Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repairs To Building Nos T 233 And Certain Revenue Work At Cijw School Vairengte Under Ge Silchar in Kolasib, Mizoram, with an estimated contract value of Rs. 43,00,000. The bid opening date for this tender is 08-01-2025 and the last date for bid submission is 29-01-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 86,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_692324_1Bid Award Id
ViewTender No
8893/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S&F MCB isolator TPN, 240V, 63A, 10kA, 50Hz, B curve complete all as specified and as directed
1
-
-
... More
S&F building security light, LED luminaire 25W IP 66 with LED lamp, driver, etc. with all accessories pre-wired and connecting with 3 core flexible copper conductor cable drawn through PVC conduit of size 20mm and taking down and disposing off old fitting complete all as specified and as directed
1
-
-
... More
S&F pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
235
-
-
... More
M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed
Note: Only punned thickness of sand shall be considered for measurement purposes
9.79
-
-
... More
Demolition of reed, lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and as directed
146
-
-
... More
Dismantling wall and ceiling boards (fibre, pulb, insulation, etc.) or insulation boards slabs/blankets of any thickness including cover fillets complete all as specified and as directed
115
-
-
... More
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed
280
-
-
... More
S&F shock proof, rust proof pole mounting junction box, 100A rated, heavy duty of size 139x119x70mm with 32A 4 way heavy duty terminal block, for street lighting system with all accessories and including 1No. MCB SP 10A heavy duty connectors, 4 terminals, with necessary mounting arrangements to pole with clamp, nut bolts, cable gland with cable entry, suitable lugs, etc. complete all as specified and as directed
Note: Sintex Industries Ltd / Supreme Industries / Naithani Plastic Moulding Works
12
-
-
... More
Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc. and disposing off complete all as specified and as directed
250
-
-
... More
S&F switch piano flush button type, single pole, ISI marked, one way 5A, 230V complete all as specified and as directed
51
-
-
... More
S&F switch socket combination outlet, 2 in 1, 5 pin, 5 A flush type, ISI marked, 240V complete all as specified and as directed
15
-
-
... More
Excavation in trenches not exceeding 1.5m wide and but not exceeding 3.0m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
45.3
-
-
... More
Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces
18
-
-
... More
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed
170
-
-
... More
S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed
40
-
-
... More
M&L for preparation of new plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungus resistant, dirt resistant, exterior paint (of approved tint, company depot tinted) with silicon additives @1.43litre/10sqm over a priming coat of exterior primer applied @0.90litre/10sqm complete all as specified and as directed
150
-
-
... More
M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded aggregates as in bases for floors, etc. finished fair and even complete all as specified and as directed
120
-
-
... More
B/R WORKS
-
-
-
... More
S&Fsteel water tubing, light grade, 40mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. including taking down old and making the disturbed suarfaces good,complete all as specified and as directed
14
-
-
... More
EXCAVATION & EARTHWORK
-
-
-
... More
S& in repairs 4mm dia GI wire fixed on walls by means of necessary fastening bolts or T shaped nuts & bolts, etc. complete all as specified and as directed
80
-
-
... More
M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders securing with clips complete all as specified and as directed
500
-
-
... More
M&L for mild steel TMT bars grade Fe-500D, 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
300
-
-
... More
Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces
10
-
-
... More
S&F LED linear light fitting, 1x20W, 220V AC decorative batten type, wall mounting with polycarbonate housing, integrated electronic driver, all accessories pre-wired including and 20WLED bulb/lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed
20
-
-
... More
S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W grade-E -250, quality 'B' complete all as specified and as directed
50
-
-
... More
S&F 3 way sliding anodised aluminium glazed window shutter with frame with the following specifications complete all as specified and as directed.
(a) Frame 50x65x1.5mm thick
(b) 35x35x1.5mm Z section in stiles, rails
(c) 50x35x1.5mm T section mullion
(d) PVC gasket and with 4.8mm thick coloured glass pane one side mirror finished, area not exceeding 0.5sqm each with aluminium handles and necessary locking arangements
(e) Stainless steel wire mesh for mosquito proofing arrangement all as directed
16
-
-
... More
M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
90
-
-
... More
S&F switch socket combination outlet, 2 in 1, 5 pin, 5 & 15A flush type, ISI marked, 240V complete all as specified and as directed
8
-
-
... More
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 200mm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 100mm but not exceeding 200mm wide complete all as specified and as directed
400
-
-
... More
S&F switch socket outlet, 5 pin, 5A flush type, universal, ISI marked, 230V complete all as specified and as directed
5
-
-
... More
S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down old damaged DB and disposing off complete all as specified and as directed
1
-
-
... More
M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
40
-
-
... More
Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed
74
-
-
... More
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
15.74
-
-
... More
M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed
Note: WPC will be measured and paid separately under respective item herein
150
-
-
... More
E/M WORKS
-
-
-
... More
S&F false ceiling with anodised aluminium snap grid frame work for false ceiling comprising of perimeter channel 0.55mm thick with 2Nos. unequal flanges of 20 & 30mm and web 27mm fixed to surrounding wall using nylon sleeves at 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m in length) of 0.55mm thickness, having curled web of 50mm and flange 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips at 457mm c/c to 6mm dia GI hangers (1.2m long) adjusting level fixed to roof slabs by means of ceiling cleats made of GI flat 40x3mm, 60cm long and expansion hold fasteners 12.5mm dia 40mm long including 4mm thick pre-painted decorative non-asbestos fibre cement building boards fixed with screws / laid / inserted on snap grid complete all as specified and as directed
95
-
-
... More
S&F MCB SP, 240V, 6 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed
4
-
-
... More
Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed
4.8
-
-
... More
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed
20
-
-
... More
M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 2.5sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 20mm wide, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed
Notes: (i) 2 runs of 4sqmm main cable, 1 run of earth conductors and 1 run of PVC conduit shall be measured as one length
(ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire
(iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site
80
-
-
... More
M&L RCC M 25 design mix as in columns, pillars, posts, etc. complete all as specified and as directed
3
-
-
... More
M&L for preparation of new masonry / concrete wall surfaces and applying two coats of acrylic distemper over a coat of alkali resistant wall primer including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed
250
-
-
... More
M&L for brickwork with sub-class 'B' bricks (old size bricks), straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed
13
-
-
... More
One light point, ceiling fan / exhaust fan point/bell controlled by one 5A one way switch
46
-
-
... More
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed
23
-
-
... More
M&L for rubber moulded reflective type chequered cement concrete tiles 300x300x25mm thick, set, jointed and pointed in neat grey cement slurry mixed with pigment to match colour of tiles as in floors, including 15mm thick screed bed in CM (1:6) (rate shall be included) complete all as specified and as directed
120
-
-
... More
One switch socket outlet 3 pin 5A controlled by one switch on independent board
15
-
-
... More
Dismantling of old UNSV main switches, Dbs , MCB enclosure, electric meter, PVC rectangular blocks etc and keep in safe custody either for reuse or for disposal including making good to the disturbed surafce of wall, complete all as specified and as directed
3
-
-
... More
Supply, installation, commissioning and testing CPRI approved LT feeder pillar panel, outdoor type of size 1000x800x500mm recommended by CPRI approved manufacturer, cubical floor mounted type (IP-65 degree of protection) made out of 3.15mm thick powder coated CRCA sheet , with aluminium strip bus bar 400A rating duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415V 50Hz AC supply, including cable entry boxes, cable gland, with 50x50x6mm angle iron supports, bottom portion duly grouted in PCC foundation as per manufacturer's instructions totally tested as per IEC 61439-I including the following switchgears complete all as specified and as directed
Incoming
(a) MCCB 125A, 4 pole, 25kA, 415V Icu=100%Ics- 01Nos (b) LED indicating lamp R-Y-B - 03 Nos
Outgoing (a) Through bus bar
2
-
-
... More
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed
72
-
-
... More
M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:
-
-
-
... More
M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 2.5sqmm and 1 run of 2.5sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 20mm wide, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed
Notes: (i) 2 runs of 4sqmm main cable, 1 run of earth conductors and 1 run of PVC conduit shall be measured as one length
(ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire
(iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site
81
-
-
... More
S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed
40
-
-
... More
Notes for serial item Nos. 35 & 38: (a) Mix design shall be conforming to relevant IS. Design mix shall be got designed from National Test House, SEMT Wing CME, Regional Research labs, IITs, National Institutes of Technology, Command Test Laboratory and Govt Engineering Collage and shall be got approved by the GE. Cost of obtaining design mix shall be included in the quoted rates
(b) The Contractor shall use only one type brand of cement for entire structural/reinforced concrete work. In the event of contractor desiring use of any different brand of cement, fresh design mix shall be
carried out and submitted for approval without any extra cost to the Govt.
(c) Reinforcement steel will be measured separately under respective items herein
-
-
-
... More
M&L rendering 15mm thick, in cement mortar (1:6) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
250
-
-
... More
M&L RCC M 25 design mix as in foundations including rafts, footings, foundation beams, plinth beams, column footings, under reamed piles, mass concrete, etc. complete all as specified and as directed
6.5
-
-
... More
S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed
40
-
-
... More
S&F 250W LED flood light fitting, pressure die cast aluminium housing with heat resistant toughened glass, IP-66 protection luminaries with 250W LED lamp, complete all as specified and as directed
21
-
-
... More
M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as foundation filling, mass concrete, etc. complete all as specified and as directed
6
-
-
... More
M&L for taking down unserviceable ceiling fans/exhaust fan/wall mounted of any type from existing location and setting aside or depositing at AGE E/M store including all loading, unloading, carting, etc. as required and refixing in existing location after building repair works are done including cleaning the fans, oiling, greasing and providing new check pins, connecting wire, etc. and confirm serviceability complete all as specified and as directed
15
-
-
... More
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
1000
-
-
... More
M&L RCC M 25 design mix as in beams, cantilevers, lintels, etc. over 1.5m long complete all as specified and as directed
3
-
-
... More
S&F 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification complete all as specified and as directed
(a) Ventilator frame 2 track of size 60x25x1.5mm thick
(b) Stiles and rails of size 35x25x1.5mm
(c) 35x35x1.5mm T section mullion
(d) PVC gasket with 4mm thick tinted glass, including aluminium handles with necessary locking arrangement
6
-
-
... More
S&F electronic fan regulator, stepped socket type (5 steps), 100W, 50Hz, 230V, ISI marked duly connected up complete all as specified and as directed
7
-
-
... More
M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed
1
-
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed
182
-
-
... More
S&F heavy duty, PVC body with PVC blades, legs, AC, single phase, ISI marked energy efficient, 240V exhaust fan, 250mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts complete all as specified and as directed
8
-
-
... More
S&F 140mm floor door stopper aluminium alloy body and tongue, anodized with hard drawn steel spring fixed on floor complete all as specified and as directed
11
-
-
... More
M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in bed blocks, back filling of steel frame and holdfasts, etc. including necessary formwork complete all as specified and as directed
0.1
-
-
... More
S&F LED bulb 10W, 5 star rated, B-22 CDL and connecting to lamp holder including taking down and disposing off old bulb / lamp complete all as specified and as directed
Make: Crompton, Phillips, Wipro, Surya, Havells, Bajaj
6
-
-
... More
S&F sheet metal enclosures for 4 way MCB DB, 415V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall, complete all as specified and as directed
1
-
-
... More
Supply, erect in position and fixing steel tubular swaged poles with CI base plate (300x300mm and 6mm thick), finial taper plug, pole caps, bolts, nuts and screws type 410 SP-31, 9m long, conforming to IS: 2713, with detachable bracket arms including painting with two coats of bituminous paint upto 1.5m from ground and two coats of aluminium paint over a shop coat of primer to remaining portions at any locations including taking down old unserviceable pole and disposing off complete all as specified and as directed
Note: Excavation / earthwork and PCC coping etc. will be measured and paid separately under respective items herein
12
-
-
... More
S&F bulk head fitting LED, 10W, with pressure die cast housing, acrylic diffuser with frame and connecting accessories and connecting up complete all as specified and as directed
4
-
-
... More
M&L for preparation of masonry / concrete wall surfaces and applying 1mm thick (in two layers) weather proof wall care putty including all necessary staging, scaffolding, etc. as required to work at heights (approx 9m), etc. complete all as specified and as directed
150
-
-
... More
M&L for glazed ceramic tiles, coloured, of sie 450x300x7mm or 350x250x7mm thick of superior quality as in skirting, dado, etc. laid over 10mm thick backing coat in CM (1:4) (rate shall be included) pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
6
-
-
... More
S&F PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed
6
-
-
... More
Supply and laying burnt bricks of sub-class 'B' designation 75 laid in trenches for cable protection complete all as specified and as directed
1200
-
-
... More
Notes for serial item No.100: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included
(ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge
-
-
-
... More
Taking down old unserviceable submain wiring of any type, any size, from any location or position and disposing off including making good the disturbed surfaces, etc. complete all as specified and as directed
30
-
-
... More
Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed
30
-
-
... More
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
15
-
-
... More
M&L for preparation of masonry / concrete wall surfaces and applying 1mm thick wall care putty in two layer rubbed with sand paper for making surface smooth and even including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed
250
-
-
... More
S&F in repairs 25mm dia fancy type chromium coated (tint as approved) MS curtain / drapery rods, etc. of rod wall thickness 1mm (min), including pair of CP MS brackets, holders with funnel at ends complete all as specified and as directed
35
-
-
... More
S&F in repairs 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
10
-
-
... More
S&F 100mm long stainless steel butt hinges of selected quality, with stainless steel hinge pin fixed with stainless steel screws complete all as specified and as directed
60
-
-
... More
S&F MCB isolator SPN, 240V, 40A, 10kA, 50Hz, C curve complete all as specified and as directed
1
-
-
... More
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed
17.45
-
-
... More
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed
52
-
-
... More
S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-240 complete all as specified and as directed
1975
-
-
... More
Notes for serial item Nos. 35 & 36: (a) Area of opening shall only be considered for meaurement purposes (b) All necessary accessories including tinted glass, PLPB, fittings, fixtures for assembling / fixing as per drawing complete shall be included in the quoted rate
-
-
-
... More
S&F factory made solid PVC wire gauged door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified and as directed
16
-
-
... More
S&F fan hook fabricated in MS flat iron 40x6mm 300mm long, bent to shape with drilled holes to accommodate nuts suitable for hanging ceiling fans, entirely painted with two coats of synthetic enamel paint complete all as specified and as directed
7
-
-
... More
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
29.94
-
-
... More
S&F factory fabricated solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed
16
-
-
... More
M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed
8
-
-
... More
One switch socket outlet 3 pin 5A controlled by one switch on same board
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements