Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Addn/ Altn To Certain Md Accn At Shillong Military Station Under Ge Shillong. in East Khasi Hills, Meghalaya, with an estimated contract value of Rs. 10,67,50,000. The bid opening date for this tender is 09-06-2025 and the last date for bid submission is 07-07-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Building Construction
Eprocure
Opening Date9 Jun 2025
Closing Date7 Jul 2025
Tender Amount₹ 10,67,50,000
Costs
EMD
₹ 8,58,750Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_713334_1Tender No
89840/SHL/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.
143
-
-
... More
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) using concrete cutter complete all as specified and as directed.
127
-
-
... More
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
11
-
-
... More
M & L for hard core with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.
78
-
-
... More
M& L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base in floor complete all as specified and as directed.
1159
-
-
... More
M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.
15
-
-
... More
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
1713
-
-
... More
M & L for PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed.
9.5
-
-
... More
M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
334
-
-
... More
M & L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in coping, cills, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.
2.5
-
-
... More
M & L for 25mm thick PCC 1:2:4 type B1 (Using 20 mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed.
504
-
-
... More
M&L for RCC 1:1.5:3, type A-1 (using 20mm graded crushed stone aggregate) as in foundations, footings, foundation beams, plinth beams, bases for columns, etc. complete all as specified and as directed.
3
-
-
... More
M & L for RCC 1:1.5:3, type A-1 (using 20 mm graded crushed stone aggregate) as in columns, pillar, piers, posts and struts etc. complete all as specified and as directed.
3
-
-
... More
Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and as directed.
10
-
-
... More
Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed.
60
-
-
... More
M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.
1500
-
-
... More
M&L for mild steel TMT bars 8 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.
350
-
-
... More
Demolition of brick or stone masonry work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
51
-
-
... More
M & L for Precast PCC 1:3:6, type C1 (Using 20 mm graded crushed stone aggregate) as in soild bolck masonry exc. 10 cm in width and setting in Cement mortar (1:6), complete all as specified and as directed.
35
-
-
... More
M & L for Precast PCC 1:3:6, type C1 (Using 20 mm graded crushed stone aggregate) as in soild bolck masonry n exc. 10 cm in width and setting in Cement mortar (1:4), complete all as specified and as directed.
277
-
-
... More
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
2733
-
-
... More
Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.
907
-
-
... More
M & L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound @ 3% or as per manufacture's instructions, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Note : Water proofing compound shall be measured and paid separately as "Supply only".
1904
-
-
... More
Supply only Integral water proofing compound ISI marked complete all as specified and as directed.
335
-
-
... More
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed.
1252
-
-
... More
M & L for rendering 10mm thick in cement mortar (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished the surface even and smooth without using extra cement complete all as specified and as directed.
531
-
-
... More
M & L for rendering 15 mm thick in cement mortar (1:4) on the ‘other’ side of
lathing mixed with water proofing compound @ 3% or as per manufacture's instructions, finished the surface even and smooth without using extra cement complete all as specified and as directed.
531
-
-
... More
M & L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. finished the surface even and smooth without using extra cement complete all as specified and as directed.
531
-
-
... More
M & L for preparation of newly plastered surface of wall and applying a coat of 1.00 mm thick(average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper etc complete all as specified and as directed.
2672
-
-
... More
M & L for complete removal of old treated surfaces on walls and applying a coat of 1.00 mm thick(average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper etc complete all as specified and as directed.
10114
-
-
... More
M & L for complete removal of old ceiling surfaces and applying two coats of white washing over a coat of chalk whiting complete all as specified and as directed.
4112
-
-
... More
Complete removal of existing treatment on old ceiling surfaces and applying a coat of 1.00 mm thick(average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper etc complete all as specified and as directed.
700
-
-
... More
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and as directed.
8300
-
-
... More
M & L for waterproof cement based exterior wall putty @ 1 Kg(undiluted) per sqm of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-
Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.
Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.
Note : (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scaffolding upto 10m height of building is included in this item.
(c.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (d) Masking of window/doors during spray painting using polyethene film will be included. (e) Cleaning and clearing site of paint, mats etc. included. (f) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.
9800
-
-
... More
M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scaffolding upto 10m height of building is included in this item.
(d.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (e) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.
9800
-
-
... More
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
2323
-
-
... More
S & F 20 mm thick 2nd class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc. complete as specified and as directed.
730
-
-
... More
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and as directed.
6840
-
-
... More
S & F Pre- painted galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
5980
-
-
... More
S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved by GE having tensile strength of 550 Mpa as in ridges,valley complete all as specified and as directed.
860
-
-
... More
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.
4000
-
-
... More
M & L for 4mm thick non asbestos fibre cement building boards 600mm x 600mm fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete all as specified and as directed.
4000
-
-
... More
S & F 12mm thick PVC boards fixed with screws to timber frame complete all as specified and as directed.
150
-
-
... More
S & F 0.90mm thick PVC decorative laminates type 1 of surface finish colour and pattern as approved taxed with approved adhesive as per manufactures instructions complete all as specified and as directed.
60
-
-
... More
S & F anodised aluminium snap grid frame work for false ceiling with aluminium main T-flange of 25 mm and web 30 mm fixed to surrounding wall angle with flange and web 25 mm, cross T- flange and web 25 mm , Main T suspended from soffit @1200 mm C/C using 4mm dia GI wire aluminium frame will be 600x600 to receive ceiling board complete all as specified and as directed.
4000
-
-
... More
Dismantling timber scantling 40Sqcm and over in section unframed work in any position complete all as specified and as directed.
10
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
933
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.
529
-
-
... More
Taking down shutters of any description n exc 1.0 Sqm refixing in same opening complete all as specified and as directed.
20
-
-
... More
Taking down shutters of any description exc 1.0 Sqm and n exc 2 sqm refixing in same opening complete all as specified and as directed.
20
-
-
... More
Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.
67
-
-
... More
Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.
67
-
-
... More
S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
882
-
-
... More
S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and as directed.
268
-
-
... More
M & L for 2nd class hard wood, in scantlings, clean sawn timber as in un framed work complete all as specified and as directed.
10
-
-
... More
M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
6.000000000000001
-
-
... More
M & L for preparation of surfaces of wood and wood based surfaces new or old of any description and girth not otherwise described and treating with one coats of creosote oil complete all as specified and as directed.
798
-
-
... More
M & L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
1500
-
-
... More
M & L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
600
-
-
... More
S & F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
900
-
-
... More
S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.
550
-
-
... More
M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.
1206
-
-
... More
M & L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
27
-
-
... More
S & F 18/19 mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.
2000
-
-
... More
S & F 12 mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.
448
-
-
... More
S & F 0.90 mm thick decorative laminates type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
1650
-
-
... More
S & F 100 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.
652
-
-
... More
S & F 125 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.
2035
-
-
... More
S & F 100 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
520
-
-
... More
S & F 200 mm long stainless steel barrel tower bolts with bright bolts and fixed complete all as specified and as directed.
1876
-
-
... More
S & F 100 mm long extruded brass handles, fabricated type polished complete all as specified and as directed.
520
-
-
... More
S & F 150 mm long stainless steel handles fabricated type bright finish complete all as specified and as directed.
1876
-
-
... More
S & F 300 mm long Strainless steel sliding door bolt with bright bolt, not less than 12 mm dia with and including a minimum of 06 bolts and nuts (04 Nos. on bolt plate and 02 Nos. on staple plate) complete all as specified and as directed.
678
-
-
... More
S&F steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate welded to steel /Fixed to wooden door frame complete all as specified and as directed.
142
-
-
... More
S & F floor door stopper of brass body and tongue with hard drawn steep spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
664
-
-
... More
S & F Magnet catches for cupboard shutter, brass body and striking plate including letting complete all as specified and as directed.
789
-
-
... More
S & F Wooden brackets with wooden finished for 20 mm dia double rod , rollers etc wooden finished complete all as specified and as directed.
96
-
-
... More
S & F Wooden brackets with wooden finished for 20 mm dia single rod , rollers etc wooden finished complete all as specified and as directed.
1050
-
-
... More
S & F decorative wooden finials with wooden finished complete all as specified and as directed.
1105
-
-
... More
S & F in repairs, 20 mm dia harrison rails, chromiun plated fancy type withstops , rollers etc complete all as specified and as directed.
1636
-
-
... More
S & F in repairs, peg set of six, chromium plated, back plate including chromium plated fixing screw complete all as specified and directed.
376
-
-
... More
S & F powder coated (min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
7000
-
-
... More
S & F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc. complete all as specified and as directed
65
-
-
... More
S & F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,including locking fittings complete all as specified and as directed.
1900
-
-
... More
S & F aluminium guide rail three track having two PVC wheel 50 mm dia for smooth functioning of cupboard/door shutter complete all as specified and as directed.
40
-
-
... More
S & F 6mm thick Aluminium composite panel board, interior grade, both side with decorative choice lamination, fixed with screws to aluminum frame work complete all as specified and as directed.
28
-
-
... More
S & F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
230
-
-
... More
S & F 150 mm long compacted recessed handle suitable for sliding door complete all as specified and as directed.
42
-
-
... More
S & F stainless steel drawer box 500mm of any colour with provision for double rail rolling system complete all as specified and as directed.
10
-
-
... More
S & F plain stainless steel basket of size 420mm x 485mm x 200mm complete all as specified and as directed.
10
-
-
... More
S & F plain stainless steel cup & saucer basket of size 520mm x 585mm x 100mm complete all as specified and as directed.
10
-
-
... More
S & F plain stainless steel perforated cutlery basket of size 470mm x 485 x 100mm complete all as specified and as directed.
10
-
-
... More
S & F plain stainless steel grain trolley of size 525mm x 485mm x 350mm complete all as specified and as directed.
10
-
-
... More
S & F plain stainless steel thali basket of size 470mm x 485mm x 200mm complete all as specified and as directed.
10
-
-
... More
S & F ball bearing drawer channel (soft close) of size 600 mm long complete all as specified and as directed.
738
-
-
... More
S & F clip on cabinet hinge(auto close) complete all as specified and as directed.
800
-
-
... More
M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
150
-
-
... More
M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS.1161 - 2014 grade Fe-290 (Gde E-165) complete all as specified and as directed.
5000
-
-
... More
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces,hold fast etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe 290-W(Gde-E- 165)quality-A complete all as specified and as directed.
400
-
-
... More
S & F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed.
23600
-
-
... More
S&F in repairs, 1mm thick Mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
40
-
-
... More
M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed.
268
-
-
... More
S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
771
-
-
... More
S & F GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joist, etc. in wall ceiling stanchions, beam etc incl all laps cutting and waste complete all as specified and as directed.
568
-
-
... More
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
15
-
-
... More
S & F 4.80 mm thick sheet glass ordinary quality and glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and as directed.
824
-
-
... More
S & F 4.80 mm thick frosted sheet glass ordinary quality and glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and as directed.
131
-
-
... More
S & F 6.30 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm each pane complete all as specified and as directed.
8
-
-
... More
S & F 8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm each pane complete all as specified and as directed.
7
-
-
... More
M & L for 12 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete with all fittings as washers/handles and bolts complete all as specified and as directed.
25
-
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.
11659
-
-
... More
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
51
-
-
... More
M & L for vitrified ceramic tiles, light shade, 9mm/10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
600
-
-
... More
M & L for vitrified ceramic tiles, light shade, 9mm/10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
60
-
-
... More
M & L for coloured Non skid ceramic tiles (Joint free) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
5790
-
-
... More
M & L for non skid ceramic coloured tiles (Joint free) 7 to 8mm thick (square / rectangular) area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
530
-
-
... More
M & L for glazed light coloured/printed ceramic tiles 300x600x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
4460
-
-
... More
M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and treating the surface with beeswax polish complete all as specified and directed.
292
-
-
... More
M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
25
-
-
... More
S & F 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
212
-
-
... More
Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.
408
-
-
... More
M & L for outdoor 10mm thick vitrified paving tiles (square /rectangular) polished area of each tiles exc 0.06 sqm but not exc 0.11 laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
223
-
-
... More
M & L for outdoor 10mm thick vitrified paving tiles (square /rectangular) polished area of each tile exc 0.06 sqm but not exc 0.11 in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
15
-
-
... More
M&L pre polished cement concrete chequrred tiles of size 300mm x 300mm x 25mm thick machine pressed , set and jointed and pointed in neat cement slurry with grey cement and pigments including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
659
-
-
... More
S & F 500 litres capacity rotational moulded HDPE water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia PTMT ball valves, high pressure with epoxy coated aluminium rod & high-density plastic ball complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed.
101
-
-
... More
S & F 1000 litres capacity rotational moulded HDPE water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia PTMT ball valves, high pressure with epoxy coated aluminium rod & high-density plastic ball complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed.
27
-
-
... More
Taking up or down 15 mm bore GI water tubing and connections including removal to store, complete all all as specified and as directed.
1305
-
-
... More
Taking up or down GI tubing 20mm dia and connection including removal to store, complete all all as specified and as directed.
1010
-
-
... More
Taking up or down GI tubing 25mm dia and connection including removal to store, complete all all as specified and as directed.
1349
-
-
... More
M & L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc., in stone/brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar (1:3), complete all as specified and as directed.
739
-
-
... More
Supply and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
1305
-
-
... More
Supply and laying 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
1010
-
-
... More
Supply and laying 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
1349
-
-
... More
S&F stop valves 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
155
-
-
... More
S&F stop valves 20mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
154
-
-
... More
S&F stop valves 25mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
155
-
-
... More
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe.
708
-
-
... More
S & F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
238
-
-
... More
S & F in repairs, 2 way bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
20
-
-
... More
S & F in repairs, 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
4
-
-
... More
S & F in repairs, Brass chromium plated single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) complete all as specified and as directed.
12
-
-
... More
S & F in repairs, Brass chromium plated wall mixer with provision for overhaed shower complete with 115 mm long bend pipe on upper side connecting legs & wall flange complete all as specified and as directed.
114
-
-
... More
S & F in repairs, cast copper alloy chromium plated single lever tall body centre hole wash basin mixer for mixing hot & cold water including 600 mm long steel braided PVC connection pipe complete all as specified and as directed.
12
-
-
... More
S & F in repairs, central hole wash basin mixer for mixing hot & cold water with fitttings, brass chromium plated for 15 mm bore pipe complete all as specified and as directed.
114
-
-
... More
S & F in repairs, Brass chromium plated single lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges complete all as specified and as directed.
6
-
-
... More
S & F in repairs, 15 mm bore chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe line complete all as specified and as directed.
110
-
-
... More
S & F in repairs, 125 mm Brass chromium plated shower rose complete all as specified and as directed.
109
-
-
... More
S & F in repairs chromium plated over head shower square shape single flow with rubit cleaning system of size 200x200mm (SS Body & face plate with cromium finish) with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange complete all as specified and as directed.
12
-
-
... More
S & F in repairs, soap dish Brass chromium plated of size 120mm x 55mm x 120mm fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed
20
-
-
... More
S & F in repairs, chromium plated soap dish, fixed to walls with brass screws complete all as specified and as directed.
110
-
-
... More
S & F in repair, tubular towel Rail of 20mm dia and 60cm in length, D shaped, with aluminium anodised brackets complete all as specified and as directed.
110
-
-
... More
S & Fin repairs, Towel ring sqare shape stainless steel complete all as specified and as directed.
20
-
-
... More
S & F in repairs, stainless steel Towel rack 600mm long with lower hangers complete all as specified and as directed.
20
-
-
... More
S & F chromium plated Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated), Rubit cleaning system including flexible tube in chrome finish 1.5 m long with nuts complete all as specified and as directed.
12
-
-
... More
S & F in repairs, Brass chromium plated health faucet with 15 mm bore 1metre long tube acrylic type complete all as specified and as directed.
20
-
-
... More
S & F health faucet (ABS Body) mils steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
106
-
-
... More
S & F in repairs, Toilet roll holder with stainless steel flap complete all as specified and as directed.
20
-
-
... More
S & Fin repairs, corner glass shelf with bracket complete all as specified and as directed.
20
-
-
... More
S & F in repairs, Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed complete all as specified and as directe.
12
-
-
... More
S & F glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed
4
-
-
... More
S & F in repairs, Cabinet mirror of size 622 x 422 mm rectangular shape, PTMT frame with openable door shutter with acrylic frame outside mirror as framed complete all as specified and as directed.
114
-
-
... More
S & F in repairs, bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed.
5
-
-
... More
S & F in repairs 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed.
109
-
-
... More
S&F in repairs, Stainless Steel Sink with drainage board made out of 1.00mm thick sheet with plug washers( including waste coupling brass chromium plated suitable for Sink, with long screwed shanks and fly nuts of size 40 mm, PVC waste pipe) MS angles cantilever brackets of suitable size and connecting union to pipe of over all size 915x460mm and bowl size 410x330x160mm complete all as specified and directed.
110
-
-
... More
S&F in repairs, Stainless Steel Sink made out of 1.00mm thick sheet with plug washers (including waste coupling brass chromium plated suitable for Sink, with long screwed shanks and fly nuts of size 40 mm, PVC waste pipe) MS angles cantilever brackets of suitable size and connecting union to pipe of overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.
10
-
-
... More
S & F in repairs, stainless steel kitchen plate rack of size 31" x 30" x 10" made out of stainless steel sheet of 1.00 mm thick with all accessories complete all as specified and as directed.
116
-
-
... More
S & F in repairs, stainless steel kitchen plate rack of size 24" x 24" x10"made out of stainless steel sheet of 1.00 mm thick with all accessories complete all as specified and as directed.
4
-
-
... More
S & F in repairs, vitreous china, wash hand basin, white, flat back size 550 mm x 400 mm with brackets, 32 mm waste coupling brass chromium plated suitable for wash hand basins with long screwed shanks and fly nuts and PVC waste pipe including pedestal complete all as specified and as directed.
118
-
-
... More
S & F in repairs, vitreous China clay table top round shape wash hand basin of size 408x480x135 mm including 32 mm waste coupling brass chromium plated, suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe complete all as specified and as directed
12
-
-
... More
S & F in repairs, Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and as directed.
6
-
-
... More
S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
114
-
-
... More
S & F in repairs, Vitreous China EWC including seat cover closed pattern single piece of size 755x365x655 complete all as specified and as directed.
12
-
-
... More
S & F in repairs, PVC (Plastic Polymer Cistern) valveless, syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32 mm PVC flush pipe of required length and making connections, complete all as specified and as directed.
118
-
-
... More
S & F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
601
-
-
... More
S & F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor including dismantling of old pipe of any description complete all as specified and as directed.
Note : Earth work shall be measured and paid separately under respective item.
853
-
-
... More
S & F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor including dismantling of old pipe of any description complete all as specified and as directed.
Note : Earth work shall be measured and paid separately under respective item.
2090
-
-
... More
S & F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
476
-
-
... More
S & F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
710
-
-
... More
S & F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.
105
-
-
... More
S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
470
-
-
... More
S & F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
439
-
-
... More
Dismantling posts or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion Concrete, brick work masonry, etc.and making good disturbed ground complete all as specified and as directed.
150
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
3
-
-
... More
Dismantling fencing wire mesh of any type complete all as specified and as directed.
300
-
-
... More
Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.
75
-
-
... More
S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
1750
-
-
... More
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc. 10 cm long and diameter of shank 11 to 15mm completed all as specified and as directed.
50
-
-
... More
Supply only mild steel galvanised chain link fencing wire mesh of any size or type complete all as specified and as directed.
1200
-
-
... More
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed
300
-
-
... More
S&F mild steel round/square plain bars 10mm dia and over, cut to length bend to shape as required for fixing of chain link fencing complete all as specified and as directed.
360
-
-
... More
M&L for Repair to damaged roof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated:-
(i) Rendering 15mm thick in Cm (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm.
(ii) Applying one coat of bituminous primer . (Note :- Bituminous primer shall be 'TANK MASTIC' manufactured by M/s STP Ltd or "EMUFALTE" manufactured by M/s Texsa India Ltd)
(iii) supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester fabric weight not less than 150gms per Sqm. Polymeric membrane shall be taken to a height of 3cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.
Note :- (i) Laying APP based polymeric membrane shall be done torch on method as per manufacturers instructions.
(ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions.
(iii) APP based polymeric membrane shall be "SUPER THERMOLAY" manufactured by M/s STP Ltd of "MOPLY FP 3mm" manufactured by M/s Texas India Ltd & equivalent of Shivam Tar product.
850
-
-
... More
Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.
2901
-
-
... More
M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including 20 mm PVC rigid conduit on walls/ceiling for one light/fan/exhaust fan/bell point controlled by one number one way 5 Amp/10Amp switch complete all as specified and as directed.
Note: Modular boxes with cover plate measured and paint for separately under respective item of this schedule.
2210
-
-
... More
All as per item serial No 196 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches.
378
-
-
... More
All as per item serial No 196 here-in-before but for One light point controlled by 2- two way 5 Amps/10Amps switch .
47
-
-
... More
All as per item serial No 196 here-in-before but for One 3 pin 5 Amp/10Amp switch socket outlet on independent board.
611
-
-
... More
All as per item serial No 196 here-in-before but with 4 Sqmm single core multistranded copper conductor cable and earth continuity wire with 4 Sqmm cable for 6 pin 15 Amp/20Amp socket outlet on independent board.
558
-
-
... More
S&F Modular switch , flush type single pole one way 6 Amp/10Amp 240 volt complete all as specified and as directed.
3199
-
-
... More
S & F Modular Bell push 6 Amp/10Amp 240 volts, flush type complete all as specified and as directed.
121
-
-
... More
S & F Modular switch , flush type single pole two way 6 Amps/10Amp 240 volt complete all as specified and as directed.
94
-
-
... More
S & F Modular Socket outlet 2 in 1, 3 Pin 6 Amp/10Amp flush type 240 volts complete all as specified and as directed.
989
-
-
... More
S & F Modular Socket outlet 2 in 1, 3 Pin 6 Amp/16Amp or 10 Amp/20Amp flush type 240 volts complete all as specified and as directed.
558
-
-
... More
S&F Modular switch , flush type single pole one way 16 Amp/20Amp 240 volt complete all as specified and as directed.
558
-
-
... More
S & F Modular cover plate with frame and flush box of 8 modules complete all as specified and as directed.
90
-
-
... More
S & F Modular cover plate with frame and flush box of 6 modules complete all as specified and as directed.
220
-
-
... More
S & F Modular cover plate with frame and flush box of 4 modules complete all as specified and as directed.
270
-
-
... More
S & F Modular cover plate with frame and flush box of 3 modules complete all as specified and as directed.
1169
-
-
... More
S & F Modular cover plate with frame and flush box of 2 modules complete all as specified and as directed.
200
-
-
... More
S & F Modular cover plate with frame and flush box of 1 modules complete all as specified and as directed.
186
-
-
... More
S&F ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed.
1458
-
-
... More
S & F electric bell, Ding-Dong AC, 230V, single pole with brass screws and cup washers complete all as specified and as directed.
121
-
-
... More
Supply Installation, testing & comissioning intregral LED 4ft luminaire of CRCA / extruded aluminium housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a 18 Watt LED with colour consistency SDCM< 5,CRI> 80 and colour temperature - 4000 to 6500K, Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at-least 120 lumen/watt, power consumption should not be more than 18W (+5%). the life of fixture (including Driver): 50000 burning Hrs.@ L70B50 Lumen maintenance @ design ambient temp 50 deg C. The electronic driver used shall have a power factor >0.95 and THD < 10% suitable for an operating voltage range of 150-270V AC current Ripple<5% internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I &driver should be of class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have in house NABL accredited lab conduct LM79, type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for luminaire manufacturer along along with sample approval. The LED Luminaire & It's driver both should be BIS registered contractor shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer type test certificate for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver including dismantling of old tube light fitting of any description complete all as specified and as directed.
895
-
-
... More
Supply Installation, testing & commissioning of Integral / batten LED 2ft, 10watt 220 V, luminaire made of CRCA housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a LEDs with colour consistency SDCM ≤ 5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed to emit at least minimum 2000 system lumens at a system efficacy of at-least 120 lumen/watt. Power consumption should not be more than 10W (± 5%). The Life of fixture (Including Driver):50000 burning Hrs. @ L70B50 Lumen maintenance @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 and THD ≤10%, suitable for an operating voltage range of 140-270V AC, Current Ripple ≤ 5%, Internal surge protection should be minimum 4KV, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire shall be IP20 & IK02 compliant. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with Sample Approval. The LED Luminaire & it's driver both should be BIS registered. The contractor shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredit lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver including dismantling of old tube light fitting of any description complete all as specified and as directed.
560
-
-
... More
S & F in repairs, wall bracket decorative LED light fitting with lamp 10 Watt metallic housing complete with necessary connection including complete all as specified and as directed.
252
-
-
... More
S&F electric water heater (Geyser) 25 Litres capacity, BEE 5 star rated, vertical type, digital temperature display with suitable size of fastner and including provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass line coating / porcelain Enamel Coating / Titanium Enamel Coating / Nano Blue Diamond Glass Coating / Coating with Single Weld line tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure, multiple safety systems for protection against dry heating, overheating and over pressure,IPX4 waterproof technology for longer product life having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element 5 years on tank complete all as specified and as directed.
126
-
-
... More
S & F modular switch 15/16 A, 1 module and modular socket 15/16A, 2 module, 3 pin, complete all as specified and as directed. Note: Mounting of socket shall be done at height of geyser and mounting of switch shall be done near to door at height not more than 2.0 meter from floor level.
126
-
-
... More
S & F Exhaust fan 300 mm sweep, copper winding, metal body, four metal blades BEE approved/ISI marked, air delivery shall not less than 1600 CMH at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer, complete all as specified and as directed.
116
-
-
... More
S & F Exhaust fan 250 mm sweep, copper winding, plastic body, four blades BEE approved/ISI marked, 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer, complete all as specified and as directed.
258
-
-
... More
Supply Installation, testing & commissioning of Kitchen Exhaust System, Filter Less and Dry Heat clean technology Matt Black Finish, Hassle free Filter Less and Dry Heat Auto Clean technology, Thermostatic Touch Control Panel with 3 Speed Gesture Motion, including, Matt Black Finish, Black Metal Oil collector, Motor with Copper Winding, Black Glass Clad Hood with LED Insignia, Front Panel with Black Glass, Energy Saving LED Light Metal Blower + Metal Housing, Designed Air Flow (max); 1250 Nm3/h, Noise Level: 58dBA (max), Lifetime Warranty, Size; 90 cm complete including flexible Aluminium/MS duct from exhaust to outside of wall, all Civil work for fixing system, make hole and replastering existing wall with wall colour coding and complete Electrical wiring as required for system running, complete all as specified and as directed.
10
-
-
... More
S & F in repairs, Building Security light fittings high quality group control enabled integrated LED Building security light with a minimum system lumen of 3000 lm and system wattage not exceeding 25W with a nominal system efficacy of 120 lumen/Watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI ≥ 70. The housing should be made of LM6/ADC 12 Alloy, non-corrosive Single piece pressure die-cast aluminium, to withstand extreme environments. The spigot shall be part of "Single Piece Pressure Die-Cast housing" and shall not be bolted to the luminaire housing to ensure robust design. The name of the brand, should be embossed/engraved and should not be mentioned using sticker/screen printing. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. The luminaire LED shall have declared Lifetime of 75K hours @L70. The product should be designed for continuous operation (10-12 Hrs per day). The Ingress protection should be minimum IP66 and impact resistance shall be IK10. Control gear compartments shall be Top maintain manufacturer as that of LED luminaires. Luminaires manufacturer must have in house NABL accredited lab conduct LM79, type test as per IS10322 & "FAT" before dispatch as per IS 10322. The successful bidder must submit the NABL accreditation certificate to luminaire manufacturer along with technical bid. The LED luminaire and its driver both should be BIS registered, successful bidder shall submit the following report before supply of material for approval LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer type test certificate for luminaire as issued by NABL accredited lab. RoHS compliance issued by LED luminaire manufacturer. BIS certificate for LED Luminaire and Driver. Similar to above specs in signify (Phillips/Wipro/Regent).5V) and have and auto recovery features. The driver shall comply IEC61547 & IEC 61000-3-2. The Luminaire driver & its SPD shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS 10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with sample approval. The LED luminaire and its driver both should be BIS registered. Contractor shall submit the following reports before supply of materials for approvals: LM78 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test report for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire and driver and including 1.2 m long 32 mm dia GI pipe light grade bend to shape and fixed using two Nos clamps fabricated using MS flat iron 40x50 mm including necessary nut bolts and washers and making electrical connection using 1.5 Sqmm, 3 core multi-stranded copper conductor PVC insulated and overall PVC sheathed cable from light fitting, complete all as specified and as directed.
112
-
-
... More
S & F in repairs, MCB DB factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete complete all as specified and as directed.
27
-
-
... More
S & F in repairs, single pole & neutral DBs 12 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.
126
-
-
... More
S & F Surge Protection Device (SPD) Single Phase and neutral, T2 - Limb, Imax 20 KA per pole complete fixed in distribution board and making connections complete all as specified and as directed.
27
-
-
... More
S & F RCBO four pole 100 mA, nominal rating 25 kA, and capacity 63 Amps, for earth leakage, overload and short circuit protection and to be housed in DBS complete including necessary connection complete all as specified and as directed.
Note: In case of tripping of RCBOs contractor shall be responsible for rectifying the wiring defect or replace wiring without any extra cost.
6
-
-
... More
S & F RCBO four pole 30 mA, nominal rating 25 kA, and capacity 40 Amps, for earth leakage, overload and short circuit protection and to be housed in DBS complete including necessary connection complete all as specified and as directed.
Note: In case of tripping of RCBOs contractor shall be responsible for rectifying the wiring defect or replace wiring without any extra cost.
21
-
-
... More
S&F in repairs, MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.
1220
-
-
... More
S&F in repairs, MCBs, SPN 40 to 63 Amps, 10 KA, IS/IEC 60898-1 2002, C series marked fixing in DBs complete all as specified and as directed.
212
-
-
... More
S&F in repairs, MCB TPN 25 to 63 Amps 415 V, 50 Hz,10 kA,C-series complete all as specified and directed.
40
-
-
... More
M&L for Sub main wiring with 2 runs of 1.5 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: (i) 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit.
(ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.
1120
-
-
... More
M&L for Sub main wiring with 2 runs of 4 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: (i) 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.
(ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.
410
-
-
... More
M&L for Sub main wiring with 2 runs of 6 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 25mm dian non metallic PVC concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: (i) 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.
(ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.
2085
-
-
... More
M&L for Sub main wiring with 4 runs of 6 sqmm, single core, FRLSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 25mm dian non metallic PVC concealed conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: (i) 4 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.
(ii) Cutting chases for concealed submain wiring for the above point and making good in cement mortar is deemed included in quoted rate.
110
-
-
... More
Dismantling old electric kWH meters carefully by disconnecting all electric connection and re-fixing the same after completion on the original location of all works including making connection of incoming and outgoing wiring circuits and submission of KWH reading details of old unserviceable taken down meter complete all as specified and as directed.
116
-
-
... More
Taking down existing water heater of any capacity and deposit the same to MES store complete all as specified and as directed.
110
-
-
... More
Taking down old existing exhaust fan of any size and depositing same to MES storeyard complete all as specified and as directed.
91
-
-
... More
M & L for earthing in replacement complete with galvanised steel earth plate electrode 60cm x 60 cm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter depth below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC(1:2:4) type B1 cover slab 30cm x 30 cm x 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8mm dia TMT bar funnel, wire mesh, 20 mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers, necessary excavation and earthwork in any type of soil and including necessary testing, complete all as shown in Electrical plate No. 3 of SSR- part-I, including taking out of old unserviceable earthing complete all a specified and as directed.
54
-
-
... More
M & L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in pole coping, including necessary formwork (straight or curved) complete all as specified and as directed.
2
-
-
... More
S&F GI tube light grade of size 40 mm bore dia conforming to IS 1239 of 1990 for for protection of LT cable laid in trenches/under road,pavement, hard standing or fixing on wall/pole etc. complete all as specified and as directed
18
-
-
... More
M & L for sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23 cm (15cm under the cable and 8 cm over the cable) and gently punned down to 18cm thickness, complete all as specified and as directed. (Note: Only punned down sand shall be measured)
40
-
-
... More
M & L for old size clay burnt bricks class 'B' type laid dry width wise across the line of cable in trenches for protection of underground cable complete all as specified and as directed.
4.96
-
-
... More
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 25 sqmm, 4 core, 1100 Volts (Earthed) grade, confirming to IS-7098 (Part-II) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs including dismantling of old cable complete all as specified and as directed.
400
-
-
... More
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 35 sqmm, 3.5 core, 1100 Volts (Earthed) grade, confirming to IS-7098 (Part-II) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs including dismantling of old cable complete all as specified and as directed.
300
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%