Military Engineer Services Tender

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No 4 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm, complete all as specified and as directed.

All as per item No 4 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

All as per Item No 4 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 2.5 Sqmm copper cable FRLS & 1.5 Sqmm FRLS copper cable for earth continuity wire, complete all as specified and as directed.

S&F switch piano flush type 6 Amp single pole one way,complete all as specified and as directed.

S&F socket flush type 6 Amp 5 Pin, complete all as specified and as directed.

S&F switch socket combination 5 Pin 6 Amp universal, complete all as specified and as directed.

S&F switch socket combination 5 Pin, 6/15 Amp universal, complete all as specified and as directed.

S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body, complete all as specified and as directed.

S&F call bell, ding dong AC 230 volts, single pole, complete all as specified and as directed.

S&F bell push, flush type, 5 amp, complete all as specified and and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all,complete all as specified and as directed.

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour, complete all as specified and as directed. (Make:Havells ,Hager,Schneider or Legrands).

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour, complete all as specified and as directed. (Make:Havells ,Hager,Schineder or Legrands).

S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 240 Volt,4 way with built in160A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour, complete all as specified and as directed. (Make: C&S/Hager/Siemens/Legrand

M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 16KA,complete all as specified and as directed. (Make:Hager ,Schnieder or Legrands).9380

M&L for MCB, SP, 240V,40 Amps and ' B ' series breaking capacity 10 KA ISI marked,complete all as specified and as directed.

M&L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked, complete all as specified and as directed.

M&L for MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked,complete all as specified and as directed.

Supply and fix ceiling fan regulator electronic Step type, solid state, 120W, 2 module, 240 volts,complete all as specified and as directed.

S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket,complete all as specified and as directed. (Make - Havells Hager/legrand)

S&F in repair for wall mounted LED 4 feet 20 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed by Engr-in-charge. (Make :Crompton , Bajaj/Philips/Havells)

S&F in repair for wall mounted LED 2 feet 10 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed by Engr-in-charge. (Make :Crompton , Bajaj/Philips/Havells)

M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level0with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 25x4 mm as earthing lead by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I, complete all as specified and as directed.

Dismantling complete ceiling fan of size 1200/1400 mm sweep down rod with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan, taking out starter, motor winding, ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufractures design and directed and re-assembling (b)New spare parts (i.e) rubber bush of shackle and condenser housing, gun metal bushes, ball bearing, twin twisted copper cable shall be measured and paid separately under relevant item.

Supply and fixing rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan 1200/1400 mm sweep,complete all as specified and as directed.

Supply and fixing bearing number of 6201/6202/6203/6204 as required, Make : SKF/NBC or Eequivalent,complete all as specified and as directed.

Supply and fixing condenser 2/2.5 Mfd,complete all as specified and as directed.

Supply and fixing PVC holder for condenser housing,complete all as specified and as directed.

Supply and fixing twin core twisted copper flexible wire/cable of size 0.5 sqmm, single core,complete all as specified and as directed.

Supply and fixing only gun metal bush,complete all as specified and as directed. .

Taking down ceiling fan and Complete painting of ceiling fan by scraping with brush /removing old spray paint with the help of paint remover chemical and spray painting with two coat of synthetic enamelled paint with super glossy finish (grey/brown/white) with the help of spray painting machine and writing Ceiling fan Nos with paint and refixing the same,complete all as specified and as directed by Engr-in-charge.