Bridge And Roof Company India Limited Tender

View complete overview of Nagaland Bridge And Roof Company India Limited Tender

Bridge And Roof Company India Limited Tender

Works

Civil And Construction

Building Construction

Eprocure

Kohima, Nagaland

Opening Date2 Jan 2025

Closing Date23 Jan 2025

Tender Amount₹ 1,75,75,174

Email

Download

Costs

EMD
₹ 3,52,000
Document Cost
₹ 4,189
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2025_BandR_842465_1
Tender No
B AND R/GO/51256/ AR/NIT/CIVIL/P-02/01
Tender Authority
Bridge And Roof Company India Limited View
Purchaser Address
-
Website
http://eprocure.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-23.0 MBeNIT-Const-2-TypeI...eNIT-Const-2-TypeIV-Pkg-02-kohima.pdf

eNIT-Const-2-TypeIV-Pkg-02-kohima

Tender Notice-11.3 MBTendernotice_1.pdf

eNOTICE-NIT-Const-2-TypeIV-Pkg-02-kohima.pdf

BOQ-1820.2 kBBOQ_885549.xls

BOQ-Package02

Document-12824.3 kBMake-List.pdf

Make-list

Document-11786.6 kB2 NOS TYPE IV QTR....2 NOS TYPE IV QTR.(G+I) 01 BLOCK IGAR (N) KOHIMA GARRISON (NAGALAND) ELECTRICAL 01.pdf

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m

Quantity-

Rate-

Amount -

All kinds of soil

Quantity425

Rate45

Amount 19503.25

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity460.22

Rate334

Amount 154123.08

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity107.43

Rate170

Amount 18299.63

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity498.41

Rate413

Amount 206316.82

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity37.57

Rate3522

Amount 132353.1

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity5.59

Rate327

Amount 1830.56

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Quantity-

Rate-

Amount -

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity74.49

Rate72

Amount 5427.34

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity83.49

Rate417

Amount 34859.58

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity18.78

Rate11780

Amount 221232.34

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity10.52

Rate10872

Amount 114381.54

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity2

Rate10311

Amount 20623.42

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity17.13

Rate737

Amount 12628.06

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity31.09

Rate93

Amount 2896.34

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity17.13

Rate185

Amount 3178.99

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity27.29

Rate1111

Amount 30322.46

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity64.19

Rate13035

Amount 836775.06

All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity92.6

Rate16431

Amount 1521514.3

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity5.34

Rate1122

Amount 5992.55

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity135.72

Rate501

Amount 68127.37

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity18.52

Rate1091

Amount 20212.54

Suspended floors, roofs, landings, balconies and access platform.

Quantity306.7

Rate1249

Amount 383224.72

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity303.27

Rate991

Amount 300731.63

Columns, pillars, piers, abutments, posts and struts.

Quantity199.01

Rate1310

Amount 260894.15

Stairs (excluding landings) except spiral staircases.

Quantity129.25

Rate1072

Amount 138576.68

Weather shade, Chajjas, corbels etc., including edges

Quantity18.97

Rate1328

Amount 25199.75

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity8061.16

Rate146

Amount 1177977.31

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity15693.78

Rate146

Amount 2293332.07

BRICK WORK

Quantity-

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity24.62

Rate11217

Amount 276185.44

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement Mortar 1:6 (1 cement : 6 coarse sand).

Quantity79.2

Rate14491

Amount 1147691.16

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity175.06

Rate140

Amount 24669.46

Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity-

Rate-

Amount -

Coursed rubble masonry (first sort) with hard stone in foundation andplinth with :

Quantity-

Rate-

Amount -

Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity75

Rate12900

Amount 967570.5

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity53.62

Rate105

Amount 5654.77

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity1.08

Rate120948

Amount 130624.27

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters

Quantity8.82

Rate4094

Amount 36114.2

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity8.82

Rate3324

Amount 29326.06

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):

Quantity-

Rate-

Amount -

12 mm thick

Quantity35.2

Rate1087

Amount 38276.48

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Quantity-

Rate-

Amount -

18 mm thick

Quantity19.2

Rate1775

Amount 34091.52

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity22.68

Rate5030

Amount 114090.83

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Quantity16

Rate4095

Amount 65523.68

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity22.68

Rate654

Amount 14839.52

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Quantity-

Rate-

Amount -

40 mm

Quantity6

Rate431

Amount 2590.8

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Quantity24

Rate103

Amount 2490

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Quantity24

Rate73

Amount 1754.64

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :

Quantity-

Rate-

Amount -

20 mm dia

Quantity24

Rate611

Amount 14680.08

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: Twin rubber stopper

Quantity4

Rate105

Amount 420.88

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity8

Rate382

Amount 3063.2

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity44

Rate148

Amount 6512.44

150 x 10 mm

Quantity18

Rate123

Amount 2216.7

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity56

Rate86

Amount 4860.8

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity8.82

Rate5118

Amount 45145.79

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity45.72

Rate1583

Amount 72404.94

STEEL WORK

Quantity-

Rate-

Amount -

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.

Quantity-

Rate-

Amount -

Using M.S. angels 40x40x6 mm for diagonal braces

Quantity3.78

Rate7793

Amount 29459.28

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Quantity31

Rate1094

Amount 33934.15

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Quantity-

Rate-

Amount -

Ridges plain (500 - 600mm)

Quantity9

Rate734

Amount 6610.5

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity457.92

Rate322

Amount 147569.3

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity20

Rate231

Amount 4639

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity20

Rate256

Amount 5123.2

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Quantity200

Rate997

Amount 199598

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Quantity-

Rate-

Amount -

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity30

Rate301

Amount 9056.4

ALUMINIUM WORK

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Quantity-

Rate-

Amount -

For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity296.01

Rate760

Amount 224994.24

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity296.01

Rate920

Amount 272521.61

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity57.24

Rate1662

Amount 95150.62

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity7.2

Rate242

Amount 1742.83

Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

Quantity-

Rate-

Amount -

Upto 5 mm depth and 5 mm width

Quantity91.08

Rate212

Amount 19329.91

Upto 10 mm depth and 10 mm width

Quantity20

Rate288

Amount 5770.4

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity316.07

Rate479

Amount 151650.39

15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)

Quantity474.1

Rate552

Amount 262058.78

20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity557.04

Rate654

Amount 364376.58

6 mm cement plaster of mix.: 1:3 (1 cement : 3 fine sand)

Quantity419.1

Rate412

Amount 172870.37

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity8.47

Rate98

Amount 835.99

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity8.47

Rate111

Amount 946.44

Neat cement punning

Quantity40.72

Rate3

Amount 146.18

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity1209.26

Rate201

Amount 244125.41

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity635.42

Rate271

Amount 172815.18

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity66.18

Rate311

Amount 20647.5

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity487.91

Rate198

Amount 96669.61

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/lit, of approved manufacturer & of required shade and colour complete to achive even shade & colour.

Quantity-

Rate-

Amount -

New work (Two or more coats) over & including water thinnable priming coat with cement primer having VOC content less than 50gm/lit sqm.

Quantity119.15

Rate302

Amount 36057.17

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Quantity49.8

Rate90

Amount 4505.41

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity16.38

Rate100

Amount 1640.78

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity1209.26

Rate105

Amount 127044.86

FLOORING WORK Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Quantity-

Rate-

Amount -

Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm

Quantity98.95

Rate2097

Amount 207518.93

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity7.16

Rate2390

Amount 17115.62

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity26.64

Rate2781

Amount 74107.68

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity4.45

Rate3322

Amount 14786.99

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity46.47

Rate1525

Amount 70869.54

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity116.57

Rate1529

Amount 178327.62

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity20

Rate888

Amount 17767.4

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity8

Rate129

Amount 1036.72

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Quantity-

Rate-

Amount -

18 mm thick

Quantity5

Rate930

Amount 4651.7

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity50

Rate521

Amount 26060

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler: 110 mm

Quantity2

Rate195

Amount 391.04

Single tee without door: 110x110x110 mm

Quantity2

Rate310

Amount 621.86

Bend 87.5°: 110 mm bend

Quantity8

Rate215

Amount 1721.36

Shoe (Plain): 110 mm

Quantity8

Rate189

Amount 1512

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity25

Rate504

Amount 12612.5

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity12

Rate78

Amount 936.96

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity15

Rate424

Amount 6362.1

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity12

Rate434

Amount 5214.84

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity8.78

Rate12242

Amount 107491.87

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity133

Rate1002

Amount 133328.51

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Quantity-

Rate-

Amount -

For vertical surface two coats @ 0.70 kg per sqm

Quantity2

Rate662

Amount 1324.4

For horizontal surface one coat @1.10 kg per sqm.

Quantity20

Rate507

Amount 10155.2

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity29.7

Rate753

Amount 22378.65

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineerin-charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity7.29

Rate5651

Amount 41200.67

ROAD WORK

Quantity-

Rate-

Amount -

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Quantity130

Rate294

Amount 38248.6

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Quantity130

Rate1648

Amount 214279

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Quantity3

Rate14040

Amount 42121.26

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Quantity5

Rate12060

Amount 60304.9

Stone Work

Quantity-

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Quantity-

Rate-

Amount -

Granite stone slab of colour black,cherry/ruby red.: Area of slab over 0.50 sq.m.

Quantity16.77

Rate8371

Amount 140396.43

DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level while P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:

Quantity-

Rate-

Amount -

White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.

Quantity2

Rate9423

Amount 18847.66

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity4

Rate9031

Amount 36125.24

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap

Quantity4

Rate4834

Amount 19336.16

White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps

Quantity2

Rate4452

Amount 8904.74

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm

Quantity2

Rate10230

Amount 20460.24

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe: 32 mm dia

Quantity14

Rate148

Amount 2075.5

Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of EIC.

Quantity4

Rate1444

Amount 5778.8

Providing and fixing CP brass single lever telephonic wall mixture approved quality and make and as per the direction of EIC. (a) 15mm nominal dia

Quantity4

Rate9974

Amount 39897.8

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia: Sand cast iron S&S pipe as per IS: 1729

Quantity45

Rate1659

Amount 74675.7

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity18

Rate266

Amount 4795.74

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity18

Rate502

Amount 9050.22

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity14

Rate865

Amount 12110.84

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity6

Rate673

Amount 4038.72

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate836

Amount 6693.6

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

Quantity-

Rate-

Amount -

100X100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity2

Rate1693

Amount 3386.4

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity4

Rate1094

Amount 4376.32

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity4

Rate945

Amount 3783

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm: Sand cast iron S & S as per IS - 1729

Quantity2

Rate1682

Amount 3365.86

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate640

Amount 5123.52

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity8

Rate651

Amount 5210.88

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet: Sand cast iron S & S as per IS - 1729

Quantity8

Rate2287

Amount 18301.44

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity45

Rate113

Amount 5101.65

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity8

Rate333

Amount 2669.36

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity6

Rate978

Amount 5871.54

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity6

Rate238

Amount 1430.82

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity8

Rate2300

Amount 18401.84

Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete

Quantity8

Rate1535

Amount 12285.92

SUBHEAD NO. 2 : WATER SUPPLY

Quantity-

Rate-

Amount -

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Work: Exposed on wall

Quantity-

Rate-

Amount -

PN - 16 Pipe, 20mm OD (SDR-7.4)

Quantity20

Rate415

Amount 8311.6

PN - 16 Pipe, 25mm OD (SDR-7.4)

Quantity25

Rate515

Amount 12881.5

PN - 16 Pipe, 32mm OD (SDR-7.4)

Quantity25

Rate585

Amount 14625.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity50

Rate723

Amount 36199

20mm dia nominal bore

Quantity35

Rate837

Amount 29310.05

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

External Work: PN - 16 Pipe, 40 mm OD (SDR-7.4)

Quantity75

Rate683

Amount 51254.25

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity4

Rate867

Amount 3471

32 mm nominal bore

Quantity4

Rate961

Amount 3846.24

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity2

Rate495

Amount 990.58

20mm nominal bore

Quantity4

Rate534

Amount 2138.28

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity1

Rate650

Amount 650.63

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore: Vertical

Quantity1

Rate1710

Amount 1710.24

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity6

Rate271

Amount 1626.96

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity1500

Rate15

Amount 23715

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity2

Rate157

Amount 314.44

Providing and fixing PTMT grating of approved quality and colour:-Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity6

Rate54

Amount 324.72

125 mm nominal dia with 25 mm waste hole

Quantity2

Rate73

Amount 147.52

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity8

Rate707

Amount 5662.08

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1149

Amount 2298.52

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity4

Rate969

Amount 3877.88

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity16

Rate815

Amount 13049.44

SUBHEAD NO. 3 : DRAINAGE

Quantity-

Rate-

Amount -

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity75

Rate964

Amount 72300.75

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity75

Rate1124

Amount 84324

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity250

Rate680

Amount 170075

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

180 X 150 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate4130

Amount 4130.52

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.

Quantity-

Rate-

Amount -

Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity15

Rate19050

Amount 285756.45

Extra for depth for manholes

Quantity-

Rate-

Amount -

Size 90 X 80 cm: With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity1

Rate13248

Amount 13248.06

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity1

Rate45688

Amount 45688.6

DSR- INTERNAL AND EXTERNAL ELECTRICAL WORKS

Quantity-

Rate-

Amount -

WIRING : WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group B

Quantity104

Rate1926

Amount 200377.84

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity300

Rate379

Amount 113940

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity280

Rate448

Amount 125512.8

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity10

Rate544

Amount 5444.3

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Quantity20

Rate1638

Amount 32763.8

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity24

Rate167

Amount 4029.36

3 pin 5/6 amp socket outlet

Quantity24

Rate198

Amount 4772.64

Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.

Quantity3

Rate161

Amount 484.11

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity12

Rate601

Amount 7217.76

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity80

Rate65

Amount 5216

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Quantity40

Rate777

Amount 31101.2

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity12

Rate955

Amount 11462.4

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity8

Rate733

Amount 5868.16

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

6 way (4 + 18), Double door

Quantity2

Rate8107

Amount 16215.62

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity1

Rate12244

Amount 12244.85

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity39

Rate417

Amount 16274.31

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

100 amps

Quantity1

Rate2000

Amount 2000.06

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity1

Rate438

Amount 438.48

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity4

Rate12179

Amount 48718.6

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity-

Rate-

Amount -

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity10

Rate83

Amount 831.3

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity15

Rate1584

Amount 23766

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity4

Rate844

Amount 3377.44

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity80

Rate205

Amount 16430.4

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity20

Rate321

Amount 6422.4

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity2

Rate197

Amount 394.46

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity2

Rate9887

Amount 19775.64

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity100

Rate630

Amount 63083

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity4

Rate391

Amount 1564.8

4 X 16 sq. mm (28mm)

Quantity2

Rate503

Amount 1007.36

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity36

Rate335

Amount 12088.44

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity2

Rate767

Amount 1535.48

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity12

Rate347

Amount 4166.4

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity8

Rate337

Amount 2699.36

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity5

Rate2943

Amount 14719.25

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100 mm dia

Quantity5

Rate1079

Amount 5395.45

150 mm dia

Quantity5

Rate1180

Amount 5900.75

NON-SCHEDULE ITEMS

Quantity-

Rate-

Amount -

P/I metering arrangement in MS enclosure matching with the vetical /HorizotalTPDB to be fixed at the top of the DB i/c matching color as per following:0-500v, analog voltmeter with VSS control fuse-1set

Quantity-

Rate-

Amount -

LED indicating lamp-3nos: MAKE: AE/L&T

Quantity1

Rate4667

Amount 4667

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity2

Rate16556

Amount 33112

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity2

Rate3580

Amount 7160

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity2

Rate5350

Amount 10700

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity2

Rate890

Amount 1780

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2C X 6 sq. mm

Quantity50

Rate234

Amount 11700

4 X 16 sq. mm (28mm)

Quantity50

Rate437

Amount 21850

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity36

Rate1062

Amount 38232

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.

Quantity4

Rate2456

Amount 9824

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.

Quantity6

Rate2022

Amount 12132

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity8

Rate2457

Amount 19656

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity8

Rate3670

Amount 29360

1400mm(56") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity4

Rate3880

Amount 15520

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity8

Rate2109

Amount 16872

Supply of Al Louver for 230 mm exhaust fan

Quantity8

Rate200

Amount 1600

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity8

Rate1500

Amount 12000

S.I.T.C. of ISI marked 9 Ltr. capacity Water type portable fire extinguisher (IS:15683), with gun-metal cap and nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc.

Quantity2

Rate8000

Amount 16000

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Quantity-

Rate-

Amount -

40 A 4P MCB

Quantity2

Rate3519

Amount 7038

40 A TP MCB

Quantity3

Rate2863

Amount 8589

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.