Archaeological Survey Of India Tender

Item No. 9: Providing and fixing G.I. wire welded mesh of 10 Guage (2.55 mm) dia, with mesh opening size 1" x 1" by welding on Steel work in built up tubular hot finished seamless hollow tubes trusses for birds not entry to inside including cutting, fixing, welding and Nut Bolting etc all complete at Grabhugriha and Jagamohan of Megheswar Temple

Item No. 10 : Providing and fixing of rectangular FRP Portable Security Cabin Size : 4'-0'' X 4'-0'' X 8'-0'') by water purifier machines for Public Drinking water shade including water storage Tank in overhead and electrical wiring as per machine for drinking water at Megheswar Temple, Bhubaneswar

Item No. 11: Providing, fixing and installing of zero b classic water cooler with purifier, capacity 120 LPH with UV including testing etc all complete including connect CPVC pipe from storage tank to drinking water shade and testing etc all complete.at Megheswar Temple, Bhubaneswar.

Item No. 12: Supply of ESE-60 Early Streamer Emission type Advanced ESE terminal, made up of SS 316L material and works on dual trust design. ESE terminal should comprised of separate electrically isolated dual SS 316L panels surrounding an SS Central Finial. ESE terminal should anticipate advanced triggering of min. 60 s. ESE terminal central finial should be made from solid SS rod and its length should be min. 85mm above surrounding panels. ESE terminal SS 316L is low carbon steel which exhibit better corrosion resistance and are stronger at elevated temperatures performance. For isolation of terminal Delrin Adapter should be provided at bottom of terminal which should give higher dielectric strength. ESE terminal should be tested in European accredited test laboratory after 2011 as per revised NFC 17102:2011 standard. Terminal should be tested for impulse current withstand test in CPRI for 40kA. Terminal should be non-electronic and does not required any external power supply. Model STORMKING ESE-60 TERMINAL, MAKE: PP STORMKING

Item No. 13: Supporting Mast SS: The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at an ideal height of 5m, above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2m but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non-corrosive and made up of medium class SS pipe of 2” dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non-corrosive and made up of SS. Model: Supporting Guyed Mast: 5m X 2” dia with base plate, guying kit and mounting accessories

Item No. 14: Supply of 70Sqmm cross section down conductor of single core flexible Copper cable made of min. 990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr. Model: Single core flexible Cu. Cable 70Sqmm with SS saddles.

Item No. 15: Maintenance free Safe Earthing Electrodes CPRI Certified, Code No. MES- 80 (3m) (G.I.) with ISI G.I. pipe dia 75 mm as secondary electrode of wall thickness 3.5 mm and the primary Earthing Electrode will be 50mm X 6mm X 1nos G.I strip filled with a highly conductive & non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 7,06,500 for 3mtrs.length and Cross Sectional Primary conducting area is 300 sq.mm And solid G.I. base plate seals the unit at the bottom.(MES-FC ground Filling compound will be provided in 25 kgs Bags.)

Item No. 16: Ground Filling Compound (ROHS Certified) (MES GFC 25KG filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag. (2Bags required for each earthing electrode.)

Item No. 17: Installation:- Mounting Lightning terminal on the Mast, Fixing the Mast on the top of roof, Lying the down conductor from the terminal to earth point, Clipping of cables in the building wall, Making 3Nos. of 10ft. earth installation, Pouring of Chemicals with Earthing pipe into the hole and Lying of copper cable to connect the earth pit

Item No. 18: Demolishing dead and damaged laterite stone masonry manually means at boundary wall road side of Megheswar temple, Bhubaneswar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Site-incharge

Item No. 19: Removing mortar from laterite stone and cleaning stone including stacking within a lead of 50 m (stacks of cleaned stone shall be measured) at boundary wall of Megheswar temple, Bhubaneswar

Item No. 20: Demolishing dead and damaged cement concrete manually means nominal concrete 1:3:6 or richer mix (i/c equivalent design mix including disposal of material within 50 metres lead as per direction of Site - in – charge at foundation of boundary wall of Megheswar Temple, Bhubaneswar

Item No. 21: Dismantling steel work in built up sections in angles, tees, flats and channels including all M.S. Grill with Chain-Link post, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead from boundary wall of Megheswar Temple as per direction of Site-in-charge.

Item No. 22: Providing and laying in position cement concrete of specified grade 1:3:6 (1 Cement : 3 coarse sand (zoneIII) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - all work up to plinth level at foundation of boundary wall of Megheswar Temple, Bhubaneswar

Item No. 23: Laterite stone masonry on boundary wall with mortar 1 : 4 (1 Cement : 4 Medium coarse sand) including fine dressing, and finishing thin joint including labour and material cost etc all complete at boundary wall of Megheswar Temple, Bhubaneswar.

Item No. 24: Providing and laying cement concrete with 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, including attached pilasters, coping, etc., up to floor five level, excluding the cost of centering, shuttering and finishing at boundary wall of Megheswar Temple, Bhubaneswar.

Item No. 25: Painting with synthetic enamel paint one or more coats applied on old work of approved brand and manufacture of required colour to give an even shade at chain link with M.S. grill fencing of boundary wall of Megheswar Temple, Bhubaneswar

Item No. 26: 1Excavating trenches of required width for pipes, cables, etc, exceeding 80 mm dia but not exceeding 300 mm dia including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m for drain out waste water and Temple complex drain out of rain water at Megheswar Temple, Bhubaneswar

Item No. 27: Providing and fixing PVC 110mm dia 4kg/Sqcm (PVC SWR type A) fit push fit pipe for drainage system and connection inspection drain chamber including cutting, fitting and testing etc all complete at Roshaghar to municipal drain at Megheswar Temple, Bhubaneswar.

Item No. 28: Providing and fixing of signage for approved design of C.N.B. (1.0 m wide x 3.00 m breadth of plaque including providing sufficient supporting arrangement for durability), on Sand stone including dressing, molding, engraving letter in Tri-language and fixing etc all complete at Megheswar Temple, Bhubaneswar.