Border Security Force Tender

Supplying and fixing 6 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.. Make:-L&T/Havells/Schenider

Instalaltion of cable termination box /SMC box including 02 nos GI clamp Size 670 mm x 20 mm x 5 mm thick with suitable size nut, bolts and wahser etc as required for fixing of SMC Box on Existing street light Pole complete in all respect.

ITC of otdoor type double door cubical panel made of 2mm thick CRCA sheet of size not less than 900(w) x 1200 (h) x 450(d) MM suitable for 415 Volt, 3 phase 50 hz power supply cofirming to IS 5093-1983 complete with hinged doors, having locking arrangement and providing detachable gland plate of thickness 3mm at the bottom, earth bar/ stud, cable alley, Aluminium busbar of suitable size as per CPWD norms as required.. All sheet matel parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in Siemens Grey shade RAL 7032 and supplied with suitable pedastal of 50mm x 50 mm x 5 mm angle iron frame with 4 Nos 600mm long legs with suitable apron all around. The Panel Shall be embeded in 1:3:6 cement concrete foundation of required shape and size 30 cms below ground level including finishing etc as required as per direction of engg-in-charge. (Make of panel - CPRI approved only) (Drawing to be got approved from department before fabrication). The panel should have suitable provision for fixing of following switchgears (a) Incommer- 63 Amp MCCB -01 No (b)Outgoing- 06 Nos 40 Amp DP MCB However,Switchgear will be provided by the department.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal/ coke and salt ) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in same tranch in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), ncluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil For one pole Volume= LXBXH 1X(0.60X0.60X1.30)= 0.47 cum for 38 Pole= 38X0.47=17.86

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) for one pole Volume = LXBXH 1X ( 0.60X.60X1.20)=0 .43 cum for 38 Pole= 38X0.43= 16.34 cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) for one pole Volume = LXBXH 1X( 0.60X.60X0.20)= .07 cum for 38 Pole= 38X.072= 2.74 cum

Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts For one pole = (LXBX4) Sq.mm = 1X(4X.60X.10)= 0.24 Sq.mm For 38 Pole= 38 X0.24 = 9.12 Sq.mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 08 mm steel bars Total Length = 600X4= 2400 mm (2.4 mtr) Weight of 01 ring= 2.4X0.39= .94 Kg Weight of 08 ring= 8X.94= 7.52 Kg 12 mm steel Bars Total Length = 1500X8= 12000 mm (12 mtr) Weight = 12X0.88= 10.66 Kg total Bars weight = 18.18 Kg for one pole For 38 Pole= 38 X18.18 = 690.84 kg

SITC of cubical type outdoor feeder pillar made of 2mm thick CRCA sheet of size not less than 1200(w) x 1000 (h) x 450(d) MM suitable for 415 Volt, 3 phase 50 hz power supply cofirming to IS 5093-1983 complete with hinged doors, having locking arrangement, detachable gland plate of thickness 3mm at the bottom, earth bar/ stud, and Aluminium busbar of suitable size having current capacity of 400A as per CPWD norms as required. All sheet matel parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in Siemens Grey shade RAL 7032 and supplied with suitable pedastal of 50mm x 50 mm x 5 mm angle iron frame with 4 Nos 600mm long legs with suitable apron all around. The Feeder Pillar Shall be embeded in 1:3:6 cement concrete foundation of required shape and size 30 cms below ground level including finishing etc as required as per direction of engg-in-charge. (Make of panel - CPRI approved only) (Drawing to be got approved from department before fabrication) The panel should have suitable provision for fixing of following switchgears (a) Incommer- 250 Amp 4 Pole MCCB -01 No (b)Outgoing- (i) 125 Amp 4 Pole MCCB -03 No (i) 125 Amp 4 Pole MCCB -02 No However,Switchgear will be provided by the department.

SITC of cubical compartmentalised main control switchgear panel made of 2mm thick CRCA sheet of size not less than 2600(w) x 2100 (h) x 600(d) MM suitable for 415 Volt, 3 phase 50 hz power supply complete with hinged doors, having locking arrangement and providing detachable gland plate of thickness 3mm at the bottom, earth bar/ stud, cable alley, Aluminium busbar of suitable size as per CPWD norms as required. All sheet matel parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in Siemens Grey shade RAL 7032 and supplied with suitable pedastal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 600mm long legs with suitable apron all around. The Panel Shall be embeded in 1:3:6 cement concrete foundation of required shape and size 30 cms below ground level including finishing etc as required as per direction of engg-in-charge. (Make of panel - CPRI approved only) (Drawing will be approved from department before fabrication). The provision of following switchgear should be incorporated in panel (a) Incommer= (i) 630 Amp 4Pole MCCB-01 No., (ii) 630 Amp 4Pole Changeover switch-01 No , (iii)250 Amp 4 Pole MCCB-01. No (b) Outgoing: (i) 320 Amp 4 Pole MCCB-01 No, (ii) 250 Amp 4 Pole MCCB -04 Nos, (iii) 200 Amp 4Pole MCCB -05 No., (iv) 160 Amp 4 Pole MCCB -02 Nos, (v) 125 Amp 4 Pole MCCB -02 Nos (vi) 100 Amp 4 Pole MCCB-02 Nos However,Switchgear will be provided by the department.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3.5 x 240sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (b) 3.5 x 185 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (b) 3.5 x 120 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (b) 3.5 x 35 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 2X16 sqmm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.