Bridge And Roof Company India Limited Tender

View complete overview of Nagaland Bridge And Roof Company India Limited Tender

Bridge And Roof Company India Limited Tender

Works

Civil And Construction

Building Construction

Eprocure

Kiphire, Nagaland

Opening Date3 Jan 2025

Closing Date24 Jan 2025

Tender Amount₹ 5,26,80,454

Email

Download

Costs

EMD
₹ 10,54,000
Document Cost
₹ 12,449
Tender Fee
Refer Documents

Summary

Construction Of 02 Nos Type V Quarters G Plus I, 04 Nos Single Officer Accommodation G Plus 1, And 02 Nos Single Officer Accommodation G With Allied Services And Development Works For Assam Rifles Battalion At Phelungre Nagaland

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Construction of 2 No. Type V Qtr (G+1) with allied Service and development works for Assam Rifles Battalion at Phelungre (Ngaland), Construction of 4 Nos. Single Officer Accommodation (G+I) with allied services and development works for Assam Rifles Battalion at Phelungre, Nagaland & Construction of 2 Nos. Single Officer Accomodation (G) with allied services and development works for Assam Rifles Battalion at Phelungre, Nagaland

Contact

Tender Id
2025_BandR_842614_1
Tender No
B AND R/GO/51256/AR /NIT/CIVIL/P-11/01
Tender Authority
Bridge And Roof Company India Limited View
Purchaser Address
-
Website
http://eprocure.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-23.0 MBeNIT-Const-2-TYPEV...eNIT-Const-2-TYPEV-Pkg-11-Phelungre.pdf

eNIT-Const-2-TYPEV-Pkg-11-Phelungre.pdf

Tender Notice-11.3 MBTendernotice_1.pdf

eNotice-NIT-Const-2-TYPEV-Pkg-11-Phelungre.pdf

BOQ-11.7 MBBOQ_885709.xls

BOQ-package11

Document-281.0 MB2 NOS TYPE V QTR.(...2 NOS TYPE V QTR.(G+I) 1 BLOCK Assam Rifles Batalion Phelungre NAGALAND ELECTRICAL 01.pdf

Document-27824.3 kBMake-List.pdf

Make List

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Quantity200

Rate30

Amount 6074

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m

Quantity-

Rate-

Amount -

All kinds of soil

Quantity200

Rate58

Amount 11792

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity141.48

Rate430

Amount 60887.33

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

Quantity-

Rate-

Amount -

2.7.1 Ordinary rock

Quantity25

Rate865

Amount 21625.25

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity83.93

Rate218

Amount 18372.28

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity161.38

Rate531

Amount 85844.48

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity106.56

Rate4527

Amount 482404.58

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity7.42

Rate420

Amount 3122.48

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Quantity-

Rate-

Amount -

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity98.87

Rate93

Amount 9257.2

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

Quantity213.12

Rate536

Amount 114351.67

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity1.99

Rate15138

Amount 30125.22

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity35.52

Rate13972

Amount 496291.83

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity1

Rate13251

Amount 13251.19

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity28.89

Rate947

Amount 27368.36

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity46

Rate119

Amount 5506.66

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity28.89

Rate238

Amount 6889.69

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity59.32

Rate1427

Amount 84700.06

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity65.75

Rate16751

Amount 1101440.71

All works above plinth level upto floor V level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity126.36

Rate21114

Amount 2668078.76

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity56.97

Rate1442

Amount 82156.44

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity36.28

Rate645

Amount 23402.78

Suspended floors, roofs, landings, balconies and access platform.

Quantity591.23

Rate1605

Amount 949338.01

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity498.88

Rate1274

Amount 635727.77

Columns, pillars, piers, abutments, posts and struts.

Quantity378.08

Rate1684

Amount 636936.25

Stairs (excluding landings) except spiral staircases.

Quantity114.02

Rate1377

Amount 157095.62

Weather shade, Chajjas, corbels etc., including edges

Quantity10.18

Rate1707

Amount 17378.07

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity9115.31

Rate187

Amount 1711764.06

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity17482

Rate187

Amount 3282944.78

BRICK WORK

Quantity-

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity27.17

Rate14415

Amount 391675.38

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement Mortar 1:6 (1 cement : 6 coarse sand).

Quantity120.85

Rate19074

Amount 2305121.9

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity268.63

Rate2354

Amount 632363.08

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Quantity5.18

Rate181

Amount 937.99

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity59.24

Rate135

Amount 8028.2

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity0.9

Rate155426

Amount 139883.57

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood- 35 mm thick shutters

Quantity26.46

Rate5261

Amount 139226.96

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity26.46

Rate4272

Amount 113057.49

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity33.81

Rate6464

Amount 218563.05

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Quantity15.75

Rate5262

Amount 82886.27

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :

Quantity-

Rate-

Amount -

2nd class teak wood: 50x12 mm

Quantity19.5

Rate401

Amount 7824.18

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity33.81

Rate840

Amount 28427.79

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):

Quantity-

Rate-

Amount -

12 mm thick

Quantity479.94

Rate1397

Amount 670658.56

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Quantity-

Rate-

Amount -

18 mm thick

Quantity20.52

Rate2281

Amount 46821.51

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity52

Rate135

Amount 7031.44

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity64

Rate492

Amount 31491.2

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity26

Rate190

Amount 4945.2

150 x 10 mm

Quantity6

Rate158

Amount 949.5

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity64

Rate111

Amount 7139.2

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Quantity-

Rate-

Amount -

40 mm

Quantity6

Rate554

Amount 3329.28

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Quantity24

Rate133

Amount 3199.92

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Triple strip vertical type

Quantity48

Rate93

Amount 4509.6

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :

Quantity-

Rate-

Amount -

20 mm dia

Quantity42

Rate786

Amount 33013.26

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity26.46

Rate6577

Amount 174045.15

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity32.4

Rate968

Amount 31371.95

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineer in-charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity12.76

Rate7262

Amount 92672.69

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity32.09

Rate2035

Amount 65306.68

STEEL WORK

Quantity-

Rate-

Amount -

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity506.88

Rate414

Amount 209909.15

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity205.68

Rate298

Amount 61309.09

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Quantity50

Rate1282

Amount 64124

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity170.88

Rate329

Amount 56250.28

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Quantity30

Rate163

Amount 4914.3

Supplying and fixing rolling shutters make, made of required siae M.S. laths, interlocked togeather through their entire length snd joined togeather at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequste strength conforming to IS: 4454-part 1 and M.S. top cover of required thickness for rolling shutters.

Quantity-

Rate-

Amount -

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Quantity13.86

Rate6302

Amount 87353.07

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity16

Rate387

Amount 6207.04

ALUMINIUM WORK

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion

Quantity-

Rate-

Amount -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity202.75

Rate976

Amount 198038.09

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Quantity-

Rate-

Amount -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity202.75

Rate1183

Amount 239871.5

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity41.69

Rate2136

Amount 89057.34

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity9

Rate311

Amount 2799.54

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in- charge complete.

Quantity-

Rate-

Amount -

255 X 19 mm

Quantity24

Rate689

Amount 16549.92

Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

Quantity-

Rate-

Amount -

Upto 5 mm depth and 5 mm width

Quantity165.88

Rate272

Amount 45240.45

Upto 10 mm depth and 10 mm width

Quantity20

Rate370

Amount 7415.4

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity375.03

Rate616

Amount 231232.25

15mm plaster on rough side of single brick work:1:6 (1 cement : 6 coarse sand)

Quantity562.54

Rate710

Amount 399577.79

20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity575.29

Rate840

Amount 483594.53

6 mm cement plaster of mix: 1:3 (1 cement : 3 fine sand)

Quantity158.03

Rate530

Amount 83766.96

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity16.11

Rate126

Amount 2043.39

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity16.11

Rate143

Amount 2313.23

Neat cement punning

Quantity62.59

Rate4

Amount 288.54

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity372.7

Rate259

Amount 96685.83

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity575.29

Rate349

Amount 201063.86

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity77.15

Rate400

Amount 30931.75

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity352.7

Rate254

Amount 89800.95

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Quantity50.69

Rate116

Amount 5892.71

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity26.46

Rate128

Amount 3405.67

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity372.7

Rate135

Amount 50314.5

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.

Quantity-

Rate-

Amount -

New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.

Quantity730.32

Rate388

Amount 284006.84

FLOORING WORK

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily. Double charge vitrified tile polished finish of size

Quantity-

Rate-

Amount -

Size of Tile 600 x 600 mm

Quantity88.46

Rate2695

Amount 238403.24

Size of tile 600 x 1200 mm

Quantity53.08

Rate2947

Amount 156445.34

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity28.04

Rate3071

Amount 86135.52

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity42.86

Rate3574

Amount 153216.79

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity8.9

Rate4270

Amount 38004.34

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity94.33

Rate1959

Amount 184867.93

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity117.52

Rate1965

Amount 231030.22

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity34.05

Rate1141

Amount 38871.82

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity8

Rate166

Amount 1332.24

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Quantity-

Rate-

Amount -

18 mm thick

Quantity2

Rate1195

Amount 2391.1

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Quantity-

Rate-

Amount -

Granite stone slab of colour black,cherry/ruby red-Area of slab over 0.50 sq.m.

Quantity3

Rate9269

Amount 27809.37

Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Quantity-

Rate-

Amount -

Granite work

Quantity12

Rate877

Amount 10528.44

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Quantity2

Rate1692

Amount 3385.66

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity50

Rate669

Amount 33489

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler 110 mm

Quantity2

Rate251

Amount 502.52

Single tee without door 110x110x110 mm

Quantity2

Rate399

Amount 799.12

Bend 87.5° 110 mm bend

Quantity8

Rate276

Amount 2212

Shoe (Plain) 110 mm

Quantity8

Rate242

Amount 1943.04

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity25

Rate648

Amount 16208

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity7

Rate100

Amount 702.38

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity7

Rate545

Amount 3815.28

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity7

Rate558

Amount 3909.15

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity210

Rate1288

Amount 270530.4

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity13.65

Rate15732

Amount 214752.31

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Quantity-

Rate-

Amount -

For vertical surface two coats @ 0.70 kg per sqm

Quantity2

Rate850

Amount 1701.94

For horizontal surface one coat @1.10 kg per sqm.

Quantity1

Rate652

Amount 652.5

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

Quantity-

Rate-

Amount -

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Quantity10

Rate4082

Amount 40824.7

ROAD WORK

Quantity-

Rate-

Amount -

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :

Quantity-

Rate-

Amount -

7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity18

Rate16578

Amount 298413.36

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Quantity145

Rate2118

Amount 307133.2

DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:

Quantity-

Rate-

Amount -

White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.

Quantity2

Rate12110

Amount 24220.4

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity4

Rate11605

Amount 46423.2

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Quantity2

Rate27307

Amount 54615.36

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap

Quantity8

Rate6212

Amount 49696.4

White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps

Quantity2

Rate5721

Amount 11443.14

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm

Quantity2

Rate13146

Amount 26292.68

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe 32 mm dia

Quantity6

Rate190

Amount 1143.06

Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of EIC.

Quantity8

Rate1856

Amount 14852.24

Providing and fixing CP brass single lever telephonic wall mixture approved quality and make and as per the direction of EIC. (a) 15mm nominal dia

Quantity6

Rate12817

Amount 76906.74

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Quantity-

Rate-

Amount -

Rectangular shape 1500x450 mm

Quantity2

Rate3806

Amount 7612.98

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia Sand cast iron S&S pipe as per IS: 1729

Quantity50

Rate2132

Amount 106625.5

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity30

Rate342

Amount 10271.4

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity15

Rate646

Amount 9691.65

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity16

Rate1111

Amount 17786.4

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity4

Rate865

Amount 3460.04

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity8

Rate1075

Amount 8601.6

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

Quantity-

Rate-

Amount -

100X100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate2175

Amount 4351.74

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate1405

Amount 2811.92

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1215

Amount 1215.34

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate2162

Amount 4325.34

Providing and fixing sand cast iron S & S off sets as per IS : 1729.

Quantity-

Rate-

Amount -

152 mm off sets With100 mm dia pipe

Quantity2

Rate1395

Amount 2791.6

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity10

Rate823

Amount 8230

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity10

Rate837

Amount 8370.4

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet Sand cast iron S & S as per IS - 1729

Quantity10

Rate2939

Amount 29398

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity30

Rate145

Amount 4370.4

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity10

Rate428

Amount 4287.9

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity8

Rate1257

Amount 10060.4

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity10

Rate306

Amount 3064.6

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity8

Rate2955

Amount 23647.52

Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete

Quantity10

Rate1973

Amount 19735.3

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall

Quantity-

Rate-

Amount -

PN - 16 Pipe, 20mm OD (SDR-7.4)

Quantity50

Rate534

Amount 26702

PN - 16 Pipe, 25mm OD (SDR-7.4)

Quantity28

Rate662

Amount 18539.64

PN - 16 Pipe, 32mm OD (SDR-7.4)

Quantity15

Rate751

Amount 11276.85

PN - 16 Pipe, 40mm OD (SDR-7.4)

Quantity4

Rate1096

Amount 4387.16

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity50

Rate930

Amount 46518

20mm dia nominal bore

Quantity90

Rate1076

Amount 96853.5

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work

Quantity-

Rate-

Amount -

PN - 16 Pipe, 40 mm OD (SDR-7.4)

Quantity75

Rate878

Amount 65865

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity6

Rate1115

Amount 6690.66

32 mm nominal bore

Quantity2

Rate1235

Amount 2471.32

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity1

Rate636

Amount 636.48

20mm nominal bore

Quantity10

Rate686

Amount 6869.6

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity2

Rate836

Amount 1672.2

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore, vertical

Quantity1

Rate2197

Amount 2197.76

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity8

Rate348

Amount 2787.6

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity1

Rate3586

Amount 3586.44

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity4000

Rate20

Amount 81280

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity3

Rate202

Amount 606.12

Providing and fixing PTMT grating of approved quality and colour. Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity10

Rate69

Amount 695.5

125 mm nominal dia with 25 mm waste hole

Quantity2

Rate94

Amount 189.58

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity10

Rate909

Amount 9095.2

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1476

Amount 2953.72

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity4

Rate1245

Amount 4983.28

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity20

Rate1048

Amount 20961.8

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Quantity1

Rate789

Amount 789.92

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Quantity1

Rate359

Amount 359.86

SUBHEAD NO. 3 : DRAINAGE

Quantity-

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity80

Rate1238

Amount 99104.8

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity5

Rate2294

Amount 11470.05

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity75

Rate1444

Amount 108361.5

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity80

Rate874

Amount 69938.4

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180 X 150 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate5307

Amount 5307.97

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.):

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity9

Rate24480

Amount 220328.82

Extra for depth for manholes Size 90 X 80 cm

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity1

Rate17024

Amount 17024.58

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate58712

Amount 58712.69

DSR-INTERNAL AND EXTERNAL ELECTRICAL WORKS

Quantity-

Rate-

Amount -

WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group B

Quantity104

Rate2475

Amount 257497.76

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity260

Rate488

Amount 126895.6

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity280

Rate576

Amount 161291.2

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity20

Rate699

Amount 13992.6

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Quantity40

Rate2105

Amount 84207.2

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity24

Rate215

Amount 5178

3 pin 5/6 amp socket outlet

Quantity24

Rate255

Amount 6133.2

Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.

Quantity2

Rate207

Amount 414.74

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity12

Rate772

Amount 9275.4

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity20

Rate83

Amount 1675.8

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Quantity42

Rate999

Amount 41965.56

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity14

Rate1227

Amount 17185

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity10

Rate942

Amount 9426.2

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

6 way (4 + 18), Double door

Quantity2

Rate10419

Amount 20838.1

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity1

Rate15735

Amount 15735.39

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity39

Rate536

Amount 20913.36

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

100 amps

Quantity1

Rate2570

Amount 2570.19

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity1

Rate563

Amount 563.47

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity4

Rate15651

Amount 62606.4

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity5

Rate106

Amount 534.15

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity40

Rate2036

Amount 81442

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity6

Rate1085

Amount 6510.36

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity120

Rate263

Amount 31671.6

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity25

Rate412

Amount 10316.5

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity2

Rate253

Amount 506.92

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity1

Rate12706

Amount 12706.45

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity75

Rate810

Amount 60798.75

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity2

Rate502

Amount 1005.46

4 X 16 sq. mm (28mm)

Quantity2

Rate647

Amount 1294.54

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity43

Rate431

Amount 18554.93

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity4

Rate986

Amount 3946.44

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity12

Rate446

Amount 5354.04

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity10

Rate433

Amount 4336

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity25

Rate3783

Amount 94575.75

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100 mm dia

Quantity10

Rate1386

Amount 13866.9

150 mm dia

Quantity5

Rate1516

Amount 7582.8

CONSTRUCTION OF 4 NOS SINGLE OFFICER ACCOMMODATION (G+I) WITH ALLIED SERVICES AND DEVELOPMENT WORKS FOR ASSAM RIFLES BATTILION AT PHELUNGRE, NAGALAND

Quantity-

Rate-

Amount -

DSR-CIVIL WORKS

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Quantity340

Rate30

Amount 10332.6

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m

Quantity-

Rate-

Amount -

All kinds of soil

Quantity340

Rate59

Amount 20060

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity306.86

Rate430

Amount 132124.71

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity69.59

Rate219

Amount 15240.91

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity254.86

Rate532

Amount 135641.59

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity35.62

Rate4529

Amount 161336.16

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity4.8

Rate421

Amount 2020.99

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:

Quantity-

Rate-

Amount -

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity63.98

Rate93

Amount 5993.65

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity79.15

Rate536

Amount 42490.09

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity11.87

Rate15145

Amount 179782.78

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity9.11

Rate13979

Amount 127351.15

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity2

Rate13257

Amount 26515.82

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity14.72

Rate947

Amount 13951.76

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity19.86

Rate119

Amount 2378.63

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity14.72

Rate238

Amount 3512.34

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity27.29

Rate1428

Amount 38985.95

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity52.54

Rate16760

Amount 880594.57

All works above plinth level upto floor V level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity85.32

Rate21125

Amount 1802437.9

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity30.58

Rate1442

Amount 44121.74

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity90.28

Rate645

Amount 58265.81

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity6.08

Rate1403

Amount 8531.58

Suspended floors, roofs, landings, balconies and access platform.

Quantity276.46

Rate1606

Amount 444135.75

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity233.08

Rate1274

Amount 297165.35

Columns, pillars, piers, abutments, posts and struts.

Quantity235.76

Rate1685

Amount 397378.2

Stairs (excluding landings) except spiral staircases.

Quantity133.17

Rate1378

Amount 183573.51

Weather shade, Chajjas, corbels etc., including edges

Quantity9.8

Rate1707

Amount 16737.81

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity5203.97

Rate187

Amount 977721.88

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity13740.32

Rate187

Amount 2581531.32

BRICK WORK

Quantity-

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity18.63

Rate14423

Amount 268701.42

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement Mortar 1:6 (1 cement : 6 coarse sand).

Quantity50.68

Rate18631

Amount 944236.82

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity98.17

Rate2133

Amount 209454.53

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :

Quantity-

Rate-

Amount -

Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity41.6

Rate16586

Amount 690016.29

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity46.76

Rate135

Amount 6340.19

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity0.53

Rate155505

Amount 82417.69

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood - 35 mm thick shutters

Quantity23.52

Rate5264

Amount 123819.86

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity23.52

Rate4274

Amount 100546.59

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):

Quantity-

Rate-

Amount -

12 mm thick

Quantity35.2

Rate1398

Amount 49212.77

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Quantity-

Rate-

Amount -

18 mm thick

Quantity19.2

Rate2282

Amount 43831.87

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity7.56

Rate6467

Amount 48896.04

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Quantity16

Rate5265

Amount 84244.64

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity7.56

Rate841

Amount 6359.85

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Quantity-

Rate-

Amount -

40 mm

Quantity4

Rate555

Amount 2220.68

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Quantity16

Rate133

Amount 2134.4

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Quantity16

Rate94

Amount 1504

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :

Quantity-

Rate-

Amount -

20 mm dia

Quantity16

Rate786

Amount 12582.88

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity12

Rate135

Amount 1623.48

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity8

Rate492

Amount 3938.4

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity60

Rate190

Amount 11418

150 x 10 mm

Quantity12

Rate158

Amount 1899.96

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity68

Rate111

Amount 7588.8

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity23.52

Rate6581

Amount 154785.36

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity19.8

Rate968

Amount 19181.65

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineer in-charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity4.86

Rate7266

Amount 35314.85

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity57.6

Rate2036

Amount 117281.66

STEEL WORK

Quantity-

Rate-

Amount -

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity376.8

Rate414

Amount 156119.54

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity110

Rate298

Amount 32804.2

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity20

Rate329

Amount 6587

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Quantity3.15

Rate19694

Amount 62038.05

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity20

Rate388

Amount 7762.8

ALUMINIUM WORK

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Quantity-

Rate-

Amount -

For fixed portion-Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity183.06

Rate977

Amount 178895.39

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Quantity-

Rate-

Amount -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity183.06

Rate1183

Amount 216686.29

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity37.68

Rate2137

Amount 80531.96

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity3

Rate311

Amount 933.69

Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

Quantity-

Rate-

Amount -

Upto 5 mm depth and 5 mm width

Quantity51.84

Rate272

Amount 14145.06

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix :

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity141.21

Rate616

Amount 87111.04

15mm plaster on rough side of single brick work

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity211.81

Rate710

Amount 150529.13

20 mm cement plaster of mix :

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity327.35

Rate841

Amount 275311.17

6 mm cement plaster of mix.

Quantity-

Rate-

Amount -

1:3 (1 cement : 3 fine sand)

Quantity259.74

Rate530

Amount 137747.91

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity8.84

Rate126

Amount 1121.8

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity8.84

Rate143

Amount 1270.04

Neat cement punning

Quantity40.72

Rate4

Amount 187.72

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity551.48

Rate259

Amount 143142.15

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity501.4

Rate349

Amount 175329.55

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity67.35

Rate401

Amount 27016.11

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity377.16

Rate254

Amount 96077.74

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.

Quantity-

Rate-

Amount -

New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.

Quantity119.15

Rate389

Amount 46358.88

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Quantity43.83

Rate116

Amount 5097.87

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity23.52

Rate128

Amount 3029.14

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity612.76

Rate135

Amount 82765.49

FLOORING WORK

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size

Quantity-

Rate-

Amount -

Size of Tile 600 x 600 mm

Quantity152.32

Rate2696

Amount 410717.17

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity9.05

Rate3073

Amount 27814.63

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity53.46

Rate3576

Amount 191206.64

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity3.22

Rate4272

Amount 13756.87

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity44.21

Rate1960

Amount 86686.53

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity100.55

Rate1966

Amount 197768.78

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity20

Rate1142

Amount 22843.8

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity8

Rate166

Amount 1332.96

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Quantity-

Rate-

Amount -

18 mm thick

Quantity5

Rate1196

Amount 5980.75

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity40

Rate670

Amount 26804.8

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler 110 mm

Quantity2

Rate251

Amount 502.78

Single tee without door 110x110x110 mm

Quantity2

Rate399

Amount 799.54

Bend 87.5° 110 mm bend

Quantity8

Rate276

Amount 2213.12

Shoe (Plain) 110 mm

Quantity8

Rate243

Amount 1944.08

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity25

Rate648

Amount 16215.75

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity8

Rate100

Amount 803.04

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity15

Rate545

Amount 8179.65

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity8

Rate558

Amount 4469.84

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity113.45

Rate1288

Amount 146224.57

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity6.63

Rate15740

Amount 104361.24

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

Quantity-

Rate-

Amount -

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Quantity5

Rate4084

Amount 20422.65

ROAD WORK

Quantity-

Rate-

Amount -

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Quantity65

Rate2119

Amount 137749.95

STONE WORK

Quantity-

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Quantity-

Rate-

Amount -

Granite stone slab of colour black,cherry/ruby red. Area of slab over 0.50 sq.m.

Quantity8.57

Rate10763

Amount 92246.11

DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity4

Rate11611

Amount 46446.72

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap

Quantity4

Rate6215

Amount 24860.8

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board

Quantity-

Rate-

Amount -

510x1040 mm bowl depth 250 mm

Quantity4

Rate12592

Amount 50369.2

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe 32 mm dia

Quantity8

Rate190

Amount 1524.88

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia Sand cast iron S&S pipe as per IS: 1729

Quantity40

Rate2133

Amount 85343.6

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity25

Rate342

Amount 8563.75

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity20

Rate646

Amount 12928.8

Providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes and fittings of diameter

Quantity-

Rate-

Amount -

100 mm

Quantity10

Rate1151

Amount 11519.4

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity6

Rate1112

Amount 6673.32

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate865

Amount 1730.9

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity8

Rate1075

Amount 8606.08

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm; Sand cast iron S & S as per IS - 1729

Quantity4

Rate1406

Amount 5626.72

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate1215

Amount 2431.94

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate2163

Amount 4327.54

Providing and fixing double unequal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X75X75 mm; Sand cast iron S & S as per IS - 1729

Quantity2

Rate1832

Amount 3665.7

Providing and fixing single unequal of junction required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75 mm; Sand cast iron S & S as per IS - 1729

Quantity2

Rate1743

Amount 3486.32

Providing and fixing sand cast iron S & S off sets as per IS : 1729.

Quantity-

Rate-

Amount -

152 mm off sets With100 mm dia pipe

Quantity2

Rate1396

Amount 2793.04

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity6

Rate823

Amount 4940.58

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity6

Rate837

Amount 5024.82

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet Sand cast iron S & S as per IS - 1729

Quantity8

Rate2941

Amount 23530.4

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity40

Rate145

Amount 5830.8

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity4

Rate429

Amount 1716

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity4

Rate1258

Amount 5032.76

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity4

Rate300

Amount 1201.28

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity4

Rate2957

Amount 11829.72

Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete

Quantity4

Rate1974

Amount 7898.12

SUBHEAD NO. 2 : WATER SUPPLY

Quantity-

Rate-

Amount -

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall

Quantity-

Rate-

Amount -

PN - 16 Pipe, 20mm OD (SDR-7.4)

Quantity10

Rate534

Amount 5343.2

PN - 16 Pipe, 25mm OD (SDR-7.4)

Quantity15

Rate662

Amount 9937.2

PN - 16 Pipe, 32mm OD (SDR-7.4)

Quantity20

Rate752

Amount 15043.4

PN - 16 Pipe, 40mm OD (SDR-7.4)

Quantity2

Rate1097

Amount 2194.68

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity15

Rate924

Amount 13868.1

20mm dia nominal bore

Quantity12

Rate1076

Amount 12920.4

25mm dia nominal bore

Quantity4

Rate1312

Amount 5248.2

32mm dia nominal bore

Quantity4

Rate1493

Amount 5975

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

External Work PN - 16 Pipe, 40 mm OD (SDR-7.4)

Quantity75

Rate878

Amount 65898.75

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity4

Rate1115

Amount 4462.72

32 mm nominal bore

Quantity2

Rate1236

Amount 2472.58

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity2

Rate636

Amount 1273.6

20mm nominal bore

Quantity2

Rate687

Amount 1374.6

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity1

Rate836

Amount 836.53

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore; vertical

Quantity1

Rate2198

Amount 2198.87

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity4

Rate348

Amount 1394.52

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity2

Rate3594

Amount 7189.1

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity1500

Rate20

Amount 30495

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity2

Rate174

Amount 348.1

Providing and fixing PTMT grating of approved quality and colour.Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity4

Rate69

Amount 278.32

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity8

Rate909

Amount 7279.84

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity4

Rate1498

Amount 5994.32

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity8

Rate1246

Amount 9971.68

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity8

Rate1048

Amount 8388.96

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Quantity4

Rate360

Amount 1440.2

SUBHEAD NO. 3 : DRAINAGE

Quantity-

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity40

Rate1239

Amount 49577.6

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity1

Rate2295

Amount 2295.17

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity39

Rate1445

Amount 56376.84

Providing and laying non - Pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand) including testing of joints etc. complete:

Quantity-

Rate-

Amount -

250 mm dia R.C.C. pipe

Quantity2

Rate1699

Amount 3399.96

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity40

Rate874

Amount 34986.4

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

150X100 mm size P type; With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity2

Rate5185

Amount 10371.52

180 X 150 mm size P type; With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate5310

Amount 5310.67

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.):

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity8

Rate24493

Amount 195947.2

Extra for depth for manholes; Size 90 X 80 cm

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity1

Rate17033

Amount 17033.22

Providing and fixing in position pre-cast RCC manhole cover and frame of required size and of approved quality. MD-10

Quantity-

Rate-

Amount -

Circular shape 500mm inner dia.

Quantity3

Rate2214

Amount 6643.47

Constructing brick masonary road gully chamber 50X45X60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500X450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design:

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity2

Rate11714

Amount 23428.34

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate58742

Amount 58742.49

DSR-INTERNAL AND EXTERNAL CIVIL WORKS

Quantity-

Rate-

Amount -

WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group B

Quantity75

Rate2477

Amount 185790

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity420

Rate488

Amount 205090.2

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity150

Rate576

Amount 86451

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity10

Rate699

Amount 6999.9

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Quantity40

Rate920

Amount 36802

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity16

Rate215

Amount 3453.92

3 pin 5/6 amp socket outlet

Quantity16

Rate255

Amount 4090.88

Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.

Quantity4

Rate207

Amount 829.92

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity16

Rate773

Amount 12373.44

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity20

Rate83

Amount 1676.6

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required.

Quantity45

Rate999

Amount 44985.6

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity12

Rate1228

Amount 14737.44

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity8

Rate943

Amount 7544.72

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,single pole and neutral,sheet steel MCB distribution board, 240 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

8 way, Double door

Quantity4

Rate5392

Amount 21569.6

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity1

Rate8573

Amount 8573.77

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity24

Rate536

Amount 12876.24

Double pole

Quantity4

Rate1374

Amount 5499.28

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

63 amps

Quantity1

Rate2167

Amount 2167.02

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity1

Rate563

Amount 563.76

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity4

Rate15659

Amount 62638.24

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosurewith cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity-

Rate-

Amount -

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity5

Rate106

Amount 534.4

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity50

Rate2037

Amount 101854

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity4

Rate1085

Amount 4342.44

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity75

Rate264

Amount 19805.25

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity20

Rate412

Amount 8257.4

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity2

Rate253

Amount 507.16

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity1

Rate12712

Amount 12712.91

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity70

Rate811

Amount 56774.2

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity2

Rate502

Amount 1005.98

4 X 16 sq. mm (28mm)

Quantity2

Rate647

Amount 1295.2

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity35

Rate431

Amount 15110.55

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity2

Rate987

Amount 1974.22

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity16

Rate446

Amount 7142.24

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity8

Rate433

Amount 3470.64

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity4

Rate3784

Amount 15139.84

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100 mm dia

Quantity2

Rate1387

Amount 2774.8

150 mm dia

Quantity2

Rate1517

Amount 3034.68

CONSTRUCTION OF 2 NOS SINGLE OFFICER ACCOMMODATION (G) WITH ALLIED SERVICES AND DEVELOPMENT WORKS FOR ASSAM RIFLES BATTILION AT PHELUNGRE, NAGALAND

Quantity-

Rate-

Amount -

DSR-CIVIL WORKS

Quantity-

Rate-

Amount -

EARTH WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity269.36

Rate430

Amount 115978.34

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity73.99

Rate219

Amount 16204.55

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity206.5

Rate532

Amount 109903.43

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity32.05

Rate4529

Amount 145166.31

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity4.8

Rate421

Amount 2020.99

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.

Quantity-

Rate-

Amount -

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity63.98

Rate93

Amount 5993.65

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity79.15

Rate536

Amount 42490.09

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity11.37

Rate15145

Amount 172209.79

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity7.09

Rate13979

Amount 99113.02

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity1

Rate13257

Amount 13257.91

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity14.72

Rate947

Amount 13951.76

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity19.06

Rate119

Amount 2282.82

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity14.72

Rate238

Amount 3512.34

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity27.29

Rate1428

Amount 38985.95

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity34.82

Rate16760

Amount 583599.22

All works above plinth level upto floor V level

Quantity-

Rate-

Amount -

Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity44.12

Rate21125

Amount 932062.35

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity2.76

Rate1442

Amount 3982.21

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity86.75

Rate645

Amount 55987.58

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity3.04

Rate1403

Amount 4265.79

Suspended floors, roofs, landings, balconies and access platform.

Quantity146.29

Rate1606

Amount 235016.35

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity213.08

Rate1274

Amount 271666.35

Columns, pillars, piers, abutments, posts and struts.

Quantity235.76

Rate1685

Amount 397378.2

Stairs (excluding landings) except spiral staircases.

Quantity133.17

Rate1378

Amount 183573.51

Weather shade, Chajjas, corbels etc., including edges

Quantity9.8

Rate1707

Amount 16737.81

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity1652.33

Rate187

Amount 310439.76

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity4304.29

Rate187

Amount 808690.01

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity15.85

Rate14423

Amount 228605.34

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement Mortar 1:6 (1 cement : 6 coarse sand).

Quantity15.71

Rate18631

Amount 292698.51

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity31.91

Rate2133

Amount 68082.86

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity0.21

Rate155505

Amount 32656.07

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood-35 mm thick shutters

Quantity11.76

Rate5264

Amount 61909.93

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity11.76

Rate4274

Amount 50273.29

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity3.78

Rate6467

Amount 24448.02

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Quantity8

Rate5265

Amount 42122.32

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Quantity-

Rate-

Amount -

40 mm

Quantity2

Rate555

Amount 1110.34

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Quantity2

Rate133

Amount 266.8

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Quantity4

Rate94

Amount 376

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity6

Rate135

Amount 811.74

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity2

Rate492

Amount 984.6

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity18

Rate190

Amount 3425.4

150 x 10 mm

Quantity6

Rate158

Amount 949.98

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity18

Rate111

Amount 2008.8

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity11.76

Rate6581

Amount 77392.68

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity19.8

Rate968

Amount 19181.65

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineerin-charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity4.86

Rate7266

Amount 35314.85

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity18.8

Rate2036

Amount 38279.43

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity113.04

Rate414

Amount 46835.86

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity25

Rate298

Amount 7455.5

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity10

Rate329

Amount 3293.5

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity4

Rate388

Amount 1552.56

ALUMINIUM WORK

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Quantity-

Rate-

Amount -

For fixed portion

Quantity-

Rate-

Amount -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity69.16

Rate977

Amount 67586.61

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Quantity-

Rate-

Amount -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity69.16

Rate1183

Amount 81864

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity18.84

Rate2137

Amount 40265.98

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity1.5

Rate311

Amount 466.85

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix :

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity103.07

Rate616

Amount 63582.85

15mm plaster on rough side of single brick work

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity146.88

Rate710

Amount 104384.68

20 mm cement plaster of mix :

Quantity-

Rate-

Amount -

1:6 (1 cement : 6 coarse sand)

Quantity152.23

Rate841

Amount 128030

6 mm cement plaster of mix.

Quantity-

Rate-

Amount -

1:3 (1 cement : 3 fine sand)

Quantity120.97

Rate530

Amount 64154.02

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity8.84

Rate126

Amount 1121.8

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity8.84

Rate143

Amount 1270.04

Neat cement punning

Quantity40.72

Rate4

Amount 187.72

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity340.79

Rate259

Amount 88455.45

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity284.49

Rate349

Amount 99480.46

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity52.01

Rate401

Amount 20862.77

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity198.63

Rate254

Amount 50599.01

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.

Quantity-

Rate-

Amount -

New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.

Quantity107.23

Rate389

Amount 41721.05

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Quantity28.49

Rate116

Amount 3313.67

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity23.52

Rate128

Amount 3029.14

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity113.6

Rate135

Amount 15343.95

FLOORING WORK

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size

Quantity-

Rate-

Amount -

Size of Tile 600 x 600 mm

Quantity76.16

Rate2696

Amount 205358.59

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity9.05

Rate3073

Amount 27814.63

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity36

Rate3576

Amount 128758.68

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity3.22

Rate4272

Amount 13756.87

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity39.78

Rate1960

Amount 78000.23

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity100.55

Rate1966

Amount 197768.78

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity20

Rate1142

Amount 22843.8

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity8

Rate166

Amount 1332.96

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Quantity-

Rate-

Amount -

18 mm thick

Quantity5

Rate1196

Amount 5980.75

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity20

Rate670

Amount 13402.4

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler 110 mm

Quantity2

Rate251

Amount 502.78

Single tee without door

Quantity2

Rate399

Amount 799.54

110x110x110 mm Bend 87.5°

Quantity8

Rate276

Amount 2213.12

Shoe (Plain) 110 mm

Quantity8

Rate243

Amount 1944.08

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity25

Rate648

Amount 16215.75

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity8

Rate100

Amount 803.04

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity15

Rate545

Amount 8179.65

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity8

Rate558

Amount 4469.84

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity132.6

Rate1288

Amount 170906.81

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity6.63

Rate15740

Amount 104361.24

stone work

Quantity-

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Quantity-

Rate-

Amount -

Granite stone slab of colour black,cherry/ruby red. Area of slab over 0.50 sq.m.

Quantity4

Rate10763

Amount 43055.36

SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity2

Rate11611

Amount 23223.36

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap

Quantity2

Rate6215

Amount 12430.4

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

17.10.1 Kitchen sink with drain board

Quantity-

Rate-

Amount -

510x1040 mm bowl depth 250 mm

Quantity2

Rate12592

Amount 25184.6

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe

Quantity-

Rate-

Amount -

32 mm dia

Quantity4

Rate190

Amount 762.44

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia Sand cast iron S&S pipe as per IS: 1729

Quantity15

Rate2133

Amount 32003.85

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity10

Rate342

Amount 3425.5

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity2

Rate646

Amount 1292.88

Providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes and fittings of diameter

Quantity-

Rate-

Amount -

100 mm

Quantity4

Rate1151

Amount 4607.76

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity4

Rate1112

Amount 4448.88

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate865

Amount 1730.9

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity4

Rate1075

Amount 4303.04

Providing and fixing double equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1804

Amount 1804.87

75X75X75X75 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1310

Amount 1310.27

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1406

Amount 1406.68

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1215

Amount 1215.97

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate2163

Amount 2163.77

Providing and fixing double unequal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X75X75 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1832

Amount 1832.85

Providing and fixing single unequal of junction required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75 mm Sand cast iron S & S as per IS - 1729

Quantity1

Rate1743

Amount 1743.16

Providing and fixing sand cast iron S & S off sets as per IS : 1729.

Quantity-

Rate-

Amount -

152 mm off sets With100 mm dia pipe

Quantity1

Rate1396

Amount 1396.52

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate823

Amount 1646.86

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm Sand cast iron S & S as per IS - 1729

Quantity2

Rate837

Amount 1674.94

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet Sand cast iron S & S as per IS - 1729

Quantity4

Rate2941

Amount 11765.2

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity15

Rate145

Amount 2186.55

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity2

Rate429

Amount 858

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity2

Rate1258

Amount 2516.38

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity2

Rate300

Amount 600.64

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity2

Rate2957

Amount 5914.86

SUBHEAD NO. 2 : WATER SUPPLY

Quantity-

Rate-

Amount -

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall

Quantity-

Rate-

Amount -

PN - 16 Pipe, 20mm OD (SDR-7.4)

Quantity10

Rate534

Amount 5343.2

PN - 16 Pipe, 25mm OD (SDR-7.4)

Quantity10

Rate662

Amount 6624.8

PN - 16 Pipe, 32mm OD (SDR-7.4)

Quantity10

Rate752

Amount 7521.7

PN - 16 Pipe, 40mm OD (SDR-7.4)

Quantity2

Rate1097

Amount 2194.68

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity8

Rate924

Amount 7396.32

20mm dia nominal bore

Quantity6

Rate1076

Amount 6460.2

25mm dia nominal bore

Quantity2

Rate1312

Amount 2624.1

32mm dia nominal bore

Quantity2

Rate1493

Amount 2987.5

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work

Quantity-

Rate-

Amount -

PN - 16 Pipe, 40 mm OD (SDR-7.4)

Quantity20

Rate878

Amount 17573

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity2

Rate1115

Amount 2231.36

32 mm nominal bore

Quantity1

Rate1236

Amount 1236.29

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity1

Rate636

Amount 636.8

20mm nominal bore

Quantity1

Rate687

Amount 687.3

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity1

Rate836

Amount 836.53

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore; vertical

Quantity1

Rate2198

Amount 2198.87

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity2

Rate348

Amount 697.26

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity500

Rate20

Amount 10165

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity1

Rate174

Amount 174.05

Providing and fixing PTMT grating of approved quality and colour. Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity2

Rate69

Amount 139.16

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity4

Rate909

Amount 3639.92

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1498

Amount 2997.16

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity4

Rate1246

Amount 4985.84

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity4

Rate1048

Amount 4194.48

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Quantity2

Rate360

Amount 720.1

SUBHEAD NO. 3 : DRAINAGE

Quantity-

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity22

Rate1239

Amount 27267.68

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity22

Rate1445

Amount 31802.32

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity22

Rate874

Amount 19242.52

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

150X100 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity2

Rate5185

Amount 10371.52

180 X 150 mm size P type

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate5310

Amount 5310.67

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.):

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity6

Rate24493

Amount 146960.4

Extra for depth for manholes, Size 90 X 80 cm

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity1

Rate17033

Amount 17033.22

Providing and fixing in position pre-cast RCC manhole cover and frame of required size and of approved quality.

Quantity-

Rate-

Amount -

MD-10 Circular shape 500mm inner dia.

Quantity2

Rate2214

Amount 4428.98

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate58742

Amount 58742.49

DSR-INTERNAL AND EXTERNAL ELECTRICAL WORKS.

Quantity-

Rate-

Amount -

WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group B

Quantity37

Rate2477

Amount 91656.4

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity200

Rate488

Amount 97662

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity75

Rate576

Amount 43225.5

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity8

Rate699

Amount 5599.92

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Quantity20

Rate920

Amount 18401

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity8

Rate215

Amount 1726.96

3 pin 5/6 amp socket outlet

Quantity8

Rate255

Amount 2045.44

Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.

Quantity2

Rate207

Amount 414.96

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity8

Rate773

Amount 6186.72

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity10

Rate83

Amount 838.3

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required.

Quantity22

Rate999

Amount 21992.96

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity6

Rate1228

Amount 7368.72

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity4

Rate943

Amount 3772.36

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,single pole and neutral,sheet steel MCB distribution board, 240 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

8 way, Double door

Quantity2

Rate5392

Amount 10784.8

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity1

Rate8573

Amount 8573.77

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity12

Rate536

Amount 6438.12

Double pole

Quantity2

Rate1374

Amount 2749.64

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

63 amps

Quantity1

Rate2167

Amount 2167.02

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity1

Rate563

Amount 563.76

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity4

Rate15659

Amount 62638.24

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity5

Rate106

Amount 534.4

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity25

Rate2037

Amount 50927

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity4

Rate1085

Amount 4342.44

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity75

Rate264

Amount 19805.25

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity15

Rate412

Amount 6193.05

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity2

Rate253

Amount 507.16

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity1

Rate12712

Amount 12712.91

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity70

Rate811

Amount 56774.2

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity2

Rate502

Amount 1005.98

4 X 10 sq. mm (25mm)

Quantity2

Rate563

Amount 1127.52

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity16

Rate431

Amount 6907.68

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity2

Rate987

Amount 1974.22

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity8

Rate446

Amount 3571.12

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity4

Rate433

Amount 1735.32

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity2

Rate3784

Amount 7569.92

NON-SCHEDULE ITEMS

Quantity-

Rate-

Amount -

Construction of 2 No. Type V Qtr (G+1) with allied Service and development works for Assam Rifles Battalion at Phelungre (Ngaland).

Quantity-

Rate-

Amount -

P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:

Quantity-

Rate-

Amount -

0-500v, analog voltmeter with VSS control fuse-1set; LED indicating lamp-3nos, MAKE: AE/L&T

Quantity1

Rate4666

Amount 4666.99

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity1

Rate16556

Amount 16556

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity1

Rate3580

Amount 3580

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity1

Rate5350

Amount 5350

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity1

Rate890

Amount 890

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2C X 6 sq. mm

Quantity25

Rate234

Amount 5850.25

4 X 16 sq. mm (28mm)

Quantity50

Rate437

Amount 21850

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity43

Rate1062

Amount 45666

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.

Quantity8

Rate2456

Amount 19648

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.

Quantity8

Rate2022

Amount 16176

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity8

Rate2457

Amount 19656

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity2

Rate3670

Amount 7340

1400mm(56") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity10

Rate3880

Amount 38800.1

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity10

Rate2109

Amount 21090

Supply of Al Louver for 230 mm exhaust fan

Quantity10

Rate200

Amount 2000

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity5

Rate1500

Amount 7500

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Quantity-

Rate-

Amount -

40 A 4P MCB

Quantity2

Rate3519

Amount 7038

40 A TP MCB

Quantity3

Rate2863

Amount 8589

CONSTRUCTION OF 4 NOS SINGLE OFFICER ACCOMMODATION (G+I) WITH ALLIED SERVICES AND DEVELOPMENT WORKS FOR ASSAM RIFLES BATTILION AT PHELUNGRE, NAGALAND

Quantity-

Rate-

Amount -

P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:

Quantity-

Rate-

Amount -

0-500v, analog voltmeter with VSS control fuse-1set; LED indicating lamp-3nos, MAKE: AE/L&T

Quantity1

Rate4668

Amount 4668.64

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity1

Rate16556

Amount 16556

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity1

Rate3580

Amount 3580

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity1

Rate6272

Amount 6272

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity1

Rate890

Amount 890

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2C X 6 sq. mm

Quantity20

Rate234

Amount 4680.2

4 X 16 sq. mm (28mm)

Quantity50

Rate365

Amount 18250

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity32

Rate1062

Amount 33984

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.

Quantity4

Rate2456

Amount 9824

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.

Quantity4

Rate2022

Amount 8088

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity7

Rate2456

Amount 17192

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity16

Rate3670

Amount 58720

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity8

Rate2109

Amount 16872

Supply of Al Louver for 230 mm exhaust fan

Quantity8

Rate200

Amount 1600

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity7

Rate1500

Amount 10500

CONSTRUCTION OF 2 NOS SINGLE OFFICER ACCOMMODATION (G) WITH ALLIED SERVICES AND DEVELOPMENT WORKS FOR ASSAM RIFLES BATTILION AT PHELUNGRE, NAGALAND

Quantity-

Rate-

Amount -

P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:

Quantity-

Rate-

Amount -

0-500v, analog voltmeter with VSS control fuse-1set; LED indicating lamp-3nos; MAKE: AE/L&T

Quantity1

Rate4666

Amount 4666.99

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity1

Rate16556

Amount 16556

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity1

Rate3580

Amount 3580

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity1

Rate5350

Amount 5350

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity1

Rate890

Amount 890

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2C X 6 sq. mm

Quantity18

Rate234

Amount 4212.18

4 X 10 sq. mm (25mm)

Quantity40

Rate365

Amount 14600

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity16

Rate1062

Amount 16992

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.

Quantity2

Rate2045

Amount 4090

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.

Quantity2

Rate2022

Amount 4044

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity7

Rate2045

Amount 14315

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity8

Rate3069

Amount 24559.92

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity4

Rate2109

Amount 8436

Supply of Al Louver for 230 mm exhaust fan

Quantity4

Rate200

Amount 800

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity7

Rate1500

Amount 10500

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.