Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Bldg No P-140 (otm) And Certain Revenue Work In Zone I And Ii At Umroi Mil Stn Under Ge Umroi in Ri Bhoi, Meghalaya, with an estimated contract value of Rs. 38,00,000. The bid opening date for this tender is 05-06-2025 and the last date for bid submission is 26-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 76,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_712801_1Tender No
8924/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 5 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-
(a) Sections for shutter:- (i) 'H' section: 39 x 20 x 1.50 mm thick (ii) 'Interlock' section: 39 x 20 x 1.50 mm thick
(iii) 'Edge & Bottom' section: 41 x 20 x 1.50 mm thick (b) Section for frame:-
(i) Top & Sides: 92 X 29.50X 1.50mm thick (ii) Bottom: 92 X 29.70 X 1.50mm thick
22.75
100
-
... More
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing.
Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
13.32
100
-
... More
S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed.
9.4
100
-
... More
Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and fixing in frame at site as per specification and drawings complete all as specified and directed.
6.5
100
-
... More
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.
3.61
100
-
... More
S&F Pressed steel frames for doors of frame size 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.
Note : Filling of hollow portion of frames with PCC (1:3:6) type C1 shall be measured and paid separately.
25
100
-
... More
Material & labour for PCC type C1 1:3:6 (20 mm graded stone aggregate) for filling of hollow frame complete all as specified and directed.
0.16
100
-
... More
Material & labour for PCC type B0 1:2:4 (12.5mm graded stone aggregate) for fixing hold fasts, angle, etc including necessary form work complete all as specified and directed.
0.07
100
-
... More
S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
23.63
100
-
... More
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
39
100
-
... More
S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
14.85
100
-
... More
S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Note : The rate quoted are deemed to be inclusive of making good to the disturb surfaces to match the existing surfaces.
0.1
100
-
... More
M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
19.689999999999998
100
-
... More
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
24
100
-
... More
M&L for prepration of new or previously untreated steel surfaces & apply two coats of anti corrosive paint over a coat of red oxide primer on steel surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.
104
100
-
... More
S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.
22
100
-
... More
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
22
100
-
... More
S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.
4
100
-
... More
S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
4
100
-
... More
S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.
35
100
-
... More
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy and fixed complete all as specified and directed.
5
100
-
... More
S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.
3
100
-
... More
Dismantling plain or semi corrugated or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
190.8
100
-
... More
S&F pre-painted galvalume aluminum zinc coating PPGL based corrugated/Trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
180
100
-
... More
S&F Pre- painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eave board, fixed with self tapping screws, complete all as specified and directed.
10.8
100
-
... More
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:6 screed bed for laying of floor finishes complete all as specified and directed.
89.14
100
-
... More
M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
30
100
-
... More
M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick backing coat in CM (1:4) complete all as specified and directed.
6
100
-
... More
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:6 screed bed for laying of floor finishes complete all as specified and directed.
11.34
100
-
... More
M&L for vitrified ceramic tiles light shade 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:6 screed bed for laying of floor finishes and dismantling of existing tiles and bedding layer complete all as specified and directed.
90
100
-
... More
Material and labour for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm/600 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4 complete all as specified and directed.
49.14
100
-
... More
Material and labour for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4 including demolition of existing tiles and cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premisses complete all as specified and directed.
33.9
100
-
... More
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.
75
100
-
... More
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
85.14
100
-
... More
M&L for providing and fixing false ceiling of designer tiles ivory painted (High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of size 595 X 595 mm and any of the design (cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get required length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main "T" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main "T", bottom exposed width of 15 mm of all "T" sections of 4 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5 mm width all complete at any heights complete all as specified and directed by the Engr-in-Charge.
105.3
100
-
... More
Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc and applying roof treatment with the following steps and specifications:- a) Applying cement slurry over concrete surfaces @3kg/sqm. b) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement or @ 200ml per 50 Kg of cement or as per manufacturer's instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof (levelling course).
c) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @0.25 litres per sqm conforming to IS : 3384-1986.
d) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20Kg square metre on primed surfaces.
e) A layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.5 kg/m2 reinforced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. f) Applying evenly one coat of aluminium paint @ 0.10litre per square metre over the APP based polymeric membrane.
61.92
100
-
... More
Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
4.02
100
-
... More
M&L for 75 mm thick cement concrete type C1 1:3:6 using 20 mm graded stone aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and directed.
33.6
100
-
... More
M&L for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and as directed.
1.5
100
-
... More
M&L for repair and rendering 10mm thick in CM 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded stone aggregate including necessary scaffolding work for double/single storey bldgs complete all as specified and directed.
10
100
-
... More
Supply, hoisting and fixing in position rotational moulded polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1996) (cylindrical vertical with closed top) including inlet, outlet and wash out holes, all as specified in SSR Part-I, of approved make including dismantling of existing tank and removing from the site complete all as specified and directed.
1
100
-
... More
S & F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including provision of tank adaptor complete all as specified and as directed. (Minimum weight - 210 gms)
1
100
-
... More
Taking up or down steel tubing 15/20mm dia and connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.
80
100
-
... More
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 20 cm girth in brick walls etc complete all as specified and directed.
25
100
-
... More
S&F in repair wash hand basin, white, flat back of size 630 x 450mm excluding pillar taps but including waste coupling, waste pipe and bracket, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
1
100
-
... More
S&F Vitrous china wash down water closet pan EWC, white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.
1
100
-
... More
Supply and fixed vitreous china squatting pan, Orissa pattern of size 580 mm x 440mm white with P or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and directed.
1
100
-
... More
S&F 10 litres Capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.
2
100
-
... More
Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
1
100
-
... More
Supply & fixing in repairs vitreous china urinal half stall type size (465x355x265) white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement; fixing flushing cistern with brackets, grating and union including waste pipe, etc complete all as specified and directed.
3
100
-
... More
S&F in repairs Brass chromium plated shower rose 125mm size, including fixing to steel pipe or union complete all as specified and directed.
1
100
-
... More
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
2
100
-
... More
S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement complete all as specified and directed.
2
100
-
... More
S&F in repairs 15mm dia Bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
2
100
-
... More
S&F in repair 15 mm size stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed.
4
100
-
... More
S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
1
100
-
... More
S&F PVC connection of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed.
3
100
-
... More
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removing debries from site of work complete all as directed by the Engineer-in-Charge.
1.94
100
-
... More
Material and labour for 75 mm thick Plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in flooring, etc. complete all as specified and as directed.
25.92
100
-
... More
Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
10
100
-
... More
M & L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and directed.
10
100
-
... More
S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
3
100
-
... More
S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed
2
100
-
... More
M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or on concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) @ 2% by weight of cement or as per manufacturer's instruction complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid separately
75
100
-
... More
Supply only Liquid water proofing compound complete all as specified and directed.
2.4
100
-
... More
M&L for rendering 10mm thick in cement mortar (1:6) internal surfaces on fair faces of brick work or concrete surfaces, making finished even and smooth without extra cement including taking down of cement plaster complete all as specified and directed.
107
100
-
... More
M&L for preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm) complete all as specified and directed.
75
100
-
... More
M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper of any tint over a coat of alkali resistant primer complete all as specified and directed.
62
100
-
... More
Material and labour for two coats of white wash on newly plastered surfaces of ceiling including preparation of new plastered surafaces complete all as specified and directed.
35
100
-
... More
M&L for preparation of old surfaces of wall and applying a coat of oil bound distemper complete all as specified and directed.
100
100
-
... More
Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over over old surfaces including complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.
50
100
-
... More
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over wall care putty, minimum 1.0 mm thick and a coat of alkali resistant primer complete all as specified and directed.
10
100
-
... More
Washing, rubbing down and stopping of distempered surfaces on any type of wall including preperation of old surfaces and applying two coats of oil bound distemper of any tint with 1mm wall care putty where ever required complete all as specified and directed by Engineer -in-Charge.
Note: Wall care putty shall be measured and paid separately.
200
100
-
... More
M&L for applying 1mm thick wall care putty on internal wall/ceiling complete all as specified and directed.
40
100
-
... More
Preperation of old plastered surfaces of ceiling and making smooth surfaces by applying ready mix putty where ever required and applying a coat of white wash complete all as specified and directed.
Note: Wall care putty shall be measured and paid separately.
100
100
-
... More
Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil and removing surplus soil to a distance not exceeding 50 m and making good surfaces complete all as specified and directed.
124
100
-
... More
M&L for providing cement concrete type B2, 1:2:4 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.
14.04
100
-
... More
M&L for mild steel works for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
2636.9800000000005
100
-
... More
Supply only chain link MS galvanised fencing of any size or type complete all as specified and directed.
Note: Fixing of chain link fencing and line wire will be measured and paid separately.
2505
100
-
... More
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
Note: Supply of Chain link fencing and line wire will be measured and paid separately.
750
100
-
... More
Supply only Mild steel screw bolts 5 to 10mm dia. of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5cm but not exc 10cm long complete all as specified and directed.
59.28
100
-
... More
Supply only 10mm dia TMT bars as in straining rod to secure chain link mesh complete all as specified and directed.
Note: Fixing of chain link fencing and line wire will be measured and paid separately.
641.68
100
-
... More
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
535.8
100
-
... More
Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
80.37
100
-
... More
M&L 100 mm thick cement concrete C-2, 1:3:6 (40mm graded stone aggregate) finished even & smooth with using extra cement as in flooring complete all as specified and directed.
535.8
100
-
... More
M &L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
9.5
100
-
... More
M & L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed.
190
100
-
... More
Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by the Engr-in-Charge.
45
100
-
... More
Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.
2
100
-
... More
Material and labour for point wiring for one light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed.
30
100
-
... More
All as per item No 93 here in before but for one 3 pin 5 Amp socket outlet on independent board.
5
100
-
... More
All as per item No 93 here in before but for one 3 pin 5 Amp socket outlet on same board with other switches.
5
100
-
... More
M&L for point wiring with 2.5 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed.
5
100
-
... More
Material and labour for point wiring for one light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed. Note:- The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring.
50
100
-
... More
All as per item No 97 here in before but for one 3 pin 5 Amp socket outlet on independent board.
10
100
-
... More
All as per item No 97 here in before but for one 3 pin 5 Amp socket outlet on same board with other switches.
8
100
-
... More
All as per item No 97 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified and directed.
15
100
-
... More
Supply and fixing switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed and directed.
93
100
-
... More
Supply and fixing socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) on same board with other switches complete all as specified and directed.
13
100
-
... More
Supply and fixing switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) on independent board complete all as specified/ directed.
15
100
-
... More
Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board complete all as specified/directed.
20
100
-
... More
Supply and fixing ceiling rose surface 3Phase/PVC/Polycarbonate, isolated body complete all as specified and directed.
19
100
-
... More
Supply & fixing ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 V complete all as specified and directed.
4
100
-
... More
Supply & fixing in repair ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 volt, without remote, suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to fan complete all as specified and directed. Make:- Usha Model- ENERGIA 32, Havells Model- EFFICIENCIA NEO or equivalent in Orient/Bajaj. Note:- Old unserviceable ceiling fans shall be deposited to MES store.
4
100
-
... More
Supply and fix MCB SPN DB 8 way double door, IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.
4
100
-
... More
Supply and fix MCB SPN 32 Amps 'B' Series 10 Ka, 240 volts complete all as specified and directed.
4
100
-
... More
Supply and fix MCB SP 6 to 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.
24
100
-
... More
Supply and fix bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified and directed.
5
100
-
... More
Supply and fixing LED Batten fitting 1x18 watts including tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as specified and directed.
13
100
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
24
100
-
... More
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
26
100
-
... More
Taking down aluminium submain wire along with damaged casing caping /PVC conduit pipe from the wall/roof or floor and making good disturbed surface complete all as specified and directed
60
100
-
... More
Material & labour for Sub main wiring with two runs of single core, FRLSH 6 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed single core cable with multi stranded copper conductor of size 6 sqmm as earth wire (green in colour) run through casing capping and connecting to common earth dolly complete all as specified and directed. Note : Two run of 6 Sqmm cable, one run of casing capping and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
60
100
-
... More
Material & labour for Sub main wiring with two runs of single core, FRLSH 6 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through into PVC non metallic rigid conduit including one run of FRLSH PVC insulated and unsheathed single core cable with multi stranded copper conductor of size 6 sqmm as earth wire (green in colour) and connecting to common earth dolly complete all as specified and directed. Note : Two run of 6 Sqmm cable, one run of PVC non metallic rigid conduit and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
55
100
-
... More
S&F Geyser 50 litres capacity 5 Star rated single phase 230 volts 50 Hz, 2 KW including fixing bolts, nut, grouting/plastering arrangement to fix the geyser properly & safely on wall complete of make Havells or its equivalent. Note: The cost of necessary grouting/nuts, bolts, making good to disturbed surfaces, etc. are deemed to be inclusive in the unit quoted rate.
1
100
-
... More
Supply only LED bulb, 7 Watt (Warm white).
5
100
-
... More
Material & Labour for cutting of circular/square hole on any type of wall and suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour complete all as directed by engineer-in-charge.
1
100
-
... More
Supply & fixing Ventilating fans, steel body, AC single phase 230/ 240 V of size 300 mm sweep with louver including fixing arrangement and making good disturbed surface complete all as specified and directed.
1
100
-
... More
Supply and fixing LED light fitting mirror type with high output diffuser 2 ft ,10 watt 220 Volt AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
1
100
-
... More
M & L for 32 mm dia GI tubing light grade bracket over all 1.2 m length with cutting as required and bend to shape with flat iron clamp of size 32 mmx4mm-02 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unserviceable existing one complete all as specified and directed.
3
100
-
... More
Supply and fixing 40 W, LED building security light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5KV including repair/replacement warranty of minimum 2 years complete all as specified and directed.
3
100
-
... More
Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 35 sq mm, 3.5 core complete all as specified and directed.
55
100
-
... More
Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 10 sq mm, 2 core complete all as specified and directed.
150
100
-
... More
Excavation in trenches not exceeding 1.50 m wide and n exc. 1.5 m in depth; for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
40
100
-
... More
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
86.37
100
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
34
100
-
... More
Supply & filling sand for cushioning to the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.
Note : Punned thickness will be measured and paid.
14.43
100
-
... More
M&L for common burnt clay building bricks sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed.
1.88
100
-
... More
M&L for PCC(1:3:6) type C2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.
0.30000000000000004
100
-
... More
Supply and fixing/laying GI tubing light grade of size 40 mm bore with all fittings laid in trenches or fixed to wall for protection of cable complete all as specified and directed.
9
100
-
... More
Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.
1
100
-
... More
M&L Steel Tubular swaged pole complete with cast iron base plate, final taper, bolts, nuts and screws, etc as specified for type 410-SP-32 (8.50 m long) including painting with two coats of aluminium paint over one coat of red oxide primer, duly drilled hole 6 Nos at top portion of pole for fixing and including D clamp insulators complete all as specified and directed.
8
100
-
... More
Supply and fix single arm bracket of size 1m long and 70 mm dia complete all as specified and directed.
8
100
-
... More
Supply and fix double arm bracket of size 1 m long and 70 mm dia complete all as specified and directed.
1
100
-
... More
Supply, laying, connecting and testing PVC insulated, PVC sheathed, armoured LT electric power cable (heavy duty), copper stranded conductor 1100 volts grade size 1.5 sqmm 3 core, laid through duct/ pipe / in trench etc. including cable glands & lugs complete all as specified and directed
56
100
-
... More
S&F PVC cable Junction Box IP66 "halogen free and weather proof" for out door installation size 155 x 210 x 92 mm suitable for street light incoming and outgoing cables up to 16 sqm, including terminating and fixing arrangement complete all as specified and directed.
8
100
-
... More
Supply and fixing LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 10 KV of capacity 45W suitable to fix in 40mm dia GI bracket complete all as specified and directed.. Make:Crompton/Havells/Phillips/Wipro
8
100
-
... More
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) for coping of pole, as in benching including whitering slightly chamferred angles including necessary form work complete all as specified and directed.
0.1
100
-
... More
Supply and fixing/laying GI tubing light grade of size 40 mm bore with all fittings laid in trenches or fixed to wall for protection of cable complete all as specified and directed.
3
100
-
... More
M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed .
111.26
100
-
... More
S & F galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.
Note: Each line wire of fencing to be measured.
8.4
100
-
... More
Schedule of Credit
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%