504 of MORTH specification for Road & Bridge works (5th revision) and and as per direction of Engineer in charge.
84.93
-
1073.44
Supplying and provding stone Pitching on slopes using sound ,hard, durable and fairly regular in shape and weighing each stone not less than 40 kg, as per drawings and Clause 2504 of Technical specification for Road & Bridge works MORTH (5th revision) and as direction of Engineer in charge.
84.93
-
2043.57
PCC M-20 Toe Wall
20.12
-
6157.64
Supplying and provding stone Pitching on slopes using sound ,hard, durable and fairly regular in shape and weighing each stone not less than 40 kg, as per drawings and Clause 2504 of Technical specification for Road & Bridge works MORTH (5th revision) and as direction of Engineer in charge.
77.72
-
2203.42
Supplying, decoiling, straightening, cutting, bending, placing in position and tying the grills of HYSD steel reinforcement Fe 500 conforming to IS-1786, 2008 in position binding with galvanized binding works of 18 gauge complete for all RCC works in as per working drawing and technical specification section 1000,1500,1600, 2300 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge.
92.95
-
8882.25
Providing supplying and laying Design Mix Reinforced Cement Concrete with grade M 30 in Open Foundation complete as per Drawing and Technical Specifications as per approved drawings and sections 1000, 1500, 1600, 1700 and 2100 of MORTH specifications for road and bridge works(5th revision) excluding the cost of reinforcement complete as directed by Engineer in charge
103.28
-
6244.7
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
1933.33
-
35.57
Construction of granular sub-base by providing close graded VI Material, spreading in uniform layers with motor grader on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
2391.28
-
2406.03
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
840.35
-
2272.14
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required pattern etc, complete in all respect confirming to IRC SP-63:2018.
3125
-
608.4
Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required pattern etc, complete in all respect confirming to IRC SP-63:2018.
5085
-
485.28
Providing and laying cobble stone flooring without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
1300
-
752.5
Providing and laying 300x400x60 mm thick Grass paver over 50mm thick compacted bed of sand, compacting and proper embedding/laying of grass paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
1391
-
1432.3
Supplying and fixing of Pre-Cast kerb stone of size 600mm x 300mm x 150mm of M-30 Grade of approved make,design,colour and size made by block making machine with proper compaction fixed in required patern etc.complete in all respect conforming to IS 5758:1984.
10827
-
249.55
Construction of embankment with approved materials obtained from borrow pits by mechanical means graded and compacted to meet requirement as per approved drawing and technical specifications complete in all respect as per Section 900 and clause 305 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in- Charge.
3051
-
200.1
P.C.C. work M-15 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying.
93.24
-
5455.4
Laterite stone masonry in cement mortar (1 : 6)
in foundationand plinth
1242.82
-
4279.1
Providing and laying Corian Grass /Jayasia Japanica/Selection No.-1/Neelgiri Grass Turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmous) and then rolling the surface with light roller make that surface smoothen and light watering with sprinkler and maintenance for 30days or more till the grasses establish properly, as per direction of officer-in-charge etc. All compete.
49731.05
-
206.1
Supplying and stacking of quality garden soil preferably red alluvial / sandy at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
12432.76
-
397.4
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
4973.11
-
294
Screened through sieve of I.S. designation 20 mm
1657.7
-
226.7
Screened through sieve of I.S. designation 16 mm
1657.7
-
246
Screened through sieve of I.S. designation 4.75 mm
1657.7
-
261.5
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
4973.11
-
28.3
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
4973.11
-
19.3
Providing and stacking of Amaltas(Cassia Fistula), having ht.75 to 90 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge
88
-
41
Providing and stacking of Copper Pod(Peltophrum Pterocarpum), having ht.75 to 90 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge.
16
-
30.8
Providing and stacking of Patuli(LAEGERSTROEMIA), having ht.150 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge.
22
-
123
Providing and stacking of PALASH(BUTEA MONOSPERMA), having ht.75 to 90 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge
6
-
51.3
Providing and stacking of Silk Cotton Tree(Bombax Ceiba), having ht.75 to 90 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge.
18
-
41
Providing and stacking of Kanchan Tree(Bauhinia Blackeana), having ht.150 cm with fresh and
healthy leaves in Plastic Bag & as per direction of the officer-incharge.
12
-
123
Providing and stacking of Champa Red, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
14
-
92.3
Providing and stacking of Champa White, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
31
-
92.3
Providing and stacking of Kanak Champa, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
8
-
41
Providing and stacking of Rain Tree, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
1
-
71.8
Providing and stacking of Indian Badam Tree, having ht.150 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
20
-
123
Providing and stacking of Karanj, having ht.150 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
9
-
123
Providing and stacking of Bakul, having ht.150 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
15
-
123
Providing and stacking of Arjuna Tree, having ht.150 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
7
-
123
Providing and stacking of Teak Tree, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
12
-
30.8
Providing and stacking of Bottle Brush Tree, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
13
-
41
Providing and stacking of Kadamb Tree, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
16
-
30.8
Providing and stacking of Gulmohar, having ht.75 to 90 cm with fresh and healthy leaves in Plastic Bag & as per direction of the officer-incharge.
20
-
30.8
Supply & planting of the Creepers as per botanical name / common name & specification mentioned here under :
-
-
-
Clerodendrum thomsoniae of height 30 cm.to 45 cm
250
-
45
Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm.
500
-
40
Bignonia venusta (Golden shower) of height 30 cm to 45 cm.
500
-
40
Clerodendrum splendens of height 30 cm to 45 cm.
500
-
30
Ipomoea purpurea (Morning glory) of height30 cm to 45 cm.
500
-
35
Quisqualis indicia of height 30 cm to 45 cm.
500
-
25
RANGOON CREEPER of height 30 cm.to 45 cm
250
-
45
Money Plant of height 30 cm to 45 cm.
250
-
25
Monstera Plant of height 30 cm to 45 cm.
250
-
25
Alocasia plant of height 30 cm to 45 cm.
175
-
45
Ixora plant of height 30 cm to 45 cm.
175
-
45
Leucophyllum plant of height 30 cm to 45 cm.
175
-
45
Pandanas plant of height 30 cm to 45 cm.
175
-
70
Syngonium plant of height 30 cm to 45 cm.
175
-
70
Taberna montana plant of height 30 cm to 45 cm.
175
-
70
Bird of paradise plant of height 30 cm to 45 cm.
175
-
70
Canna plant of height 30 cm to 45 cm.
175
-
70
Heliconia plant of height 30 cm to 45 cm.
175
-
70
Dracaena plant of height 30 cm to 45 cm.
175
-
70
Japonicus lily plant of height 30 cm to 45 cm.
175
-
70
Spathiphyllum plant of height 30 cm to 45 cm.
175
-
70
Lemon grass plant of height 30 cm.
175
-
45
Alpinia zerumbet plant of height 30 cm to 45 cm.
175
-
45
Lantana plant of height 30 cm to 45 cm.
175
-
45
Zebrina plant of height 30 cm to 45 cm.
175
-
45
Tecoma capensis plant of height 30 cm to 45 cm.
175
-
45
Russelia equisetiformis plant of height 30 cm to 45 cm.
175
-
45
Crinum asiaticum plant of height 30 cm to 45 cm.
175
-
45
Fountain grass plant of height 30 cm to 45 cm.
175
-
45
Allamanda cathartica plant of height 30 cm to 45 cm.
175
-
55
Hamelia patens plant of height 30 cm to 45 cm.
175
-
55
Plumbago capensis plant of height 30 cm to 45 cm.
175
-
55
Nerium oleander plant of height 30 cm to 45 cm.
175
-
55
Dianella tasmanica plant of height 30 cm to 45 cm.
175
-
55
Syzygium plant of height 30 cm to 45 cm.
175
-
55
Song of india plant of height 30 cm to 45 cm.
175
-
55
Wedelia plant of height 30 cm to 45 cm.
175
-
55
Iresine plant of height 30 cm to 45 cm.
175
-
55
Acalypha plant of height 30 cm to 45 cm.
175
-
55
Gardenia plant of height 30 cm to 45 cm.
175
-
55
Rhapis palm plant of height 30 cm to 45 cm.
175
-
55
Areca palm plant of height 30 cm to 45 cm.
175
-
45
Golden bamboo plant of height 30 cm to 45 cm.
175
-
45
Topiary
-
-
-
Supplying, fitting and fixing of M.S. grills in windows including screws as may be required etc with cost, conveyance, labour, T&P etc. required for the complete in all respect.
85
-
66.8
Providing and fixing of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
140
-
656.9
Fertilizer Pesticide & Medicines
-
-
-
Procurement of Neemdust(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
5
-
1500
Procurement of Mustard Dust(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineerin- charge etc all complete.
3
-
2000
Procurement of Verrmi(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
2
-
750
Procurement of DAP(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc
2
-
1500
Procurement of Urea(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc
5
-
550
Procurement of Pottas(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc
2
-
650
Procurement of Super(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc
2
-
650
Procurement of Steramil(50kg) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
4
-
1200
Procurement of A-One(250ML) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
5
-
150
Procurement of Roger(250ML) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
5
-
250
Procurement of Mallethiun (250ML) good condition including transportation. Loading & unloading at site as per the direction of Engineerin- charge etc all complete.
5
-
240
Procurement of Blitox(250ML) good condition including transportation. Loading & unloading at site as per the direction of Engineer-in-charge etc all complete.
4
-
300
Procurement of Mankojeb M 45 (250ML) good condition including transportation. Loading & unloading at site as per the direction of Engineerin- charge etc all complete.
5
-
220
Procurement of Chlorpyrifos(1 Ltr) good condition including transportation. Loading & unloading at site as per the direction of Engineerin- charge etc all complete.
10
-
450
Yellow Teak Sand Stone Round Bench Size – Outer Dia 8 feet. X seating ht. 1.5 feet. X outer ht. 3 feet.
2
-
101631.3
Décor Metal Garden Furniture Set
2
-
11034.3
Modern White Marble Garden Bench
2
-
29037.5
Modern Granite Garden Bench
2
-
29037.5
Granite Garden Bench Round Shape
2
-
40652.5
Cast Iron Bench With FRP Seaters:Cast Iron Bench with FRP Seaters suitable for easy cleaning. The cast iron shall be Black Powder Coated.
Make- Bonacea/Eqv
10
-
11034.3
ABB Crunch Or Sit-Up Bench (Gross Weight - 41 Kg)
1
-
57500
Knee/ Hip Raise On Parallel Bars (Gross Weight - 86 Kg)
1
-
79300
Bench With Fixed Dumbbell (Gross Weight - 92 Kg)
1
-
113000
Bench With Fixed Weight Lift (Gross Weight - 80 Kg)
1
-
99500
Shoulder Exerciser (Gross Weight - 93 Kg 300 Gm)
1
-
112000
Twister (Gross Weight - 92 Kg)
1
-
86200
Glider Or Set Back/ Leg Press (Gross Weight - 71 Kg)
1
-
93200
Air Swing (Gross Weight - 82 Kg)
1
-
97800
Poles With Fixed Weight (Gross Weight - 90 Kg)
1
-
107300
Walker (Gross Weight - 85 Kg 700 Gm)
1
-
105600
PORTABLE CABIN (KIOSK)
With complete insulations, electrical, & Cement Board claddings (15’x12’x8’6”)
Partition with open window (01 No), Kitchen Granite Slab with Storage (01 No), Counter (8’x2’) (1 No), MCB (1 No), Main Door (1 No), BULKIT Light (1 No), Cabin Overhead tank frame (1 No), Hanging Window
INTERIORS
Exhaust Fan (1 No),Light (4 Nos),16 amp Switch (2 Nos),12 amp Switch (4 Nos),Kitchen Sink (1 No)
-
-
-
SPECIFICATION
I. Bottom Frame
150 x75 mm formed MS G channel of 3mm thick.(For option-2) 100 x50 mm formed MS G channel of 3mm thick.
II. Stiffener Bottom
100X50 C Channel, 80x40mm & 50x50 mm square pipes.14guage (Option – 2) 100X50 Pipes, 50X50 Pipes & 40X40 Pipes-18Guage
III. Top Frame
Frame made of 80x40mm square pipes. 16guage (Option – 2) 50X50 Pipes. 18Guage
IV. Stiffener Top
50x50 mm, 40x40 mm & 50 x 25 mm square pipes. 16Guage (Option – 2) 40X40 Pipes & 25X25 Pipes 18Guage
V. Side Wall Stiffeners
Corner post shall be of 60x60mm L Angel, 50x50 mm Square pipes & wall thickness of 60 mm. 14guage (Option – 2) 50X50 Pipes on all sides 18guage
VI. Panelling Outside
Specially corrugated 1.2mm thick sheet welded on MS frame 16guage. (Option – 2) 1.2mm Sheets 18guage
10
-
502755.3
Providing and Placing of 4-5 ft Height Black or White stone sculpture of Modern Art Type including cost of all labours, materials, T&P etc. complete as per direction of E.I.C
10
-
55000
Providing and Placing of 4-5 ft Height Black or White stone sculpture of Animal Type including cost of all labours, materials, T&P etc. complete as per direction of E.I.C
10
-
55000
Wheel Type Dustbin 120 litres Capacity
10
-
2555.3
Pencil Shape Dustbin Of Size - 12"X12"X40"
10
-
4065.25
Giraffe Dustbin - 2.7 ft Height
6
-
5575.2
Cylinder Dustbin
15
-
3019.9
Big Frog Dustbin - Ht.-4ft X 2.5ft Diameter
15
-
5575.2
Donald Duck Dustbin - Ht.-3.75ft
10
-
3716.8
Supplying and Installation of WPC GAZEBO 20feet X 20 feet:WPC GAZEBO made up of WPC Pillars, WPC Rafters, WPC Beam, WPC Railing & WPC Deck Flooring as per approved design. Make- Shubhwoods/Eqv. Company-Milota Composites LLP Roof Made up of 12mm Shera Board with Artificial Thatch Roofing PVC materials as per approved design.including the cost of all materials, cost of all labour, conveyance, loading, unloading, sundries, T&P, etc. complete as per the direction of the Engineer-in-Charge.
4
-
1577317
Pre Fabricated Steel Structure Toilet block "D" shap Area 421 sqft.Specifications as mentioned below.Floor plan as shown on the right.RCC foundations,Water Storage Tank,Pressure Pump,Sewage Tank,Toilet Fixtures,Transportation Charges etc complete as per direction of E.I.C
-
-
-
FOUNDATIONS:RCC foundations,STRUCTURE:The entire structure is made of Steel & Wood technology from Australia using the latest CNC controlled machines. The entire structure is designed in special software, which results in high accuracy in production,STRUCTURE WRAPPING:The entire steel structure is then wrapped with CFB boards. These boards are lightweight but very strong, water & termite resistant,INSULATION:All Walls and Roof are well insulated with Rock Wool of thickness 100mm, which gives the structure protection from Heat, Cold and sound,INTERNAL PANELLING:All the internal walls finish with aisan paint as per clients choice of color and all cilings will finish with Natural pinewood cladding. Internal bathroom walls fitted with 80 x 80 cms ceramic tiles of make Kajaria or similar,EXTERNAL PANELLING:Exterior walls will be Provide to finished with metal cladding in grey color. Roofing will be provid to finish with the Roof shingals(tecnonicol) in choice of color,
1
-
2581790
Supplying installation testing and commissioning of 100 KVA 11/0. 415 KV 3 Phase, 50Hz, Dyn11, oilcooled ONAN type,pole mounted , Outdoor type, copper wound transformer Confirming to IS:1180(Part-I), 2014 and Energy Efficiency Level-3 with OFF load tap changing arrangement on HV side from + 5% to -10% in steps 2.5% along having cable end box on HT and LT side, complete with, oil and winding temperature indicator and alarm contact, PRV, MOG with all accessories i/c first filling of filtered dehydrated oil asPer direction of EIC.(Make:OTPL/ ALFA/CG/Kirlosker)
1
-
411170.02
External Main LT panel(Ex. Panel-1)
-
-
-
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof( IP65)M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.Switchgear Make-Legrand(DPX3)/Schneider(NSX)/L&T (D shine)/ABB
-
-
-
Busbar -250AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
One (1)-Incomer feeders each consisting of
-
-
-
One (1) - 200Amp, 25 KA, 4P MCCB TM release with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 250/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.Ics=100%Icu
-
-
-
Two (2) - Outgoing Feeders 1no Outdoor LT panel & Plumbing panel each comprising of
-
-
-
One (1) - 125 Amp, 25 KA, 4P MCCB TM with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 160/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.Ics=100%Icu
1
-
69744.37
External Sub LT Panels-02(DG Backup) From Ex.panel-01
-
-
-
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof (IP 65) outdoor M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet,double door with shed , insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.Switchgear Make-Legrand(DPX3)/Schneider(NSX)/L&T (D shine)/ABB
-
-
-
External Sub PANEL
-
-
-
Busbar -200A AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
Two (2)-Incomer feeders each consisting of
-
-
-
One (1) - 125 Amp, 25 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 160/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.earth fault module
-
-
-
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
One(1) - 125A 4P changeover switch
-
-
-
Three(3) - Outgoing Feeders For Essential External Panel each comprising of
-
-
-
63A 4P MCB
-
-
-
Five(5Nos) Feeder for External Lighting
-
-
-
One (1) 40 Amp TPN 25 KA MCCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required.
-
-
-
PANEL AS ABOVE
1
-
50480.02
External Sub LT Panels-01(Non DG Backup) From Ex.panel-01 for Borewell & other connection
-
-
-
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof (IP 65) outdoor M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet,double door with shed , insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.Switchgear Make-Legrand(DPX3)/Schneider(NSX)/L&T (D shine)
-
-
-
External Sub PANEL
-
-
-
Busbar -200A AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
One (1)-Incomer feeders each consisting of
-
-
-
One (1) - 125 Amp, 25 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 160/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.earth fault module
-
-
-
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
Four(4) - Outgoing Feeders For Borewell each comprising of
-
-
-
One (1) 63 Amp. 25KA 4P MCB
-
-
-
Two(2) - Outgoing spare Feeders each comprising of
-
-
-
One (1) 40 Amp. 25KA 4P MCB
-
-
-
PANEL AS ABOVE
1
-
31893.98
Feeder piller for external Lighting
-
-
-
Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 copper busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
Make-Legrand(DPX3)/Schneider(NSX)/L&T (D shine)
-
-
-
1 No - 40 Amp 4P MCB Incomer
-
-
-
6 Nos - 16 Amp SP MCB Outgoing
-
-
-
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
5
-
14556.29
Cable
-
-
-
Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. Make-KEI/Finolex/Polycab/Gloster
-
-
-
3.5C X 150 sqmm
100
-
1024.79
3.5C X 70 sqmm
250
-
568.67
3.5C X 35 sqmm
200
-
313.95
Supplying & Testing of 1.1 KV grade Copper XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
3C X 4 sqmm
1200
-
315.14
3C X 1.5 sqmm
5500
-
127.36
Cable laying
-
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required
-
-
-
Above 35 sqmm & upto 95 Sqmm
170
-
183.9
Above 95 Sqmm and upto 185 sqmm
194
-
198.31
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),and refilling the trench etc as required including termination in light point.
-
-
-
upto 35 Sqmm
6900
-
85.42
TERMINATION OF CABLES :-
-
-
-
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) Make-Dowell
-
-
-
3.5C X 150 sqmm
4
-
590.68
3.5C X 70 sqmm
8
-
396.61
3.5C X 35 sqmm
12
-
312.71
Earthing
-
-
-
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.Make-OBO/Stromking/ Indilac
4
-
11727.12
Providing and fixing 25 mm X 5mm copper strip at below 0.5 mtr from ground as electrode including connection like nut,bolt,spring etc as required .
30
-
724.58
Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
18
-
5809.32
Providing and fixing 25 mm X 5mmGI strip at below 0.5 mtr from ground as electrode including connection like nut,bolt,spring etc as required .
50
-
169.92
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
98
-
31.36
Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required.
-
-
-
110 mm dia
50
-
250
Supply,Installation,testing & commissioning of 40KVA SILENT D.G.SET 415 VOLT, 3PH, 50 HZ, 0.8PF AT 1500RPM conforming to ISO 3046 / BS 5514 ,ENGINE COUPLED WITH ALTERNATOR, FUEL TANK, BATTERY 12 VOLT, RESIDENTIAL SILENCER AND MANUAL CONTROL PANEL
-
-
-
ALTERNATOR SPECIFICATION:Rating 40KVA
-
-
-
KW=32kw
-
-
-
Engine:
-
-
-
Direct injection, water cooled , 4 cylinder, inline, 4 stroke,
-
-
-
rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:
-
-
-
- Mechanical FIP
-
-
-
- Electronic governor
-
-
-
- Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust
-
-
-
flexible connection
-
-
-
- Radiator Cooling, with turbocharged after cooling
-
-
-
- Plate type lube oil cooler
-
-
-
- Filter –fuel, lube oil
-
-
-
- Dry type replaceable paper element air cleaner
-
-
-
- Flywheel housing and flywheel to suit single bearing alternator
-
-
-
- Starting motor – Electric, battery charging alternator
-
-
-
- First fill of lube oil and coolant
-
-
-
Alternator
-
-
-
Brushless alternator
-
-
-
- Self-excited, self-regulated
-
-
-
- Class ‘H’ insulation limited to temperature rise of class H
-
-
-
- Salient pole revolving field
-
-
-
- Single bearing
-
-
-
- Automatic voltage regulator
-
-
-
Acoustic enclosure
-
-
-
Engine - alternator assembly mounted on AV
-
-
-
mounts with silencer and S.S exhaust bellow suitably optimized to
-
-
-
meet stringent noise emission standards as laid down by MOEF/CPCB
-
-
-
- Base rail with draw-out type fuel tank provided with drain plug, air
-
-
-
Vent, inlet and outlet connections, level indicator, manhole etc
-
-
-
- Sub-base fuel tank with 11 hours capacity at 75% load
-
-
-
- 24 V dry batteries with connecting leads and terminals
-
-
-
- 90% gloss RAL9003 white pure polyester powder coated, base in
-
-
-
black colour
-
-
-
- Water and lube oil drain outlets located on the outer surface- Leading
-
-
-
to ease of maintenance and cleanliness.
-
-
-
Control panel: RAL 9003 White Powder coated control panel
-
-
-
manufactured with CRCA sheet provided with
-
-
-
- MCCB of suitable rating with short circuit protection
-
-
-
- Controller with voltage, current, KW, PF, Frequency, KWh display
-
-
-
- Indicating lamps for “Load On” and “Set Running”
-
-
-
- Current transformers of suitable ratings
-
-
-
- Aluminum busbars of suitable capacity with incoming and
-
-
-
outgoing terminations
-
-
-
- Control fuses duly wired and ferruled
1
-
646374.75
MAKE : CG/Jakson/Mahindra/Kirloskar
-
-
-
Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required.(Make: Legrand(Myrius)/ Anchor(Vision)/ Crabtree(Athena)
-
-
-
Single light point controlled by one 6A switch or first light point of group control.
5
-
843
Subsequent point of group control
10
-
456
Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required.(Make: Legrand(Myrius)/ Anchor(Vision)/ Crabtree(Athena)
-
-
-
1 nos 6 Amp 3-pin socket with 6 Amp switch.
4
-
609
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
4
-
811
Supplying and fixing following way, TPN/SPN, sheet steel, MCB distribution board,IP-42,IK-09 with metal door, 415 V/230V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS) (Make:Legrand(kinox)/L&T(AU)/Anchrd(Uno plus)/Simens(Betagaurd)
-
-
-
16 way, SPN DB
2
-
3399
Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required
-
-
-
6-32Amps4P, 10 KA SP MCB
22
-
238
32 Amps DP,100mA RCBO
2
-
3358
Supplying, installation testing and commissioning following type of light fixture(Recessed or surface mounted)
-
-
-
LED Bay 10w Light fitting (1000 Lumen) forKitchen area of make Halonix Cat Ref.- HLBL-ML11-50-CWL or Equivalent/ to Philips Philips/Panasonic/crompton
15
-
2420
Post Top Lamp for Parking & service road Area
-
-
-
Supply, installation,testing and commissioning of decorative street light pole of length 3 mtr made up of hot dip galvanised both sides 3mm thick MS sheet duly given in PU painted RAL 9006 shade along with base plate with bolting arrangement(Hot dip galvanised), lockable connector compartment (flush with the pole) with connectors & 6A SPN MCB, duly wired upto the luminaire with 2X1.5 sqmm PVC insulated FRLS copper wire, powder coated of approved colour after treatment along with provision of masonary pedestal duly finished with plaster and painting as required or Equivalent make of Philips/Lighting Tech/osram
125
-
24747
LED Post top Latern with die cast Aluminium spigot spun AL,powder coated Top cover,AL PDC heat shink,opal PC diffuser and clear acrylic IP66 (3000k) 40 Watt L:ED for 4mtr pole of make Philips Cat Ref No.- BGP300 LED40 757PSU PC IN S1 or Equivalent of Halonix/Panasonic/philips
125
-
17621
Spike light for Focus for Art/Tree/pathway ,Entrace and Sit out Area
-
-
-
LED Bush/spike light with Dia cast Aluminium housing with toughened glass,IP 65,9 Watt of make Halonix (Cat No :HLOBUL-27-9-CW ) or Equivalent of Halonix/Panasonic/philips
1525
-
3169
LED Bush/spike light with Dia cast Aluminium housing with toughened glass,IP 65,36 Watt of make Halonix (Cat No :HLOSPL-95-36-CW )red/green/orange as per site condition or Equivalent of Halonix/Panasonic/philips
12
-
21637
LED Light fitting Linear type lighter ,IP-65 Landscape light10watt (3000 Lumen) of make Equivalent/ to Halonix/Panasonic/philips
10
-
11134
LED step Light fitting duly powder coated ,IP-65 AL die casting housing 6watt of make Halonix (Cat No-HLOSTL-27-06-WW) or Equivalent to Halonix/Panasonic/philips
62
-
2689
SITC of waterproof powerjunctionbox /powercableterminalbox, IP65madeupofrugged,non corrosive, highimpactpolycarbonate, moldednylonencases connectors that uses crew compression to secure thewires,protection against water jets and dust fromal ldirections,includes5Waymin10Aconnectorterminalblock Max. dimension : 80 * 250 * 85mm
20
-
3398.55
Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA,AKG./Oriplast/TRUEFLOW
-
-
-
50mm dia
6000
-
725
40mm dia
1000
-
443
20mm dia
1000
-
176.2
Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO. (As per Art no.1008 & HSN Code-84812000 of ZOLOTO)
-
-
-
20mm dia Bronze ball valve
200
-
1246
Supply, installation, testing & commissioning of Centrifugal Pump set (Monobloc). The capacity of each pump, Total Head-40m, Discharge-32m3/hr,Hp=2, with 3-phase 50Hz, TEFC induction motor coupled with a common base with electrical control panel suitable for the pump set, including construction of concrete foundation, suction & delivery piping arrangements, fixing of required sizes & nos.of Bronze horizontal Check valves (pressure ratting PN-1.0) like Bronze Ball Valve foot valve with strainer etc with sensor arrangement for filling of OH Tank automatically. all complete as per the technical specification & direction of EIC. (Fire-Fighting Water Supply & Overflow to Drinking cum Flushing system) Make-Texmo/Willo/Grundfos/KBL /Lubi or Equivalent,
-
-
-
2SET (1w+1S)
2
-
67846
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements