Bridge And Roof Company India Limited Tender

View complete overview of Nagaland Bridge And Roof Company India Limited Tender

Bridge And Roof Company India Limited Tender

Works

Civil And Construction

Building Construction

Eprocure

Kohima, Nagaland

Opening Date10 Jan 2025

Closing Soon31 Jan 2025

Tender Amount₹ 4,34,07,620

Email

Download

Costs

EMD
₹ 8,69,000
Document Cost
₹ 10,266
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2025_BandR_843831_1
Tender No
B AND R/GO/51256/AR /NIT/CIVIL/P-07/01
Tender Authority
Bridge And Roof Company India Limited View
Purchaser Address
-
Website
http://eprocure.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-23.0 MBeNIT-Const-3-SMB-P...eNIT-Const-3-SMB-Pkg-07-Kohima.pdf

eNIT-Const-3-SMB-Pkg-07-Kohima.pdf

Tender Notice-11.4 MBTendernotice_1.pdf

eNotice-NIT-Const-3-SMB-Pkg-07-Kohima.pdf

BOQ-1778.8 kBBOQ_886963.xls

BOQ-Package07

Document-161.1 MB3 STORIED SINGLEME...3 STORIED SINGLEMEN BARRACK (G+II) FOR HQ IGAR(N) AT KOHIMA ELECTRICAL 01.pdf

Document-15824.3 kBMake-List.pdf

Make List

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m

Quantity-

Rate-

Amount -

All kinds of soil

Quantity255.2

Rate45

Amount 11711.13

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity749.64

Rate334

Amount 251046.94

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity194.46

Rate170

Amount 33124.32

Ordinary or hard rock

Quantity10

Rate305

Amount 3054.7

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity502.31

Rate413

Amount 207931.22

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity64.16

Rate3522

Amount 226025.41

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity8.8

Rate327

Amount 2881.74

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Quantity-

Rate-

Amount -

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity117.31

Rate72

Amount 8547.21

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity142.57

Rate417

Amount 59527.25

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity39.08

Rate11780

Amount 460370.61

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity6.47

Rate10872

Amount 70346.82

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity5

Rate10311

Amount 51558.55

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity53.96

Rate737

Amount 39778.77

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity13

Rate93

Amount 1211.08

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity53.96

Rate185

Amount 10013.9

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity60.67

Rate1111

Amount 67411.65

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity107.82

Rate13035

Amount 1405531.82

All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity289.27

Rate16431

Amount 4753006.94

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity11.99

Rate1122

Amount 13455.18

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity45.36

Rate501

Amount 22769.36

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity660

Rate1091

Amount 720317.4

Suspended floors, roofs, landings, balconies and access platform.

Quantity1201.48

Rate1249

Amount 1501261.27

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity966.04

Rate991

Amount 957954.25

Columns, pillars, piers, abutments, posts and struts.

Quantity574.88

Rate1310

Amount 753644.68

Stairs (excluding landings) except spiral staircases.

Quantity200.02

Rate1072

Amount 214453.44

Weather shade, Chajjas, corbels etc., including edges

Quantity40.96

Rate1328

Amount 54411.26

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity15556.83

Rate146

Amount 2273319.57

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity55522.17

Rate146

Amount 8113454.7

BRICK WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity84.14

Rate11217

Amount 943876.63

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement Mortar 1:6 (1 cement : 6 coarse sand).

Quantity241.23

Rate13510

Amount 3259096.91

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity312.54

Rate1659

Amount 518647.63

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Quantity150.45

Rate140

Amount 21201.41

Coursed rubble masonry (first sort) with hard stone in foundation andplinth with :

Quantity-

Rate-

Amount -

Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity12.5

Rate12900

Amount 161261.75

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity257.7

Rate105

Amount 27177.04

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity1.16

Rate120948

Amount 140300.14

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters

Quantity36.54

Rate4094

Amount 149615.95

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity36.54

Rate3324

Amount 121493.67

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity2

Rate5030

Amount 10060.92

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity2

Rate654

Amount 1308.6

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Twin rubber stopper)

Quantity18

Rate101

Amount 1826.46

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity84

Rate382

Amount 32163.6

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity14

Rate148

Amount 2072.14

150 x 10 mm

Quantity24

Rate123

Amount 2955.6

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity84

Rate86

Amount 7291.2

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of pproved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid eparately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Quantity-

Rate-

Amount -

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Quantity64.8

Rate16349

Amount 1059465.74

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).

Quantity5.4

Rate12748

Amount 68843.41

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Quantity32.4

Rate15717

Amount 509257.04

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Quantity-

Rate-

Amount -

Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Quantity7.2

Rate17023

Amount 122570.78

Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

Quantity14.4

Rate15706

Amount 226167.55

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity97.2

Rate5118

Amount 497525

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity119.88

Rate1583

Amount 189849.16

STEEL WORK

Quantity-

Rate-

Amount -

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity2667.48

Rate322

Amount 859622.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity472.03

Rate231

Amount 109487.36

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity344.52

Rate256

Amount 88252.24

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Quantity3.6

Rate15318

Amount 55144.98

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Quantity90

Rate997

Amount 89819.1

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity66

Rate301

Amount 19924.08

Providing and fixing glazing in aluminium/ UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity102.6

Rate1662

Amount 170553.01

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity17.28

Rate242

Amount 4182.8

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity618.95

Rate479

Amount 296972.21

15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)

Quantity969.22

Rate552

Amount 535736.36

20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity864.39

Rate654

Amount 565501.23

6 mm cement plaster of mix. 1:3 (1 cement : 3 fine sand)

Quantity805.88

Rate412

Amount 332409.38

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity12.68

Rate98

Amount 1251.52

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity19.03

Rate111

Amount 2126.41

Neat cement punning

Quantity137.92

Rate110

Amount 15242.92

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity2394.05

Rate201

Amount 483310.81

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity698.43

Rate271

Amount 189952.01

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity156.42

Rate311

Amount 48801.48

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity1381.42

Rate198

Amount 273700.74

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity600

Rate146

Amount 88074

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Quantity119.88

Rate90

Amount 10845.54

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity36.54

Rate100

Amount 3660.21

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity2394.05

Rate105

Amount 251518.89

FLOORING WORK

Quantity-

Rate-

Amount -

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity30

Rate1529

Amount 45893.7

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity687.96

Rate2781

Amount 1913780.89

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity192.05

Rate3322

Amount 638166.79

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity213.72

Rate1525

Amount 325935.82

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity224.77

Rate1529

Amount 343850.9

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity5

Rate888

Amount 4441.85

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity8

Rate129

Amount 1036.72

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Quantity-

Rate-

Amount -

18 mm thick

Quantity5

Rate930

Amount 4651.7

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity200

Rate521

Amount 104240

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler: 110 mm

Quantity60

Rate195

Amount 11731.2

Single tee without door: 110x110x110 mm

Quantity10

Rate310

Amount 3109.3

Bend 87.5°: 110 mm bend

Quantity10

Rate215

Amount 2151.7

Shoe (Plain): 110 mm

Quantity10

Rate189

Amount 1890

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity80

Rate504

Amount 40360

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity20

Rate78

Amount 1561.6

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity101.2

Rate424

Amount 42922.97

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity10

Rate434

Amount 4345.7

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity19.14

Rate12242

Amount 234327.38

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity255.2

Rate1002

Amount 255830.34

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Quantity-

Rate-

Amount -

For vertical surface two coats @ 0.70 kg per sqm

Quantity23.78

Rate662

Amount 15747.12

For horizontal surface one coat @1.10 kg per sqm.

Quantity55.15

Rate507

Amount 28002.96

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity122.4

Rate753

Amount 92227.18

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineerin- charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity36.45

Rate5651

Amount 206003.37

ROAD WORK

Quantity-

Rate-

Amount -

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Quantity50

Rate294

Amount 14711

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Quantity4

Rate14040

Amount 56161.68

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Quantity50

Rate1648

Amount 82415

DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:

Quantity-

Rate-

Amount -

White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.

Quantity6

Rate9423

Amount 56542.98

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity6

Rate9031

Amount 54187.86

Providing and fixing white vitreous china flat back half stall urinal of size 580X380X350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Quantity6

Rate24638

Amount 147832.14

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps

Quantity12

Rate4452

Amount 53428.44

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe: 32 mm dia

Quantity12

Rate148

Amount 1779

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia: Sand cast iron S&S pipe as per IS: 1729

Quantity162

Rate1659

Amount 268832.52

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity90

Rate266

Amount 23978.7

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity50

Rate502

Amount 25139.5

Providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes and fittings of diameter

Quantity-

Rate-

Amount -

100 mm

Quantity96

Rate895

Amount 86011.2

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity10

Rate865

Amount 8650.6

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity2

Rate673

Amount 1346.24

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate836

Amount 6693.6

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

Quantity-

Rate-

Amount -

100X100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity12

Rate1693

Amount 20318.4

Providing and fixing double equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity1

Rate1403

Amount 1403.79

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity12

Rate1094

Amount 13128.96

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity24

Rate945

Amount 22698

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm: Sand cast iron S & S as per IS - 1729

Quantity6

Rate1682

Amount 10097.58

Providing and fixing double unequal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X75X75 mm: Sand cast iron S & S as per IS - 1729

Quantity6

Rate1425

Amount 8553.3

Providing and fixing single unequal of junction required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75 mm: Sand cast iron S & S as per IS - 1729

Quantity6

Rate1355

Amount 8134.68

Providing and fixing single unequal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X75 mm: Sand cast iron S & S as per IS - 1729

Quantity2

Rate1207

Amount 2414.9

Providing and fixing double equal plain invert branch of required degree:

Quantity-

Rate-

Amount -

100X100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity6

Rate1261

Amount 7571.88

Providing and fixing single equal plain invert branch of required degree:

Quantity-

Rate-

Amount -

Sand cast iron S & S as per IS - 1729

Quantity2

Rate1011

Amount 2022.38

Providing and fixing double unequal invert branch of required degree:

Quantity-

Rate-

Amount -

100X100X75X75mm:Sand cast iron S & S as per IS - 1729

Quantity2

Rate1371

Amount 2742.06

Providing and fixing single unequal plain invert branch of required degree:

Quantity-

Rate-

Amount -

100X100X75 mm: Sand cast iron S & S as per IS - 1729

Quantity2

Rate1152

Amount 2305.86

Providing and fixing sand cast iron S & S off sets as per IS : 1729.

Quantity-

Rate-

Amount -

76 mm off sets: With 75 mm dia pipe

Quantity1

Rate529

Amount 529.68

152 mm off sets: With100 mm dia pipe

Quantity1

Rate1086

Amount 1086.18

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate640

Amount 5123.52

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate651

Amount 5210.88

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet: Sand cast iron S & S as per IS - 1729

Quantity36

Rate2287

Amount 82356.48

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity162

Rate113

Amount 18365.94

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity12

Rate333

Amount 4004.04

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity12

Rate978

Amount 11743.08

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity24

Rate238

Amount 5723.28

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity12

Rate2300

Amount 27602.76

Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete

Quantity12

Rate1535

Amount 18428.88

SUBHEAD NO. 2 : WATER SUPPLY

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal Work: Exposed on wall)

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity2

Rate417

Amount 834.26

20mm dia nominal bore

Quantity2

Rate529

Amount 1059.86

25mm dia nominal bore

Quantity5

Rate665

Amount 3329.75

32 mm dia. Nominal bore

Quantity84

Rate816

Amount 68591.88

40 mm dia. Nominal bore

Quantity2

Rate1099

Amount 2198.44

50mm dia nominal bore

Quantity45

Rate1511

Amount 67997.25

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. (Internal Exposed on walls)

Quantity-

Rate-

Amount -

PN - 16 Pipe, 20mm OD (SDR-7.4)

Quantity5

Rate415

Amount 2077.9

PN - 16 Pipe, 25mm OD (SDR-7.4)

Quantity7

Rate515

Amount 3606.82

PN - 16 Pipe, 32mm OD (SDR-7.4)

Quantity8

Rate585

Amount 4680.16

PN - 16 Pipe, 40mm OD (SDR-7.4)

Quantity10

Rate853

Amount 8534.9

PN - 10 Pipe, 50mm OD (SDR-11)

Quantity11

Rate1086

Amount 11953.37

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity55

Rate719

Amount 39549.95

20mm dia nominal bore

Quantity28

Rate837

Amount 23448.04

25mm dia nominal bore

Quantity15

Rate1020

Amount 15307.35

32 mm dia. Nominal bore

Quantity15

Rate1161

Amount 17427.15

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.(External Work)

Quantity-

Rate-

Amount -

PN - 16 Pipe, 40 mm OD (SDR-7.4)

Quantity50

Rate683

Amount 34169.5

PN - 10 Pipe, 50 mm OD (SDR-11)

Quantity25

Rate926

Amount 23171

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External Work)

Quantity-

Rate-

Amount -

40 mm dia. Nominal bore

Quantity20

Rate911

Amount 18230.4

50 mm dia. Nominal bore

Quantity100

Rate1323

Amount 132335

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity1

Rate867

Amount 867.75

32 mm nominal bore

Quantity12

Rate961

Amount 11538.72

40mm nominal bore

Quantity1

Rate1152

Amount 1152.93

50 mm nominal bore

Quantity4

Rate1431

Amount 5726.32

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity1

Rate495

Amount 495.29

20mm nominal bore

Quantity1

Rate534

Amount 534.57

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity2

Rate650

Amount 1301.26

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore: Vertical

Quantity1

Rate1710

Amount 1710.24

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity12

Rate271

Amount 3253.92

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity1

Rate2790

Amount 2790.87

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity5000

Rate15

Amount 79050

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity2

Rate157

Amount 314.44

Providing and fixing PTMT grating of approved quality and colour. :Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity30

Rate54

Amount 1623.6

125 mm nominal dia with 25 mm waste hole

Quantity6

Rate73

Amount 442.56

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity24

Rate707

Amount 16986.24

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity24

Rate969

Amount 23267.28

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity30

Rate815

Amount 24467.7

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Quantity1

Rate614

Amount 614.69

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Quantity24

Rate280

Amount 6720.96

SUBHEAD NO. 3 : DRAINAGE

Quantity-

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity100

Rate964

Amount 96401

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity100

Rate1124

Amount 112432

Providing and laying non - Pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement:2 fine sand) including testing of joints etc. complete:

Quantity-

Rate-

Amount -

250 mm dia R.C.C. pipe

Quantity5

Rate1322

Amount 6611.05

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity105

Rate680

Amount 71431.5

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

150X100 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate4033

Amount 4033.37

180 X 150 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity2

Rate4130

Amount 8261.04

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.

Quantity-

Rate-

Amount -

Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity14

Rate19050

Amount 266706.02

Extra for depth for manholes: Size 90 X 80 cm

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity1

Rate13248

Amount 13248.06

Providing and fixing in position pre-cast RCC manhole cover and frame of required size and of approved quality.

Quantity-

Rate-

Amount -

MD-10: Circular shape 500mm inner dia.

Quantity3

Rate1722

Amount 5167.14

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity2

Rate45688

Amount 91377.2

DSR-INTERNAL AND EXTERNAL ELECTRICAL SYSTEM

Quantity-

Rate-

Amount -

WIRING: WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group B

Quantity69

Rate1926

Amount 132942.99

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity1260

Rate379

Amount 478548

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity120

Rate448

Amount 53791.2

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity15

Rate544

Amount 8166.45

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Quantity120

Rate875

Amount 105039.6

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity21

Rate167

Amount 3525.69

3 pin 5/6 amp socket outlet

Quantity21

Rate198

Amount 4176.06

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity36

Rate601

Amount 21653.28

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity30

Rate65

Amount 1956

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Quantity132

Rate777

Amount 102633.96

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity6

Rate955

Amount 5731.2

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity12

Rate733

Amount 8802.24

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity6

Rate6668

Amount 40010.94

Supplying and fixing following ways surface/recess mounting vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, dully powder painted, inclusive of 200 A tinned copper bus bar,common neutral link,earth bar,din bar for mpunting MCBs (but without MCBs and incomer) as required,(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Quantity-

Rate-

Amount -

8 way (4 + 24), Double door

Quantity1

Rate16569

Amount 16569.35

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity81

Rate417

Amount 33800.49

Tripple pole

Quantity21

Rate1641

Amount 34470.45

Tripple pole & Neutral

Quantity6

Rate2001

Amount 12010.14

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

63 amps

Quantity1

Rate1685

Amount 1685.46

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity1

Rate438

Amount 438.48

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity4

Rate12179

Amount 48718.6

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity-

Rate-

Amount -

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity5

Rate83

Amount 415.65

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity25

Rate1584

Amount 39610

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity6

Rate844

Amount 5066.16

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity100

Rate205

Amount 20538

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity20

Rate321

Amount 6422.4

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity2

Rate197

Amount 394.46

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity1

Rate9887

Amount 9887.82

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity75

Rate630

Amount 47312.25

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity2

Rate391

Amount 782.42

4 X 16 sq. mm (28mm)

Quantity2

Rate503

Amount 1007.36

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity111

Rate335

Amount 37272.69

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity6

Rate767

Amount 4606.5

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity36

Rate347

Amount 12499.2

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity12

Rate337

Amount 4049.04

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity5

Rate2943

Amount 14719.25

150 mm dia

Quantity5

Rate4466

Amount 22331.55

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100 mm dia

Quantity5

Rate1079

Amount 5395.45

150 mm dia

Quantity5

Rate1180

Amount 5900.75

P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following: 0-500v, analog voltmeter with VSS control fuse-1set

Quantity-

Rate-

Amount -

LED indicating lamp-3nos (MAKE: AE/L&T)

Quantity1

Rate4666

Amount 4666.58

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity1

Rate16556

Amount 16556

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity1

Rate3580

Amount 3580

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity1

Rate6272

Amount 6272

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity1

Rate890

Amount 890

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2C X 6 sq. mm

Quantity25

Rate234

Amount 5850

4 X 16 sq. mm (28mm)

Quantity50

Rate437

Amount 21850

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity37

Rate1254

Amount 46398

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity10

Rate2874

Amount 28740

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity36

Rate4330

Amount 155880

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity12

Rate2489

Amount 29868

Supply of Al Louver for 230 mm exhaust fan

Quantity12

Rate200

Amount 2400

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity10

Rate1500

Amount 15000

S.I.T.C. of ISI markrd 9 lit. capacity water type portable fir extinguisher (IS:15683), with gun-metal cap & nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools and plants, transportation, taxes, levis etc.

Quantity3

Rate8000

Amount 24000

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.