Border Security Force Tender

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Providing and fixing G.I. barbed wire. Of size 2.5mm x 2.0 mm type a lowa type (weight to be not less than 108 gms per meter length), conforming to I.S. code to I.S. code 278 duly dipped in anticorrosive bitumastic paint horizontal rows ( 16 rows in vertical portion and 7 rows in slanting portion ) and stretched with M.S. Hooks/ tightening bolts. and also properly inter woven with two sets of cross diagonals each as per drawing (one on vertical portion and other on slanting potion) with G.I barbed wire of same specifications, fixing each row of barbed wire to intermediate angle iron post between tightening bolts with split cotter pins of size 5x22 (conforming to IS-549 steel), including applying three coats of alkyd zinc phosphate primer/paint of approved brand and manufacture (first coat in red oxide colour, second coat in grey colour and top coat in black colour ) on tightening bolts, hooks & cotter pins, nuts, washers & bolts, bolts, all as per direction of Engineer-in-charge. IND & BD SIDE.