Regional Institute Of Paramedical And Nursing Sciences Tender

First class brickwork in superstructure above plinth level upto floor V level . (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand), including the joints with white cement and matching pigments etc.complete.as per design collours. c) Double charge

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. ii) Pastel

Providing and fixing CPVC Pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, inclusing fixing the pipes with clamps 1m spacing. This include jointing of pipes and fittings with one step CPVC solvent cement and tetsing of joints complete as per direction of Engineer in charge. internal work-exposed wall. (c) 25mm dia nominal bore

(f) 50mm dia nominal bore

making connection of Astral CPVC pipes distribution branch by providing and fixing Brass Elbow 90 with jointing, testing complete including cutting and making good etc. (c) 25mm dia

(f) 50mm dia

Making connection of Astral CPVC pipes distribution branch by providing and Elbow 45 with jointing,testing complete including cutting and making good etc. (c) 25mm dia

(f) 50mm dia

Making connection of Astral CPVC pipes distribution branch by providing and Elbow 45 with jointing,testing complete including cutting and making good etc. b) Using WPC Alstone board or equivalent.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately ). For fixed portion. c) Powder coated

Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. c) Powder coated i) 2 - track sliding windows/ventilators.

Supplying of glass panes at site. b) 5mm thick plate sheet glass.

Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excluding cost of centering and shuttering and reinforcement in - b) All work from plinth level upto floor V level.

Centering and shuttering including strutting,propping etc… e) Suspended floors, roof, landing etc

Steel reinforcement for RCC work including straigthening, cutting, bending, placing in position and binding all complete. b) Thermo - Mechanically Treated bars of grade Fe-500 or more.

First class brickwork in superstructure above plinth level upto floor V level . (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand), including the joints with white cement and matching pigments etc.complete.as per design collours. c) Double charge

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. ii) Pastel

Providing and fixing CPVC Pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, inclusing fixing the pipes with clamps 1m spacing. This include jointing of pipes and fittings with one step CPVC solvent cement and tetsing of joints complete as per direction of Engineer in charge. internal work-exposed wall. (c) 25mm dia nominal bore

(c) 50mm dia nominal bore

making connection of Astral CPVC pipes distribution branch by providing and fixing Brass Elbow 90 with jointing, testing complete including cutting and making good etc. (c) 25mm dia

(f) 50 mm dia

Making connection of Astral CPVC pipes distribution branch by providing and Elbow 45 with jointing,testing complete including cutting and making good etc. (c) 25mm dia nominal bore

(f) 50mm dia nominal bore

Providing and fixing 25mm thick MDF board greenply or equivalent panelled shutters for cupboards etc. including butt hinges, handles, and locking arrangments complete. b) Using WPC Alstone board or equivalent.