North Eastern Indira Gandhi Regional Institute Of Health And Medical Sciences Tender

Brick work in cement mortar with 1st class brick including racking out joints and curing complete in super-structure above plinth level upto 1st floor level including dewatering if necessary as directed. (a) In proportion 1:3

15mm thick cement plastering in single coat in rough side of single or half brick walls for plastering upto 1st floor level including arises etc complete as directed (i) In cement mortar 1:3 5.8 Extra over item no 5.1 to 5.7 for interior plastering above 1st floor level for every addl. floor or part thereof including curing complete as directed. a) On Single coat plaster

15mm thick cement plastering in single coat in rough side of single or half brick walls for plastering upto 1st floor level including arises etc complete as directed 5.10 Extra over item no 5.1 to 5.7 for exterior plastering for every addl floor or part thereof beyond 1st floor level including curing complete as directed a) On single coat plaster

Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth

Providing Ceramic Tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pidilite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of tiles, complete at all levels as specified and directed (cement plastering to be measured and paid separately). 3.25.1 Normal range (sizes 300mmx300mm and above) (b) Premium Range

Providing polished ceramic wall tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pidilite / Rouf) or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). 3.26.1 Executive range- 1 (Sizes 200 mm x 300mm and above) (b) Premium Range

Providing and fixing anodised aluminium framed single leaf door with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dry set rubber gasket, etc. complete as directed by the Department at all levels. (c) 5mm plain frosted glass

Providing and fixing anodised aluminium framed single leaf door with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dry set rubber gasket, etc. complete as directed by the Department at all levels (f) Nepal Board/ Bhutan Board/ Pre laminated Board

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) with necessary wood screws. (a) Decorative type face panels and block board core (ii) 35 mm thick

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels (Glass panes included, Cement concrete to be measured and paid separately). (a) Side hung and Top hung openable windows and ventilators (ii) 6mm clear glass

Providing, fitting and fixing coloured anodised aluminium partition walls of standard sections, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (b) 6mm clear glass

Providing, fitting and fixing coloured anodised aluminium partition walls of standard sections, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting devicescrews etc. at all levels. (f) Nepal Board/ Bhutan Board/ Pre laminated Board

Providing, fitting and fixing coloured anodised aluminium partition walls of standard sections, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting devicescrews etc. at all levels. (c) 5mm frosted glass

Brick nogged wall with 1st class brick in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately) (a) Half Brick (~112 mm) thick 1st class brick nogged wall (i) In proportion 1:3

Supplying, fitting and fixing in position steel reinforcement bars upto 1st floor level confirming to I.S specification for RCC/RB work etc complete (a) From primary sources like TATA/SAIL/JINDAL etc (i) TMT Corression Resistant Steel (CRS)

Supplying, fitting and fixing in position steel reinforcement bars upto 1st floor level confirming to I.S specification for RCC/RB work etc complete (c) ISI approved mild steel reinforcement bar (M S bar) (i) TMT Corression Resistant Steel (CRS)

Providing and laying concrete in R.C.C work using conacte mixture machine with course sand and 20mm dowm graded stone aggregates including dewatering if necessary and curring complete as diretced 1. In Foundation and sub - structure including footing, columns with base, tie and plinth beam, pile cap, raft slab, base slab, RCC walls, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to Plinth Level. (Without using admixture, plasticiser) (a) M15 or Prop. 1:2:4 (for non-structural works)

Providing and laying concrete in R.C.C work using conacte mixture machine with course sand and 20mm dowm graded stone aggregates including dewatering if necessary and curring complete as diretced 2.5.3 In Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase etc. above plinth level upto 1st floor level. (Without using admixture, plasticiser) (a) M15 or Prop. 1:2:4 (For Non-structural Works)

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pidilite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department) (b) Executive Quality

Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items: (e) Flat surfaces such as soffits of suspended floors, roofs, landings, centilever slabs, chajjas, blconies and the like (i) Thickness of floors/ slab upto 200mm

Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items: (c) Columns, Pillars, Posts & Strut (i) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section, (ii) Rectangular Hollow section of specification RSH/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 and (iii) M.S. black-tube of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. Using TATA make Rectangular/ Square Hollow section of Grade YST-310 conforming to I.S. Specification : 4923- 1997

Providing Pre Painted Galvalume Sheet Roofing (PPGL) (Dyna roof/ Sathyam/ Century Wells/ Wonder Roof/ DuraKolor make or equivalent) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) (e) 0.60 mm thick

Supplying, fitting, fixing M/F Suspended Ceiling with G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm c/c; and suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of size 25mm x 10mm x 0.55mm fixed to soffit with G.I. cleat and steel expansion fasteners; Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are to be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c; fixing 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) to ceiling section with 25mm long drywall screws at 230mm c/c. and boards to be joined by filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard so as to have a flush look and painting where necessary (one coat primer and two coats of paint) complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators, etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary) (b) 12.5mm thick

Providing and fixing particle board / block board shutters for cupboards including black enamelled M.S butt hinges (75mm x 40mm x 1.12mm) with necessary wood screws complete as directed. (b) With 19mm/20mm thick Teak wood particle board

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1 BASIN (PEDESTAL TYPE) (a) White. (i) Normal

Providing fitting & fixing laboratory sink with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. (a) White (i) Size 450 x 300 x 150

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (a) 15mm dia Male/Female (long thread)

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) (a) Normal

Supplying fitting and fixing G.I.Pipes(TATA/ SAIL/ NEZONE and their equivalent) with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L. as directed and specified. (a) Exposed on wall - (iv) 25 mm dia

Supplying, fitting and fixing PVC pipes/ bends/ Junctions etc. of Supreme/Prince or other ISI approved make, including joining ,fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified. 1. PVC pipes of 6 Kg/cm2 as directed and specified. (d) 75mm dia

Supplying, fitting and fixing PVC pipes/ bends/ Junctions etc. of Supreme/Prince or other ISI approved make, including joining ,fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified. 2. 87.5 degree PVC bend as directed and specified (d) 75mm dia

Supplying, fitting and fixing C.P. pillar cock 15mm dia as directed. (a) Normal type