Ministry Of Health And Family Welfare Tender

Centering and shuttering including strutting, propping etc. and removal of form for all heights : c) Columns, pillars, piers, abutments, posts and struts.

(d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

(e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj,etc.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. (a) in cement moratar 1:3 ( 1 cement : 3 coarse sand )

15mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. a) Regular interior emulsion like Rangoli deluxe emulsion etc.

Finishing walls with exterior emulsion of required shade on new work (three or more coats) to give an even shade. a) Regular exterior emulsion like supercote, walmasta etc.

Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. a) Natural Colour

Supplying of glass panes at site. b) 5mm thick plate sheet glass.

Providing and fixing factory made PVC door frame made of PVC extruded section (Chaukhat) having overall dimension of 48x40 mm (tolerance + 1 mm) with wall thickness 2.0 mm + 0.2 mm, corners of the door frame to be mitred and joined by means of plastic/M.S. galvanished brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanised M.S. tube of size 19x19 mm and 1 mm + 0.1 mm wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. (Sintex, Plasopan or equivalent) :

Factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) (Sintex, Plasopan or equivalent). (a) 24mm thick shutter

Providing and fixing dressed & chamfered 1st class local wood door and window architrave fixed with sleeves on door chaukhat etc complete. (a) 100mm X 12 mm

Providing 2nd class local wood work dressed in frames of sill, upright, batten, post, beams, etc. as structural members fixed in position complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm uPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: ii) Pastel

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. a) 110mm dia.

b) 75mm dia.

Providing and fixing single equal SWRPVC plain junction of required degree with access door (T-junction) . a) 110x110x110mm.

b) 75 x 75 x 75 mm.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. a) Sintex or quivalent

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. b) In a grating, frames, guard bar, ladders, railings, brackets, gates & similar works.

Ready made Plastic Septick tank (5 User)