Assam Rifles Tender
View complete overview of Nagaland Assam Rifles Tender
Costs
EMD
₹ 2,32,530Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ARMHA_772475_1Bid Award Id
ViewTender No
VIII.8011.6Sect.2023Tender Authority
Assam Rifles ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ for Special Repair to Roof Treatment and Repair to Other Rank Cook House Dining Hall Existing Water Supply Pipe line roof treatment and repair to Junior Commissioned Officers Mess roof treatment repair to Officers Mess at Battalion Headquar
BOQ Items
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge with cement mortar 1:4 (1cement: 4 coarse sand).
220.11
-
-
Removing the existing PVC storage tank to ground and re fixing the same in position after completion of roof treatment with necessary all fittings complete including cleaning of same.
2
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:- (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engr-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engr - in- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge.
386.65
-
-
Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level.
2.56
-
-
Providing and laying 15 mm cement plaster onplinth protection and drain finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) incl dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.
264.43
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes.
15.08
-
-
Providing & fixing fly proof wire gauze to windows with M.S. Flat 15x3 mm and nuts & bolts complete: galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides
38.88
-
-
Providing and fixing fly proof galvanized M.S. wire guague to wooden doors using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with 2nd class teak wood beading 62 x19 mm.
34
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
3
-
-
Providing and fixing P.V.C. low level flushing cistern 10 litre capacity - White with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
3
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete with flexible pipe 32 mm dia.
6
-
-
Providing and fixing PTMT Waste Coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms for wash basin and sink, of approved quality and colour.
6
-
-
Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.
4
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
190.53
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (one or more coat applied @ 0.90 ltr/ 10 sqm) on existing cement paint surface including removing water profing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
308.55
-
-
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old work (one or more coats).
596.81
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with One or more coats on old work.
108.98
-
-
Providing and fixing C.P. brass long nose bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms.
6
-
-
Providing and fixing C.P. brass angle valve 15 mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931.
6
-
-
Scrifying in PCC floors and Kitchen platfofrm/shelves and preparing the surface for tiling including the cost of disposal of rubbish materials within 50 metres lead.
219
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.
148.19
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
334.59
-
-
Providing and laying vitrified floor tiles in 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
164.95
-
-
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand).
63.84
-
-
Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
39.84
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead.
3
-
-
Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mmX 11 mm.
5.4
-
-
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
8.7
-
-
Providing and fixing aluminium handles 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.
6
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length with Sal wood.
0.23
-
-
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge.
6.72
-
-
Providing and fixing 12mm thick flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).
7.56
-
-
Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
16
-
-
Providing and fixing 75 mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete
8
-
-
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws
16
-
-
SCHEDULE ‘A’ PART - II (Special repair to existing water supply pipe line)
-
-
-
Providing and fixing PN - 10 Pipe, 110 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
775
-
-
Providing and fixing PN - 10 Pipe, 90 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
294
-
-
Providing and fixing PN - 10 Pipe, 50 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
125
-
-
Providing and fixing PN - 10 Pipe, 32 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
300
-
-
Providing and fixing PN - 10 Pipe, 25 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
150
-
-
Providing and fixing PN - 10 Pipe, 40 mm OD (SDR-11) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
200
-
-
Providing and fixing PPR Unions 25mm dia and complete as per direction of Engineer - in - Charge.
4
-
-
Providing and fixing 100 mm diameter (Class -I) C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)
4
-
-
Providing and fixing PPR Unions 40mm dia and complete as per direction of Engineer - in - Charge.
10
-
-
Providing and fixing PPR Unions 50 mm dia and complete as per direction of Engineer - in - Charge.
5
-
-
Providing and fixing PPR Gate valve of 65 mm dia and complete as per direction of Engineer - in - Charge.
1
-
-
Providing and fixing PPR Gate valve of 32 mm dia and complete as per direction of Engineer - in - Charge.
10
-
-
Providing and fixing PPR Gate valve of 40 mm dia and complete as per direction of Engineer - in - Charge.
10
-
-
Providing and fixing PPR Gate valve of 50 mm dia and complete as per direction of Engineer - in - Charge.
10
-
-
SCHEDULE ‘A’ PART - III (Special repair to roof treatment and repair to JCO mess )
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
330.7
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
330.7
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge with cement mortar 1:4 (1cement: 4 coarse sand).
190.71
-
-
Removing the existing PVC storage tank to ground and re fixing the same in position after completion of roof treatment with necessary all fittings complete including cleaning of same.
2
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:- (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engr-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engr - in- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge.
386.65
-
-
Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level.
2.56
-
-
Providing and laying 15 mm cement plaster onplinth protection and drain finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) incl dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.
264.43
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes.
15.08
-
-
Providing & fixing fly proof wire gauze to windows with M.S. Flat 15x3 mm and nuts & bolts complete: galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides
38.88
-
-
Providing and fixing fly proof galvanized M.S. wire guague to wooden doors using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with 2nd class teak wood beading 62 x19 mm.
34
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
3
-
-
Providing and fixing P.V.C. low level flushing cistern 10 litre capacity - White with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
3
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete with flexible pipe 32 mm dia.
6
-
-
Providing and fixing PTMT Waste Coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms for wash basin and sink, of approved quality and colour.
6
-
-
Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.
4
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
190.53
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (one or more coat applied @ 0.90 ltr/ 10 sqm) on existing cement paint surface including removing water profing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
308.55
-
-
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old work (one or more coats).
596.81
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with One or more coats on old work.
108.98
-
-
Providing and fixing C.P. brass long nose bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms.
6
-
-
Providing and fixing C.P. brass angle valve 15 mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931.
6
-
-
Scrifying in PCC floors and Kitchen platfofrm/shelves and preparing the surface for tiling including the cost of disposal of rubbish materials within 50 metres lead.
219
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.
148.19
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
252.77
-
-
Providing and laying vitrified floor tiles in 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
164.95
-
-
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand).
63.84
-
-
Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
39.84
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead.
3
-
-
Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mmX 11 mm.
5.4
-
-
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
8.7
-
-
Providing and fixing aluminium handles 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.
6
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length with Sal wood.
0.23
-
-
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge.
6.72
-
-
Providing and fixing 12mm thick flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).
7.56
-
-
Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
16
-
-
Providing and fixing 75 mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete
8
-
-
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws
16
-
-
SCHEDULE ‘A’ PART - IV (Special repair to roof treatment and repair to Offrs mess)
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
418.58
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
418.58
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge with cement mortar 1:4 (1cement: 4 coarse sand).
251.28
-
-
Removing the existing PVC storage tank to ground and re fixing the same in position after completion of roof treatment with necessary all fittings complete including cleaning of same.
4
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:- (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engr-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engr - in- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engr-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge.
618.05
-
-
Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level.
3.84
-
-
Providing and laying 15 mm cement plaster onplinth protection and drain finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) incl dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.
396.41
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes.
14.17
-
-
Providing & fixing fly proof wire gauze to windows with M.S. Flat 15x3 mm and nuts & bolts complete: galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides
80.64
-
-
Providing and fixing fly proof galvanized M.S. wire guague to wooden doors using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with 2nd class teak wood beading 62 x19 mm.
36.96
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
4
-
-
Providing and fixing P.V.C. low level flushing cistern 10 litre capacity - White with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
4
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete with flexible pipe 32 mm dia.
6
-
-
Providing and fixing PTMT Waste Coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms for wash basin and sink, of approved quality and colour.
6
-
-
Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.
6
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
841.98
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (one or more coat applied @ 0.90 ltr/ 10 sqm) on existing cement paint surface including removing water profing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
450.96
-
-
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old work (one or more coats).
874.35
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with One or more coats on old work.
80.64
-
-
Supply and French spirit polishing One or more coats on old work and as per direction of Engr-in - Charge.
110.13
-
-
Providing and fixing C.P. brass long nose bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms.
9
-
-
Providing and fixing C.P. brass angle valve 15 mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931.
9
-
-
Scrifying in PCC floors and Kitchen platfofrm/shelves and preparing the surface for tiling including the cost of disposal of rubbish materials within 50 metres lead.
194.43
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.
141.41
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
123.03
-
-
Providing and laying vitrified floor tiles in 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
385.99
-
-
Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
25.76
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead.
7
-
-
Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mmX 11 mm.
12.6
-
-
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
34.3
-
-
Providing and fixing aluminium handles 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.
7
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length with Sal wood.
0.46
-
-
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge.
13.44
-
-
Providing and fixing 12mm thick flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).
15.12
-
-
Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
24
-
-
Providing and fixing 75 mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete
12
-
-
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws
24
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements