Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Bldg No P-306 (rect Living) At 58 Gtc And Provn Of Tiling And Path With Covered Shed Of Bldg No At-2 Of Aps At 58 Gtc And Provn Of Faucet Sprayer In Toilet Of Jcos/or Md Accn At 58 Gtc And Carrying Out Dem Bldg No G-9 And G-10 And G-11 in East Khasi Hills, Meghalaya, with an estimated contract value of Rs. 46,58,000. The bid opening date for this tender is 15-05-2025 and the last date for bid submission is 17-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date15 May 2025
Closing Soon17 Jun 2025
Tender Amount₹ 46,58,000
Costs
EMD
₹ 93,160Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_708412_1Tender No
GE/SHL/TOKEN-05 OF 2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of stone slabs and tiles of anydescription or thickness in floors, aprons etc. laid bedded and pointed in any mortar including removal of rubbish from site complete all as specified and directed.
5.72
-
-
... More
Demolition of cement concrete( unreinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removal of rubbish from site complete all as specified and directed.
1.14
-
-
... More
Dismantling of posts or struts ( wood, steel, RCC) embeded in concrete any section including taking out of embeded portion and making good disturbed ground complete all as specified and directed.
456.15
-
-
... More
Dismantling of timber scantling 40 sqcm and over in section in any position ( unframed ) work complete all as specified and directed.
137.6
-
-
... More
Dismantling of timber fillets, nails post rafters purlins etc. under 40 sqcm in section in unframed work complete all as specified and directed.
6893.42
-
-
... More
Dismantling timber boarding of any description fixed in any position with nails complete all as specified and directed.
347.91
-
-
... More
Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
3118
-
-
... More
Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
1426.4
-
-
... More
Dismantling wall and ceiling boards (fibre, pulp, inslulation etc.) or insulation boards/slabs/blankets, any thickness inlcluding cover fillets complete all as specified and directed.
2213.96
-
-
... More
Demoltion of read lathing single, double, inluding bottom and plaster or chicken wire lathing complete all as specified and directed.
3305.13
-
-
... More
Taking down chowkhats with shutters (without taking of shutter for frames) n. exc. 1.5 sqm each complete all as specified and directed.
178
-
-
... More
Ditto- as item no 14 here in above but exc. 1.5 sqm and n. exc 4.0 sqm each.
114
-
-
... More
Taking down shutters of any description exc. 1 sq.m and n exc 2 sqm each complete all as specified and directed.
94
-
-
... More
Taking down shutters of any description n. exc. 1 sq.m each complete all as specified and directed.
292
-
-
... More
Taking up or down 20 mm dia steel tubing and connections, inluding cleaining for re-fixing or removal to store complete all as specified and directed.
235
-
-
... More
Ditto- as item no 18 here in above but 15 mm in dia pipe.
147
-
-
... More
Ditto- as item no 18 here in above but 25 mm dia pipe.
28
-
-
... More
Dismantling water tanks n. exc 250 liters each and removal from site complete all as specified and directed.
14
-
-
... More
S&F MS flat iron such as small articles for hold fast and similar work complete all as specified and as directed.
40.32
-
-
... More
M&L PCC (1:2:4) type B1 (20mm graded Aggregate) for fixing hold fast complete all as specified and directed.
0.7
-
-
... More
Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
0.23
-
-
... More
Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.
14.4
-
-
... More
Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
12
-
-
... More
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.
56.4
-
-
... More
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
16.8
-
-
... More
S & F Anodised aluminium frame Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
165
-
-
... More
S&F Anodised aluminium window and ventilator shutters Powder Coating (minimum thickness of powder coating 50 micron), side hung/ Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
60
-
-
... More
S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.
6
-
-
... More
S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.
54
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
11.2625
-
-
... More
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed
1325
-
-
... More
M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over a one coat of red oxide exc 10cm width or girth all as specified and directed.
168.16
-
-
... More
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
25.92
-
-
... More
Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed.
72
-
-
... More
Supply and fixing 200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
24
-
-
... More
Supply and fixing 150mm size Aluminium handles, cast type, anodised complete all as specified and directed.
48
-
-
... More
Supply and fixing 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,ISI marked, complete all as specified and directed.
6
-
-
... More
Supply and fixing 150mm size Aluminium anodised, barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
24
-
-
... More
S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
12
-
-
... More
S & F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples comlete all as specified and as directed.
5
-
-
... More
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples comlete all as specified and as directed.
48
-
-
... More
Forming jambs, etc. to openings in CM 1:6, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.
2.4
-
-
... More
M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
9.5
-
-
... More
M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and as directed.
45
-
-
... More
M&L for water proofing treatment to RCC roof slab/sunken floor, including parapet comprising with the following courses of treatment/specification from bottom to top:-
(i) Taking out old roof treatment and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc.and applying cement slurry @3kg/Sqm
(ii) Screed bed or bedding layer of mortar 1:4 in 15 mm thick for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items)
(iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.
(iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.
(v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.
70
-
-
... More
Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall /floor complete and connecting to water supply pipe line including concealed in wall all as specified and directed.
412.9
-
-
... More
Refixing only 15mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.
15
-
-
... More
Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified and directed.
40
-
-
... More
Refixing only 20mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.
5
-
-
... More
Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete
25
-
-
... More
S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
26
-
-
... More
S & F in repair 15 mm bore CP fancy type bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
20
-
-
... More
S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
382
-
-
... More
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
390
-
-
... More
S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed.
4
-
-
... More
S&F in repair bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.
3.6
-
-
... More
S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
26
-
-
... More
S&F as in repairs.Vitreous China wash down water down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
4
-
-
... More
S & F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring complete all as specified and as directed.
4
-
-
... More
S & F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed.
8
-
-
... More
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating,and Union for discharge pipe. with grating and union for discharge pipe all as specified and as directed.
4
-
-
... More
S&F chromium plasted urinal spreader with all complete necessary fitting all as specified and as directed.
4
-
-
... More
S & F in repairs to 600mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed.
10
-
-
... More
S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
12
-
-
... More
S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.
50
-
-
... More
S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.
35
-
-
... More
S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.
8
-
-
... More
S&F in repairs PVC (SWR) bend with access door of 110mm bore complete all as specified.
16
-
-
... More
S&F in repairs PVC (SWR) bend with access door of 75mm bore complete all as specified.
10
-
-
... More
S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.
6
-
-
... More
S&F in repair PVC (SWR) 75mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.
8
-
-
... More
S & F in repair 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
16
-
-
... More
S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
4
-
-
... More
S & F 1000 litres capacity double layer, rotational molded, polythene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling complete all as specified and as directed.
6
-
-
... More
S&F in repair for 20mm dia Ball cock valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed.
6
-
-
... More
M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 complete all as specified and as directed.
Note:- Reinforcement steel will be measured & paid sepratly.
0.4
-
-
... More
M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
80
-
-
... More
Demolition cement Concrete (RCC chimney/cover slabs) of any description and in any position not otherwise specifically provided for complete all as specified.
1.2
-
-
... More
S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified and as directed.
20
-
-
... More
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.
225
-
-
... More
M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm th in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed on External surface. Note:- WPC will be measured & Paid separately
110
-
-
... More
M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.
90
-
-
... More
M & L for rendering 05 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed .
45
-
-
... More
Supply only for water proofing compound.
14.89
-
-
... More
M & L for preparation of new plastered/concrete surfaces of walls and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint and after application of min. 1.50mm thick putty to obtain smooth surface complete all as specified.
70
-
-
... More
M & L for preparation of new plastered/concrete surfaces of ceiling, applying three coat of white wash complete all as specified and directed.
45
-
-
... More
Material & Labour for preparation of new surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.,complete all as specified and directed.
110
-
-
... More
Complete removal existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint after application of min. 1.50mm thick putty to obtain smooth surface complete all as specified and as directed.
676
-
-
... More
M & L for preparation of old decorated surfaces (plastered or unplastered) and applying two coat of white wash on the surfaces of ceiling complete all as specified and directed.
388
-
-
... More
Material & Labour for preparation of old surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.,complete all as specified and directed.
605.75
-
-
... More
M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) including demolition of Precast cement concrete block walling in any position and Including removal of debries out side MoD land complete all as specified and directed.
1.35
-
-
... More
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection/path incl finishing even & smooth with using extra cement in, complete all as specified and directed.
96
-
-
... More
M&L for 1:5:10 PCC (using 40mm graded agg) as in sunken floor incl finishing even & smooth with using extra cement in, complete all as specified and directed.
0.79
-
-
... More
M&L for PCC 1:3:6 type C2 (using 20mm graded aggregate) as in surface channels and drain or foundation mass concrete or path complete all as specified and as directed.
2
-
-
... More
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
65
-
-
... More
S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union CP over head shower of size 125mm with CP shower arm for wall mounted showers flange complete all as specified and as directed.
4
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
810.5
-
-
... More
M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.
90
-
-
... More
M&L Glazed ceramic colour tiles of size 350 x 250 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.
182
-
-
... More
M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick screed bed in CM 1:3 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
410
-
-
... More
M& L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10 mm thick baking course in CM 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
45
-
-
... More
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in eat cement slurry in floors with grey pigments cement and pigments and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.
123.8
-
-
... More
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.
311.86
-
-
... More
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.
49.56
-
-
... More
S&F PVC gutter , Half Round, 180mm size complete all as specified and directed.
50
-
-
... More
S&F in repairs Joint Bracket (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.
8
-
-
... More
S&F in repairs Support Bracket, 180mm for PVC pipes (half round) complete all as specified and directed.
30
-
-
... More
S&F in repairs Running Outlet (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.
8
-
-
... More
S&F in repairs Stop End Outlet (with 1 clamp), 180mm for PVC pipes (half round) complete all as specified and directed.
8
-
-
... More
S&F in repairs PVC Reducer, 180mmx110mm complete all as specified and directed.
8
-
-
... More
Dismantiling of boarding description fixed any position with frame work if fixed with screws complete all as specified and as directed.
70
-
-
... More
ML for anodised aluminium snap frame work for false ceiling complrising GI perimeter channel 0.55mm thick with main T-flange of 20mm and web of 30mm fixed to surrounding wall flange using nylon sleeves and ss screws and web 20mm each , crossed T with flange 20 mm and web 20 mm fixed to main T. main T is suspended from soffit at approx 1200 mm center to centre with GI wire of 6mm dia , cleat and steel expansion fasteners, GI frame shall be 600mmX600mm and laid/inserted 4mm thick nonasbestos fibre cement building board to aluminuim frame as in ceiling complete all as specified and directed.
70
-
-
... More
M&L for preparation of new wooden surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
20.1
-
-
... More
S&F in repair stainless steel decorative pattern holder/end brackets suitable for drapery rod of 25 mm dia complete.
28
-
-
... More
S&F in repair stainless steel decorative pattern end support suitable for drapery rod of 25 mm dia complete.
28
-
-
... More
S&F in repair 25 mm dia stainless steel drapery rod not less than 1mm thick cut to required length and fixed in position, including Standard screw complete all as directed.
45
-
-
... More
S&F 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame/MS frame complete all as specified and as directed.
15
-
-
... More
S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed.
29
-
-
... More
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
82.56
-
-
... More
M & L for PCC 1:3:6 , Type C2 (20mm gradd stone aggregate) as in fixing of RCC/PCC/steel post or similar type of works etc complete all as specified and directed.
8.36
-
-
... More
S & F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, square/rectangular/circular channel or flat sections) including distance pieces, vertical post/column, cleats etc of Fe 410-W (GdeE- 250) quality A complete all as specified and as directed.
2198.46
-
-
... More
S & F for Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases,splices, angle brackets, cleats and other connections complete all as specified and as directed.
3
-
-
... More
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil all as specified and directed.
8.8
-
-
... More
M&L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete
14.76
-
-
... More
M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
7.38
-
-
... More
M&L for cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregate, as in Sub base for floor complete all as specified and as directed .
7.38
-
-
... More
M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed.
5.1
-
-
... More
M&L for rendering 15 mm thick on concrete surface in cement mortar (1:6) using finishing the surface even and smooth without using extra cement, complete all as specified and as directed
38.28
-
-
... More
M & L for preparation of new surfaces and applying two coat of white wash on the surfaces of walls complete all as specified and directed.
38.28
-
-
... More
E/M Portion:-
Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
565
-
-
... More
Taking down copper/aluminium submain wiring (any size) complete, includingcasing caping /concealed conduit removing materials to store for keeping in safe custody or for taking credit
356
-
-
... More
Taking down MCB DB TPN/SPN 8/4 way including depositing the same to MES Store
34
-
-
... More
Taking down MCB (SP/SPN of any capacity) including depositing the same to MES Store
195
-
-
... More
Taking down old service connection wire from pole to DB including removing GI bracket and depositing same to MES Store
585
-
-
... More
Demolition of GI wire earthing including removing GI wire from each pit to DB
16
-
-
... More
Dismantling of old energy meter and depositing to MES store
1
-
-
... More
Material and labour concealed point wiring for one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
20
-
-
... More
All as per item No.140 above but One 3 pin 5 Amps socket out let points on independent board
24
-
-
... More
All as per item No.140 above but 5 Amp socket on same board with other switches.
6
-
-
... More
Material and labour concealed point wiring for power point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVCconduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 4 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
10
-
-
... More
Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
26
-
-
... More
Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
24
-
-
... More
Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only)
6
-
-
... More
Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
10
-
-
... More
Supply & fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
24
-
-
... More
Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.
4
-
-
... More
Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
16
-
-
... More
Taking down servieable LED fitting and keeping it in safe costedy and refixing with all necessary fixtures complete all as specified.
30
-
-
... More
Taking down servieable Geyser and keeping it in safe costedy and refixing with all necessary fixtures complete all as specified.
4
-
-
... More
Supply and fix Vertical distribution board double door MCB TPN 4 way with IP 43 multiphase outgoing suitable for mounting MCB as incomer with Bus bars, Neutral links complete with all accessories including taking down old unserviceable one complete all as directed.
1
-
-
... More
Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable one complete all as directed.
4
-
-
... More
Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.
42
-
-
... More
Supply and fix MCB SPN 40 - 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
4
-
-
... More
Supply and fix MCB TPN 40 - 100 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
1
-
-
... More
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers
4
-
-
... More
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%