Assam Rifles Tender
View complete overview of Nagaland Assam Rifles Tender
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirements to bid or participate in this tender are Class S, Class A, Class B, Class C, and Class D, or specifically Class 'S' and above for certain contractors. However, the most specific and consistent requirement mentioned is Class 'S' and above, particularly for DGAR Enlisted Contractors.
Bid Capacity
... View More
30% of the contract value.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the class of contractor. For 'B' class, the bidder should have: - One graduate Engineer with a minimum of 5 years of experience, - One diploma Engineer with a minimum of 5 years of experience. For 'C' class, the bidder should have: - One graduate Engineer with a minimum of 3 years of experience, - One diploma Engineer with a minimum of 5 years of experience. For 'D' class, the bidder should have: - One graduate Engineer with a minimum of 2 years of experience, - One diploma Engineer with a minimum of 3 years of experience. For class 'S', the bidder should have completed: - Three works costing not less than Rs.320 lakhs each, - Or two works costing not less than Rs.400 lakhs each, - Or one work costing not less than Rs.640 lakhs each. For class 'A', the bidder should have completed: - Three works costing not less than Rs.80 lakhs each, - Or two works costing not less than Rs.100 lakhs each, - Or one work costing not less than Rs.160 lakhs each. For class 'B', the bidder should have completed: - Three works costing not less than Rs.40 lakhs each, - Or two works costing not less than Rs.50 lakhs each, - Or one work costing not less than Rs.80 lakhs each. For class 'C', the bidder should have completed: - Three works costing not less than Rs.20 lakhs each, - Or two works costing not less than Rs.25 lakhs each, - Or one work costing not less than Rs.40 lakhs. For class 'D', the bidder should have completed: - Three works costing not less than Rs.10 lakhs each, - Or two works costing not less than Rs.12.50 lakhs each, - Or one work costing not less than Rs.20 lakhs. No specific percentage of similar works completed is mentioned. However, the financial capability of the bidder should be at least 30% of the value of the contract, and the Earnest Money Deposit (EMD) should be 2% of the tender value.
Costs
EMD
₹ 4,95,100Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ARMHA_848201_1Tender No
VIII.11014/8696/7 Sect/EngrTender Authority
Assam Rifles ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
NIT for the wk Provn of apch rd side Drain and Hume pipe culvert for COB Tizit L Singha Mon Tang Chenmoho S Shingnyu and Lungwa of 27 AR
BOQ for the work Provn of approach road side Drain and Hume pipe culvert for COB Tizit L Singha Mon Tang Chenmoho S Shingnyu and Lungwa of 27 AR
BOQ Items
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
1300
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-ChargeProviding and laying 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
6520.5
-
-
... More
Drainage Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
179.36
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth
level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
44.84
-
-
... More
Providing and laying cement concrete in drain, up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
77.88
-
-
... More
Supplying and fixing 1.25 mm thick plastic sheet
354
-
-
... More
Hume pipe culvert Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
38.25
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3.16
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
5.58
-
-
... More
Brick work with sub clASS 'B' bricks built in CM 1:6
5.23
-
-
... More
Providing and laying reinforcement concrete hume pipe class NP3 with one collar per length of pipe 600 mm bore
22.5
-
-
... More
20 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
59.4
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
23.79
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements