Medical Health And Family Welfare Department Tender

Half brick masonry with common burnt clay (non modular) 1stclass bricks in foundations and in plinth: (b) Cement mortar 1:4 (1 cement:4 coarse sand)

SHUTTERING/ FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel)

SHUTTERING/ FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge Slabs, roofs, landings, balconies and access platform, shelves (using steel)

SHUTTERING/ FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge Foundations, footings, bases of columns, etc. for mass concrete (using steel)

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) (c) Thermo-Mechanically Treated bars

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: (b) M20 or 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage & water treatment plant, tunnels/ subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling, grouting and finishing complete as per direction of Engineer-in-charge

12 mm cement plaster of mix: (a) 1:4 (1 cement: 4 fine sand)

20 mm cement plaster of mix: (a) 1:4 (1 cement: 4 coarse sand)

Supplying and fixing C.I. cover without frame for manholes: (c) 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: New work (two or more coats)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (vi) 50 mm nominal outer diameter Pipes

PVC pipe 110 mm dia of 6 m

PVC elbow

PVC coupler

PVC Tee 110mm

PVC pipe 63 mm of 6 m

PVC reducer 110 x 63 mm

CPVC solvent cement 473 ml

PVC solvent cement 1000 ml

Alluminium patti

PVC gutka 38 mm

SS screws

Supply and fitting of rain water harveting filter

Supply and fitting of electrical items including wiring etc and 1 no horizontal submersible pump 7.5 HP etc complete as per requirement (material & labour)

Supply and fitting of electrical items including wiring etc and 1 no horizontal submersible pump 5 HP etc complete as per requirement (material & labour)