Assam Rifles Tender

Providing and fixing G.I. pipes of 25mm dia complete with G.I. fittings including takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge (Note as per site condition).

Providing and fixing gun metal gate valve of 25mm nominal bore with C.I. wheel of approved quality.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 25mm nominal dia, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement complete as per direction of Engineer in Charge.

Supply & fixing of CPVC ball valve of 25mm dia with all accessories

Supply & fixing of CPVC Union 25mm dia

Supply and fixing of Cast Iron Non Rising Sluice Valve 80mm dia PN 10 Rating Flanged End As Per IS : 14846 Body,Dome,Wedge- CI IS:210, Gr. FG260 Body & Wedge Rings- Bronze IS:318 Gr. LTB2 Spindle- SS IS:6603, Gr.12Cr12 Gland Packing- Greasy Jute Packing Fasteners- CS IS:1367, CL-4.6/4.0 Gasket Natural Rubber Flange Drilling - IS:1538,Make : Kirloskar/Kartar/RMCO or ISI Approved By Accepting Offrs

Supply and fixing of C. I. Swing Type Non Return Valve Flanged End 80mm dia As Per IS : 5312 Body,Cover- CI IS:210, Gr. FG260 Door- CI IS:210, Gr.FG260 Body Ring- Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin- SS ASTM A276 Type 410 Fasteners- CS IS:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538, ,Make : Kirloskar/Kartar/RMCO or ISI Approved By Accepting Offrs

M&L for fabrication of outdoor type electrical panel board 415 volt ,3 phase, 4 wire system ,cubical, dust and vermin proof with base frame made out of CRCA sheet of 2 MM thick of size 1150X1250X450MM with front opening of aluminium bus bar suitable for 630 amperes capacity and half for neutral on PVC/FRP insulated pads and panel board duly painted with two coat of metal powder coated paint of good approved quality including digital metering , volt meter selector switches, power indicator RYB LED lamps and Current Transformer of suitable ratio with consisting the following electrical fitment and making space and mounting arrangement for incoming/outgoing switch gears including necessary fixing/grouting arrangement on existing floor and trench and connecting all the disconnected underground power cables including lugging and ,crimping and cable glands where ever requires with testing and commissioning to the entire satisfaction of Engr-in-Charge :-embeded in PCC 1:4:8 type D-2 using 40mm graded stone aggragate of foundation as per manufacture instruction complete all as specified and directed comprising of the following controls. i) MCCB 250 Amps 4Pole FEH Frame : Microprocessor MCCB Ics 75% of Icu 50KA . Make : Havells-01No (Incoming) ii) MCCB 160 Amps 3Pole FEN Frame : Microprocessor MCCB Ics 100% of Icu 35KA . Make : Havells iii)MCCB 100 Amps 3Pole FEN Frame : Microprocessor MCCB Ics 100% of Icu 35KA . Make : Havells-04Nos iv) Digital Volt Meter (o to 500Volt)-06 Nos, vi) Digital Amper Meter (0 to 600Amps) - 06Nos vii) CT 400/5A, Tape wounded, Cl-1 -01Set. viii) Selector Switch-12Nos. ix) Indicator Lamp (set of Three)-01 Set

Supply only for LT UG Armoured cable 120Sqmm 3.5Core. Make : Havells/Polycab/KEI/ Gloster