North Eastern Indira Gandhi Regional Institute Of Health And Medical Sciences Tender

Providing and fixing clear sheet glass bedded in putty and fixed with/without wooden beading including necessary cutting of glass to the required size (payment for wooden bead shall be made separately) (c) 5.00mm thick (Area of glass panes exceeding 1200 sq.cm but less than 2000 sq.cm)

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b) Overhead shower (Chrome Plated) (ii) Medium

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed (b) 3 in 1 (ii) Medium

Providing Ceramic Tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pidilite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of tiles, complete at all levels as specified and directed (cement plastering to be measured and paid separately) 1 Normal range (sizes 300mmx300mm and above) (b) Premium Range

Providing polished ceramic wall tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pidilite / Rouf) or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately) 1 Executive range- 1 (Sizes 200 mm x 300mm and above) (b) Premium Range

Providing, fitting and fixing CP towel rail complete as directed and specified (a) Without Hook (i) Normal

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified (b) Wall Soap tray

Supplying, fitting, fixing M/F Suspended Ceiling with G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm c/c; and suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of size 25mm x 10mm x 0.55mm fixed to soffit with G.I. cleat and steel expansion fasteners; Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are to be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c; fixing 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) to ceiling section with 25mm long drywall screws at 230mm c/c. and boards to be joined by filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard so as to have a flush look and painting where necessary (one coat primer and two coats of paint) complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators, etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary) (b) 12.5mm thick

Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (b) Tower Bolt (ii) 250mm x 12mm

(c ) Door Handle (ii) 100mm

(e) Butt hinges (ii) 75mm x 45mm x 3.2mm

(m) Mortice Locks vertical type (iv) Aldrop with inbuilt Lock-6 lever kadi tala (Godrej make)

(r ) Curtain rod (ii) 25mm x 2mm thick

Wall painting (one coat) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on old wall surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth

Extra over item no 15.42 above for every subsequent coat of wall painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Brick work in cement mortar with 1st class brick including racking out joints and curing complete in super-structure above plinth level upto 1st floor level including dewatering if necessary as directed (a) In proportion 1:3

15 mm thick Cement plaster in single coat on fair side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed a) In cement mortar 1:3

Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm pre-laminated boards (50% glazed - 50% laminated) and providing and fixing handles, angle cleat, rubber gasket, roller bolting device, screws as required complete as specified and directed for all levels (Glass panes included) (b) With 5mm thick glass panes

roviding fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified

Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (a) White (i) Normal

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required) a) From Primary Sources like TATA/ SAIL/ ESSAR/ JINDAL/ SHYAM/ RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items: (d) Sides and soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties (i) for depth not exceeding 1.0M

Providing and laying Concrete in Reinforced Cement Concrete Works using Concrete Mixture Machine with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) 3.In Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase etc. above plinth level upto 1st floor level (Without using admixture, plasticiser) (a) M15 or Prop. 1:2:4 (for non-structural works)

FRP FLUSH DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) flush door shutter in different plain colour of FIBREWAYS made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around with suitable blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel , casted monolithically with testing parameters of FRP laminate confirming to table -3 IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge

FRP FRAME providing & fixing of factory made Fibreglass Reinforced Plastic (FRP) door frame of FIBREWAYS having three legged of cross section 90mmx45mm having single rebate of 32 mmx15mm to receive shutter of 30 mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat .Door frame laminate and shall be filled with suitable wooden block in all the three legs the frame shall be covered with covered glass from all sides. MS stay shall be provided at the bottom to steady the frame