Department Of School Education Tender

View complete overview of Nagaland Department Of School Education Tender

Department Of School Education Tender

Works

Civil And Construction

Building Construction

Eprocure

Kohima, Nagaland

Opening Date10 Aug 2024

Closing Date13 Sep 2024

Tender Amount₹ 13,63,00,000

Email

Download

Costs

EMD
₹ 13,63,000
Document Cost
₹ 15,000
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_DSE_670_1
Bid Award Id
View
Tender No
IN-DSE-440931-CW-RFB
Tender Authority
Department Of School Education View
Purchaser Address
-
Website
http://nagalandtenders.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-1533.4 kBTendernotice_1.pdf

Notice Inviting Tender

BOQ-1759.8 kBBOQ_786.xls

BOQ

Corrigendum-11.2 MBCorrigendum_KOH.pd...Corrigendum_KOH.pdf

Document-335.4 MBDPR_Kigwema_Phase_...DPR_Kigwema_Phase_I.pdf

Drawings Phase I

Document-26.0 MBRFB_LSC_Kohima.pdf

RFB

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity976.59

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor.

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity1244

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity2103.1

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity444.42

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity183.86

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:

Quantity-

Rate-

Amount -

Cement mortar 1:6 (1 cement:6 coarse sand)

Quantity147

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity715.47

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity249.42

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity70.15

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity1127.58

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity2275.28

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity1913.25

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity3150

Rate-

Amount -

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity114076.17

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F.P.S (Non-Modular) bricks

Quantity307.12

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity102.09

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity1.37

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in charge and panelling with panels of: (Note: screws shall be paid separately) Butt hinges and necessary

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity39.69

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid separately)

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

35mm thick shutters

Quantity43.68

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity64.35

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity20.48

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity141

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

250x16 mm

Quantity94

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity47

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

125 mm

Quantity94

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity47

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to Opening / wooden frames with rawl plugs screws etc

Quantity272.16

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)

Quantity-

Rate-

Amount -

25 mm thick

Quantity29.08

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity12.92

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity66.35

Rate-

Amount -

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).

Quantity-

Rate-

Amount -

Dark shade pigment using ordinary cement

Quantity12

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity223.59

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity984.6

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity42.45

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity1074

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity27157.49

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity1337.75

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity958.95

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity491.7

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity35.28

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity35.28

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity2788.4

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity4593.4

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity466.91

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

Quantity-

Rate-

Amount -

New work ( Two or more coats) over and including priming coat with water thinnable cement primer

Quantity828.4

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/litre, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two Coats

Quantity958.95

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity262.43

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for separately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity617.22

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity67.11

Rate-

Amount -

Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):

Quantity-

Rate-

Amount -

Flat surfaces

Quantity64.74

Rate-

Amount -

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete

Quantity26.04

Rate-

Amount -

COMPOUND WALL PART A

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Quantity-

Rate-

Amount -

All Kinds of soil

Quantity218.16

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity82.95

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity117.04

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity33.31

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity891.97

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity14749.35

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity74.52

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.04

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity1.89

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity25.92

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity2

Rate-

Amount -

15 mm cement plaster on the rough side of single or half brick wall of mix:

Quantity-

Rate-

Amount -

1:4 (1 cement :4 fine sand)

Quantity837.81

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity837.81

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/litre, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour. Two Coats

Quantity837.81

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity193.2

Rate-

Amount -

COMPOUND WALL PART B

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Quantity-

Rate-

Amount -

All Kinds of soil

Quantity43.48

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity10.44

Rate-

Amount -

Providing and fixing G.I Chain Link Fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-Charge

Quantity-

Rate-

Amount -

Made of G.I wire of dia 4mm

Quantity1391.4

Rate-

Amount -

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Quantity1816.55

Rate-

Amount -

WATER BOUND MACADAM (W.B.M) ROAD

Quantity-

Rate-

Amount -

Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Unit Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and across sections, and transporting to the embankment location within all lifts and lead upto 1000m

Quantity2419.2

Rate-

Amount -

Compacting Original Ground Arounds Loosening of the ground upto a level of 500 mm below the sub grade level, watered, graded and compacted in layers to meet the requirement of table 300-2 for sub-grade construction

Quantity-

Rate-

Amount -

Compacting Original Ground supporting sub-grade

Quantity1008

Rate-

Amount -

Compacting Original Ground supporting Embankment

Quantity1008

Rate-

Amount -

Construction of granular sub-base by providing granular material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Quantity-

Rate-

Amount -

By Mix in Place Method

Quantity-

Rate-

Amount -

Granular Sub-Base Grading-I Material

Quantity302.4

Rate-

Amount -

Granular Sub-Base Grading-II Material

Quantity302.4

Rate-

Amount -

Granular Sub-Base Grading-III Material

Quantity302.4

Rate-

Amount -

Water Bound Macadam

Quantity-

Rate-

Amount -

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density

Quantity-

Rate-

Amount -

By Manual Means

Quantity-

Rate-

Amount -

Grading II

Quantity-

Rate-

Amount -

Using Screening Crushable type such as Moorum or Gravel

Quantity302.4

Rate-

Amount -

Grading III

Quantity-

Rate-

Amount -

Using Screening Crushable type such as Moorum or Gravel

Quantity302.4

Rate-

Amount -

Prime Coat

Quantity-

Rate-

Amount -

Prime Coat over WMM / WBM

Quantity-

Rate-

Amount -

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sum using mechanical means.

Quantity4032

Rate-

Amount -

Tack Coat

Quantity-

Rate-

Amount -

Tack Coat on Bituminous surfaces

Quantity-

Rate-

Amount -

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom.

Quantity4032

Rate-

Amount -

Bituminous Macadam Grading -I

Quantity-

Rate-

Amount -

Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

Quantity201.6

Rate-

Amount -

Bituminous Macadam Grading -II

Quantity-

Rate-

Amount -

Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

Quantity201.6

Rate-

Amount -

Surface Dressing

Quantity-

Rate-

Amount -

Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8- 10 tonne smooth wheeled steel roller

Quantity-

Rate-

Amount -

13 mm nominal chipping size

Quantity4032

Rate-

Amount -

Seal Coat Description Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats

Quantity-

Rate-

Amount -

Type A

Quantity4032

Rate-

Amount -

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:

Quantity-

Rate-

Amount -

600mm dia R.C.C. Pipe

Quantity23

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity243.94

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity185.47

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity1612.8

Rate-

Amount -

UNDER GROUND TANK 1

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity67.48

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All Kinds of soil

Quantity40.49

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

Ordinary or Hard Rock

Quantity44.98

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity3.96

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.96

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity36.17

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity216.48

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity3453

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity167.78

Rate-

Amount -

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.

Quantity-

Rate-

Amount -

With 20 mm diameter round bar

Quantity10

Rate-

Amount -

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

LD-2.5

Quantity-

Rate-

Amount -

Rectangular shape 600x450mm internal dimensions

Quantity1

Rate-

Amount -

UNDER GROUND TANK 2

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity23.28

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All Kinds of soil

Quantity20.95

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

Ordinary or Hard Rock

Quantity11.64

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity6.98

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity1.96

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity20.2

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity95.97

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity3660

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity75.31

Rate-

Amount -

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.

Quantity-

Rate-

Amount -

With 20 mm diameter round bar

Quantity7

Rate-

Amount -

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

LD-2.5

Quantity-

Rate-

Amount -

Rectangular shape 600x450mm internal dimensions

Quantity1

Rate-

Amount -

LANDSCAPING WORK

Quantity-

Rate-

Amount -

Planting of Trees and their Maintenance for one Year

Quantity-

Rate-

Amount -

Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

Quantity228

Rate-

Amount -

Tree Guard with MS Angle Iron and Steel Wire

Quantity-

Rate-

Amount -

Providing and fixing tree guard 0.60 metre square, 2.00 metre high fabricated with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3; mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together

Quantity228

Rate-

Amount -

SEPTIC TANK 1

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity14.76

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity14.76

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.11

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.86

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity36.67

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.28

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity17.47

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity21.74

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

SEPTIC TANK 2

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity23.28

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity23.28

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.62

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity1.64

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity76

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity8.44

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity24.96

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity33.34

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

RAINWATER HARVESTING

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity157.5

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity31.85

Rate-

Amount -

12 mm cement plaster finished with a floating coat of neat cement of mix:

Quantity-

Rate-

Amount -

1:3 (1 cement :4 fine sand)

Quantity377.44

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity86

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 160 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C.fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Quantity250

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 years or any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Quantity439

Rate-

Amount -

DEMOLITION AND RETROFITTING WORK OF EXISTING BLOCK

Quantity-

Rate-

Amount -

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge.

Quantity4.87

Rate-

Amount -

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.

Quantity-

Rate-

Amount -

In cement mortar

Quantity9.18

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:

Quantity-

Rate-

Amount -

Of area 3 sq. metres and below

Quantity104

Rate-

Amount -

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish of the dumping ground, all complete as per the direction of Engineer-in-charge

Quantity-

Rate-

Amount -

With cement mortar 1:4 (1 cement: 4 fine sand)

Quantity611.19

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Quantity-

Rate-

Amount -

For thickness of tiles 10 mm to 25 mm

Quantity916.78

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity19.73

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity916.78

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity91.68

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity217.83

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

Quantity-

Rate-

Amount -

New work ( Two or more coats) over and including priming coat with water thinnable cement primer

Quantity387.25

Rate-

Amount -

Providing and laying in-situ / ready mix M25 grade RCC jacketing work around the existing COLUMN, BEAM, SLAB etc.complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine aggregates of required specifications ( VSI sand finely washed etc ), height of 8 to 10 meter)

Quantity79.51

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity9624.96

Rate-

Amount -

ACADEMIC PLUMBING GROUND FLOOR

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity5

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity9

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity4

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity5

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity4

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity4

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity126

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity88

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity50

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity102

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity258.7

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Quantity-

Rate-

Amount -

With common burnt clay F.P.S ( non-modular )bricks of class designation 7.5

Quantity9

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity13

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with watertight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity5

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity28000

Rate-

Amount -

ACADEMIC FIREFIGHTING GROUND FLOOR

Quantity-

Rate-

Amount -

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/ SD

Quantity10

Rate-

Amount -

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm Dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Quantity1035

Rate-

Amount -

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30 meter high pressure polypropylene (Polyhouse) long fitted with necessary accessories complete as per specification no. FF-FFA/HV

Quantity2

Rate-

Amount -

Providing and Installation CO2 EXTINGUISHER

Quantity3

Rate-

Amount -

Providing and Installation ABC EXTINGUSHER

Quantity3

Rate-

Amount -

Providing and Installation Hooter

Quantity2

Rate-

Amount -

Providing and Installation Manual Call Point

Quantity2

Rate-

Amount -

Providing and Installation Fire Alarm Control Panel

Quantity1

Rate-

Amount -

Providing and Installation Fire Pump

Quantity1

Rate-

Amount -

Providing and Installation Butterfly valve

Quantity2

Rate-

Amount -

ACADEMIC GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

a. Light point Short

Quantity16

Rate-

Amount -

b. Light point Medium

Quantity12

Rate-

Amount -

c. Light point Long

Quantity25

Rate-

Amount -

d. Call bell Point Long

Quantity4

Rate-

Amount -

e. Fan point medium

Quantity25

Rate-

Amount -

f. Exhaust fan point medium

Quantity15

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity35

Rate-

Amount -

b. Long point

Quantity35

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity15

Rate-

Amount -

b. Long point

Quantity15

Rate-

Amount -

Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity2830

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity3060

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity1810

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity700

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity350

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity1200

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity30

Rate-

Amount -

b. MCB 16A

Quantity10

Rate-

Amount -

c. MCB 20A

Quantity15

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity7

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity10

Rate-

Amount -

f. MCB Box 10 ways

Quantity5

Rate-

Amount -

g. MCB Box 12 ways

Quantity4

Rate-

Amount -

h. Main Switch 100A

Quantity2

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity2

Rate-

Amount -

j. TPN 100A

Quantity2

Rate-

Amount -

k. Change over Switch 100A

Quantity2

Rate-

Amount -

l. Angle holder

Quantity7

Rate-

Amount -

m. Bracket holder

Quantity13

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity45

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity15

Rate-

Amount -

p. LED bulb 9w

Quantity15

Rate-

Amount -

q. Call Bell Ding Dong

Quantity4

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity4

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity2

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity15

Rate-

Amount -

c. Lightning arrester

Quantity2

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity50

Rate-

Amount -

Energy Meter

Quantity2

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity460

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity350

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity100

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

Supplying, erecting, testing & commissioning of 5 kVA capacity on line pure sine wave, PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification. (With batteries)

Quantity1

Rate-

Amount -

ACADEMIC EXTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 20A

Quantity65

Rate-

Amount -

b. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

c. Main Switch 100A

Quantity1

Rate-

Amount -

d. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

e. TPN 100A

Quantity1

Rate-

Amount -

f. Change over Switch 100A

Quantity1

Rate-

Amount -

g. 60 watt LED for street Light

Quantity65

Rate-

Amount -

h. Pole

Quantity65

Rate-

Amount -

i. Pole Arm

Quantity65

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be at least 3m or as per moisture availability.

Quantity1

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity8

Rate-

Amount -

c. Lightning arrester

Quantity2

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity20

Rate-

Amount -

Providing and Installation Energy Meter

Quantity1

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Street light

Quantity850

Rate-

Amount -

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 30 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 5.9 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 65 ltr etc., as per specification

Quantity1

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR CIVIL

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity328.33

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity218.88

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity380

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity601.77

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity46.25

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity51.87

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity128.21

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity100.41

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity21.16

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity164.16

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity467.9

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity798.11

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity21.12

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity2034.7

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity23238.51

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity93.97

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.33

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity20.69

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

30mm thick shutters

Quantity2.52

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity34.65

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity11.03

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity42

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

250x16 mm

Quantity28

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity14

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

125 mm

Quantity28

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity14

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity131.22

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse 25 mm thick

Quantity8.37

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity6.81

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity118.3

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity42.81

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity264.5

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity466.33

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity257.47

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity264.5

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity466.33

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity1447.59

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity1454.63

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two Coats

Quantity257.47

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity235.01

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity312.66

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity24.25

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity102.06

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR CIVIL

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity39.27

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity146.71

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity126

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity5374.38

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity54.25

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.21

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity14.28

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity24.75

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity7.88

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity30

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

250x16 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity10

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

125 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity10

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity64.8

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity2.3

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity43.2

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity41.2

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity171.61

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity382.02

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity7420.39

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity263.74

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity179.19

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity263.74

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity885.85

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity706.66

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two Coats

Quantity179.19

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity166.86

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity15.4

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity102.06

Rate-

Amount -

BOYS HOSTEL SEPTIC TANK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity12.38

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity12.38

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity4.57

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.59

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity100

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.02

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity29.12

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity14.52

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity8

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity3

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity3

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity2

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity2

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity29.47

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity3.3

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity50.58

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S(non-modular) bricks of class designateion 7.7. Ground floor

Quantity3

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity5

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity6

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity3

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity1

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity18.9

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity2

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity11000

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

a. Light point Short

Quantity10

Rate-

Amount -

b. Light point Medium

Quantity10

Rate-

Amount -

c. Light point Long

Quantity3

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

e. Fan point medium

Quantity9

Rate-

Amount -

f. Exhaust fan point medium

Quantity6

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity12

Rate-

Amount -

b. Long point

Quantity12

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity9

Rate-

Amount -

b. Long point

Quantity9

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1130

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1010

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity920

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity510

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity260

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity610

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity9

Rate-

Amount -

b. MCB 16A

Quantity12

Rate-

Amount -

c. MCB 20A

Quantity3

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity2

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

f. MCB Box 10 ways

Quantity2

Rate-

Amount -

g. MCB Box 12 ways

Quantity2

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

j. TPN 100A

Quantity1

Rate-

Amount -

k. Change over Switch 100A

Quantity1

Rate-

Amount -

l. Angle holder

Quantity6

Rate-

Amount -

m. Bracket holder

Quantity6

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity12

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity6

Rate-

Amount -

p. LED bulb 9w

Quantity5

Rate-

Amount -

q. Call Bell Ding Dong

Quantity2

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity1

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity5

Rate-

Amount -

c. Lightning arrester

Quantity1

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity20

Rate-

Amount -

Supplying and installing Energy Meter

Quantity2

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity120

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity15

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity50

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

a. Light point Short

Quantity7

Rate-

Amount -

b. Light point Medium

Quantity7

Rate-

Amount -

c. Light point Long

Quantity2

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

e. Fan point medium

Quantity6

Rate-

Amount -

f. Exhaust fan point medium

Quantity4

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity10

Rate-

Amount -

b. Long point

Quantity8

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

b. Long point

Quantity5

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1150

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1070

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity920

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity510

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity230

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity450

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity6

Rate-

Amount -

b. MCB 16A

Quantity9

Rate-

Amount -

c. MCB 20A

Quantity1

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity1

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity1

Rate-

Amount -

f. MCB Box 10 ways

Quantity1

Rate-

Amount -

g. MCB Box 12 ways

Quantity1

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

i. Angle holder

Quantity3

Rate-

Amount -

j. Bracket holder

Quantity3

Rate-

Amount -

k. LED Double tube light fitting 2x40wx4 with all accessories

Quantity10

Rate-

Amount -

l. Exhaust fan with all accessories

Quantity4

Rate-

Amount -

m. LED bulb 9w

Quantity3

Rate-

Amount -

n. Call Bell Ding Dong

Quantity1

Rate-

Amount -

o. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR CIVIL

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity328.33

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity218.88

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity380

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity601.77

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity46.25

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity51.87

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity155.93

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity105.9

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity21.16

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity164.16

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity644.9

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity798.11

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity21.12

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity1173.15

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity28723.83

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity94.34

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.33

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity20.69

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

30mm thick shutters

Quantity2.52

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity34.65

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity11.03

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity42

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

250x16 mm

Quantity28

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity14

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

125 mm

Quantity28

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity14

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity126.36

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse 25 mm thick)

Quantity8.37

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity6.81

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity111.7

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity42.81

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity264.5

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity467.68

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity257.47

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity264.5

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity467.68

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity1450.29

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity1457.33

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two Coats

Quantity257.47

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity235.01

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity286.74

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity21.95

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity102.06

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR CIVIL

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity39.47

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity145.23

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity126

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity5402.42

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity53.67

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.21

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity14.28

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity24.75

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity7.88

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity30

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

250x16 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity10

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

125 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity10

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity64.8

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity2.3

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity43.2

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity41.2

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity171.61

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity382.02

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity7420.39

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity259.81

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity179.19

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity259.81

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity877.99

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity698.8

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two Coats

Quantity179.19

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity153.9

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity15.4

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity64.35

Rate-

Amount -

GIRLS HOSTEL SEPTIC TANK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity12.38

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity12.38

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity4.57

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.59

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity100

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.02

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity29.12

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity14.52

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity3

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity2

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity2

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity29.47

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity3.3

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity50.58

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Quantity3

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity5

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity1

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity1

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity18.9

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity2

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity11000

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

a. Light point Short

Quantity10

Rate-

Amount -

b. Light point Medium

Quantity10

Rate-

Amount -

c. Light point Long

Quantity3

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

e. Fan point medium

Quantity9

Rate-

Amount -

f. Exhaust fan point medium

Quantity6

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity9

Rate-

Amount -

b. Long point

Quantity9

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

b. Long point

Quantity6

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1250

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1100

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity950

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity300

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity400

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity450

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity9

Rate-

Amount -

b. MCB 16A

Quantity12

Rate-

Amount -

c. MCB 20A

Quantity3

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity2

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

f. MCB Box 10 ways

Quantity2

Rate-

Amount -

g. MCB Box 12 ways

Quantity2

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

j. TPN 100A

Quantity1

Rate-

Amount -

k. Change over Switch 100A

Quantity1

Rate-

Amount -

l. Angle holder

Quantity6

Rate-

Amount -

m. Bracket holder

Quantity6

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity12

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity6

Rate-

Amount -

p. LED bulb 9w

Quantity5

Rate-

Amount -

q. Call Bell Ding Dong

Quantity2

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity1

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity5

Rate-

Amount -

c. Lightning arrester

Quantity1

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity20

Rate-

Amount -

Supplying and installing Energy Meter

Quantity2

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity70

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity15

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity50

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

a. Light point Short

Quantity7

Rate-

Amount -

b. Light point Medium

Quantity7

Rate-

Amount -

c. Light point Long

Quantity2

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

e. Fan point medium

Quantity6

Rate-

Amount -

f. Exhaust fan point medium

Quantity4

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

b. Long point

Quantity6

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. Medium point

Quantity4

Rate-

Amount -

b. Long point

Quantity4

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1050

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity900

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity1000

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity890

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity450

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity420

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity6

Rate-

Amount -

b. MCB 16A

Quantity9

Rate-

Amount -

c. MCB 20A

Quantity1

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity1

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity1

Rate-

Amount -

f. MCB Box 10 ways

Quantity1

Rate-

Amount -

g. MCB Box 12 ways

Quantity1

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

i. Angle holder

Quantity3

Rate-

Amount -

j. Bracket holder

Quantity3

Rate-

Amount -

k. LED Double tube light fitting 2x40wx4 with all accessories

Quantity8

Rate-

Amount -

l. Exhaust fan with all accessories

Quantity4

Rate-

Amount -

m. LED bulb 9w

Quantity3

Rate-

Amount -

n. Call Bell Ding Dong

Quantity1

Rate-

Amount -

o. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.