Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Pol Store And Allied Works For Af Section At Afs Kumbhirgram in Lunglei, Mizoram, with an estimated contract value of Rs. 9,69,000. The bid opening date for this tender is 12-11-2026 and the last date for bid submission is 03-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Mizoram Tender

Opening Date12 Nov 2026
Closing Date3 Dec 2026
Tender Amount₹ 9,69,000 
Notes
Download

Costs

Description

Provn Of Pol Store And Allied Works For Af Section At Afs Kumbhirgram

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.

16.22

123

-

... More
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

6.24

106

-

... More
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

2.06

106

-

... More
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajja complete all as specified and directed.

0.11

173

-

... More
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

1.62

152

-

... More
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

4.56

140

-

... More
Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed.

54.65

106

-

... More
Material and labour for form work to pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular, or polygonal surfaces of concrete complete all as specified and directed.

23.24

106

-

... More
Material and labour for form work to sides and soffits of floor or roof beams, slab, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed.

15.62

123

-

... More
Material and labour for form work to chullah hoods, chajjas, troughs and similar items including edges with rough finished flat surfaces of concrete complete all as specified and directed.

1.23

123

-

... More
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

801.05

123

-

... More
All as per item No 14.00 above but 6mm to 10mm dia for stirrups, spacer, binders and -ditto-.

639.4

147

-

... More
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

11.94

152

-

... More
Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

4.3

149

-

... More
Materials and labour for sand filling under floors including watering and consolidation complete all as specified and directed.

1

149

-

... More
Supply and fix polythene film, black, 150micron laid in floors complete all as specified and directed.

13.4

152

-

... More
Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

13.4

152

-

... More
Material and labour for 30mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

13.4

109

-

... More
Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

26.36

109

-

... More
Material and labour for 10mm thick rendering in cement mortar (1:4) as in verticle surface/ skirting / dado complete all as specified and directed.

10.68

106

-

... More
Material and labour for machine cut Kota stone slab in vertical surface 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in dado/ skirting complete all as specified and directed.

10.68

109

-

... More
Material and labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

26.36

109

-

... More
Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

6.18

106

-

... More
Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

21.580000000000002

123

-

... More
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

49.05

106

-

... More
Material and labour for 10mm thick rendering in cement mortar (1:6) on fair faces of brick work and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

46.96

106

-

... More
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using water proofing coumpound (WPC) @ 2% weight of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

57.76

132

-

... More
Supply only integral water proofing compound complete all as specified and directed.

8.22

106

-

... More
Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed.

13.4

132

-

... More
Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

13.4

170

-

... More
Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

42.09

132

-

... More
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

57.76

147

-

... More
Material and labour for 15mm thick rendering in cement mortar (1:4) with using water proofing coumpound (WPC) @ 2% weight of cement or as per manufacturers instruction on roof top and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

28.3

147

-

... More
Material and labour for water proofing treatment to RCC roof surface comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer @ 0.30 liters per sqm confirming to IS 3384 over plastered surfaces of roof. (b) One layer of APP based polymeric membrane 3mm thick, weight not less than 3.50 kgs per sqm, reinforced with non woven polyester matt central core fabric (weight not less than 160 GSM) and coated on both side with and including layer of APP modified bitumen and finished with and including micro-prefabricated heat fusible polythene film on both surfaces. (c) Finally applying two coats of bituminous aluminum paint @ 0.10 ltrs per sqm per coat on top surface. Note:- (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions. Make of APP membrane:- Super Thermolay of M/s STP Ltd, Hyperplas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Danosa (India) pvt ltd, , M/s FOSROC Chemicals, Smartcare APP membranes of M/s Asian Paints Ltd.

28.3

103

-

... More
Material and labour for anti-termite treatement for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

13.4

145

-

... More
Material and labour for anti-termite treatement for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

6.18

106

-

... More
Supply and fix steel rolling shutters, thickness of laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed.

6.4

173

-

... More
Supply and fix safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

4

145

-

... More
Supply and fix ball bearing for rolling shutters complete all as specified and directed.

2

106

-

... More
Supply and fix 50 mm bore MS pipe (heavy grade) with all fitting and fixed complete to walls and ceilings complete all as specified and directed.

3

173

-

... More
Material and labour for cast iron work grade FG-150, machined, in pulleys and similar articles (articles n. exc 5 kg each) complete all as specified and directed.

10

173

-

... More
Materials and labour for cutting holes in brick walls bulit in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as required depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

8

140

-

... More
Supply and fix mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

4.2

140

-

... More
Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

8.28

106

-

... More
Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410 W (Gde E-250) quality-A complete all as specified and directed.

33.44

106

-

... More
Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

1.54

109

-

... More
Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in ramp including finishing the concrete surface even and rough complete all as specified and directed.

6.07

145

-

... More
Material and labour for flame proof light / light/ fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid steel conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing flame proof switches and fixing materials with one single core PVC insulated unsheathed multistranded FRLSH 1.5 sqmm (nominal area) copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for Each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix steel conduit and MS terminal box.

7

103

-

... More
Supply and fix LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

3

145

-

... More
Supply and fix flameproof cum waterproof LED bulk head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

3

106

-

... More
Supply and fix flame proof exhaust fan with louvers having sweep size of 400 mm having air discharge capacity of 1120 CFM complete with 0.25HP single phase 240V, 1440RPM capacity of motor duly approved and including cutting / making opening having dia of the hole for 400mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and directed.

1

173

-

... More
Material and labour for concealed flame proof submain wiring comprising single core , 2 runs of 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in heavy duty rigid steel conduit and its fittings complete including provision of 1 run 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and directed. Note :- (a) Cost for extra length of cables / wire required for connection to MCBs/DB's shall be included in quoted rates. 2. Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates.

15

145

-

... More
Supply and fix 3 way flame proof junction box 100mm dia (1 plug) complete all as specified and directed.

4

106

-

... More
Supply and fix flame proof On/Off switch rotary type with termination box in LM6, 16A, double pole 250V ( with termination box) complete all as specified and directed.

7

173

-

... More
Supply and fix SPN 4 way flameproof / weatherproof lighting distribution panel comprising incoming: MCB,2P,16A/25A- 1 No. and outgoing: MCB,1P,6A/10A- 2 Nos. with complete internal bus bar & wiring up terminals complete all as specified and directed.

1

173

-

... More
Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm, burried directly and preferably vertically in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to galvanized earth wire 4 sqmm by means of bolt, nut and washer of GI or steel earthing lead to be procted by GI pipe of dia 15mm bore (light grade) and other end connected to earthing test point or main controlled switch as directed including providing funnel with 20 mm bore GI pipe (medium grade) and wire mess for watering, charcoal or coke and common salt in alternative layer of 15 cm (compacted thickness) all around the earth electrode, concrete earth pit of size 300x300x300mm (internal dimensions) with wall thickness 50mm made of PCC (1:3:6) type C1 and 50 mm thick cover of size 400x400mm of precast RCC (1:2:4) type B1 reinforced with 8mm dia TMT bar @ 15 cm on both ways and with suitable handle made out of 10mm dia, including necessary excavation earth work , returning filling and disposal of surplus soil to a distance n. exc 50m and testing on complete connection all as shown in electric plate No- 3 SSR Part-I complete all as specified and directed. Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.

1

140

-

... More
Supply and fix 6 amp rating, SPN, 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

1

106

-

... More
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power cable (heavy duty with stranded aluminum conductor) of size 6 Sqmm, 4 core, 1100 Volts grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.

150

140

-

... More
Material and labour for sand cushioning with clean and dry river sand for protection of XLPE cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and directed. Note:- Punned down thickness shall be measured for payment.

3.78

106

-

... More
Supply and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

934

109

-

... More
Materials and labour for boring of holes of size upto 50mm dia under road without disturbing the top surface of the road and taxiway for passing through the cable including supply and laying 50mm bore (heavy grade) GI pipe in boring complete all as specified and directed Note-Necessary infrastructure required for boring shall by arranged by the contractor and cost of the same included in quoted rates.

6

114

-

... More
Supply and fix ISI marked dry chemical powder (ABC) type fire extinguisher of capacity 9 kg, portable type confirming to IS: 15683 and installation, maintenance & testing of extinguisher shall be as per IS: 2190 (latest version) complete all as specified and directed.

1

123

-

... More
Supply and fix ISI marked light weight squeeze grip type CO2 type fire extinguisher of capacity 4.5 Kg conforming to IS: 15683. and installation, maintenance & testing of extinguisher shall be as per IS: 2190 (latest version) complete all as specified and directed.

1

123

-

... More
Supply and fix ISI marked mechanical foam type fire extinguisher of capacity 9 Litres confirming to IS: 15683 and installation, maintenance & testing of extinguisher shall be as per IS: 2190 (latest version) complete all as specified and directed.

1

106

-

... More
Supply and fix fire bucket confirming to IS: 2546 complete all as specified and directed.

3

106

-

... More
Supply and fix fire bucket stand for 4 Nos bucket of suitable size complete all as specified and directed.

1

173

-

... More
Supply and fix single pointed air termination aluminium rod of 12 mm dia, 300 mm long having one end flat with one 10mm dia hole fixing on roof top including fixing / fitting of termination rod at one end of GI pipe 25 mm dia stand post with the help of nuts, bolts etc and making connection with roof / down conductors and including GI pipe 25 mm dia (light grade) as stand post of height 1 meter fixing with the help of GI bolts and making fixing arrangement of air termination rod over the GI pipe along with earthing strip etc. complete all as specified and directed.

1

140

-

... More
Supply and fix test point terminal block made of gun metal or phosphorous bronze of size 75x75x25 mm, drilled and screwed with 3 No. 8mm dia, 25mm long hex head screw for holding the phosphorous bronze plate including fastening / bolting the roof down conductor and earth electrode over the phosphour bronze plate with the help of copper nuts & bolts of suitable size and including providing one fibre sheet of size 15cm x 15cm x 10mm thick below the test point to avoid direct contact with wall and material and labour for enclosing the complete test point in MS sheet box openable from front side fabricated by MS sheet not less than 1.6mm thick duly painted with red paint and having locking arrangement complete all as specified and directed.

1

106

-

... More
Supply and fix GI strip of size 32 x 6mm over the wall at a height of 50 cm from floor (inside of hanger) by provisioning of porcelain insulator to be provided at an interval of 30 cm for supporting the GI strip including fixing and tightening through suitable bolts, nuts and washers made of brass / gun metal in such a manner that strip should not touch the wall including for making roof grid, down conductor for lightning protection system and connected to test point complete all as specified and directed.

10

106

-

... More
Material and labour for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) PCC block of size 300x300x150 mm to support GI pipe along with aluminium rod complete all as specified and directed.

0.11

123

-

... More
Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm, burried directly and preferably vertically in ground (earth pit not less than 2,25 m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to galvanized earth strip 32 x 6 mm by means of bolt, nut and washer of GI or steel earthing lead to be procted by GI pipe of dia 40 mm bore (light grade) and other end connected to earthing test point or main controlled switch as directed including providing funnel with 20 mm bore GI pipe (medium grade) for watering wire mess, charcoal or coke and common salt in alternative layer of 15 cm (compacted thickness) all around the earth electrode, concrete earth pit of size 300x300x300mm (internal dimensions) with wall thickness 50mm made of PCC (1:3:6) type C1 and 50 mm thick cover of size 400x400mm of precast RCC (1:2:4) type B1 reinforced with 8mm dia TMT bar @ 15 cm on both ways and with suitable handle made out of 10mm dia, including necessary excavation earth work , returning filling and disposal of surplus soil to a distance n. exc 50m and testing on complete connection all as shown in electric plate No- 3 SSR Part-I complete all as specified and directed. Note:- Earth strip upto 7.5m length including testing shall be included in quoted rates.

1

123

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.