Border Security Force Tender

Providing, Installation, Testing and Commissioning of Polycrystalline silicon Solar PV Module of 10KWp (330 watt each) with mounting structure for the solar panel on top of roof/On- ground having Efficiency = 13%, Fill factor = 70% , module frame made of Non-corrosive and electrolytically compatible with the mounting structure material, 02 Nos chemical earthing, Termination box made of Thermo-plastic, IP 65, UV resistant, Schottky type Blocking diodes i/c mounting structure connecting wire etc as req (make like: Su-kam/TATA-BP/Usha solar or similar make of MNRE approved firm)

Providing, Installation, Testing and Commissioning of 12 V 200 AH tubular battry having min Warranty 60 Month, Approx Dry Weight with rack etc as req (make: SUKAM Bazooka 200AH Battery/TATA/Amron/Usha or similar make )

Providing, Installation, Testing and Commissioning of MPPT Technology based Solar PCU Rating 10 KVA Power device including all cables having IGBTs cum MOSFETs Input Parameters Nominal I/P Voltage 120V Input Voltage Range 110 V- 130V ±2% Low Battery cut off 110V ±2% High Battery shutdown 130V ±2% Output Parameters Voltage Regulation at nominal voltage 230 ± 5% Frequency Regulation 50Hz ± 0.2Hz Efficiency (typical)at linear load 85% (linear load) Waveform pure Sine Wave Total Load 8 kW@UPF Overload 200% for 8seconds THD (on Linear Load) 3% (linear load)Power usage Priority from Photovoltaic Array Crest Factor 3:1 GRID CHARGER Grid I/P voltage Range WW-155 VAC-280VAC±10V and NW-185 VAC-265VAC±10V Charging Current Max. 30Amp + 2Amp ( Factory settable)SOLAR CHARGE CONTROLLER Type Series Regulator Common Negative Maximum I/P PV Voltage 25V Per 12V Solar Panel Solar Array Single Array Charging Current Imax 20A Bulk Voltage 57.6V ±2%V Adjustable Bulk Voltage PV Charge Controller Rating 10KWp 110 V-130 V float Voltage 120 V ±2% Operating Temp 0°C to + 45°C Storage Temp 0°C to + 55°C Acoustic noise 60dB Relative Humidity 0-95% Non-Condensing Dimension 351 x 617 x 320 mm Weight 35 kg Pure sine wave output, In-built heavy duty Solar charge Controller, Grid charging enable disable option, Solar and Grid charging current sharing for maximum solar usage - User set-able Solar Mains Battery (SMB) and Solar Battery Mains (SBM) operations , Battery low protection,- Battery over voltage shutdown, Over temperature and overload protection , Short circuit protection,- Reverse polarity protection by internal fuse,Displays-- Display showing PV & Inverter output,- LCD showing various input and output parameters/c connection etc as req. (make like: Su-kam-SUPCU-2000-48V/TATA-BP solar/Vispra/UTL or similar make of MNRE approved firm)