North Eastern Indira Gandhi Regional Institute Of Health And Medical Sciences Tender

Providing, fitting and fixing coloured anodised aluminium partition walls of standard sections, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels (f ) Nepal Board / Bhutan Board/ prelaminated Board

Providing and fixing anodised aluminium framed single leaf door with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dry set rubber gasket, etc. complete as directed by the Department at all levels (c ) 5mm plain frosted glass

Providing and fixing anodised aluminium framed single leaf door with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dry set rubber gasket, etc. complete as directed by the Department at all levels (f ) Nepal Board / Bhutan Board/ prelaminated Board

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels (Glass panes included, Cement concrete to be measured and paid separately) (a) Side hung and Top hung openable windows and ventilators (i) 5mm clear glass

(iii) 5mm frosted glass

Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (e) Butt hinges (iv) 100mm x 63mm x 3.2mm

Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete. (bright natural matt & satin finished) (j) Door Latches (ii) 250mm x 16mm x 5mm

Brick nogged wall with 1st class brick in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately) (a) Half Brick (~112 mm) thick 1st class brick nogged wall (i) In proportion 1:3

Brick work in cement mortar with 1st class brick including racking out joints and curing complete in super-structure above plinth level upto 1st floor level including dewatering if necessary as directed (a) In proportion 1:3

Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items: (e) Flat surfaces such as soffits of suspended floors, roofs, landings, cantilevel slabs, chajjas, balconies and the like (i) thickness of floors / slab upto 200mm

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required) a) From Primary Sources like TATA/ SAIL/ ESSAR/ JINDAL/ SHYAM/ RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

Providing and laying Concrete in Reinforced Cement Concrete Works using Concrete Mixture Machine with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) 1. In Foundation and sub - structure including footing, columns with base, tie and plinth beam, pile cap, raft slab, base slab, RCC walls, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to Plinth Level.(Without using admixture, plasticiser) (a ) M15 or prop 1:2:4 (for non structural works)

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) (a) In prop. 1:3:6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)

Providing Ceramic Tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pidilite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of tiles, complete at all levels as specified and directed (cement plastering to be measured and paid separately) 1 Normal range (sizes 300mmx300mm and above) (b) Premium Range

Providing polished ceramic wall tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pidilite / Rouf) or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately) 1 Executive range- 1 (Sizes 200 mm x 300mm and above) (b) Premium Range

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pidilite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department) (b) Executive Quality

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed a) In cement mortar 1:3

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using iron hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. Using TATA make Circular Hollow section of Grade YST-310 conforming to I.S. Specification : 1161-1998

Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. (a) In beams and joists fitted independently without connecting plates (b) In flat up to 25mm thickness

(c ) In M.S. angles, channels, Tees etc

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter (a) Surfaces over 100mm in width or girth (i) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) with necessary wood screws (b) Non-decorative type face panels and block board core (i) 40 mm thick

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) (a) White (i) Normal

Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (a) White (i) Normal

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1 BASIN (PEDESTAL TYPE) (a) White (i) Normal

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (a) Single Bowl (24 in. x 18 in)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified (G.I. & C.P. pipes will be measured separately) (a) Bib cock short body

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified (G.I. & C.P. pipes will be measured separately) (a) Long body bib cock with wall flange

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (e) 15mm dia, (Angular)

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1 cement: 3 coarse sand: 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1 cement: 1 coarse sand: 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed

Supplying fitting and fixing CPVC Pipes with all necessary fittings of SUPREME/ PRINCE/ SFMC/ FUSION brand or equivalent, in exposed or in trenches including trenching and refilling the same etc. complete as directed (f) 50mm diameter

(i) 100mm diameter

Supplying, fitting and fixing of Water storage tank PCVC ISI Marked, complete as directed. (Excluding Civil Works)

Supplying, fitting, fixing M/F Suspended Ceiling with G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm c/c; and suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of size 25mm x 10mm x 0.55mm fixed to soffit with G.I. cleat and steel expansion fasteners; Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are to be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c; fixing 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) to ceiling section with 25mm long drywall screws at 230mm c/c. and boards to be joined by filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard so as to have a flush look and painting where necessary (one coat primer and two coats of paint) complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators, etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary) (b) 12.5mm thick

Providing Pre Painted Galvalume Sheet Roofing (PPGL) (Dyna roof/ Sathyam/ Century Wells/ Wonder Roof/ DuraKolor make or equivalent) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) (c) 0.50 mm thick

Supply, fitting, fixing G I all ;threaded nipple as per approved quality of the department including jointing materials and carriage of materials within 8 KM complete as directed (Medium quality) (063 25mm dia

Supply, fitting, fixing G I all ;threaded nipple as per approved quality of the department including jointing materials and carriage of materials within 8 KM complete as directed (Medium quality) (06) 50mm dia

Supply, fitting, fixing G I all ;threaded nipple as per approved quality of the department including jointing materials and carriage of materials within 8 KM complete as directed (Medium quality) (09) 100mm dia

Supply fitting fixing G I reducing tee as per the approved quality of the department including cutting and threading the pipes and jointing materials and carriage of materials within 8 Km all complete as directed (Medium quality) (09) 40 x 25 mm dia

Supplying, fitting, fixing GI Union socket as per the approved quality of the departmenbt including jointing materials and carriage of materials within 8 KM all complete as directed (Medium quality) (12.03) 25 mm dia

Supplying, fitting, fixing GI Union socket as per the approved quality of the departmenbt including jointing materials and carriage of materials within 8 KM all complete as directed (Medium quality) (12.05) 40 mm dia

Supply, fitting, fixing GI Elbow as per approved quality of the department including jointing materials and carriage of materials within 8 KM complete as directed (Medium quality) (2.03) 25mm dia

Supply including carriage within a distance of 8 KM fitting, fixing brass foot valve with strainer including supplying of nuts, bolts, 3mm insertion sheet, washer and all other jointing materials etc complete as directed (IS 40389 - 1967) (8.03) 25mm dia

Laying of G I pipes in trenches including carriage of pipes from stock yard to the site within a distance of 8 K M except socket joints, all fittings required for the work will be paid extra as per current schedule of rates. Trenching and earth filling is also exclusive and shall be paid extra (Medium quality) (1.03) 25mm dia

Supplying fitting and fixing complete water pump set single phase 230 volt grade (a) 1 HP single phase