Border Security Force Tender

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above35 sq mm and up to 95 Sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above95 sq mm and up to 185 Sq mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. a)upto 35 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. upto 35 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above35 sq mm and up to 95 Sq mm

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required (50 mm dia)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required (80 mm dia)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3.5 x 120 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (b) 3.5 x 70 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (c) 3.5 x 50 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (e) 4C x 25 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (f) 2C x 16 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE aluminium conductor cable of 1.1 KV grade as required. (g) 2C x 25 sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the 100 existing trench, complete as required. 63 mm dia (OD-63 mm & ID- 51 mm nominal).

S/D of 3X1.5 sqmm FR PVC insulated copper conductor in existing pole as reqd. wire make Finolex/Polycab/HPL

S/D of 6X1.5 sqmm FR PVC insulated copper conductor in existing pole as reqd. wire make Finolex/Polycab/HPL

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).A) 12 way double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single poles in the existing MCB DB complete with connections, testing and commissioning etc as required. (Make:Havells/ Legrand/ ABB /Schenider/ c&s)

Supplying and fixing 63 amps rating, 240 volts, "C" curve, double pole mcb with DIN rail suitable for inductive load of following poles in the feeder pillar box complete with connections, testing and commissioning etc. as required. Make:-L&T/Havells/Schneider/C&S

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV/LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying, Fabricating & fixing of bracket having provision of fixing 3 nos LED flood light size 100 mm X 50mm X50 mm size 50 mm thick U shape channel with 50 mm nut & with 40/50 mm thickbase clamp,nut bolts etc.as required Make approved brand TATA/Jindal/ISI mark.

Installation, testing & commissioning LED street light/Post top lantern/Solar Street Light/Flood Light on exisitng pole with allied accessories etc as required as per direction of engg-in-charge.

Installation testing and commissioning of various capacity MCCB/Changeover switch in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt las required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc, as required.

Supplying, Installation, Testing & Commissioning of out door type sheet moulding compound (SMC) pole mounted cable end termination/ junction box (IP-65) of size 200 x 140 x 95 mm) make- Sintex/Hensel with connector terminal (16/25 sq mm) hinge type lockable door complete with 2 sets of 25 mm X 3 mm thick GI strip clamp for mounting on pole/ street light standard with 2 No. 6 Amps, 10KA SPN MCB ‘C’ series(Make- Havells/C&S/Schineder/Legrand/L&T etc. as reqd.

Supplying, fabrication, installation of compound light pole 4.5 mtr height made out of 65 mm dia medium class ISI marked GI pipe with 300 mm x 300 mm x6 mm thick MS base plate including errection in cement concrete 1:3:6 (1 cement , 3 coarse sand, 6 graded stone aggregate (40 mm nominal size) foundation with cement concrete collar of size 0.4 m dia x 0.5 mtr (mini.) height i/c excavation and refilling , painting the exposed surface with two or more coats of superior quality aluminium paint etc as required.GI pole make- Jindal/Nezone/tata/Utkarsh/Bajaj

Supplying, installation, testing and commissioning of size 1700 mm x 1200 mm x 400 mm (L x H x D) (Front Area of One Panel- 2.04 Sqmtr) CPRI approved outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 2 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 400 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and provision for mounting on suitable pedestal made angle iron frame, fixing of 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring, suitable size spreder link for output with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including provision to accomodate following switchgears, fixing LED phase indicator and accessories as per following etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 30 cm above the ground level. Pedastal and Switchgear will be provided by Deptt. However Panel should have provision for fixing of following switchgears (a) Incomer:- (i) 125 Amp 4 pole Changeover switch- 01 No (ii) 125 Amp 4 pole MCCB -02 No (b) Outgoing- (i) 100 A 04 Pole MCCB -02 Nos (ii) 63A 04 pole MCCB-02 Nos iii) 63 A 02 Pole MCCB-02 Nos iv)40 Amp 2Pole- MCCB-02 Nos v) 3 Phase LED Ammeter -1 No. vi) 3 Phase LED Voltmeter - 1 No. vii) CTs 200/5A, - 3 Nos. viii) LED Indicating Lamps, In R,Y,B Colours - 03 No. ix) 6 Amp MCB "C" Series-03 Nos x) 40 Amp DP 10 KA MCB " C" series-04 Nos xi) Astri Time Switch-01 No xii) Auto Manual Selector Switch-01 No xiii) MNX 70 Amp, TP, Power Contactor-01 No

Supplying, installation, testing and commissioning of size 1400 mm x 900 mm x 400 mm (L x H x D) (Front Area of One Panel- 1.26 Sqmtr) CPRI approved outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 2 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 400 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and provision for mounting on suitable pedestal made angle iron frame, fixing of 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including provision to accomodate following switchgears, fixing LED phase indicator and accessories as per following etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 30 cm above the ground level. Pedastal and Switchgear will be provided by Deptt. However Panel should have provision for fixing of following switchgears. (a) Incomer:- (i) 100 Amp 4 pole MCCB -01 No (b) Outgoing- (i) 63A 02 pole MCCB-04 Nos ii) 3 Phase LED Ammeter -1 No. iii) 3 Phase LED Voltmeter - 1 No. iv) CTs 200/5A, - 3 Nos. v) LED Indicating Lamps, In R,Y,B Colours - 03 No. vi) 6 Amp MCB "C" Series-03 Nos

Providing and fixing following length 50 mm x 50 mm x 6 mm angle iron frame with 600 mm long legs pedestal for the existing cubicle panel board including drilling holes/ riveting / nut bolting/ sweating and soldering etc complete as required.

Providing and fixing following acessories in the existing panel etc as required. i) 3 Phase LED Ammeter CL-0.5 (0-250 A) (Make :- L & T or other equivalent ISI marked reputed brand) -

Providing and fixing following acessories in the existing panel etc as required. 3 Phase LED Voltmeter CL-0.5 (0-500 V) (Make :- L & T or other equivalent ISI marked reputed brand)

Providing and fixing following acessories in the existing panel etc as required. CTs 200/5A, Acurracy Class-1, Burden- 10 VA

Providing and fixing following acessories in the existing panel etc as required. LED Phase Indicating Lamps, In R,Y,B Colours (Make :- L & T or other equivalent ISI marked reputed brand)-

Providing and fixing following acessories in the existing panel etc as required. 6 Amp MCB "C"

Providing and fixing following acessories in the existing panel etc as required. 40 Amp DP 10 KA MCB " C" series

Providing and fixing following acessories in the existing panel etc as required. Astro Time Switch of L&T or equivalent make

Providing and fixing following acessories in the existing panel etc as required. Auto Manual Selector Switch/Changeover Switch of L&T or equivalent make

Providing and fixing following acessories in the existing panel etc as required. Automation Power contactor with spare coil, MNX-70,CS94192 of L&T or equivalent make