Bridge And Roof Company India Limited Tender
View complete overview of Nagaland Bridge And Roof Company India Limited Tender
Costs
EMD
₹ 3,30,000Document Cost
₹ 3,894Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BandR_842406_1Tender No
B AND R/GO/51256/ AR/NIT/CIVIL/P-01/01Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-Const-1-TypeVI-Pkg-01-kohima
BOQ Items
... More
Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m
-
-
-
... More
All kinds of soil
550
45
25217.5
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.
-
-
-
... More
All kinds of soil
273.37
334
91488.74
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
2.7.1 Ordinary rock
54.67
672
36775.42
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
... More
All kinds of soil
74.38
170
12661.71
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
176.51
413
73016.89
... More
Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
64.24
3520
226159.49
... More
Supplying chemical emulsion in sealed containers including delivery as specified
-
-
-
... More
Chlorpyriphos / Lindane emulsifiable concentrate of 20%
3.78
327
1237.04
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
50.4
72
3670.13
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
120.54
417
50296.52
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
-
-
-
... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
27.12
11772
319271.01
... More
1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )
3.94
10865
42810.78
... More
1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5
10304
51524.9
... More
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.4
736
37130.18
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
46.3
93
4310.07
... More
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
50.4
185
9347.18
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.
35.02
1110
38885.86
... More
REINFORCED CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level: Concrete of M25 grade with minimum cement content of 330kg/cum
48.76
13027
635216.51
... More
All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330kg/cum
111.62
16420
1832835
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
4.81
1121
5394.27
... More
Centering and shuttering including strutting propping etc. and removal of form work for :
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
145.75
501
73114.03
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
13.1
1090
14288.04
... More
Suspended floors, roofs, landings, balconies and access platform.
66.32
1248
82813.12
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
396.31
990
392739.25
... More
Columns, pillars, piers, abutments, posts and struts.
194.28
1310
254528.17
... More
Stairs (excluding landings) except spiral staircases.
121.94
1071
130653.83
... More
Weather shade, Chajjas, corbels etc., including edges
11.77
1327
15625.15
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically treated bars of grade Fe-500D or more
6042.94
146
882510.96
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically treated bars of grade Fe-500D or more
18692.29
146
2729822.03
... More
BRICK WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement Mortar 1:4 (1 cement : 4 coarse sand).
17.51
11210
196297.78
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement Mortar 1:6 (1 cement : 6 coarse sand).
55.69
14833
826070.38
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to floor
V level.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
221.74
1830
405926.11
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
221.74
105
23371.4
... More
WOOD WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Kiln seasoned and chemically treated hollock wood
0.53
120869
64060.84
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
... More
Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters
3.04
4091
12439.41
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
Kiln seasoned and chemically treated hollock wood
3.04
3322
10101.28
... More
Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
-
-
-
... More
35 mm thick including ISI marked stainless steel butt hinges with necessary screws
12.15
5027
61080.24
... More
25 mm thick (for cupboard) including ISI marked nickel plated
bright finished M.S. Piano hinges IS : 3818 marked with
necessary screws
15.75
4092
64457.82
... More
Providing and fixing wooden moulded beading to door and window frames
with iron screws, plugs and priming coat on unexposed surface etc.
complete :
-
-
-
... More
2nd class teak wood: 50x12 mm
107.85
312
33652.44
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
27.9
653
18242.97
... More
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
-
-
-
... More
12 mm thick
56
1086
60854.64
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
-
-
-
... More
18 mm thick
20.5
1774
36376.23
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
20
105
2103
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
-
-
-
... More
250 x 16 mm
20
382
7653
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
-
-
-
... More
200 x 10 mm
16
147
2366.56
... More
150 x 10 mm
4
123
492.28
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
100 mm
40
86
3469.6
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
-
-
-
... More
40 mm
20
431
8630.2
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
10
103
1036.9
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
-
-
-
... More
Triple strip vertical type
20
73
1461
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
-
-
-
... More
20 mm dia
42
611
25673.76
... More
Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood
7.56
5115
38671.14
... More
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
29.7
752
22363.8
... More
35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm
Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineer in-charge.
-
-
-
... More
Non decorative finish (matt finish)
9.45
5647
53373.51
... More
Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.
-
-
-
... More
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
42.21
1582
66802.81
... More
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).
-
-
-
... More
18 mm thick
7.95
1980
15744.42
... More
Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge.
6.51
1470
9571.2
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
9.08
4176
37920.71
... More
Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.
7.95
3811
30298.64
... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm
-
-
-
... More
200mm
12
249
2993.76
... More
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
12
369
4432.56
... More
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
4
1221
4884.96
... More
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
50
690
34509.5
... More
Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.
75
62
4697.25
... More
STEEL WORK
-
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angels 40x40x6 mm for diagonal braces
2
7788
15576.76
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc.
406.67
322
130968.07
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
25
231
5795
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
90
997
89760.6
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
M.S. tube
25
255
6399.75
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
10
301
3016.9
... More
ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)
319.94
759
243023.22
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)
319.94
920
294360.8
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
-
-
-
... More
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
34.21
1661
56830.68
... More
With float glass panes of 5 mm thickness (weight not
less than 12.50 kg/sqm)
8
2159
17274.32
... More
Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
8
241
1935.2
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in- charge complete.
-
-
-
... More
255 X 19 mm
20
536
10725.2
... More
Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
-
-
-
... More
Upto 5 mm depth and 5 mm width
50
212
10604.5
... More
Upto 10 mm depth and 10 mm width
25
288
7208.25
... More
PLASTERING & PAINTING WORK
-
-
-
... More
Cement Plaster (In Coarse Sand)
-
-
-
... More
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
169.46
479
81254.38
... More
15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)
254.18
552
140403.95
... More
20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
540.4
653
353264.88
... More
6 mm cement plaster of mix: 1:3 (1 cement : 3 fine sand)
252.3
412
104000.58
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
27.02
98
2665.25
... More
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.
27.02
111
3017.05
... More
Neat cement punning
87.56
3
314.34
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
792.7
201
159919.3
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
540.4
271
146875.32
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
15.19
311
4736.09
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
... More
Two coats
675.93
198
133834.14
... More
Applying priming coat :
-
-
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
100
90
9041
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
... More
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
15.19
100
1520.52
... More
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
675.93
104
70959.13
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.
-
-
-
... More
New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.
10
302
3024.2
... More
FLOORING WORK
-
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm
204.41
2095
428412.7
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete
-
-
-
... More
Size of Tile 600x600 mm
14.59
2388
34854.05
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
35.49
2780
98662.55
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
4.19
3320
13913.9
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
131.62
1524
200596.78
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
7.91
1528
12092.81
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
25
887
22195
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
-
-
-
... More
40 mm wide and 4 mm thick
8
129
1036.08
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick
7
929
6508.11
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite stone slab of colour black,cherry/ruby red.: Area of slab over 0.50 sq.m.
5
7208
36043.95
... More
Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
-
-
-
... More
Granite work
4.05
682
2763.32
... More
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
1316
2632.92
... More
WATER PROOFING TREATEMENT WORK
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
40
520
20834.4
... More
Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler: 110 mm
2
195
390.8
... More
Single tee without door: 110x110x110 mm
2
310
621.46
... More
Bend 87.5°: 110 mm bend
8
215
1720.16
... More
Shoe (Plain): 110 mm
8
188
1511.04
... More
Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
-
-
-
... More
110 mm
25
504
12604.25
... More
Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.
12
78
936.36
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
15
423
6357.9
... More
Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
8.62
434
3743.58
... More
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
225
1001
225409.5
... More
Grading roof for water proofing treatment with
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
14.63
12234
178995.56
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm
2
661
1323.54
... More
For horizontal surface one coat @1.10 kg per sqm.
1
507
507.42
... More
ROAD WORK
-
-
-
... More
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :
-
-
-
... More
7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
25
12892
322313.25
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
150
294
44104.5
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
150
1647
247083
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
3.2
14031
44900.03
... More
SANITARY, WATER SUPPLY AND DRAINAGE WORKS
-
-
-
... More
SUBHEAD NO. 1 : SANITARY INSTALLATIONS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:
-
-
-
... More
White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.
1
9417
9417.67
... More
Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
1
9025
9025.42
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
3
21236
63708.66
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
1
26227
26227.16
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap
4
4830
19323.52
... More
White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps
2
4449
8898.92
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
1
10223
10223.45
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe: 32 mm dia
2
148
296.32
... More
Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of EIC.
5
1443
7218.85
... More
Providing and fixing CP brass single lever telephonic wall mixture approved quality and make and as per the direction of EIC. (a) 15mm nominal dia
4
9967
39871.76
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
... More
Rectangular shape 1500x450 mm
4
2960
11840.68
... More
Providing and fixing soil, waste and vent pipes
-
-
-
... More
100 mm dia: Sand cast iron S&S pipe as per IS: 1729
40
1658
66335.2
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
-
-
-
... More
100mm
25
266
6656.5
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
... More
For 100 mm dia Pipe
15
502
7536.9
... More
Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
10
864
8644.9
... More
Providing and fixing plain bend of required degree
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
4
672
2690.72
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
8
836
6689.2
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:
-
-
-
... More
100X100X100X100 mm: Sand cast iron S & S as per IS - 1729
2
1692
3384.2
... More
Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100X100X100 mm: Sand cast iron S & S as per IS - 1729
2
1093
2186.72
... More
Providing and fixing single equal plain junction of required degree
-
-
-
... More
100X100X100 mm: Sand cast iron S & S as per IS - 1729
1
945
945.13
... More
Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100X100X75X75 mm: Sand cast iron S & S as per IS - 1729
2
1681
3363.66
... More
Providing and fixing sand cast iron S & S off sets as per IS : 1729.
-
-
-
... More
152 mm off sets: With100 mm dia pipe
2
1085
2170.94
... More
Providing and fixing terminal guard:
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
8
640
5120.16
... More
Providing and fixing collar :
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
8
650
5207.52
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
... More
100 mm inlet and 100 mm outlet: Sand cast iron S & S as per IS - 1729
7
2286
16003.33
... More
Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.
-
-
-
... More
100 mm diameter pipe
25
113
2832.25
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
7
333
2334.22
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms
8
977
7823.68
... More
Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.
7
238
1668.24
... More
Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .
3
2298
6896.19
... More
Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete
7
1534
10743.18
... More
SUBHEAD NO. 2 : WATER SUPPLY
-
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall
-
-
-
... More
PN - 16 Pipe, 20mm OD (SDR-7.4)
50
415
20765.5
... More
PN - 16 Pipe, 25mm OD (SDR-7.4)
28
514
14417.76
... More
PN - 16 Pipe, 32mm OD (SDR-7.4)
15
584
8769.6
... More
PN - 16 Pipe, 40mm OD (SDR-7.4)
4
852
3411.72
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15mm dia nominal bore
50
723
36175.5
... More
20mm dia nominal bore
90
836
75320.1
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
... More
External Work: PN - 16 Pipe, 40 mm OD (SDR-7.4)
75
682
51221.25
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
25mm nominal bore
4
867
3468.72
... More
32 mm nominal bore
2
960
1921.86
... More
Providing and fixing brass stop cock of approved quality
-
-
-
... More
15mm nominal bore
1
494
494.96
... More
20mm nominal bore
7
534
3739.54
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
1
650
650.2
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
40mm nominal bore: Vertical
1
1709
1709.12
... More
Providing and fixing CP Brass shower rose with 15 or 20mm inlet:
-
-
-
... More
100mm dia.
7
270
1896.86
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
2789
2789.05
... More
Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank
2000
15
31600
... More
Providing and fixing PTMT, push cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 98 mm long, weighing not less than 75 gms
2
157
314.24
... More
Providing and fixing PTMT grating of approved quality and colour.: Circular type
-
-
-
... More
100 mm nominal dia
7
54
378.56
... More
125 mm nominal dia with 25 mm waste hole
2
73
147.42
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.
-
-
-
... More
15 mm nominal bore
6
707
4243.8
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
-
-
-
... More
15 mm nominal bore
1
1148
1148.51
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
-
-
-
... More
15 mm nominal bore
4
968
3875.36
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
14
815
11410.84
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
1
614
614.28
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
1
279
279.86
... More
(above 2 items can be executed only upon approval from engineer-in-charge)
-
-
-
... More
SUBHEAD NO. 3 : DRAINAGE
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
-
-
-
... More
150 mm diameter
50
963
48169
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S. W. pipe
5
1783
8919.85
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S. W. pipe
45
1123
50561.1
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not
exceeding 300 mm dia
50
679
33993
... More
Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
180 X 150 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
1
4127
4127.83
... More
Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
19038
152304
... More
Extra for depth for manholes
-
-
-
... More
Size 90 X 80 cm: With common burnt clay F.P.S. (non modular) bricks with class designation 7.5
1
13239
13239.42
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design
-
-
-
... More
With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
1
45658
45658.8
... More
INTERNAL AND EXTERNAL ELECTRICAL WORKS
-
-
-
... More
WIRING: WIRING IN PVC CONDUIT
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group B
75
1925
144408.75
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
264
379
100201.2
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
240
447
107510.4
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
10
544
5440.7
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
25
1637
40928
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch
12
167
2013.36
... More
3 pin 5/6 amp socket outlet
12
198
2384.88
... More
Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.
1
161
161.27
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
11
601
6611.99
... More
Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.
20
65
1303.2
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).
34
777
26418.68
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
12
954
11454.96
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
7
733
5131.28
... More
MCCB, MCB & DB’S
-
-
-
... More
Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
-
-
-
... More
6 way (4 + 18), Double door
2
8102
16205.06
... More
Supplying and fixing of following ways surface/ recess
mounting, vertical type, 415 V, TPN MCB distribution board of
sheet steel, dust protected, duly powder painted, inclusive of
200 A tinned copper bus bar, common neutral link, earth bar,
din bar for mounting MCBs (but without MCBs and incomer ) as
required . (Note : Vertical type MCB TPDB is normally used
where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
1
12236
12236.86
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
39
417
16263.39
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 amps
1
1684
1684.36
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
438
438.19
... More
EARTHING
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
12171
48686.8
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
-
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
5
83
415.35
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
40
1583
63334.4
... More
LIGHTNING CONDUCTOR
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.
5
843
4219.05
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
120
205
24630
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
25
320
8022.75
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
197
394.22
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
-
-
-
... More
Above 6.5 metre and upto 8.0 metre
3
9881
29644.11
... More
MV CABLE LAYING
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
125
630
78802.5
... More
MV CABLE JOINTING & END TERMINATION
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 X 6 sq. mm (19mm)
6
390
2345.76
... More
4 X 16 sq. mm (28mm)
2
503
1006.7
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
30
335
10067.1
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
767
1534.48
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
11
346
3816.67
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
7
337
2360.4
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
... More
100 mm dia
10
2941
29419.3
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100 mm dia
10
1078
10783.8
... More
150 mm dia
5
1179
5896.85
... More
NON-SCHEDULE ITEMS
-
-
-
... More
P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following: 0-500v, analog voltmeter with VSS control fuse-1set
-
-
-
... More
LED indicating lamp-3nos: MAKE: AE/L&T
1
4668
4668.11
... More
Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.
3
16556
49668
... More
Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.
3
3580
10740
... More
Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.
3
5350
16050
... More
Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.
3
890
2670
... More
Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :
-
-
-
... More
2C X 6 sq. mm
75
234
17550.75
... More
4 X 16 sq. mm (28mm)
50
437
21850
... More
Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.
30
1062
31860
... More
Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.
6
2456
14736
... More
Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.
6
2022
12132
... More
Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..
8
2457
19656
... More
Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.
-
-
-
... More
1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
3
3670
11010
... More
1400mm(56") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
8
3880
31040.08
... More
Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.
7
2109
14763
... More
Supply of Al Louver for 230 mm exhaust fan
7
200
1400
... More
Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
8
1500
12000
... More
Supplying and fixing 240/415 V MCB of Breaking
capacity 10kA & C characteristics on din rail of
existing DBs and necessary connection
-
-
-
... More
40 A 4P MCB
2
3519
7038
... More
40 A TP MCB
3
2863
8589
... More
S.I.T.C. of ISI markrd 9 lit. capacity water type portable fir extinguisher (IS:15683), with gun-metal cap & nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools and plants, transportation, taxes, levis etc.
1
8000
8000
... More
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%