Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/maint Of Dg Sets And Allied Equipments, Ups And Allied Works At Umroi Mil Stn Under Ge Umroi in Ri Bhoi, Meghalaya, with an estimated contract value of Rs. 15,40,000. The bid opening date for this tender is 10-11-2026 and the last date for bid submission is 01-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Meghalaya Tender

Opening Date10 Nov 2026
Closing Date1 Dec 2026
Tender Amount₹ 15,40,000 
Notes
Download

Costs

Summary

Repair/maint Of Dg Sets And Allied Equipments, Ups And Allied Works At Umroi Mil Stn Under Ge Umroi

Description

Repair/maint Of Dg Sets And Allied Equipments, Ups And Allied Works At Umroi Mil Stn Under Ge Umroi.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
S&F V belt cogged for alternator pulley to match with the existing model of DG set 10 KVA complete all as specified and directed.

1

-

-

... More
S&F V belt cogged for blower pulley complete to match with the existing model of DG set 10 KVA complete all as specified and directed.

1

-

-

... More
M&L for fuel injectors (FIP) of DG set 10 KVA including removal, dismantling, cleaning, inspection, calibration/ testing and cleaning on test bench, adjustment of fuel delivery and injection pressure as per manufacturer's specification, replacement of necessary parts, reassembly and testing of FIP at workshop complete all as specified and directed.

2

-

-

... More
Repair, preventive maintenance and servicing of DG set of capacity 25 KVA as per the OEM (Original equipment manufacturer) manual based on 200 hours run / 3 Month run of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of engine oil, cleaning the out door body and inner body, checking and setting the parameters of system after repair and reassembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note: (i) The spare parts for servicing shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. Engine Make: Kirloskar, Model No : HA394TCIG1

1

-

-

... More
Supply only complete service kit including air filte with air filter element, lube oil Filter, fuel filter to match with the existing model of 25KVA DG set complete all as specified and directed.

1

-

-

... More
S&F V belt cogged for alternator pulley to match with the existing model of DG set 25 KVA complete all as specified and directed.

1

-

-

... More
S&F V belt Cogged for blower pulley complete to match with the existing model of DG set 25 KVA, complete all as specified and directed.

1

-

-

... More
Repair and preventive maintenance, servicing of DG sets of capacity 40 KVA as per the OEM (Original equipment manufacturer) manual based on 200 hours run / 3 Month run of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of coolant and engine oil, cleaning the out door body and inner body, checking and setting the parameters of system after repair and reassembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note: (i) The spare parts for servicing shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. Engine Make: Ashok LeyLand

1

-

-

... More
Supply only complete service kit including air filter, lube oil Filter, fuel filter to match with the existing model of 40 KVA DG set complete all as specified and directed.

1

-

-

... More
Repair and preventive maintenance, servicing of DG sets of capacity 58 KVA to 62.5 KVA as per the OEM, manual based on 200 hours run / 3 Month run of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of coolant and engine oil, cleaning of fuel tank internally & externally, cleaning the out door body and inner body, checking and setting the parameters of system after repair and reassembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note: (i) The spare parts for servicing shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. Engine Make : Cotton Greaves/Ashok Leyland

3

-

-

... More
Supply only complete service kit including air filte, lube oil Filter, fuel filter to match with the existing model of 62.5 KVA DG set complete all as specified and directed.

3

-

-

... More
S&F V belt cogged for alternator pulley to match with the existing model of DG set 62.5 KVA complete all as specified and directed.

1

-

-

... More
S&F V belt Cogged for blower pulley complete to match with the existing model of DG set 62.5 KVA complete all as specified and directed.

1

-

-

... More
M&L for fuel injectors (FIP) of DG set 58 to 62.5 KVA including removal, dismantling, cleaning, inspection, calibration/testing and cleaning on test bench, adjustment of fuel delivery and injection pressure as per manufacturer's specification, replacement of necessary parts, reassembly and testing of FIP at workshop complete all as specified and directed.

2

-

-

... More
M&L for cleaning the fuel tank both internally and externally by removing all the dust/sediments etc including writing of tank capacity, date of cleaning and next due date for tank to be cleaning of DG Set 58 to 62.5 KVA complete all as specified and directed.

3

-

-

... More
M&L for cleaning and servicing of radiator, including removal of radiator top/ bottom covers, draining of coolant, cleaning and descaling of radiator tubes and fins using compressed air and suitable cleaning solution, removal of dust and dirt, oil deposits, foreign matter, forward to work shop for overhauling & brazing to arrest the leakage refixing it duly repaired etc of DG set 58 to 62.5 KVA complete all as specified and directed.

2

-

-

... More
M&L for tappet setting including replacement of gaskets and springs of DG set 58 to 62.5 KVA complete all as specified and directed.

2

-

-

... More
S&F fuel gauge to match with the existing model of DG set 58 to 62.5 KVA complete all as specified and directed.

1

-

-

... More
S&F fan belt to match with the existing model of 58 to 62.5 KVA complete all as specified and directed..

1

-

-

... More
Repair and preventive maintenance, servicing of DG sets of capacity 82.5 KVA as per the OEM, manual based on 200 hours run/ 3 Month run of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of coolant and engine oil, cleaning the out door body and inner body, checking and setting the parameters of system after repair and reassembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note:- (i) The spare parts for routine servicing shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. Engine Make : Kirloskar Green, Model no : 4H8901/1420055,

1

-

-

... More
Supply only complete service kit including air filter, lube oil Filter, fuel filter to match with the existing model of 82.5 KVA DG set complete all as specified and directed.

1

-

-

... More
S&F V belt cogged for alternator pulley to match with the existing model of DG set 82.5 KVA complete all as specified and directed.

1

-

-

... More
S&F V belt Cogged for blower pulley to match with the existing model of DG set 82.5 KVA complete all as specified and directed.

1

-

-

... More
M&L for fuel injectors (FIP) of DG set 82.5 KVA including removal, dismantling, cleaning, inspection, calibration/ testing and cleaning on test bench, adjustment of fuel delivery and injection pressure as per manufacturer's specification, replacement of necessary parts, reassembly and testing of FIP at workshop complete all as specified and directed.

1

-

-

... More
M&L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including writing of tank capacity, Date of cleaning, and next due date for tank to be cleaning of DG Set 82.5 KVA complete all as specified and directed.

1

-

-

... More
M&L for cleaning and servicing of radiator, including removal of radiator top/ bottom covers, draining of coolant, cleaning and descaling of radiator tubes and fins using compressed air and suitable cleaning solution, removal of dust and dirt, oil deposits, foreign matter, taking to work shop for overhauling & brazing to arrest the leakage refixing it duly repaired etc of DG set 82.5 KVA complete all as specified and directed.

1

-

-

... More
Repair and preventive maintenance, servicing of DG sets of capacity 125 KVA as per the OEM manual based on 200 hours run/ 3 Month of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of the coolant and engine oil, cleaning the out door body and inner body, checking and setting the parameters of system after repair and reassembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note: (i) The spare parts shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. (a) Engine Make : Crompton Greaves , Model No :4G11TAG26, (b)Engine Make : Kirloskar, Model No :4K1080TAG42,

2

-

-

... More
Supply only complete service kit including of air filter with air filter element, Lub Oil Filter, fuel filter complete to match with the existing model of 125 KVA DG set complete all as specified and directed.

2

-

-

... More
M&L for fuel injectors (FIP) of DG set 125 KVA including removal, dismantling, cleaning, inspection, calibration/ testing and cleaning on test bench, adjustment of fuel delivery and injection pressure as per manufacturer's specification, replacement of necessary parts, reassembly and testing of FIP at workshop complete all as specified and directed.

2

-

-

... More
M&L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including writing of tank capacity, Date of cleaning, and next due date for tank to be cleaning of 125 KVA DG set complete all as specified and directed.

2

-

-

... More
M&L for cleaning and servicing of radiator, including removal of radiator top/ bottom covers, draining of coolant, cleaning and descaling of radiator tubes and fins using compressed air and suitable cleaning solution, removal of dust and dirt, oil deposits, foreign matter, forword to work shop for overhauling & brazing to arrest the leakage refixing it duly repaired etc of DG set 125 KVA complete all as specified and directed.

1

-

-

... More
M&L for tappet setting, including replacement of gaskets and springs of DG set 125 KVA complete all as specified and directed.

2

-

-

... More
S&F water Pump to match with the existing model of 62.5KVA DG set complete all as specified and directed.

1

-

-

... More
S&F fan belt complete to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
S&F hose Clip complete to match with the existing model of 125KVA DG set complete all as specified and directed.

2

-

-

... More
S&F flexible Pipe to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
S&F water Hose Pipe to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
S&F water Pump to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
S&F AVR plate to match with the existing model of 62.5KVA DG set complete all as specified and directed.

1

-

-

... More
S&F alternator rubber coupling to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
Repair and preventive maintenance, servicing of DG set of capacity 400 KVA as per the OEM, manual based on 200 hours run/ 3 Month of the DG set, inspecting all the parts/portion for its serviceability of air intake system, fuel system, lubricating system, cooling system and electrical system, inspecting, tracing out the faults, dismantling, cleaning, replacement of defective parts, and fixing of serviceable parts/refixing exist serviceable parts, rectification of leakage of fuel and oil from any parts/body of DG set, checking and replacement of the coolant and engine oil, cleaning the out door body and inner body, checking and setting the parameters of system after repair and re-assembling including testing on completion to the entire satisfaction of Engr-in-Charge. Note: (i) The spare parts for servicing shall be measured and paid separately under relevent items of BOQ. (ii) The repair & servicing shall be carried out by the authorised service engineer of the manufacturer/company only. (iii) All spare parts shall be ordered to match with the existing model No of DG set all as directed. Engine Alt-583/6303/AL/19. Model No DV8TAG3, Make: Kirloskar

1

-

-

... More
Supply only complete service kit including of air filter with air cleaner safety element and air cleaner primary element, lub Oil Filter, fuel filter with O rings complete to match with the existing model of 400 KVA DG set complete all as specified and directed.

1

-

-

... More
M&L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including writing of tank capacity, Date of cleaning, and next due date for tank to be cleaning of DG set of capacity 400 KVA complete all as specified and directed.

1

-

-

... More
M&L for cleaning and servicing of radiator, including removal of radiator top/ bottom covers, draining of coolant, cleaning and descaling of radiator tubes and fins using compressed air and suitable cleaning solution, removal of dust and dirt, oil deposits, foreign matter, taking to work shop for overhauling & brazing to arrest the leakage refixing it duly repaired etc of DG set 400 KVA complete all as specified and directed.

1

-

-

... More
Dismantling the alternator from the Diesel generator of Capacity 62.5 KVA to 125 KVA set safely, transporting to the workshop if required, cutting the burnt out winding of the alternator including the insulation paper lining of the stator, Cleaning the stator and armature post, rewinding the armature or stator with same guage of copper wire of same thickness and have the same number of winds as of original winding for each set of coil precisely and compact without any unnecessary crimping or spacing, reassembling the alternator in the DG Set giving a trial run of the DG Set complete all as specified and directed to the entire satisfaction of Engr-in-Charge.

1

-

-

... More
Supply only coolant of existing make complete all as specified and directed.

352

-

-

... More
Supply only engine oil complete all as specified and directed.

380

-

-

... More
Supply only distilled water of standard make as directed by Engr-in-charge.

140

-

-

... More
M&L for repair/overhauling of self starter 12 Volts including replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc. and varnishing complete all as specified and directed.

1

-

-

... More
Supply only mineral oil based grease suitable for motors and similar applications in 10 kg plastic sealed container complete all as directed.

20

-

-

... More
M & L for repairing of Diesel Generator set of Capacity 62.5 KVA by checking Valve seat, valve guide, checking the circuit, instrument charging generator and starting motor in the power supply system, adjusting each system to restore the dynamic performance and fastening performance of diesel engine parts and calibration of engine parts to ensure good condition with replacement of following Parts like Upper Gasket- 02 Nos, Head Gasket- 02 Nos, Cylinder Liner- 04 Nos, Governor- 01 No complete all as specified and directed. Note: Cost of spare parts are deemed to be inclusive in the quoted rate.

1

-

-

... More
M& L for complete repairing of Diesel Generator set of Capacity 82.5 KVA by checking Valve seat,valve guide,checking the circuit, instrument charging generator and starting motor in the power supply system, adjusting each system to restore the dynamic performance and fastening performance of diesel engine parts and and calibration of engine parts to ensure good condition with Dismantling , replacement and Installing of following Parts like Delivery Valve- 04, cylinder Bearing- 02 Element -04, Governer Kit-01,Nozzle Testing- 04, Turbokit-01 Charger- 01 Nos all as specifed and directed. Note: Cost of spare parts are deemed to be inclusive in the quoted rate.

1

-

-

... More
M& L for complete repairing of Diesel Generator set of Capacity 125 KVA by checking Valve seat, valve guide, checking the circuit, instrument charging generator and starting motor in the power supply system, adjusting each system to restore the dynamic performance and fastening performance of diesel engine parts and calibration of engine parts to ensure good condition with dismantling, replacement and installing of following Parts like Delivery Valve- 04, Cylinder ring -04, Gasket Set-02, Nozzle Testing- 04, Turbokit-01 No complete all as specified and directed. Note: Cost of spare parts are deemed to be inclusive in the quoted rate.

1

-

-

... More
S&F AVR plate to match with the existing model of 125KVA DG set complete all as specified and directed.

1

-

-

... More
S&F AVR plate to match with the existing model of 400 KVA DG set complete all as specified and directed.

1

-

-

... More
Supply and fix Engine controller Panel Board for DG Set of Capacity 82.5 KVA for GENSET MODEL : KG/-82.5WS Make : Kirloskar (DSE6120MKII) along with complete wiring from the controller to Engine and alternator complete all as specified and directed.

1

-

-

... More
Supply and fix Engine controller Panel Board for DG Set of Capacity 125 KVA for GENSET MODEL : KG/-125KVA Make : Kirloskar along with complete wiring from the controller to Engine and alternator complete all as specified and directed.

1

-

-

... More
M& L for repairing of self starter and replacing solenoid and winding of the armature coil to the satisfaction of the Engr-in-charge including testing complete all as specified and directed.

1

-

-

... More
Supply only 12 Volt, 150 AH Battery suitable for 62.5 KVA to 320 KVA DG set having superior maintenance free characteristic, high charge retention characteristic, vent caps with advanced flame arrestors and micro porous filter disc to arrest acid fumes all as specified and directed by the Engr-in-Charge.

2

-

-

... More
Supply only SMF 12 Volt, 26 AH Battery suitable for UPS set having Superior Maintenance free characteristic, high charge retention characteristic, vent caps with advanced flame arrestors and micro porous filter disc to arrest acid fumes all as specified and directed by the Engr-in-Charge.

15

-

-

... More
Supply and fix fuel Sensor with thermostat for the DG Set of capacity 58 to 62.5 KVA of existing make complete all as specified and directed.

1

-

-

... More
Supply and fix fuel Sensor for the DG Set of capacity 82.5 KVA of existing make complete all as specified and directed.

1

-

-

... More
Supply and fix fuel Sensor for the DG Set of capacity 125 KVA of existing make complete all as specified and directed.

1

-

-

... More
Supply and fix Automatic Voltage Corrector for DG Set of capacity 125 KVA complete all as specified and directed.

1

-

-

... More
Supply and fix thermostat for the DG Set of capacity 82.5 KVA of existing make complete all as specified and directed.

1

-

-

... More
Supply and fix thermostat for the DG Set of capacity 125 KVA of existing make all as specified and directed by Engr-in-charge

1

-

-

... More
Supply and fix SMPS Battery Charger for lead acid battery for Engine start applications operating input range 170 to 270V forced air Cooled, low stand by Power consumption and high efficency for 125 KVA DG set all as specified and directed by Engr-in-charge

1

-

-

... More
Supply and fix onload changeover switch of Capacity 125 Amps conforming to IEC 60947-3 all as specified and directed.

1

-

-

... More
Supply and fix in repair Spare coil suitable for ML6 Type contact all as specified and directed.

2

-

-

... More
Supply and fix in repair 3 Pole Power contactors having AC 1 Ratings 160 Amps conforming to IS/IEC 60497 all as specified and directed by Engr-in-charge.

1

-

-

... More
Supply and fix in repair 3 Pole Power contactors having AC 1 Ratings 100 Amps conforming to IS/IEC 60497 all as specified and directed by Engr-in-charge.

1

-

-

... More
Supply & fix Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.

40

-

-

... More
S&F galvanised iron steel tubing, 40 mm bore, light grade with all fittings fixed complete to walls and ceiling or laid under floors complete all as specified and as directed.

10

-

-

... More
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, connecting to the galvanised iron earth strip 32x6mm size by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) type B-1 including reinforcement and one handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering, perforated at bottom, 1.75 m long placed on top edge of earth plate, charcoal and common salt filled 150 mm thick all around the earth plate with fixing arrangement, funnel wire mesh and earth work in any type of soil returning filling in and removal of surplus soil to a distance not exceeding 50 m all as per electical plate No 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

2

-

-

... More
M&L Earthing complete with Copper earth plate 60 cm x 60 cm x 3.15 mm thick electrode, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 m below ground level , connected to Copper earth strip 20 X 3 mm up to test point by means of bolts ,nuts , check nuts and washers of Copper including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 40 mm bore GI pipe light grade for protection of earth strip, MS angle iron frame 40x40x3mm, 10mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh etc complete as specified and directed .

2

-

-

... More
Supply only Herbicide/Weed Remover for Garden and outdoor Purpose near the surrounding of E/M Installations complete all as specified and as directed.

25

-

-

... More
Repair and preventive maintenance, servicing of RO Plant of Capacity 400 LPH including Cleaning Full system flush, tank cleaning and food-grade sanitization to remove bio-film and bacteria, Fix leaks, replace fittings, check booster pump pressure and SMPS for stable performance, On-site TDS, pH and flow-rate testing etc with replacement of following Parts. (i) Sediment, pre-carbon and post-carbon filters . (ii) Replacement of High-quality RO membrane all as specified and directed by Engr-in-charge LOCATION : Jackwell Pump House Note: Cost of spare parts are deemed to be inclusive in the quoted rate.

1

-

-

... More
Repair and preventive maintenance, servicing of UPS of Capacity 20 KVA including Cleaning and tightening all power connection at input and output terminals, at all breakers and at the terminal posts and post on the rectifier and inverter legs, checking all the power Cabling for abrasion, burn Posts, overheating, swelling, leaking, checking Printed circuit Board arrangement with replacement of following items all as directed and specified by Engr-in-charge:- (i) IGBT 600v/200a- 01 No suitable for and Upto 20KVA UPS (ii) Driver card -01 No suitable for and Upto 20KVA UPS (iii) SMPS card - 01 No suitable for and Upto 20KVA UPS . (iv) Output Sensor TX PCB (350V/20-0-20) - 01 No suitable for and Upto 20KVA UPS (iv) Input Sensor TX PCB (415V/20-0-20) - 01 No suitable for and Upto 20KVA UPS (v) Charger card 360V- 01 No suitable for and Upto 20KVA UPS (vi) Capacitor of suitable capacity - 03 Nos Note: Cost of spare parts are deemed to be inclusive in the quoted rate.

2

-

-

... More
Repair and preventive maintenance of 2 Ton E.O.T crane including servicing of main hoist brake drum, hoist motor, C7 gear box and brake assembly, inspection, servicing and adjustment of all limit switches, push button/ control switches, crane wheels and wheel assemblies, checking and servicing of LT gearbox, LT motor and associated mechanical/ electrical components, inspection, repair/ replacement of defective electrical componants and complete control panel wiring, including proper termination and connections. The work shall include checking of power supply, contactors, relays, overload protection and control circuits, lubrication of all required mechanical parts, tightening of electrical / mechanical connections, functional testing and load testing of the crane after completion of repairs and handing over the crane in safe serviceable and fully operational condition to Engr-in-charge. Note- (i) All minor items, consumables, labour, tools, tackles, testing equipments and other incidental requirements necessary for satisfactory completion of the work shall be deemed included un the quoted rate. (ii) Supply & fixing of major items, if any required will be measured and paid separately.

1

-

-

... More
Supply only 63 A 3P 110VAC Contactor.

1

-

-

... More
Supply only 40 A 3P 110VAC Contactor.

1

-

-

... More
Supply only 1 NO 1 NC Add Block.

1

-

-

... More
Supply only 32 A 3P 110VAC Contactor.

1

-

-

... More
Supply, installation, testing and commisioning of AMF panel for 62.5 KVA DG set CPRI approved factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, angle iron frame of size 50x50x6 mm and minimum staging height not less than 0.5 m duly fabricated and having proper locking arrangement in both front and rear door painted with powder coated paint and provision of aluminium bus bar 110 amp suitable for 415 V (+- 10%), 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounting on PCC platform having offset 1 m all around the panel board complete with the following items :- Outgoing: (i) MCCB, 4 Pole, 200 A, 415 V 36 KA ( Thermal Magnetic Release, Adjustable overload 80-100%).- 02 Nos Incoming: (i) Power contactor (AC1 - heavy duty) 4 Pole, 110A, 415 V, 16 KA with auxilary contact (NC & NO) and overload realy (with moountings) - 02 Nos (ii) DIN type HRC fuse link 125 Amp - 06 Nos (iii) CTs 200/5 Set of three - 01 Set (iv) Digital controller with microprocessor based AMF panel with complete accessories (DC on/ off control, digital meter, MCB, relay, battery charger, timer switch, voltage monitor relay, reverse power protection relay) -01 No (v) Phase indicator lamps (RYB), battery charger, on load), set of 03 - 03 set (vi) Aluminium bus bar 4 strip of 125 amps (vii) Internal wiring with aluminium strip of suitable size for panel including insulators, sleeves etc. (viii) Painting as per CPRI norms. (ix) PCC foundation of suitable size in PCC 1:3:6 type C2.

1

-

-

... More
Supply, installation, testing and commisioning of outdoor type feeder panel of suitable size for 125 KVA DG set CPRI approved factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, angle iron frame size 50x50x6 mm and minimum staging height not less then 0.5 m duly fabricated and having proper locking arrangement in both front and rear door painted with powder coated paint and provision of aluminum bus bar 400 amp suiable for 415 V (+- 10%), 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounting on PCC platform having offset 1 m all around the panel board complete with the following items :- Incoming: (i) MCCB, 4 Pole, 250 A, 415 V 36 KA (Thermal Magnetic Release, Adjustable type overload 80-100%) - 01 No. Outgoing: (i) MCCB, 4 Pole, 200 A, 415 V 36 KA ( Thermal Magnetic Release, Adjustable type overload 80-100%) - 01 No. (ii) MCB, TPN, 63 A, 415 V 36 KA (O/G)- 02 Nos (iii) Changeover switch (Manual) 415 V, 4 Pole - 200 Amp (iv) CTs 200/5 Set of three -01 set (v) Digital voltage controller with real time monitoring of voltage(line to line, line to phase), current (excitation, load current), frequency(Hz) and protective function (DC on/ off control, digital meter, MCB, relay, phase indicator lamp) - 01 No (vi) Phase indicator lamps (RYB), battery charger, on load), set of three - 03 Set (vii) Aluminium bus bar 4 strip of 400 amps (viii) Internal wiring with aluminium strip of suitable size for panel including insulators, sleeves etc. (ix) Painting as per CPRI norms (x) PCC foundation of suitable size in PCC 1:3:6 type C2.

1

-

-

... More
Schedule of Credit

-

-

-8721



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.