North Eastern Electric Power Corporation Limited Tender

Modular desking solution part 4 , Over all size of U SHaoe table should be 2350mm 7600mm. Worksurface Made of 36mm thick MDFone side prelaminate board conforming to IS14587 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes as shown above. Understructure The understructure consist of mixture of 18mm and 25mm Thick Prelaminated twin board of E1 P2 grade and approved shade conforming to IS 128231990Edge banded with matching 2 mm thick PVC lipping Aluminium alloy 63400 WP profile is used for connecting panels together Made of 18mm Thick Pre laminated twin board of E1 P2 grade and approved shade conforming to IS 12823 1990 Edge banded with matching 2 mm thick PVC lipping Wire management An array of panels made of 0.8mm and 1.2 mm CRCA MS IS 513 epoxy polyester powder coated DFT 40 to 60 microns is used for flow of wires and cablesCutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat Product should be certified with IAQ Gold Green guard by UL GRIHA and Green PRo.OEM SHould be a valid member of BIFMA and should have aleast 15 Fifteen products in BIFMA Compliance Registry

Chair with high back , High Back Chair back Size should be 47.5cm W 77cm D Seat size should be 47.6cm W 49.2cm D Seat Assembly should be Cushioned seat made of injection molded plastic inner and outer upholstered with pure leather and moulded High Resilience Polyurethene foam of density 45 kg m3 and hardness load 16KGF as per IS 7888 for 25percent comression. BAck assembly should be cushioned made of PU Foam with insitu molded MS ERW round tube of size 1.6cm 0.16cm upholstered with pure leather. Armrest is molded PU upholstered in pure leather adustable upto 6.5 cm in 5 steps. Armrest should be mounted on to a drop lift adjustable type tubular armrest support made of MS ERW Tube having chrome plated finish Chair should be equiped with Active Biosynchro Mechanism The adjustable tilting mechanism is designed with the following features 360 revolving type Front pivot for tilt with feet resting on ground and continious lumber ensuring more comfort Tilt tension Adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angel to the chair Seatand back tilt ratio of 1is to 2 The mechanism housing is made up of HPDC Aluminium and back powder coated Seat depth should be integrated in the seat though sliding mechanism with range 6 cm Back frame should be connected with up dn mechanism housed in plastic spine back support can be adjusted in the range of 7 cm The pneumatic height adjustment should have adjustment stroke of 10 cm The pedestal should be high pressure die cast polished Aluminium fitted with 5Nos twin wheel castors Manufacturer should be certified with ISO18001 ISO 9001 ISO 14001 and a member of BIFMA Manufacturer should be certified with ISO18001 ISO 9001 ISO 14001 and a member of BIFMA Product Should be Cerified by BIFMA Level 2 ans greenguard UL Green pro