Assam Rifles Tender

French spirit polishing : Two or more coats on new works including a coat of wood filler.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required lengt with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks).

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.

Providing and painting of 02 Coats Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with One or more coats on old work.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing P.V.C. waste pipe Semi rigid pipe 40mm dia for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing hose braded connection pipe with brass unions :60 cm length 15 mm nominal bore.

Providing and fixing mirror of superior glass (of approved quality) and of Rectangular shape 1500x450 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints in Concealed work etc.complete as per direction of Engineer in Charge.

Providing and fixing 15 mm nominal dia Wall Mixer with provision of Over Head Shower with 115mm long Bend pipe. (Make - Hindware, Cat No. F280018)

Providing and fixing 15 mm nominal dia Kitchen Mixer with Swivel Spout Table mounted (Make - Hindware, Cat No. F440019)

Providing and fixing 15 mm nominal Single Lever Basin Mixer tall with Popup Waste (Make - Hindware, Cat No. F280011)

Providing and fixing 15 mm nominal dia Bib Cock 2 in 1 , Advance with Wall flange (Make - Hindware, Cat No. F280054)

Providing and fixing 15 mm nominal dia Angular Stop Cock (Make - Hindware, Cat No. F280004)

Providing and fixing Towel Rod Stainless Steel (Make - Hindware, Cat No. F580012)

Providing and fixing SS Towel Ring (Make - Hindware, Cat No. F580003)

Providing and fixing Toilet Paper Holder (Make - Hindware, Cat No. F890003)

Providing and fixing Soap Dish (Brass) (Make - Hindware, Cat No. F890005)

Providing and fixing Brisk Health Faucet ABS with Rubbit Cleaning system 1.25m long SS Flexible Tube and BAS Wall hook (Make - Hindware, Cat No. F160110)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required (Group B).

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required and as per direction of Engineer - in -Charge.

Supplying and fixing of 5/6 amps switch modular type on the existing switch box/ cover including connections etc. as required.

Supplying and fixing of 3 pin 5/6 Amp modular socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing 8 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 6 pin 15/16 Amp Modular socket outlet, with plug top and metal chained cover in sheet steel enclosure

Supplying and fixing 15/16 Amp Modular switch , with plug top and metal chained cover in sheet steel enclosure

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for Single pole inductive load of poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 40 amps rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including single core cable and earthing etc. as quired.connection with 1.5 sq. mm FR PVC insulated, copper conductor,

Supply and fixing LED down light of size 150mmX150MM Square 7 watt 3000K Warm white (Make - Havells)

Supply and fixing Industrial type 20Amp Socket for AC