Assam Rifles Tender
View complete overview of Meghalaya Assam Rifles Tender
Assam Rifles Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 May 2024
Closing Date3 Jun 2024
Tender Amount₹ 3,79,84,028
Costs
EMD
₹ 7,60,000Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ARMHA_807875_1Bid Award Id
ViewTender No
ENG/III-235/2024-25/05 dated 17 May 2024Tender Authority
Assam Rifles ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of 12 Nos single Offrs accn (GI) with allied infra and development work at Laitkor Grn
Construction of 12 Nos single Offrs accn (G I) with allied infra and development work at Laitkor Grn
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
181.17
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size)
53.14
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
0.71
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
29.44
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
29.44
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
81.6
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Foundations, footings, bases of columns, etc. for mass concrete
110.05
-
-
Centring & shuttering inclduing strutting, propping etc removal of from for all heights Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc
94.28
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Columns, Pillars, Piers, Abutments, Posts and Struts
367.64
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
6.14
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Edges of slabs and breaks in floors and walls Under 20 cms wide
299.2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform.
902.12
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers.
344.28
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.50 mm thick
62.1
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
20100
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
128
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
62.36
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level
140
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
268.69
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
29.24
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
100
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
299.79
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
299.79
-
-
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
109
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm
30.24
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
43.2
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
6
-
-
Float Glass Panes 4mm thick glass pane (weight not less than 10 kg/sqm
66.42
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
14
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of
shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
94.5
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of
shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
30.24
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
94.5
-
-
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
94.5
-
-
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters Kiln seasoned and chemically treated hollock wood
70.2
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
1195.56
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 12 mm mild steel U beading
66.42
-
-
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm
72
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
96
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
96
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
60
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
18.9
-
-
Providing and fixing factory made UPVC white/ colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
66.42
-
-
Providing and fixing factory made UPVC white/ colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
5.4
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Fixing with adjustable lugs with split end tail to each jamb Profile C
268.2
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
36
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
118.51
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
14
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
26.4
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
292.07
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
658
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
66
-
-
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: 12.19.1 With common burnt clay F.P.S. (non modular) brick tiles of class designation 10
450
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
24
-
-
12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)
1147.44
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
1656.07
-
-
6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
902.12
-
-
White washing with lime to give an even shade : New work (three or more coats)
902.12
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats
1147.44
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1656.07
-
-
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
470.45
-
-
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
73.42
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
527.34
-
-
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work
38.4
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of a):Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.b)IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.c)IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.d) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
21.06
-
-
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
450
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :150 mm
120
-
-
Providing and fixing aluminium door buffer of approved make, design and colour with necessary screws etc all complete as directed and specified by the Engineer-in-Charge :
48
-
-
Providing and laying 1st quality ceramic glazed Anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) conforming to IS:15622 in all colours, shades, sizes as approved over 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc complete in all respects as per specifications/drawings and to the entire satisfaction to the Architect.
100.26
-
-
Granite work (polished and machine cut) of thickness 18mm for wall lining (veneer work) backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade: (To be secured to the backing by means of cramps, which shall be paid for separately).Granite of any colour and shade
11.19
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3705.63
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia
90
-
-
SCHEDULE ‘A’ PART-II PLUMBING WORK (SCHEDULE OF ITEMS) (Make to be approved by SO1 (wks)/ Comdt ARC&MC as applicable)
-
-
-
Providing and fixing wall mounted, white vitreous china single piece, double traps syphonic water closet of make Jaquar Cat no. LYS-WHT-38851S220 or P or equivalent of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
12
-
-
P/F super special colours Ovel shape counter wash basin of make CERA, jaquar or equivalent including making all connections and CP waste jali. Flat back wash basin of size 560X400mm.
12
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink make jaquar or equivalent as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
12
-
-
Providing and fixing CP brass two way bib cock with flange of jaquar make category no. VGP81041 or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass central hole basin mixer system with 450mm long barided houses make jaquar category no. VGP-81011B or equivalent complete as per direction of engineer in charge.
96
-
-
Providing and fixing 8mm thick bevelled edge mirror of superior glass of approved quality & make complete with 12mm thick commercial ply ground fixed with special spacer of Ozone at corners all as per direction & satisfaction of Engineer-in-charge
12
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length
96
-
-
Providing and fixing CP brass bottle trap of jaquar make category no. ALD769 or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass hand shower (Health fauce) with 1m long tube and wall hook of jaquar make category no. ALD573 or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass Wall mixer for bath & shower of jaquar or equivalent make including cutting, fixing & making good the walls all as per direction and satisfaction of engineer in charge.
12
-
-
Providing and fixing C.P. Hand shower make jaquar or equivalent with 15 or 20 mm inlet : 150 mm diameter
12
-
-
Providing and fixing CP brass towel ring jaquar or equivalent make category no. AKP-35721P or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass towel rail jaquar or equivalent make category no. CAN-CHR-1111 SM or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass soap dish of jaquar category no. ACN1131N or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing CP brass Toilet Paper holder make jaquar- 1151N or equivalent complete as per direction of engineer in charge.
12
-
-
Providing and fixing P.V.C. WASTE COUPL 32mm for sink or wash basin including P.V.C. waste fittings complete.cat bo. ALD-CHR-705 make jaquar or equivalent
12
-
-
Providing and fixing liquid soap container make jaquar or equivalent 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
13
-
-
Providing and fixing Hand dryer of approved colour wall mounted as approved of make of Jaquar Model No. HDR-SAP-M99ACS or equivalent including fixing in position as per magnifacture specification and the direction of Engineer-in-charge.
14
-
-
Providing and fixing soap dispencer of jaquar category no. 1135N or equivalent complete as per direction of engineer in charge.
15
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
48
-
-
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 127 mm.dia
24
-
-
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 101 mm.dia
12
-
-
Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap). 110 mm inlet and 110 mm out let
24
-
-
Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III)-IS:4985 inlet fitting approximately upto 300mm long above the trap with one or more 40 OD/ 50OD/63 OD/75OD holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete.
12
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen). 110 mm outer dia
72
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including GI supports, cutting and making good the walls wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, balcony waste & rain water pipes) 75 mm outer dia
70
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including GI supports, cutting and making good the walls wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, balcony waste & rain water pipes) 110 mm outer dia
154
-
-
Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B., Sink, floor drains etc. 40 mm outer dia
18
-
-
Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B., Sink, floor drains etc. 63 mm outer dia
18
-
-
Providing and fixing floor drain (FD) with 75mm outlet and 100 mm inlet with PTMT grating having 19mm seal for indirect floor drain (FD).
12
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Inernal work - Exposed on wall 20 mm nominal outer dia Pipes
42
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Inernal work - Exposed on wall 25 mm nominal outer dia Pipes
42
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
288
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm dia nominal bore
24
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm dia nominal bore
12
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm dia nominal bore
1
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore
1
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm
20
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32 mm
10
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40 mm
288
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm
28
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
12000
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :150 x 100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
-
SCHEDULE ‘A’ PART-III INTERNAL ELECTRICAL WORK (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
M&L for Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in conceled/ surface / recessed PVC conduit or Caping-N-Casing with and including modular switch, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required all as specified and directed (Group C)
360
-
-
M&L for Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit or caping-N-casing including 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required
4
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Note :Power Point)
1440
-
-
Suplying and fixing following modules swithch/ socket on the existing modules plate & switch box including connetions but excluding modules plate etc as requied. (a) 15/16 amp switch
96
-
-
(b) 3 pin 5/6 amp socket outlet
70
-
-
(c) 3 pin15/ 16 amp socket outlet
96
-
-
Supplying and fixing fowlloing size/ modules GI box along with modules base & cover plate for modular swithes in recess etc as requied. (a) 1 or 2 module (75mmx75mm)
12
-
-
(b) 3 modules (100mmx75mm)
30
-
-
(c) 4 modules (125mmx75mm)
166
-
-
(d) 6 modules (200mmx75mm)
24
-
-
(e) 8 modules (125mmx125mm)
24
-
-
Supplying and fixing 3 pin 5amp ceiling rose on the existing junction box/ etc as requied .
150
-
-
Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order.(ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order (For Main DBs) (iii) Item includes the cost of Charcoal and commercial salt.
2
-
-
Supplying and fixing PVC batten / angle holder incl connection as reqd complete all as specified and directed
48
-
-
Supplying and fixing following way single pole and neutral, sheet steel MCB distribution board 240 valts on surface/recess complete, with tinned copper bus bar, neutral bus bar, earth bar, din bar,inter connection , powder pointed including earthing etc as requied (But with out MCB/RCCB/Isolater) (a) 6 way double door
12
-
-
(b) 8 Way double door
12
-
-
Supplying and fixing of following ways surface/recess mounting,verticle type 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 Amp tinned copper busbar,common neutral link,earth bar, din ba for mounting MCBs and incomer) as requird.(Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.). 4Way (4 + 12) double door
2
-
-
S&F in replacement of MCB 'C' Curve type, 10 kA, 5 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.
120
-
-
All as srl item above but of 40 amps capacity and SPN type.
24
-
-
All as srl item above but of 63amps capacity and SPN type.
12
-
-
Supply and fixing of rating four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as reqd but of 100 amps capacity
2
-
-
Wiring for circuit/ submain wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed..
360
-
-
Wiring for circuit/ submain wiring along earth wire with the 2x6 sq mm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed..
480
-
-
fixing only pre-wired light fittings of LED/ flurecent/compact fluoverscent fitting with all accessories on ceiling/wall including connetion with 1.5 sqmm FRLS PVC insulated, copper inductor, single core cable and earthing etc as rwquied all as specified and directed. Note : Light fittings will be under Sch "B" store.
120
-
-
Fixing only Exhaust fan of any sweep/type incuding making all electric connections complete all as specified and directed.Note : Exhaust fan will be issued under Sch "B" store
24
-
-
Supply only LUMILINE NEO Basic all purpose surface and wall mounted LED batten 20Watts with polycarbonate housing & integrated electronic driver.Make : Havells LUMILINENEOBS20WLED865SPCWH Bajaj/CG
120
-
-
Supply only Exhaust Fan Steel/PLastic Body 300mm sweep Heavy Duty 900RPM . Make : Crompton/Usha/Bajaj
24
-
-
Supply and installation of LED 15watts Surface Light fittings . Make : Havells/Bajaj/CG
20
-
-
Supply and installation of LED Bulkhead fitting 10Watts . Make : Havells/Bajaj/CG
9
-
-
Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated
36
-
-
Supply and installation of Geyser 50Ltr Capacity with PVC Connection Pipe complete all as specified and directed by Engr-In-Charge
12
-
-
Supply and installation of instant Geyser 3Ltr Capacity with PVC Connection Pipe complete all as specified and directed by Engr-In-Charge
12
-
-
SCHEDULE ‘A’ PART-IV EXTERNAL ELECTRICAL WORK (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Supply and installation of copper wound transformer step up/ step down, indoor/outdoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity 200KVA Note: Cost of RCC Foundation for Transformer and Cattle fencing (1.5m high) around is included in above rates.
100
-
-
Supply and erect 2 pole structure on 11 meter steel Tubular pole consisting of anti climbing device, PCC foundation & cross arms etc with connected items all as specified and directed by Engr-in-Charge.Note: Cost of 2 Pole structure only include cost of pole, foundation and steel bracings but does not include cost of Gang Operated device,earthing,LA etc.
1
-
-
Supply and fix HT 11 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complete with drop out fuse having 12 insulators of rating upto 400 Amps including suitable size of cross arm bracing support with connected items all as specified and directed by Engr-in-Charge. Note:— Cost of GOD includes cost of GI pipe required for operation
1
-
-
Supply, laying & testing ARMOURED XLPE CABLE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3Core 95Sqmm
210
-
-
Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 3core 95sqmm
2
-
-
Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order.(ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order (For Main DBs) (iii) Item includes the cost of Charcoal and commercial salt.
1
-
-
Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and Directed by Engr-In-Charge.
1
-
-
Supply and fix lightning arrestor HT 11 KV 10 KA station class and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required complete all as specified and directed by Engr-In-Charge.
1
-
-
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. complete all as specified and Directed by Engr-In-Charge.
6
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and Earth pit chamber . Noted : Copper Earthing for VCB & RMU Only complete all as specified and Directed by Engr-In-Charge.
4
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required complete all as specified and Directed by Engr-In-Charge.
20
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in Open/, Wall/ ground including excavation, sand cushioning, protective covering and refilling the trench up to 35 Sqmm complete all as specified and Directed by Engr-In-Charge.Note: As Per Site Condition laying of Cable Open/Wall/Trunch
300
-
-
above 35Sqmm and upto 95Sqmm
150
-
-
above 95Sqmm and upto 185Sqmm
260
-
-
Supply,only ARMOURED XLPE CABLE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5Core 185 sq mm
260
-
-
all as above item but 3.5Core 70Sqmm
150
-
-
all as above item but 2Core 16Sqmm
300
-
-
Supply and fix steel tubular swaged poles type 410 SP-31 (9 meter long) complete with CI base plate and finial including excavation, PCC foundation with 1:4:8, RFR, Removing of soil and coping 1:2:4 complete all as specified and directed by Engr-in-Charge. Note : Including LED Street light 60Watts
6
-
-
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
6
-
-
Wiring for circuit/ submain wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed..
90
-
-
Supply and fixing of Hot press moulded SMC Junction Boxes approx inside dimension (in mm) 350x250x150 with aluminium busbar incl mounting clamp with all accessories complete all as specified and directed by Engr-In-Charge.
6
-
-
Repair and replacement of automatic street light timer switch single phase , Frame Size 1, Max Load 6KW, Digital 24Hours , Contractor Rating (A) 32A TP, MCB Rating 40A SPN, HGS Smarty Series, incl Programmable Time Switch for SLP with complete circuit connection all as specified and directed by Engr-in-Charge. MAke : Havells/Indo-Asian/ or ISI Marked Approved by Engr -in-Charge
1
-
-
M&L for fabrication of outdoor type electrical panel board 415 volt ,3 phase, 4 wire system ,cubical, dust and vermin proof with base frame made out of CRCA sheet of 3.15 MM thick of size 1150X1250X450MM with front opening of aluminium bus bar suitable for 400 amperes capacity and half for neutral on PVC/FRP insulated pads and panel board duly painted with two coat of metal powder coated paint of good approved quality including digital metering , volt meter selector switches, power indicator RYB LED lamps and Current Transformer of suitable ratio with consisting the following electrical fitment and making space and mounting arrangement for incoming/outgoing switch gears including necessary fixing/grouting arrangement on existing floor and trench and connecting all the disconnected underground power cables including lugging and ,crimping and cable glands where ever requires with testing and commissioning to the entire satisfaction of Engr-in-Charge :-embeded in PCC 1:4:8 type D-2 using 40mm graded stone aggragate of foundation as per manufacture instruction complete all as specified and directed comprising of the following controls. (a) MCCB 400 Amps 4Pole FEH Frame : Microprocessor MCCB Ics 75% of Icu 50KA . Make : Havells-01No. (b) MCCB 160 Amps 3Pole FEN Frame : Microprocessor MCCB Ics 100% of Icu 35KA . Make : Havells (c ) MCCB 100 Amps 3Pole FEN Frame : Microprocessor MCCB Ics 100% of Icu 35KA . Make : Havells-04Nos. (d) Volt Meter (o to 500Volt) -06Nos (e) Amper Meter (0 to 600Amps)-06Nos (f) CT 250/5A, Tape wounded, Cl-1-03Nos. (g) Selector Switch -12Nos. (h) Indicator Lamp (set of Three)-03Nos
1
-
-
M&L for fabrication of outdoor type electrical panel board 415 volt ,3 phase, 4 wire system ,cubical, dust and vermin proof with base frame made out of CRCA sheet of 3.15 MM thick of size 1150X1250X450MM with front opening of aluminium bus bar suitable for 400 amperes capacity and half for neutral on PVC/FRP insulated pads and panel board duly painted with two coat of metal powder coated paint of good approved quality including digital metering , volt meter selector switches, power indicator RYB LED lamps and Current Transformer of suitable ratio with consisting the following electrical fitment and making space and mounting arrangement for incoming/outgoing switch gears including necessary fixing/grouting arrangement on existing floor and trench and connecting all the disconnected underground power cables including lugging and ,crimping and cable glands where ever requires with testing and commissioning to the entire satisfaction of Engr-in-Charge :-embeded in PCC 1:4:8 type D-2 using 40mm graded stone aggragate of foundation as per manufacture instruction complete all as specified and directed comprising of the following controls. (a) MCCB 160 Amps 4Pole FEN Frame : Microprocessor MCCB Ics 100% of Icu 35KA -01Nos (main Incomer). Make : Havells (B ) MCB 63 Amps SPN-12Nos.(c) MCB SPN 40Amps -04Nos (d) Volt Meter (o to 500Volt) -01Nos (e) Amper Meter (0 to 600Amps)-01Nos (f) CT 250/5A, Tape wounded, Cl-1-03Nos. (g) Selector Switch -2Nos. (h) Indicator Lamp (set of Three)-03Nos (j) Electric Digital meter single phase 10 to 40Amps -12Nos
1
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
3
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
60
-
-
Providing, laying and fixing of G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling, 50 mm dia complete all as specified and Directed by Engr-In-Charge.
60
-
-
Providing, laying and fixing of G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling, 80 mm dia complete all as specified and Directed by Engr-In-Charge.
30
-
-
SCHEDULE ‘A’ PART-V EXTERNAL WATER SUPPLY WORK (SCHEDULE OF ITEMS) (Make o to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 50 mm ,including fittings (Note : Connection from existing GI pipe line to Bld storage Tank)
250
-
-
Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 32 mm ,including fittings
120
-
-
Providing and fixing PPR Union 50mm dia
6
-
-
Providing and fixing PPR Union 32mm dia
4
-
-
Supply and replacement of PPR Gate valve 50 mm dia
2
-
-
Supply and replacement of PPR Gate valve 32 mm dia
12
-
-
Supply and installation of PVC Storage tank 1000Ltrs Capacity with accessories
12
-
-
Supply and fixing of Float Valve 32mm dia with ball and all accessories
12
-
-
SCHEDULE ‘A’ PART-VI SITE LEVELING (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.All kinds of soil.
1740
-
-
SCHEDULE ‘A’ PART-VII APPROACH ROAD (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
65
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
650
-
-
Supplying and stacking at site. 90 mm to 45 mm size stone aggregate
49.92
-
-
Supplying and stacking at site. 63 mm to 45 mm size stone aggregate
37.44
-
-
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. Qty same as 63-45 mm size Stone Aggregate
39
-
-
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .Qty same as 90-45 mm size Stone Aggregate
29.25
-
-
Supplying and stacking at site. Stone screening 13.2 mm nominal size (Type A).
11.7
-
-
Supplying and stacking at site. Stone screening 11.2 mm nominal size (Type B).
5.85
-
-
Supplying and stacking at site. Red bajri
3.9
-
-
Supplying and stacking at site. Moorum
3.51
-
-
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete.(tack coat to be paid for separately) : With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.
390
-
-
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
130
-
-
Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On W.B.M. @ 0.75 Kg / sqm
390
-
-
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete.
390
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete.
78
-
-
SCHEDULE ‘A’ PART-VIII FOOTPATH WITH PAVER BLOCK (SCHEDULE OF ITEMS) (Make o to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil
30.94
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
21.84
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level.1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
35.1
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
52
-
-
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
260
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
17.55
-
-
SCHEDULE ‘A’ PART-IX SEPTIC TANK (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) I manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 0.00-1.50m
88.74
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) I manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 1.50-3.00m
38.51
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
22.19
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
1.76
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
17.94
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights Foundations, footings, bases of columns, etc. for mass concrete.
7.06
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
94.28
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform.
11.97
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers.
3.49
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls.Under 20 cm wide
17.44
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.
1794
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
11.97
-
-
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
52.89
-
-
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD-20 Circular shape 560 mm internal diameter
2
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
12
-
-
Providing and fixing soil, waste and vent pipes 100 mm dia. Centrifugally cast (spun) iron socketed pipe as per IS: 3989.
3.6
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
SCHEDULE ‘A’ PART-X SEWERAGE LINE (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Excavating trenches of required width for pipes, cable, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.50m including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. All kinds of soil Pipes cables etc. exceeding 80 mm dia. But not exceeding 300mm dia.
150
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
150
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
5.25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
30
-
-
Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse sand) with RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensions, total weight of cover & frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5
11
-
-
Inside size 120 x 90 cm & 90 cm deep including CI cover with frame (Medium duty) 560mm internal diameter, total wt. of cover & frame to be not less than 208 kg (wt. of cover 108 kg and wt. of frame 100 kg) With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5
4
-
-
Extra for depth for manholes: size 90 X 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2.75
-
-
size 120 X 90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Providing and fixing square mouth S. W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 180 x 150 mm. size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 mm diameter round bar
19
-
-
SCHEDULE ‘A’ PART-XI STORM WATER DRAIN (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
135.5
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (40% of Item No. 1)
41.52
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6.96
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).
20.78
-
-
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
28.35
-
-
12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
214.9
-
-
SCHEDULE ‘A’ PART-XII RRM RETAINING WALL/TOE WALL (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
45
-
-
Excavation work by mechnical means (Hydraulic excavator)/manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.Ordinary rock
45
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
42.3
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
10.26
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
35.22
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars.
4226.4
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
37.44
-
-
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)
39.6
-
-
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)Flush/ Ruled/ raised cut pointing
108
-
-
White washing with lime to give an even shade:New work (three or more coats)
108
-
-
Providing and fixing un plasticised Rigid PVC rain water pipe conforming to IS: 13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion,Single socketed pipes. 75mm diametre
20.88
-
-
SCHEDULE ‘A’ PART-XIII Lightening Conductor (SCHEDULE OF ITEMS) (Make to be approved by SO1 (Wks)/ Comdt ARC&MC as applicable)
-
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
20
-
-
M& L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3Nos 8mm dia 25mm long hex, head screw.
20
-
-
M&L for Aluminium Strip 25x3.15mm with saddles and fixing screws etc, for roof conductors and down conductors above ground.
220
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements