All India Institute Of Medical Sciences Tender

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement andmatching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily ,Size of Tile 600 x 600 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and includingpriming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints above plinth level up to floor V Height complete as per direction of Engineer in Charge.External/Internal work - Exposed on wall 20 mm nominal dia Pipes

Providing and fixing unplasticised Rigid PVC, having thermal stability for hot & cold water supply including all PVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, Hanging on wall or Roof,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. U-PVC pipes (working pressure 4 kg /sqcm.) 75 mm dia.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Providing and fixing 15 mm C.P. brass tap with elbow operation lever Approved brand and quality as per the direction of engineer in charge.

Providing and fixing C.P. brass angle valve for Sink, basin mixer and geyser points of approved quality. 15mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Providing & fixing 1.2 mm thick Stainless Steel(Grade 304) OVER HEAD CABINET WITH TWO SHUTTERS of Stainless Steel DOOR as reference to tender drawings (Size: Depth 350mm X Height 600mm X Length is Variable site requirement ) all other fittings wherever required for making OVER HEAD CABINET WITH TWO Stainless Steel(Grade 304) DOOR all are including GST,Lay-out Drawing of Furniture, Installation,Transport,Packing charges & all other complete with approved brand and quality as per the directions of Engineer-in charge. (Note-Payment will be made after the Complete Fixation of the Cabinet & Measurement for payment as per the front elevation I.e only Length of the Stainless Steel(Grade 304) Cabinet) DETAIL SPECIFICATION OF MATERIAL TO BE USED AS BELOW : - A-Body Completely made of 1.2 mm thick Stainless Steel(Grade 304) as per IS 6911 (1992) standard. The shutter of 1.2 mm Thick Stainless Steel(Grade 304) Door front are sandwich type construction, with foam sheet filled in shutter gaps.The shutters are Wall mounted to the modules by hinges which are 90 degree open able & Cabinets able to take load up to 30 kg to 40 kg min The Sound are used to minimize banging noise while closing the shutter,All modules have lock and key arrangement. Modules are completely finished with corrosion resistant Complete module B.Hardware and Other Fittings-All Nuts & Bolts in SS 304 Construction,Auto close Hinges :- S.S. 304,Handle: - SS Handles in all modules

Providing and fixing 19mm thick BWP grade ply as per IS 710 of approved brand (one side decorative 1mm thick and other side balancing lamination 0.8mm thick ) for boxes, shelves, racks, almirah, cupboard and drawer etc. with all other Accessories to be fitted: including providing and fixing on wall & floor with necessary nails,screws necessary Hardware & making necessary provision for all other Hardware fittings and wherever required making it good, all complete. as per the directions of Engineer-in-charge.(Note-Payment will be made only as per the board surface Area & channel,roller,handles, lock,Hinges paid separately).

Providing and fixing cupboard shutter with 19mm thick one side decorative(1mm thick ) and other side balancing lamination (0.8mm thick ) BWP grade block board as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc along with all other Accessories to be fitted: including providing and fixing on wall & floor with necessary Hardware & making necessary provision for all other Hardware fittings and wherever required making it good, all complete. as per the directions of Engineer-in-charge.(Note-Payment will be made only as per the board surface Area & Payment of providing and fixing channel,roller,handles, lock,Hinges shall be paid separately)

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.200 mm

Providing and fixing stainless steel Stainless steel butt hinges 75x47x1.8 mm 0 degree Lshape hinges cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Engaging of Beldar or Coolie for any types of Civil works Releted to its permises Area as per the directions of Engineer-in-charge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize), including finishing complete so as to make it leak proof.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.